Theo Arends
a5730a76f9
Add command entered to command error and command unknown message
2024-09-17 16:24:45 +02:00
Theo Arends
97970974fc
Refactored I2C drivers HTU21, BH1750 and HYT
2024-09-16 16:27:30 +02:00
Theo Arends
7b8308c36a
Add support for I2C M5Unit (Mini)Scales using HX711 driver
2024-09-12 12:14:32 +02:00
Theo Arends
d8f01ed4c0
Refactor HX711 memory use
2024-09-10 15:59:25 +02:00
gemu
1c730aab86
fix trx pin error ( #22119 )
2024-09-10 14:48:38 +02:00
Theo Arends
1bf6a13d7c
Bump version v14.2.0.4
...
- Add HX711 optional calibration precision option on command ``Sensor34 2 <weight in gram> <precision>`` where `<precision>` is 1 to 10 (#13983 )
2024-09-08 17:32:35 +02:00
gemu
2c5e8749e3
multi trx lines ( #22056 )
2024-09-07 15:29:27 +02:00
Jason2866
069f59d13f
remove irritating space ( #22095 )
2024-09-05 16:51:45 +02:00
Theo Arends
4f62a0deab
Refactor to TimeReacged()
2024-08-18 12:46:23 +02:00
Theo Arends
1b24378da5
Free 500 code bytes on ADC/ESP8266
2024-08-15 12:52:12 +02:00
Theo Arends
b93e6cee7b
Change GUI name of Analog<x> to ADC<x>
2024-08-13 15:11:51 +02:00
Theo Arends
ff46745252
Fix ADC conversion to v14.1.0.4
2024-08-13 13:57:58 +02:00
Theo Arends
85da678132
Fix ADC bad energy jumps
2024-08-10 17:01:14 +02:00
Theo Arends
bcd1a9c986
Fix ADC multiple GPIO parameter storage
2024-08-09 16:11:30 +02:00
Norbert Richter
663fc88373
Update NeoPool comments ( #21920 )
2024-08-07 16:09:53 +02:00
Theo Arends
040ffb33e0
Fix restore ADC energytoday on power cycle
2024-08-06 18:07:26 +02:00
Theo Arends
4f035d18f6
Fix invalid ADC energy reset
2024-08-04 18:06:24 +02:00
Theo Arends
bdec6aed67
Update xsns_02_analog.ino
2024-08-04 16:37:36 +02:00
Theo Arends
469f12abbc
Add ADC support for Shelly Plus RGBW PM
2024-08-04 16:35:02 +02:00
Theo Arends
f6c3064890
Fix ADC migration
2024-08-03 18:03:41 +02:00
Theo Arends
c7faff7ac6
Refactored Analog driver to better support multiple channels
...
- Add command ``AdcGpio<gpio> <parameters>`` to better support ADC configuration
2024-08-03 17:52:47 +02:00
Jan-David Förster
4101ad7303
xsns_14_sht3x.ino - data types adjusted, code size reduced ( #21868 )
...
* code size, data type improvements
* Change temp calculation to int
2024-07-30 22:23:53 +02:00
Theo Arends
a98399367b
Fix analog reset adcparam 1
2024-07-28 18:58:06 +02:00
Theo Arends
88293d7414
Analog GPIO changes
...
- Analog GPIO ``ADC Input`` with ``AdcParam<x> 1,<start_range>,<end_range>,<margin>,1`` provide direct light control
- Analog GPIO ``ADC Voltage`` with ``AdcParam<x> 11,<start_range>,<end_range>,<lowest_voltage>,<highest_voltage>`` provide energy monitoring with dc voltage
- Analog GPIO ``ADC Current`` with ``AdcParam<x> 12,<start_range>,<end_range>,<lowest_current>,<highest_current>`` provide energy monitoring with dc voltage
2024-07-28 18:52:38 +02:00
Theo Arends
87ec0cce21
Revert "Analog GPIO extensions"
...
This reverts commit 7c1cf6a81f
.
2024-07-28 18:47:13 +02:00
Theo Arends
7c1cf6a81f
Analog GPIO extensions
...
- Analog GPIO ``ADC Input`` with ``AdcParam<x> 1,<start_range>,<end_range>,1`` provide direct light control
- Analog GPIO ``ADC Voltage`` with ``AdcParam<x> 11,<start_range>,<end_range>,<lowest_voltage>,<highest_voltage>`` provide energy monitoring with dc voltage
- Analog GPIO ``ADC Current`` with ``AdcParam<x> 12,<start_range>,<end_range>,<lowest_current>,<highest_current>`` provide energy monitoring with dc voltage
2024-07-28 18:33:43 +02:00
Theo Arends
a4e592c776
Refactor analog
...
- Change from double to float where possible
- Fix Voltage/Current energy calculation
2024-07-28 14:15:35 +02:00
Theo Arends
d7c6474104
Add Analog Voltage and Current
2024-07-27 17:11:25 +02:00
Norbert Richter
5abff54bc6
Add NeoPool `NPSetOption<x>` command ( #21850 )
2024-07-27 11:41:06 +02:00
Tarvi Pillessaar
a95e52b375
Neopool relay state detection and reporting fixes ( #21841 )
...
* Neopool: remove space in MQTT relay state response
* Neopool: fix detecting some relay states
2024-07-27 11:39:43 +02:00
Theo Arends
4cf741e6eb
Update xsns_02_analog.ino
2024-07-26 11:02:27 +02:00
Theo Arends
9af25c73d6
Refactor ADC MQ_SAMPLES saving code and RAM
2024-07-26 11:01:09 +02:00
Theo Arends
2f33f8e5a8
Fix Non-ESP32 Analog read resolution
2024-07-25 18:04:01 +02:00
Jan-David Förster
9878a96c0b
Update SHT3X driver to bring it into line with other sensors, e.g., HYT..., and avoid unnecessary I²C reads ( #21816 )
...
* Avoid unnecessary I²C reads, bring code in line with other sensors.
* Update xsns_14_sht3x.ino
fix copyright again
2024-07-22 13:58:17 +02:00
Theo Arends
85bff67d9b
Add support for Wooliis Hall Effect Coulometer or Battery capacity monitor ( #21732 )
2024-07-17 14:14:44 +02:00
lmelette
9c8f3826b2
Added support for Wooliis LCD Coulometer/Battery Monitor ( #21732 )
...
* Added support for Wooliis LCD Coulometer/Battery Monitor
* Adjusted code structures and data types for Wooliis sensor
---------
Co-authored-by: Luca Melette <luca@positive.security>
2024-07-17 12:25:44 +02:00
Christian Baars
13330eb085
Berry: add int8 quantisation to Tensorflow lite driver ( #21763 )
...
* add input quantization, minor fixes
* prevent divideByZero
2024-07-11 23:05:47 +02:00
Jan-David Förster
27083e3664
Bugfix: multiple SHT4x sensors at the same bus, support for SHT40-CD1B ( #21755 )
...
* fixes multiple SHT3X sensor type bug
Important when multiple sensors are present at the same bus. Prior to this fix, multiple SHT3X sensor were detected, but not SHTC3 and SHT4X!
* Update xsns_14_sht3x.ino
Extends I²C address range to include SHT40-CD1B sensors with address 0x46.
* Update I2CDEVICES.md
* Show bus when multiple sensors at different busses
* Make bus number less intrusive
Only show bus number if two sensors or more are active at more than one bus.
* variable renamed
* cleanup
* fix typo
* fix another typo
* Harmonization and saving code size for ESP8266
Harmonization with xsns_09_bmp driver, saving code size for ESP8266
* fix string for webserver
* Display address only if more than one sensor present.
2024-07-10 18:55:51 +02:00
Theo Arends
04a6d5513b
Prep serial IDF 5.2 support
2024-07-04 16:04:59 +02:00
Norbert Richter
843dd17aec
NeoPool add data validation and statistics ( #21721 )
...
Co-authored-by: Theo Arends <11044339+arendst@users.noreply.github.com>
2024-07-04 09:28:01 +02:00
Theo Arends
bf1dace55d
Add ESP32 USE_FLOG support (experimental)
2024-06-25 22:52:15 +02:00
Theo Arends
af1fa724af
Fix non-webserver compilation
2024-06-25 16:36:28 +02:00
Jason2866
aa39e000f7
add C2 as target for BLE ( #21685 )
2024-06-23 21:44:56 +02:00
Theo Arends
ddf762b7cc
Refactor GPS driver
2024-06-23 17:38:54 +02:00
Christian Baars
d15b88f746
improve parser ( #21648 )
2024-06-16 20:54:59 +02:00
Norbert Richter
2ce513f50c
NeoPool make compiler setting available by user_config_override.h ( #21645 )
2024-06-16 17:07:51 +02:00
Theo Arends
d3f8afed29
Fix GPS_VELOCITY ( #18035 )
2024-06-15 16:52:42 +02:00
gemu
cbff86695f
replace vars in descriptor + line ( #21622 )
2024-06-14 10:14:44 +02:00
Norbert Richter
95f6032d86
Change NeoPool using temperature as only frequently changing value for NPTeleperiod ( #21628 )
2024-06-14 10:14:13 +02:00
Theo Arends
7bde0b89d1
Fix QMP6988
2024-06-12 10:50:29 +02:00