s-hadinger
bb40642225
Fix Telegram TLS fingerprint, remove CA validation ( #21514 )
2024-05-27 22:31:27 +02:00
s-hadinger
0a2990de59
Update Telegram CA (Go Daddy Root Certificate Authority - G2) ( #21510 )
2024-05-27 18:21:05 +02:00
s-hadinger
25a2a46917
Matter auto-fix IPv6 link-local zone id when network reconnects ( #21494 )
2024-05-25 19:51:00 +02:00
Theo Arends
3b4035b3e2
Add FUNC_ABOUT_TO_RESTART ( #21460 )
2024-05-21 17:28:02 +02:00
Theo Arends
a4c7add8df
Prep ESP32 SPI bus 2 support
2024-05-21 15:58:16 +02:00
s-hadinger
b9bd558abe
Enabled watchdog for ESP32 and variants ( #21422 )
...
* Enabled watchdog for ESP32 and variants
* Ensure compilation for sageboot
* Fix compilation
* Fix compilation for RISCV
2024-05-16 21:19:34 +02:00
Theo Arends
ac06195907
Remove non IDF5 code
2024-05-15 16:45:42 +02:00
s-hadinger
2865630309
Prepare for ESP32 WDT ( #21383 )
...
* Prepare for ESP32 WDT
* make `sleep()` reset WDT
2024-05-12 21:12:08 +02:00
Theo Arends
141a4086b3
Revert "ESP8266 removed SPI check for valid SPI Chip Select ( #21393 )"
...
This reverts commit 584329a6c0
.
2024-05-09 14:11:57 +02:00
Theo Arends
584329a6c0
ESP8266 removed SPI check for valid SPI Chip Select ( #21393 )
2024-05-09 13:52:07 +02:00
gemu
61814e79fe
fix jpeg compile core3 ( #21387 )
2024-05-08 13:21:14 +02:00
Theo Arends
9314032f69
Fix safeboot logging flood
2024-05-07 11:05:54 +02:00
Anton Gladky
dd161dc732
Replace Let’s Encrypt R3 by ISRG Root X1 one. ( #21352 )
...
According to the blog post [1] new intermediate certificates
will be deployed. Thus R3 certificate, used now will not allow
to setup a secure connection.
This root certificate is valid till 2035/06
2024-05-05 21:19:16 +02:00
Theo Arends
c41f18a9b6
Fix calloc allignment
2024-05-05 18:26:21 +02:00
s-hadinger
3d0532ce8c
Fixed void unwanted OTA upgrade when safeboot starts for the first time ( #21360 )
2024-05-05 18:03:32 +02:00
Jason2866
1e63c8924e
use "minimal" instead of "safeboot" ( #21346 )
2024-05-04 15:34:11 +02:00
s-hadinger
599526a90c
``Publish3`` to send binary data encoded as Hex, disabled in safeboot ( #21345 )
2024-05-04 15:26:07 +02:00
Marius Bezuidenhout
545cc27ca8
Fixed HexToBytes function. Added Publish3 command. ( #21329 )
2024-05-04 14:42:35 +02:00
Jason2866
9168f7b198
More shrink of safeboot ( #21333 )
...
* remove crash recorder from safeboot
* small refactor
* safeboot more shrink
2024-05-03 15:01:31 +02:00
Jason2866
9b8cd42e5f
remove crash recorder from safeboot ( #21332 )
...
* remove crash recorder from safeboot
* small refactor
2024-05-03 14:47:14 +02:00
s-hadinger
041540c80c
Changed internal macro `APP_SLEEP` to `TASMOTA_SLEEP` to specify default sleep in ms ( #21324 )
2024-05-03 09:03:45 +02:00
s-hadinger
18bdf07903
Reduced safeboot size by 2.9KB ( #21322 )
...
* Reduced safeboot size by 2.9KB
* remove leftover
2024-05-02 23:09:56 +02:00
Jason2866
fb78c3a796
Fix PIO Inspect
...
Solo1 framework does not support PSRAM
2024-05-02 13:31:34 +02:00
sfromis
311a9f18e6
Wrong feature bit for USE_SPL06_007 ( #21286 )
...
Obvious "typo" in setting the feature bit for this recently added sensor. Already mentioned in https://github.com/arendst/Tasmota/pull/21185#issuecomment-2071122611
2024-04-27 16:30:57 +02:00
Jason2866
41970f7d62
Disable psram check to avoid "blinking" of GPIO 16/17 at startup ( #21282 )
...
* add `DISABLE_PSRAMCHECK`
* remove code before IDF 5
* add no psram env
2024-04-25 20:19:20 +02:00
s-hadinger
466652549a
Fix faulty printing of IPv4
2024-04-25 11:23:27 +02:00
s-hadinger
2a35f325b8
Put back wifi IPv6 workaround ( #21274 )
2024-04-25 10:28:42 +02:00
s-hadinger
c4431eb6fe
Fixed IPv6 support in safeboot ( #21233 )
2024-04-20 22:15:54 +02:00
Rai
13cbf26b87
Adds support for SPL06_007 Temperature & Pressure I2C (+10k2 code) ( #21185 )
...
* Adds support for SPL06_007 (+10k2 code)
* removes not so used methods.
Removes -2kb
* change doubles to floats
* fixes a name
* change sns idx to 25
2024-04-18 11:20:02 +02:00
s-hadinger
87f5fbd5fd
safeboot: don't publish sensor valies ( #21193 )
2024-04-15 22:20:28 +02:00
s-hadinger
d9895a0fcb
SSD1351, ST7789 drivers replaced with uDisplay ( #21184 )
2024-04-15 19:52:57 +02:00
s-hadinger
a006e5fc53
SSH1106 driver replaced with uDisplay ( #21183 )
2024-04-15 10:57:14 +02:00
s-hadinger
0b4cddff72
SSD1331 driver replaced with uDisplay ( #21177 )
2024-04-14 18:06:17 +02:00
s-hadinger
05f4011491
SSD1306 driver replaced with uDisplay ( #21176 )
2024-04-14 16:46:58 +02:00
s-hadinger
ff43dc29b2
ILI9341 driver replaced with uDisplay ( #21169 )
2024-04-14 10:26:37 +02:00
Theo Arends
d678666ef0
Fix MQTT heatindex calculation
2024-04-08 14:58:31 +02:00
Theo Arends
9cacf2f609
Fix Power off due to overtemp and/ot overload
2024-04-08 12:03:11 +02:00
s-hadinger
541f3630a1
Wifi provide Mac Address on Core3 ( #21117 )
2024-04-07 10:55:53 +02:00
stefanbode
b9a0ae98df
Bugfix: power0 if power_lock is used ( #21102 )
...
* Bug Fix: power_lock with Power0 command
Power0 changed power regardless of the new lock state of power. New implementation respect the LOCK also on global change
* simplify
* readded the all_on filter to power_lock change
readded the all_on to ensure new defined relays always start with power off ass intended.
2024-04-06 17:21:54 +02:00
s-hadinger
2128dfbade
Refactored Wifi for ESP32 to allow for Core3 ( #21106 )
...
* Refactored Wifi for ESP32 to allow for Core3
* Fix case in include
* Grrr
* Fix compilation
* Fix Ethernet IPv6
* Fix wrong hostname due to mac address unknown at start
2024-04-05 23:44:21 +02:00
Theo Arends
ed7909f23f
Removed unused `#define MQTT_DATA_STRING` support
2024-04-04 17:03:08 +02:00
Theo Arends
db92a843fc
Change Wifi 5 to Wifi 6
2024-04-04 14:59:32 +02:00
Theo Arends
6558414e2b
Add PowerLock to status
...
- Change Power format in status to bitmap
2024-04-03 15:02:11 +02:00
Theo Arends
7c36029ec2
Add command ``Wifi 5`` to enable 11ax on ESP32 Core3
2024-04-03 14:36:52 +02:00
Theo Arends
fe89774fe0
Bump version v13.4.0.4
...
- Add command ``PowerLock`` to disable power control of selected outputs (#21081 )
2024-04-03 11:47:38 +02:00
Theo Arends
7774ce5ad8
Update TXPowerBasedOnRssi()
2024-03-29 14:30:31 +01:00
Theo Arends
4b44d2fa32
Change ESP32 WiFi phy modes 11n and 11ax represented as HT20, HT40 and HE20 ( #19350 )
2024-03-29 13:04:44 +01:00
Marcus Better
1a462c986c
[tuyamcu_v2] Fix suppressed dimmer updates from MQTT ( #20950 )
...
The driver tried to avoid loops when state updates from the MCU (eg
from physical button press) could be reflected back by Tasmota and
trigger another MCU command, followed by a state update. It did this
by tracking the source of the command in the last_source and
last_command_source variables, suppressing the command if either of
those was SRC_SWITCH.
However this logic is faulty: Since there are two last_source
variables to check, a command might reset one of them, but the other
would still suppress the update. As it turns out, MQTT commands would
only set last_source but not last_command_source. As a result, any
dimmer changes via MQTT would be dropped by the driver and not applied
to the MCU.
Switch functionality (on/off) was still working because those do not
rely on last_command_source, only last_source.
This change removes the loop detection logic altogether for dimmer
updates. This should be safe, because the driver already has the
latest dimmer value in its shadow state, and will not try to re-apply
a current value, thus breaking the loop.
This patch has been tested with several CE-WF500D dimmers which had
this problem.
2024-03-14 17:42:52 +01:00
Theo Arends
ce419cce81
Add LoRa to ESP8266
2024-02-29 17:12:08 +01:00
s-hadinger
a2bb0afea2
IR support data larger than 64 bits ( #20831 )
2024-02-28 22:42:29 +01:00
Theo Arends
77cba87994
Update changelogs
2024-02-27 14:16:13 +01:00
Theo Arends
9a5217bf90
Add heatindex to BMP driver ( #4771 )
2024-02-19 14:17:40 +01:00
Theo Arends
fb003e006e
Add Show calculated heat index if temperature and humidity is available with ``#define USE_HEAT_INDEX`` ( #4771 )
2024-02-18 18:00:41 +01:00
Theo Arends
1abaf146b5
Fix ESP32 PWM activity on unconfigured PWM GPIOs ( #20732 )
2024-02-17 15:19:12 +01:00
Theo Arends
080cdb4f0d
Add core3 ethernet support on SPI for all ESP32 models
2024-02-14 16:19:51 +01:00
Jason2866
2f32e3c2ee
Fix C2 compile error
2024-02-09 13:53:19 +01:00
Theo Arends
715914bdd0
Add internal support for persistent JSON settings using single file
2024-02-07 22:55:39 +01:00
Fulvio Spelta
ab8676d865
SetOption158 publish/suppress ModbusReceived MQTT messages ( #20678 )
2024-02-07 15:57:09 +01:00
Andrey Osin
478bd0ce17
Fix Wi-Fi scan results process when scanning fails. ( #20631 )
2024-02-03 12:35:13 +01:00
Theo Arends
95b03592dc
Add ISR logging failsafe
2024-01-30 16:57:45 +01:00
Theo Arends
886b453e69
Fix ESP8266 eFuseMac result
2024-01-28 17:34:15 +01:00
Theo Arends
af9d4cadd8
GPIO Viewer update from 1.0.7 to 1.5.0
2024-01-27 23:58:00 +01:00
Theo Arends
5d06a25915
Add ESP32-C3 support for GPIO11 ( #18350 )
2024-01-26 12:13:23 +01:00
Theo Arends
10885fe60d
Refactored rules ``Subscribe`` using LList allowing full message size and enabled by default
2024-01-22 16:57:59 +01:00
Theo Arends
1ffbbc914d
Refactor backlog from LinkedList to TasmotaLList
2024-01-21 22:07:49 +01:00
Theo Arends
95f76d623f
Changed command ``TimedPower`` refactored from String to LList
2024-01-21 14:29:44 +01:00
Theo Arends
9608b7513a
Refactor backlog by removing some str copies
2024-01-20 22:45:24 +01:00
Theo Arends
05014d48cf
Refactor backlog from String to char
2024-01-20 17:18:03 +01:00
Theo Arends
c9d0106007
Removed max number of 30 backlog entries
2024-01-18 16:32:28 +01:00
Theo Arends
0f541a963b
Fix TimedPower blink off
2024-01-18 10:38:22 +01:00
Theo Arends
2832ed914b
Change command ``TimedPower``
...
Change command ``TimedPower`` from erasing all timers to showing remaining timers
2024-01-17 15:55:25 +01:00
Theo Arends
9d00897cb4
Fix TimedPower using state names
2024-01-16 15:07:23 +01:00
Theo Arends
2c5508ee96
Add TimedPower update before end
2024-01-16 12:40:35 +01:00
Theo Arends
77d54985d0
Tune TimedPower
2024-01-16 11:02:24 +01:00
Theo Arends
789fd1e055
Add command ``TimedPower``
...
Add command ``TimedPower<index> <milliseconds>[,ON|OFF|TOGGLE|BLINK]`` executes ``Power<index> [ON|OFF|TOGGLE|BLINK] `` and after <millisecond> executes ``Power<index> [OFF|ON|TOGGLE|OFF]``
2024-01-15 23:58:33 +01:00
s-hadinger
9045a7da83
IP stack compatible with new Core3 IPv6 implementation ( #20509 )
...
* IP stack compatible with new Core3 IPv6 implementation
* Fix compilation
* Forece CI
2024-01-15 21:05:40 +01:00
Theo Arends
c2d6bbf2c1
Code admin
2024-01-10 11:13:19 +01:00
Theo Arends
0d300aebff
Update GPIOViewer
...
- Add ESP8266 PWM state logging
- Add ADC state functions
2024-01-07 15:10:19 +01:00
Theo Arends
13a9c3b5b2
Add delays to wifi init code
...
Add delays to wifi init code to fix some edge power cases.
2023-12-27 17:29:03 +01:00
Theo Arends
e5abd47c86
More syslog explaining
2023-12-21 14:49:37 +01:00
Theo Arends
2f824b1976
Document different syslog layouts
2023-12-21 14:30:49 +01:00
Theo Arends
a445c7f23a
Fix syslog server warning
...
Fix syslog server warning caused by lack of <PRI> field and hostname starting with 'z' (#14689 )
2023-12-20 16:00:27 +01:00
Theo Arends
b81eaf5bc8
Support syslog updates every sleep
...
Support syslog updates every sleep or every second if `#define SYSLOG_UPDATE_SECOND` (#20260 )
2023-12-19 12:45:13 +01:00
budulinek
23b4cd08d4
Realtime syslog ( #20260 )
...
* Realtime Syslog
* Update tasmota.ino
---------
Co-authored-by: Theo Arends <11044339+arendst@users.noreply.github.com>
2023-12-19 12:29:39 +01:00
stefanbode
f19d15654c
Restart 9 support deepsleep with TIMER based wakeup ( #20165 )
...
* Allow restart 9 to use TIMERS for wakeup
* support for restart 9
allow restart 9 to use any defined TIMER to restart a a specific time.
2023-12-05 13:47:53 +01:00
Theo Arends
728f91b602
Update changelogs
2023-12-05 10:07:02 +01:00
Theo Arends
14793c2594
Shorten code and add more comments
2023-12-04 11:44:59 +01:00
Theo Arends
7a6cca6d20
Add command ``WebCanvas``
...
Add command ``WebCanvas linear-gradient(#FF0018 7%,#FFA52C,#FFFF41,#008018,#0000F9,#86007D 93%)`` to set GUI canvas
2023-12-03 15:52:44 +01:00
Theo Arends
28c8f8cf47
Fix PowerOnState on ESP32 ( #20144 )
2023-12-02 17:49:02 +01:00
Theo Arends
b7819bcfac
ESP32 show LHBT background if ``WebColor2`` bit0 is not set. Bit0 is default set using #252525
2023-12-02 16:59:04 +01:00
Theo Arends
ad831418e5
Fix SO51
2023-11-24 11:36:20 +01:00
s-hadinger
1c60527099
Berry `scale_int`, equivalent of `scale_uint` for signed integers ( #20090 )
2023-11-23 11:31:26 +01:00
s-hadinger
1cd13d7f66
Fixed `changeUIntScale` for linearity when expanding range ( #20089 )
2023-11-23 10:57:47 +01:00
Theo Arends
74aa056650
Final fix ESP32C3 relay toggle
...
Final fix ESP32C3 relay toggle on restart (#20030 )
2023-11-17 16:17:29 +01:00
Theo Arends
5297bab041
Revert "Final fix ESP32C3 relay toggle"
...
This reverts commit 4489dba8dd
.
2023-11-17 16:06:45 +01:00
Theo Arends
4489dba8dd
Final fix ESP32C3 relay toggle
...
Final fix ESP32C3 relay toggle on restart (#20030 )
2023-11-17 15:43:42 +01:00
Theo Arends
b02a66a1b6
Fix ESP32C3 relay toggle on restart
...
Fix ESP32C3 relay toggle on restart (#20030 )
2023-11-17 13:02:19 +01:00
Theo Arends
f0162377e2
Fix ESP32-C3 gpio hold
...
Fix ESP32-C3 gpio hold on non-relay gpios (#20030 )
2023-11-16 10:26:21 +01:00
Theo Arends
c1fa07dd51
Fix ESP32C3 ledlink
2023-11-13 10:54:25 +01:00
Theo Arends
098e29d7e0
Update support_esp32.ino
2023-11-10 12:42:13 +01:00