6.5.0.12 20190521
* Add AriLux RF control GPIO option "ALux IrSel" (159) replacing "Led4i" (59) for full LED control (#5709)
* Add LED GPIO option "LedLink" (157) and "LedLinki" (158) to select dedicated link status LED (#5709)
* Add support for up to four LEDs related to four power outputs. Enabled when "LedLink(i)" is configured too (#5709)
* Add extended LED power control using command LedPowerX where X is 1 to 4. Enabled when "LedLink(i)" is configured too (#5709)
6.5.0.11 20190517
* Add command SetOption64 0/1 to switch between "-" or "_" as sensor index separator impacting DS18X20, DHT, BMP and SHT3X sensor names (#5689)
6.5.0.11 20190517
* Add user define INDEX_SEPARATOR to control Sensor Name index character which was fixed to "-" (minus) but is now changed to "_" (underscore) for future support.
* This change impacts DS18X20, DHT, BMP and SHT3X sensor names.
6.5.0.10 20190513
* Enable ADC0 by default in my_user_config.h (#5671)
* Add user configurable ADC0 to Module and Template configuration compatible with current FLAG options (#5671)
6.5.0.6 20190409
* Add WebColor parameters to Settings making them persistent and remove the need for using a rule
* Add alternative IRSend command syntax IRSend raw,<freq>,<header mark>,<header space>,<bit mark>,<zero space>,<one space>,<bit stream> (#5610)
6.4.1.14 20190203
* Add SetOption32 until SetOption49 diagnostic information to Status 3 report as replacement for second property value in SetOption property name
* Add Resolution property to Status 3 report providing previous SetOption second value property
6.4.1.11 20190124
* Remove command SetOption14 as it has been superseded by command Interlock
* Remove command SetOption63 as it has been superseded by command Interlock
* Add command Interlock 0 / 1 / 1,2 3,4 .. to control interlock ON/OFF and add up to 8 relays in 1 to 4 interlock groups (#5014)
6.4.1.8 20190107
* Change sonoff_template.h layout regarding optional module flags like ADC0
* Add command SetOption62 1 to force no Button/Switch pullup on dedicated modules. Currently only supported on Shelly2 (#4841)
6.4.1.2 20181228
* Change switch driver making it modular and introduce input filter (#4665, #4724)
* Add define DS18B20_INTERNAL_PULLUP to select internal input pullup when only one DS18B20 sensor is connected eliminating external resistor (#4738)
* Add variable %timestamp% to rules (#4749)
Version 6.2.1 20180905
* Fix possible ambiguity on command parameters if StateText contains numbers only (#3656)
* Fix Wemo emulation to select the first relay when more than one relay is present (#3657)
* Fix possible exception due to buffer overflow (#3659)
* Fix lost energy today and total energy value after power cycle (#3689)
Theo Arends
RevK
Erik