Theo Arends
444f4fcd62
Fix ESP32 32MB program flash size
2023-10-30 15:29:01 +01:00
stefanbode
8540ee37fc
fix on servo and ESp32 ( #19878 )
...
servo did not react same on ESP32 than ESP8266. Changed to TASMOTA pwmapply capabilities
2023-10-30 14:48:32 +01:00
anishsane
be94a6cac8
Fix for CmndHDMIAddr function. ( #19866 )
...
* Fix for CmndHDMIAddr function.
1. Typical values for XdrvMailbox.payload are 0x1000...0x4000. Hence the
check should be (value > 0).
2. Don't overwrite the user supplied value with value read from the hardware.
* Correct the condition in CEC_Device::OnReady.
We should check for _on_ready_cb before calling _on_ready_cb.
2023-10-29 17:14:44 +01:00
Alexander Nagy
b3b0ffd6b0
Adding display.ini for 1.44 inch 128x128 red SPI display ( #19862 )
2023-10-29 13:16:32 +01:00
Theo Arends
26f14caee9
Fix S2 core3 compiles
2023-10-28 16:20:44 +02:00
Norbert Richter
b65f32c5f3
Neopool enhancements for HA ( #19857 )
...
* Add NeoPool hydrolysis setpoint and max
* Add NeoPool command ``NPFiltrationSpeed``
* Change NeoPool topic ``Power`` to ``Powerunit``
* Add ``SO157`` for NeoPool output sensitive data
2023-10-28 14:07:49 +02:00
Jason2866
75ec9da8a2
Refactoring of storing safeboot bin ( #19858 )
...
* Folder for storing safeboot is now configurable
* Platform 2023.10.06
* Platform 2023.10.12
2023-10-28 13:15:31 +02:00
FransOv
0130ce972a
Support of Winsum ZH03B sensor Dust particle sensor in xsns_18_pms5003.ino ( #19850 )
...
* Update xsns_18_pms5003.ino
The Winsum ZH03B sensor is quite similar to the Plantower PMS3003 sensor. The main difference is the response in passive mode. With these changes xsns_18_pms5003.ino can support the ZH03B sensor when PMS_MODEL_ZH03X is defined in the configuration file.
* Update xsns_18_pms5003.ino
2023-10-27 17:34:49 +02:00
Theo Arends
84eaae572c
Fix core 3 S2 USB
2023-10-24 17:00:11 +02:00
Theo Arends
5c395ffc06
Fix core 3 S2 USB
2023-10-24 16:41:36 +02:00
Theo Arends
84ced0fcab
Add ESP32 core v3 auto TasConsole USB or Serial connection by @staars
2023-10-24 16:32:39 +02:00
Barbudor
1d5f55d374
increase MAX_HUE_DEVICES to 32 ( #19820 )
2023-10-23 09:36:39 +02:00
s-hadinger
4f9c7ada04
Fix audio Arduino 3 ( #19819 )
2023-10-22 21:30:36 +02:00
Theo Arends
0ae793a8d4
Save some bytes
2023-10-21 17:37:31 +02:00
Theo Arends
57860b692d
Fix GpioRead ( #19810 )
2023-10-21 17:20:55 +02:00
s-hadinger
356de1a16a
Add command ``GpioRead`` ( #19814 )
...
* Add command ``GpioRead``
* change output
2023-10-21 15:56:40 +02:00
Theo Arends
6efe2ab514
Add I2C bus2 support to LM75AD temperature sensor
2023-10-21 15:42:32 +02:00
Theo Arends
bec0c27750
Add I2C bus2 support to SI1145/6/7 Ultra violet index and light sensor
2023-10-21 15:31:54 +02:00
Theo Arends
bd90363565
Update changelogs
2023-10-21 14:48:12 +02:00
Theo Arends
c91882daeb
Add ADS1115 I2C bus2 support
2023-10-20 17:39:00 +02:00
Theo Arends
7238d857e9
Add SHT3x I2C bus2 support
2023-10-20 14:52:21 +02:00
Theo Arends
f05470bf81
Add HYT I2c bus2 support
2023-10-20 13:35:24 +02:00
Norbert Richter
1f8cd6a259
Fix NeoPool filtration mode display ( #19801 )
2023-10-19 18:01:56 +02:00
Theo Arends
e3253fea8f
Add I2C bus2 support to BH1750
2023-10-19 18:01:12 +02:00
Theo Arends
b39adacc41
Fix HTU21 bus number
2023-10-19 17:44:59 +02:00
Theo Arends
49709807c7
Add I2C bus2 support to HTU temperature sensor
2023-10-19 17:37:19 +02:00
Theo Arends
b6811b2f4e
Prep ESP32 I2C bus2 support
2023-10-19 16:59:53 +02:00
Theo Arends
70287d90ad
Bump v13.2.0.1
2023-10-19 11:45:12 +02:00
stefanbode
d5f506b1e3
reverted back some function and fix frequency storage ( #19791 )
...
* optimize disc write delay during shutter movement
changed to dynamic write delay to ensure no disc write on multiple shutter movement with stepper shutters.
* optimize disc write delay
ensure disc write will be postponed until all shutters stopped
* reverted back to simple version
* removed duplicate obsolete compiler options
2023-10-18 23:41:52 +02:00
Theo Arends
58324da242
Final fix ;-) ( #19763 )
2023-10-18 16:19:13 +02:00
Theo Arends
1fa036f176
Fix unsorted DS18Alias ( #19763 )
2023-10-18 16:12:02 +02:00
Theo Arends
13c6bc91cc
Fix empty name if no DSAlias defined ( #19763 )
2023-10-18 15:15:49 +02:00
stefanbode
2daaa367ff
stepper shutter channel fix ( #19784 )
2023-10-18 11:29:35 +02:00
Christian Baars
17143cea44
remove HomeKit remnants from mi32 legacy driver ( #19782 )
2023-10-17 21:00:46 +02:00
sfromis
ab420b6cc1
DS18x20_USE_ID_AS_NAME in my_user_config.h ( #19777 )
...
Add mention of #define DS18x20_USE_ID_AS_NAME
2023-10-17 11:00:39 +02:00
Christian Baars
b98ad59d11
Delete xsns_62_esp32_mi_homekit.c ( #19778 )
2023-10-17 11:00:02 +02:00
s-hadinger
82858616f6
Zigbee fix timezone when device reads LocalTime attribute ( #19772 )
2023-10-17 09:02:14 +02:00
Barbudor
8e9299ec97
fix mis-order ( #19769 )
...
* fix mis-order
* fix mis-order on esp32 too
2023-10-16 21:47:31 +02:00
bovirus
5a9da83997
Update Italian language ( #19754 )
2023-10-16 16:07:37 +02:00
s-hadinger
367768b00e
Re-enable features for Arduino 3 ( #19761 )
2023-10-16 12:44:05 +02:00
Norbert
a04995a3f4
Update xdrv_63_modbus_bridge.ino, brackets not needed. ( #19759 )
2023-10-16 09:42:55 +02:00
JeroenSt
91ba05ac3b
ModbusBridge write memleak fix (19733) ( #19758 )
...
Co-authored-by: JeroenSt <nospam@nospam.org>
2023-10-16 08:26:26 +02:00
s-hadinger
8467b41290
Teleinfo use Apparent Power as Active Power approximation ( #19756 )
2023-10-16 08:20:07 +02:00
s-hadinger
d3784a26ab
Audio Core3 compilation for ESP32C3 ( #19755 )
2023-10-15 22:46:01 +02:00
stefanbode
124fbf8dcb
fix shutterfrequency change on mutiple channels ( #19737 )
...
* fix shutterfrequency change on mutiple channels
* LEDC channel management for stepper shutter
LEDC channels dynamically assigned to ensure up to 16 shutters can be defined. Number of simultaneous moving shutters is limited by number of LEDC channels.
* bugfix >=
2023-10-15 18:40:26 +02:00
Jason2866
56314e5423
Update de_DE.h
2023-10-15 14:51:11 +02:00
Saentist
715b64dc28
RU Translation fix ( #19746 )
2023-10-15 11:57:53 +02:00
Eduardo Spremolla
b63a061aeb
Update xsns_02_analog.ino for calibrated values on ESP32 ( #19732 )
...
ESP32 ADC has variables errors, but calibrations values are put in eFuses at factory test.
analogReadMilliVolts() from api correct the ADC reading with tata values.
Since now the value are mV and not ADC numbers, the fast solution is to revert it back to ADC numbers:
divide by Vcc => ANALOG_V33*1000 and multiply by ANALOG_RANGE
Other way is to modify all sensor cases to account for the different unit.
2023-10-15 11:57:13 +02:00
s-hadinger
16307bc4b8
More audio refactoring for core3 ( #19749 )
2023-10-15 11:22:20 +02:00
bovirus
67deceeba8
Update Italian language ( #19730 )
2023-10-13 17:50:06 +02:00
Jason2866
2950de0016
rm WifiClientSecure
2023-10-13 16:57:01 +02:00
Theo Arends
0984c01828
Update changelogs
2023-10-13 14:50:51 +02:00
Theo Arends
5cee525d02
Add Active Power Total
...
Add Active Power Total if multiple phases AND both positive and negative values (#19141 )
2023-10-13 13:56:04 +02:00
chefpro
32cbd330aa
Add Rescan and RetryRead to onewire scan for bulletproove onewire ( #19700 )
...
Co-authored-by: Peter Rustler <peter@rustlerit.de>
2023-10-13 11:29:19 +02:00
nusse
f245821828
HC8 sensor support ( #19714 )
...
* HC8 sensor support
* HC8: fix json
* HC8: missing languages
* HC8: move macros to proper locations
---------
Co-authored-by: Daniel Maier <daniel.maier@tu-berlin.de>
2023-10-13 11:28:41 +02:00
Jason2866
a3dcbc6661
Remove `WiFiClientSecure` ( #19725 )
...
* Update HttpClientLight.cpp
* Update HttpClientLight.h
* Update Powerwall.h
* Update xdrv_10_scripter.ino
2023-10-12 20:10:16 +02:00
bovirus
4eefed79ac
Update Italian language ( #19712 )
2023-10-11 17:12:25 +02:00
stefanbode
dade00bf59
Fix shutterfrequency esp32 ( #19717 )
2023-10-11 17:12:07 +02:00
Paul Blacknell
663e6ab21b
Update xsns_110_max17043.ino ( #19709 )
2023-10-09 16:52:56 +02:00
Paul Blacknell
f41e525f5a
fix: account for MAX17043 alert status on start ( #19708 )
2023-10-09 16:14:41 +02:00
Theo Arends
39e0cf574d
Refactor AP1 information
2023-10-09 11:33:24 +02:00
tyler.li
a1cce95c08
MAX31855/MAX6675 sensors driver support up to 6 ( #19704 )
...
* Support multiple MAX31855/MAX6675 sensor up to 6
* code format
* revert tasmota_template_legacy.h
* revert original variable names
* revert original variable names
---------
Co-authored-by: arendst <mhtarends@gmail.com>
Co-authored-by: litao07 <litao07@kuaishou.com>
2023-10-09 10:44:24 +02:00
SteWers
6bec09b23f
[WebUI] WiFi Information ( #19705 )
...
* [WebUI] WiFi Information
Structured and more infos on WebUI Information page
* [WebUI] WiFi Info multiple lines
Divide one long line into multiple short lines
2023-10-09 08:39:12 +02:00
chefpro
9fbb4a8b0b
Fix modbus receive handling for float types ( #19697 )
...
Co-authored-by: Peter Rustler <peter@rustlerit.de>
2023-10-08 13:14:53 +02:00
s-hadinger
8c6788c6bc
Audio exclusive mode ( #19698 )
2023-10-07 22:11:37 +02:00
s-hadinger
bf9c5b86c6
Remove warnings when compiling Audio with Arduino 3 ( #19687 )
2023-10-06 19:47:10 +02:00
Theo Arends
74bcbd898e
Fix compilation when webserver disabled
2023-10-06 12:17:37 +02:00
Theo Arends
21ac018d70
Fix compile error
2023-10-06 11:23:58 +02:00
Matteo Albinola
2302d38eb0
Windmeter: add measure interval setting ( #19542 )
...
* Add new setting windmeter_measure_intvl and update speed computation
* Ensure windmeter_measure_intvl is not below 1
* Keep same settings order in response messages and add better comments
2023-10-06 10:53:38 +02:00
s-hadinger
c5c78f45d0
Fix audio_slm.be
2023-10-06 08:11:29 +02:00
s-hadinger
11aad19800
Audio support for Microphone + Berry ( #19677 )
2023-10-05 21:47:07 +02:00
Theo Arends
d96ed15e95
Bump version v3.1.0.4
2023-10-04 13:52:08 +02:00
Theo Arends
99df8edc2d
Fix ESP32 chip version number
2023-10-04 12:47:58 +02:00
s-hadinger
473a8ee999
Audio refactoring, filters and I2SConfig ( #19662 )
2023-10-03 22:39:02 +02:00
s-hadinger
e32c39f21d
Fix access to version from Berry
2023-10-03 19:21:47 +02:00
Christian Baars
58d43333f5
conform to API changes ( #19654 )
2023-10-03 16:20:48 +02:00
s-hadinger
77cba731b9
Partition_Wizard compatible with grow on mount ( #19645 )
2023-10-02 23:32:55 +02:00
s-hadinger
795a194d65
Audio prepare for Arduino3 ( #19637 )
2023-10-02 09:18:53 +02:00
Christian Baars
f0b7984466
MI32 legacy: add mi32name, small fixes ( #19619 )
...
* add mi32name, small fixes
* remove unused variable
2023-09-29 17:47:17 +02:00
stefanbode
540acdc638
smaller fixes ( #19621 )
...
* position report during moverment
during moving the teleperiod will now report the actual position
* fix error on inverted shutter
2023-09-29 17:46:41 +02:00
Barbudor
335e18e8cb
Allow webbutton up to 32 ( #19580 )
...
* Allow webbutton up to 32
* use named const
2023-09-29 09:56:52 +02:00
gemu
3bcdf9487d
fix compile error with new email lib ( #19608 )
2023-09-27 18:36:38 +02:00
stefanbode
955d2d86dd
fix JSON Bug ( #19607 )
2023-09-27 16:05:32 +02:00
s-hadinger
31e56903c5
Audio refactoring and fixes ( #19594 )
2023-09-25 23:31:32 +02:00
stefanbode
0f6b59f67e
fix #16560 ( #19589 )
...
shutter reacted on QUAD press with HOLD event. Fixed
2023-09-25 09:25:45 +02:00
s-hadinger
74900edc96
Audio change of configuration file format ( #19585 )
2023-09-24 18:59:43 +02:00
Christoph Friese
5d97a73ddf
Add ENS16x (air quality) and ENS210 (temp & RH) sensors ( #19479 )
...
* Add files via upload
Added ENS16x library enabling read-out of ENS160 and ENS161 sensor component (follow-up of CCS811 and iAQcore)
Added ENS210 library to read out ENS210 temperature & humidity sensor
* Add files via upload
Add air quality sensor readout for ENS160 and ENS161 checking two possible I2C addresses (follow up sensor for CCS811 and iAQcore)
Add temperature and humidity sensor readout checking two possible I2C addresses
* Update BUILDS.md
Add USE_ENS16x and USE_ENS210
* Update decode-status.py
Add USE_ENS16x and ENS210
* Update I2CDEVICES.md
Add USE_ENS16x and USE_ENS210
* Update my_user_config.h
Add USE_ENS16x and USE_ENS210
* Update support_features.ino
Add USE_ENS16x and USE_ENS210
* Update tasmota_configurations.h
Add USE_ENS16x and ENS210
* Update tasmota_configurations_ESP32.h
Add USE_ENS16x and USE_ENS210
* Update xsns_111_ens16x.ino
Corrected I2X number
* Update xsns_112_ens210.ino
Corrected I2C number
* Disable USE_ENS16x and USE_ENS210 by default
* Added code size information
* cut down in libs
* optimize tasmota side
* fix ens16x web display
* final fix on alternate addresses
* update code & RAM usage
---------
Co-authored-by: Barbudor <barbudor@barbudor.net>
2023-09-24 18:30:15 +02:00
Barbudor
0d7c2dee72
support https URL ( #19582 )
2023-09-24 15:39:20 +02:00
s-hadinger
81d287a3b0
Berry fix audio MP3 ( #19578 )
2023-09-23 12:23:51 +02:00
s-hadinger
375c825d32
More cleaning of audio for ESP32 ( #19577 )
2023-09-23 11:25:58 +02:00
s-hadinger
06da24df83
Update berry scripts for Shelly ( #19535 )
2023-09-22 17:32:34 +02:00
Andrew Klaus
3061b06f3b
Adding SGP40 support to SGP4X driver ( #19560 )
2023-09-22 10:15:04 +02:00
stefanbode
7a75eb7021
Improvement in shuttersetup ( #19565 )
...
* Improvement in shuttersetup
- reduce call of energy to 10x a sec.
- stop detection more rigid to avoid wrong messages
- more accurate calculation of duration
* fix energy hickup on autosetup
2023-09-22 08:38:01 +02:00
s-hadinger
761ddaa57b
Berry counter 0-base ( #19561 )
2023-09-21 09:42:28 +02:00
s-hadinger
7de25acac0
Minor refactoring of audio code for Arduino3 ( #19559 )
2023-09-21 09:00:28 +02:00
s-hadinger
fc513af351
Berry counter ( #19558 )
...
* Berry read and write Counters
* rename counter
2023-09-20 22:28:40 +02:00
Theo Arends
ffd09da89a
Fix DS18B20 for ESP32 with over 33 gpios
2023-09-19 15:20:10 +02:00
s-hadinger
ddeb380a19
I2S improvements to MP3 play ( #19547 )
2023-09-18 22:49:49 +02:00
Christian Baars
d6a9eaf8aa
Preps for IDF5.1: microphone/input for i2s audio ( #19544 )
2023-09-18 20:39:15 +02:00
s-hadinger
2d0339e8bf
Fix IR compilation for ESP32 with Arduino3 ( #19537 )
2023-09-17 21:12:36 +02:00
Paul Blacknell
d2aee662fd
fix: add command data to cmnd response ( #19524 )
2023-09-15 22:16:27 +02:00
Theo Arends
d595e64600
Bump version v13.1.0.3
2023-09-14 15:49:31 +02:00
Theo Arends
81fc4e336b
Fix Arduino3 compilation
2023-09-14 14:17:51 +02:00
Theo Arends
2682d82628
Fix ESP32C3 relay click on restart
2023-09-13 23:16:38 +02:00
s-hadinger
00bd97fdc7
Matter virtual lights ( #19511 )
2023-09-13 22:49:46 +02:00
Theo Arends
860e12b88a
Add frequency to BL0942
2023-09-13 15:49:14 +02:00
Theo Arends
fffd68ad9c
Fix BL0942 higher baudrates
2023-09-13 15:09:30 +02:00
gemu
cb4671ee88
fix hardware serial port swap on ESP8266 ( #19505 )
2023-09-13 09:09:01 +02:00
Theo Arends
088ac1815b
Add BL0942 baudrate selection
2023-09-12 21:48:13 +02:00
Theo Arends
ee43b43add
Fix ESP8266 compilation ( #19485 )
2023-09-12 15:01:30 +02:00
Theo Arends
16aab339e7
Clean up support command code
2023-09-11 11:45:27 +02:00
Theo Arends
597c3655b0
Fix MAX17043 invalid JSON ( #19495 )
2023-09-11 11:35:26 +02:00
Paul Blacknell
728b1b2d36
Update xdrv_29_deepsleep.ino ( #19492 )
2023-09-10 22:35:54 +02:00
Paul Blacknell
b117164993
Improved parsing of accumulation data from HRG-15 rain sensor ( #19485 )
...
* fix: more robust parsing of accumulation data
* fix: further parsing checks
2023-09-10 22:33:54 +02:00
Theo Arends
0e6a012499
Fix possible MQTT disconnect exception
2023-09-09 23:30:55 +02:00
Theo Arends
f9fd813842
Fix core 2.0.12 exception
2023-09-09 23:04:08 +02:00
s-hadinger
4c6ff44e42
Zigbee fix warnings with Arduino3 ( #19486 )
2023-09-09 15:27:16 +02:00
s-hadinger
f1bd9446d5
Matter events phase 1 ( #19484 )
2023-09-09 14:50:40 +02:00
Paul Blacknell
4cc81f0dbc
Don't reset the MAX17043 battery fuel gauge after waking from Deep Sleep ( #19412 )
...
* fix: don't reset the device when coming out of deep sleep
* fix: move debug log message to inside the device validation
* Update xsns_110_max17043.ino
* add: update global battery percentage when max17043 reports new value
2023-09-09 09:48:30 +02:00
s-hadinger
4100682297
Fix TLS by removing redundant BearSSL code from libmail ( #19472 )
2023-09-06 20:12:59 +02:00
stefanbode
f7775b5194
cosmetic changes only ( #19468 )
...
- reorder functions alphabetically
- reformat equations for better reading following guidelines
- adding comment for understanding
2023-09-06 16:52:40 +02:00
s-hadinger
f4bc7c34c6
Support for IPv6 link-local zones for esp-idf 5.1 ( #19469 )
2023-09-06 14:48:12 +02:00
stefanbode
3cb63bcb67
Enable multipress events on buttons ( #19465 )
2023-09-06 09:37:29 +02:00
s-hadinger
c2f8821b2f
`Sendmail` upgraded to ESP-Mail-Client v3.4.9 from v1.2.0, using BearSSL instead of MbedTLS ( #19460 )
...
* `Sendmail` upgraded to ESP-Mail-Client v3.4.9 from v1.2.0, using BearSSL instead of MbedTLS
* Fix compilation on ESP8266
* Fix compilation
* fix compilation
2023-09-04 23:00:37 +02:00
stefanbode
1ea12583d1
Fix migration error to filesystem settings ( #19454 )
2023-09-04 21:36:45 +02:00
s-hadinger
c6938e2048
Reduce IRAM consumption of HDMI CEC to 1453 bytes ( #19452 )
...
* Reduce IRAM consumption of HDMI CEC to 1453 bytes
* Add changelog
2023-09-03 23:15:33 +02:00
s-hadinger
bb4d99114a
Berry move mapping from C++ to C ( #19450 )
2023-09-03 22:50:03 +02:00
s-hadinger
fe0423c6cd
Berry cleaned udp class ( #19449 )
2023-09-03 21:49:35 +02:00
s-hadinger
a781ba3fc2
Fix compilation on Arduino 3 ( #19447 )
...
* Fix compilation on Arduino 3
* Fix compilation
2023-09-03 19:02:44 +02:00
s-hadinger
4cb8b987a4
Berry move solidified code to C ( #19446 )
2023-09-03 18:30:22 +02:00
bovirus
262c8b421b
Update italian language ( #19442 )
2023-09-03 12:23:48 +02:00
Christian Baars
4f6afbf849
all output parts for I2S and IDF5.1 ( #19440 )
2023-09-02 22:07:20 +02:00
s-hadinger
f4b3574ed4
Berry fast_loop is now called every 5ms whatever the Sleep value ( #19436 )
2023-09-02 11:10:50 +02:00
s-hadinger
f7c4c16a9c
Support for HDMI CEC protocol ( #19434 )
2023-09-01 21:46:18 +02:00
Theo Arends
48cf04db3a
Fixed PCF8574 mode 1
...
- Fixed PCF8574 mode 1 with base relays exception 3/28 regression from v12.4.0.4 (#19408 )
- Bump version v13.1.0.2
2023-08-31 15:15:18 +02:00
stefanbode
2bae1f4368
sorry... ( #19429 )
2023-08-31 10:50:29 +02:00
stefanbode
3301875983
Added compiler option for doubleclick window ( #19428 )
2023-08-31 08:09:25 +02:00
Theo Arends
ff17a377cc
Allow display of revision v0.0
2023-08-30 16:03:03 +02:00
Theo Arends
62c36a49b3
Add ESP32-C6 GPIO26/28 in template
...
Add ESP32-C6 GPIO26/28 in template as Red pins used by flash (QIO) but optionally free if DIO/DOUT
2023-08-30 15:14:46 +02:00
Christian Baars
8e8e019e0f
expected changes for arduino30 ( #19421 )
2023-08-30 14:17:21 +02:00
Norbert Richter
39083b6add
Fix xdrv_122_file_settings_demo buffer overflow ( #19405 )
2023-08-29 19:53:40 +02:00
Theo Arends
a4cfc414be
Final change to GUI twilight
2023-08-29 19:49:20 +02:00
Jason2866
4ebcd89b4f
enable more driver for Arduino 3.0
2023-08-29 19:09:06 +02:00
Barbudor
5395b8c4bd
fix and improve pzem_dc ( #19402 )
2023-08-27 22:49:24 +02:00
Theo Arends
23d6c0f5d5
Add twilight info to GUI ( #19334 )
2023-08-27 17:24:33 +02:00
SteWers
dd8b85282a
EnergyMargins - always send MQTT telemetry message ( #19397 )
2023-08-27 10:53:04 +02:00
Theo Arends
3ed1bead44
Update decode-status
2023-08-26 16:20:46 +02:00
Andre H. Beckedorf
8683bc7722
Added passive mode for Sen5x sensor (required for Ike@ Vindstyrka) ( #19388 )
...
* Added a passive mode in sen5x sensor for parasitic installations. This skips reset & initialization of sensor on startup and reduces the polling to every 10 seconds to not interfere with and confuse the other I2C master on the bus, e.g. Ike* Vindstyrka.
* Removed obsolete updateCount. Cleanup.
2023-08-26 16:14:30 +02:00
s-hadinger
ab94b16d8d
Fix IRHVAC crash v2
2023-08-26 15:04:08 +02:00
Theo Arends
d4c1315248
Allow ADE7880 user defines ( #19391 )
2023-08-26 14:50:33 +02:00
s-hadinger
4ad3070558
Fix crash in IRHVAC ( #19389 )
2023-08-26 10:17:53 +02:00
Theo Arends
7f24d2027f
Fix rotary edge cases ( #19164 )
2023-08-25 17:06:27 +02:00
xsp1989
9bb9ea0941
translate label ( #19385 )
2023-08-25 13:17:31 +02:00
Theo Arends
03c72501a5
Finally add ESP32-P4 ;-)
2023-08-25 13:11:00 +02:00
Theo Arends
d5b12c8718
Consolidate esp32 hardware info
2023-08-25 12:48:35 +02:00
Theo Arends
b1fba92e87
Fix idf chip revision
2023-08-25 10:55:20 +02:00
Charles
87735fb232
Teleinfo power fix ( #19381 )
...
* fix power #19244
* cosmetic display
2023-08-25 09:38:36 +02:00
Theo Arends
d340c91cd7
Revert "Fix idf chip revision"
...
This reverts commit e5cb367581
.
2023-08-24 20:52:36 +02:00
Theo Arends
e5cb367581
Fix idf chip revision
2023-08-24 17:48:41 +02:00
Theo Arends
9b6efc674d
Fix compilation
2023-08-24 15:17:04 +02:00
stefanbode
d1e85635e3
fix inverted shutter inconsistencies ( #19374 )
...
* inverted shutter fix on overflow
* fix inverted_shutter > 9
fix on inverted shutter at esp32.
fix tilt behavior on inverted shutter
* fix tilt behavior on inverted shutter
2023-08-24 12:39:42 +02:00
Christian Baars
65a1a4feeb
Neopixel add SPI driver for C2 and some minor updates ( #19372 )
2023-08-24 10:34:17 +02:00
Theo Arends
0d80e639ef
Fix Core 3 compilation
2023-08-23 15:29:42 +02:00
Theo Arends
701d33f645
Phase 2 support C2/C6
2023-08-23 13:02:13 +02:00
stefanbode
ca14dc5507
Shutter ESP32 fixes ( #19362 )
...
* fix esp32 shutter
* fix shutterinvert+shutterbutton
2023-08-22 09:21:30 +02:00
btsimonh
c9b5e5ab1f
Add new webcam driver over latest dev. ( #19280 )
...
* Add new webcam driver over latest dev. To use the old one, define USE_WEBCAM_LAGACY
* enable build without RTSP.
check pin_pwdn before using it n 0x105!!!
* more fixes around pwdn. Make wcresolution -1 set the resoltuion setting to 'disbale cam' value (15).
* fix task stop - wait for debug to leave-> prevents guru. pin task to core 0.
* split motion from other code. Add USE_WEBCAM_MOTION to control inclusion of motion code (big hit). Change from using USE_WEBCAM_LEGACY to USE_WEBCAM_V2
* logging minimisation - behind WEBCAM_DEV_DEBUG
2023-08-22 08:24:05 +02:00
Theo Arends
dd877972be
Phase 1 support C2/C6
2023-08-21 17:10:06 +02:00
Theo Arends
37a527696a
Phase 1 support C2/C6
2023-08-21 16:18:21 +02:00
Theo Arends
0c3b559630
Phase 1 support C2/C6
2023-08-21 16:00:20 +02:00
Theo Arends
5b3b2a7a62
Changed display invert setting
...
Changed display invert setting after tasmota start in uDisplay driver (#19337 )
2023-08-18 11:34:01 +02:00
stefanbode
7927c989c4
fix shutterinvert ( #19341 )
...
* fix shutterinvert
* fix shutterinvert
2023-08-18 09:02:17 +02:00
Theo Arends
2eaa0fcb67
Update switch comments
2023-08-17 23:28:27 +02:00
Theo Arends
b8804cf2a8
Add variables to rules
...
Add variables ``%power<1..28>%`` and ``%switch<1..28>%`` to rules (#19331 )
2023-08-17 15:34:13 +02:00
Paul Blacknell
aa097e9034
add: shutdown command for PID controller ( #19318 )
2023-08-16 11:17:54 +02:00
Theo Arends
d9530f32a6
Sync dev with release v13.1
2023-08-15 10:37:54 +02:00
Paul Blacknell
be88e701d9
Add commands to allow setting of timeprop parameters ( #19310 )
...
* add: commands to set timeprop settings
* Update my_user_config.h
* fix: properly generated json response to commands
2023-08-15 09:43:55 +02:00
paulusbrand
877d4250bb
Removes software based no load threshold. ( #19302 )
...
Lowers ADE7953 builtin no load detection threshold to be able to measure 5 watt power levels.
2023-08-14 10:08:16 +02:00
SteWers
f40f4a1947
[DS18x20] Enhance use of aliases ( #19026 )
...
* [DS18x20] Enhance use of aliases
`defineDS18x20_USE_ID_AS_NAME`:
Always show part of the address, even for one sensor
`#define DS18x20_USE_ID_ALIAS`:
The command `DS18Alias` can now be use with alphanumeric aliases, which replace the sensor name
* [DS18x20] change to calloc()
2023-08-12 14:57:58 +02:00
Paul Blacknell
df1a526f02
fix: properly detect device is offline after maximum misses reached ( #19298 )
2023-08-12 11:32:29 +02:00
Christian Baars
b5cc48dd64
ESP32: pass flashmode at build time to macro definition ( #19299 )
...
* pass flashmode at build time to macro definition
* fix 8266 builds
2023-08-12 11:31:06 +02:00
Paul Blacknell
9eb184c30e
Improvements to PID controller driver ( #19285 )
...
* add: update DEBUG_THERMOSTAT to only control the virtual switch
Also, debug output is still generated but end user can control this debug level 3
* add: debug output of main controller parameters when thermostat enabled
Also, add units for debug outputs added to make them more intelligible
* Update xdrv_39_thermostat.ino
* add: debug message when sensor is detected as not alive
fix: display thermostat number in debug messages
* add: log message prefix string for thermostat
* Update xdrv_39_thermostat.ino
fix: typos in comments
add: debug messages
* add: debug prefix for thermostat
* add: debug prefix added to output lines
* fix: comment typos and small grammatical changes for clarity
* add: debug prefix 'THE' added to debug output
* add: display PID status and key info on web output
* fix: remove extraneous comments that included unused code fragments
* add: local sensor handling improvements
add: define a local sensor name
add: define the local sensor measurement parameter
add: limit sensor not seen error message to every 60 seconds to avoid flooding the logs
add: include interval since which sensor data was last updated
fix: properly update the maximum interval time so missing sensor data is properly alerted
* Update xdrv_49_pid.ino
2023-08-10 16:20:06 +02:00
Christian Baars
7544d2f23c
fix IRAM_ATTR specified both in function declaration and definition ( #19286 )
2023-08-10 12:19:18 +02:00
Paul Blacknell
c3fadde3e8
Improvements to thermostat debug output ( #19279 )
...
* add: update DEBUG_THERMOSTAT to only control the virtual switch
Also, debug output is still generated but end user can control this debug level 3
* add: debug output of main controller parameters when thermostat enabled
Also, add units for debug outputs added to make them more intelligible
* Update xdrv_39_thermostat.ino
* add: debug message when sensor is detected as not alive
fix: display thermostat number in debug messages
* add: log message prefix string for thermostat
* Update xdrv_39_thermostat.ino
fix: typos in comments
add: debug messages
* add: debug prefix for thermostat
* add: debug prefix added to output lines
* fix: comment typos and small grammatical changes for clarity
* add: debug prefix 'THE' added to debug output
2023-08-08 10:55:05 +02:00
Christian Baars
76aa6747a5
more idf5.1 preps: Berry SPI ( #19273 )
2023-08-06 21:10:36 +02:00
Jason2866
7488ed03f0
Tasmota based on Arduino 3.0.0 ( #19270 )
2023-08-06 13:44:28 +02:00
s-hadinger
0b3d6fd146
Prepare for Arduino v3 / esp-idf v5 2nd batch ( #19265 )
2023-08-05 20:34:24 +02:00
Theo Arends
e52c6105c6
Bump version to v13.0.0.4
2023-08-05 15:41:12 +02:00
s-hadinger
5c8c7cdfca
Prepare for Arduino v3 / esp-idf v5 ( #19264 )
2023-08-05 15:11:10 +02:00
usr44
ab9a519d32
Update ru_RU.h ( #19214 )
2023-08-05 14:52:25 +02:00
stefanbode
959d105413
Change shutterbutton hold behavior with grouptopic ( #19263 )
...
* skip stop on hold if grouptopic
If shutterbutton is defined with a grouptopic send on HOLD, there is no stop on releasing the button. All shutters will move to defined position
* do not stop on hold release if group submitt
If mqtt broadcast is defined on hold then release the hold button will not anymore stop the local shutter. All shutter will move to defined position
2023-08-05 14:51:56 +02:00
Theo Arends
7c3c3855c4
Fix console Firefox layout
2023-08-05 12:35:03 +02:00
Theo Arends
fc798540b7
Fix console min height
2023-08-05 11:56:06 +02:00
s-hadinger
362326f004
Zigbee Berry minor fix and cleaning ( #19257 )
...
* Zigbee Berry minor fix and cleaning
* Fix compilation
2023-08-05 09:50:39 +02:00
Christian Baars
732e4106b8
add wifitest3 ( #19259 )
2023-08-04 20:17:36 +02:00
Theo Arends
e2c79b45e4
Save some more code bytes
2023-08-04 17:24:05 +02:00
Theo Arends
7736ba8af1
Change console height
...
Change console height from default 318 pixels to viewport (#19241 )
2023-08-04 16:11:58 +02:00
stefanbode
6572f0ed39
Fixing SHUTTERINVERT issues ( #19243 )
...
* fix wrong inverted shutter
* fix inverted shutter for esp32
2023-08-03 11:55:20 +02:00
Vincent de Groot
5e591ef7db
Integrate MAX17043 driver mechanisms in xsns_110 ( #19219 )
2023-08-03 11:54:41 +02:00
s-hadinger
df50a56c25
Fade would fail when the difference between start and target would be too small ( #19246 )
2023-08-02 17:48:12 +02:00
stefanbode
355b1e3b74
unsigned overflow fixed ( #19221 )
...
fixed overflow on negative value with dimmer 100%
2023-07-30 15:01:21 +02:00
s-hadinger
2c15cfe4da
Reduced log level for TeleInfo ( #19216 )
2023-07-29 23:09:03 +02:00
msedv
fb45e73384
Four files which used #ifdef EPS8266 instead of #ifdef ESP8266 - which e.g. broke the MFRC522 functionality between 12.5 and 13.x. ( #19209 )
2023-07-29 16:50:27 +02:00
s-hadinger
f2ab3b36a9
Zigbee decode Aqara 0000/FF01 attribute 03 as Temperature ( #19210 )
...
* Zigbee decode Aqara 0000/FF01 attribute 03 as Temperature
* Changed to AqaraTemperature
2023-07-29 14:19:15 +02:00
stefanbode
de3b0a4b00
ensure minimum interrupt time ( #19211 )
...
prevent interrupts <30 micro seconds because sometimes see crashes on esp8266.
esp32 stop of interrupt >30microseconds and < 105microseconds
2023-07-29 14:15:00 +02:00
s-hadinger
11f056040e
Make TCPStart ip filter more IPv6 friendly ( #19199 )
2023-07-26 22:52:48 +02:00
s-hadinger
1a91dc441b
Berry improve tasmota.scale_uint() ( #19197 )
2023-07-26 22:31:22 +02:00
s-hadinger
9f16f09f29
Berry `mqtt.publish` now distinguishes between `string` and `bytes` ( #19196 )
2023-07-26 19:54:14 +02:00
Theo Arends
978a21240c
Update changelogs
2023-07-24 15:30:48 +02:00
Theo Arends
0ddcea9905
Add alternative for PCA9685
...
Add alternative for PCA9685 as define PCA9685_V2 (#18805 )
2023-07-24 15:11:20 +02:00
Theo Arends
17cf73595f
Refactor MAX17043 driver
...
Refactor MAX17043 driver optional enable library (default off providing smaller footprint (-250 bytes)
2023-07-24 14:28:57 +02:00
Theo Arends
f626539c18
Refactor MAX17043 driver
2023-07-24 12:29:43 +02:00
Jason2866
c5be85f443
Update de_DE.h
2023-07-23 14:13:23 +02:00
gemu
994c105bda
fix empty line problem ( #19171 )
2023-07-23 11:55:01 +02:00
Vincent de Groot
547169c57d
changing reference to xsns109 ( #19170 )
2023-07-23 11:30:44 +02:00
bovirus
31c3555d4d
Update italian language ( #19169 )
2023-07-23 09:39:17 +02:00
s-hadinger
6d3aedcafe
Berry SK6812_GRBW crash ( #19166 )
2023-07-22 21:51:37 +02:00
Theo Arends
421c95a51b
Update change logs
2023-07-22 14:55:20 +02:00
Vincent de Groot
bc41500d9c
MAX17043 sensor integration ( #18788 )
...
* Restart MAX17043 from the scratch
* revert change
* Changed battery capacity in charge (capacity is the Ah value of the battery, this degrades over time when battery ages)
* merge
* Changing xsns_109 to 110
* fix nr
* removed old xsns109
* Update I2CDEVICES.md
* clean-up usage of Interface
2023-07-22 13:33:47 +02:00
Theo Arends
973ce106e7
Fix compilation ( #19134 )
2023-07-22 11:28:23 +02:00
Theo Arends
c7a22f175b
Update changelogs
2023-07-21 14:55:06 +02:00
Theo Arends
b149443691
Fix default battery level
...
- Fix default battery level (#19160 )
- Bump version to v13.0.0.3
2023-07-21 14:35:22 +02:00
s-hadinger
758b0237b4
Matter latency improvement for single attribute reads and single commands ( #19158 )
2023-07-20 21:26:55 +02:00
stefanbode
d1a4296867
New DEEPSLEEP topic for HA + Battery Level % support ( #19134 )
...
* New LWT on deepsleep
To allow better integration into HA LWT topic will report details of sleep status:
16:54:04.388 MQT: hm/tele/ESP_3284D1/LWT =
{"Sleep":{"Time":"2023-07-17T16:55:03","Sleep":1689612844,"Wakeup":1689612903}}
* Revert LWT back to non JSON
Send DeelSleep on LWT
Send Deepsleep parameters on topic DeepSleep
* Setting default for batteryLevel
* Enable BatteryPercentSet
Changing the battery level e.g. by rule
* Added Battery % to status message
* added battery_level_percent
* Added battery % support in STATE message
* Enable setting battery level
101 is reserved for power-plug. No battery Level reported
* Setting default for battery Level
101 is reserved for power plug
0..100 normal battery values
* Revert back LWT to Offline
Removed "DeepSleep" LWT status until further decision is made. Current implementation is technical sufficient for HA to detect a battery powered device
* Added discovery message after deepsleep change
* Added discovery for battery and deepsleep
2023-07-20 09:51:08 +02:00
s-hadinger
3da5124348
Berry add AES CCM decrypting in a single call to avoid any object allocation ( #19153 )
2023-07-19 21:15:08 +02:00
s-hadinger
2a3690b866
Berry `tasmota.loglevel()` and `tasmota.rtc_utc()` for faster performance ( #19152 )
2023-07-19 20:58:50 +02:00
s-hadinger
91f15d228b
Zigbee DIYRuZ_Geiger ( #19151 )
2023-07-19 20:41:49 +02:00
sfromis
6382c2806c
More user-friendly defaults for DisplayMode and DisplayDimmer ( #19138 )
...
Changing default for DisplayMode from 1 to 0. Users are getting confused by the display doing something they did not ask for (and not being aware of DisplayMode). This got worse with LVGL/HASPmota displays becoming common, with users having much less reason to dive into the old DisplayXxxxx commands. And it may even be hard to see that it is even a display of time/date causing the display to flicker.
Changing default for DisplayDimmer from 10% to 50%. The low brightness of 10% is not always easy to see, especially in daylight. 50% is generally better, while not going "full blast" with 100%.
2023-07-18 08:26:51 +02:00
s-hadinger
ada754c582
Berry add `energy.update_total()` to call `EnergyUpdateTotal()` from energy driver ( #19117 )
2023-07-15 17:06:10 +02:00
stefanbode
ebca2f0a07
Zero-Cross Dimmer fixes ( #19109 )
...
* Fix Zero-Cross flickering on Savedata
* Fix reboot on DIMMER usage with Zero-Cross
* Fix Flickering on dimmer 0
2023-07-14 09:10:20 +02:00
Theo Arends
9638beacec
Fix possible buffer overflow
2023-07-12 12:45:02 +02:00
Theo Arends
5b6a25a7a0
Fix driver config backup and restore
...
Fix driver config backup and restore (#18295 )
2023-07-12 10:52:58 +02:00
Theo Arends
889e6ea54d
Fix driver config restore
2023-07-11 16:12:04 +02:00
Theo Arends
258976c014
Verify correct functionality
2023-07-10 18:14:23 +02:00
Theo Arends
43bc81010f
Configuration file save and restore .xdrvsetXXX
...
Configuration file save and restore now backup and restore ``.xdrvsetXXX`` files too (#18295 )
2023-07-10 16:03:32 +02:00
btsimonh
b1cc87d24f
File UI changes ( #19014 )
...
* Remove recursion into folders on Manage Files. May be enabled with UFILESYS_RECURSEFOLDERS_GUI. On Edit of a file, Save and Magane btuttons return to the folder containgint the file being edited. On delete file, UI returns to the folder that the deleted file was in.
* Make newfile put in in the current folder, and return to current folder on save of manage button.
* Add folderOnly and FileOnly functions to reduce code duplication.
Enable folder delete.
Enable folder listing to be aborted (x in browser)
Disbale ESP32 Download Task. Needs attention.
Allow folder create from newfile name.
2023-07-10 10:27:20 +02:00
Theo Arends
05d589f2d7
Set ESP32-C3 max supported ADC channels to 5
2023-07-08 18:04:13 +02:00
Theo Arends
ac4c4505a5
Bump version v13.0.0.2
...
Update changelogs
2023-07-08 17:37:12 +02:00
Theo Arends
f726c904ab
Enable ESP32 shutter driver
...
Enable ESP32 shutter driver (#18295 )
2023-07-08 17:21:06 +02:00
gemu
d9d9ca2651
fix modbus-tcp, add U32,U64 etc ( #19063 )
2023-07-07 19:50:51 +02:00
stefanbode
8ce7cb4ccd
Enhance ZC-Dimmer for falling and leading edge dimmer ( #19054 )
...
* Update tasmota_types.h
* Update xdrv_68_zerocrossDimmer.ino
2023-07-07 19:50:36 +02:00
s-hadinger
57c4825ccd
`BrRestart` now supports web handlers to work after Berry restart ( #19057 )
2023-07-06 21:37:46 +02:00
xsp1989
862edddb56
Fix BUG: Zigbee devices cannot be added through routing nodes ( #19036 )
2023-07-06 21:10:57 +02:00
s-hadinger
f56307e321
Fix to Partition_Wizard for shelly ( #19056 )
2023-07-06 20:59:50 +02:00
MIzzzzon
f462fa772d
Create GC9A01_display.ini ( #19043 )
2023-07-06 16:05:38 +02:00
s-hadinger
492759567a
Partition Wizard is now able to convert to safeboot from Shelly partition layout ( #19034 )
2023-07-05 09:55:17 +02:00
Theo Arends
522e6cf234
Implement deepsleep(0)
...
Implement deepsleep(0) as command ``restart 9`` (#19024 )
2023-07-03 21:07:45 +02:00
Theo Arends
fc9065d4c8
Fix miel_hvac
...
Fix miel_hvac (#18923 )
2023-07-03 11:55:21 +02:00
s-hadinger
d72f3b9978
Command ``BrRestart`` to restart the Berry VM (experimental) ( #19003 )
...
* Command ``BrRestart`` to restart the Berry VM (experimental)
* Add web button for Berry Restart
2023-07-02 21:52:01 +02:00
Theo Arends
85aed3a17d
Remove phase_count_virtual
2023-07-01 14:31:03 +02:00
Theo Arends
139ac367f0
Add support for energy dummy relays
...
Add support for energy dummy relays using SO48
2023-07-01 14:25:05 +02:00
Theo Arends
6dd8aabeef
Cleanup scripter logging
2023-07-01 14:04:27 +02:00
Theo Arends
3edb5bb096
Move SD card init up
...
Move SD card init up (#18934 )
2023-07-01 12:48:33 +02:00
Jacek Ziółkowski
2705374160
add Energy.phase_count_virtual to berry energy module ( #19004 )
...
* add Energy.phase_count_virtual to berry energy module
* Update xdrv_52_3_berry_energy.ino
* Update xdrv_52_3_berry_energy.ino
2023-06-30 22:19:59 +02:00
Theo Arends
ad404dfc0c
Allow disable of frequency
...
Allow disable of frequency in dummy driver
2023-06-30 11:55:48 +02:00
Theo Arends
1e3b41dd2d
Fix PCF8574 mode2 init using scripts
...
Fix PCF8574 mode2 init using scripts (#18934 )
2023-06-30 11:37:20 +02:00
Theo Arends
58e13edea0
Change loglevel message
2023-06-30 11:31:59 +02:00
Theo Arends
ca452c5e43
Add Energy->phase_count_virtual
2023-06-30 11:14:37 +02:00
Theo Arends
465ae023ab
Update change logs
2023-06-29 14:10:49 +02:00
Andrew Klaus
eb655a4a8f
Add support for SGP41 TVOC/NOx Sensor ( #18880 )
...
* Initial support for SGP41
* Removing delay() use from SGP4x driver
* Using i18n for TVOC/NOx raw values as well
2023-06-29 09:04:08 +02:00
Theo Arends
504b51a9b4
Add command ``Delay -1``
...
Add command ``Delay -1`` to wait until next second (#18984 )
2023-06-28 11:53:23 +02:00
jonschz
a51096e400
update light when `VirtualCT` is invoked ( #18972 )
...
Co-authored-by: jonschz <jonschz@users.noreply.github.com>
2023-06-27 14:23:44 +02:00
Paul Blacknell
7892a38795
add HybridControllerPhase to json payload ( #18842 )
2023-06-26 21:56:07 +02:00
p2122
6ebd447bf2
Add files via upload ( #18957 )
2023-06-26 20:22:21 +02:00
Theo Arends
0930bbddf5
Fix ESP32 Matter support
2023-06-26 12:38:29 +02:00
Theo Arends
d9a66547aa
Bump version v13.0.0.1
2023-06-26 11:12:31 +02:00
s-hadinger
339c1cedb7
Zigbee firmware for Sonoff-ZB-Pro v20230507 ( #18968 )
2023-06-25 21:24:08 +02:00
Christian Baars
99a0f2add1
MI32 legacy: Allow submitting WiFi credentials via BLE using Berry ( #18962 )
2023-06-25 14:31:04 +02:00
gemu
3642d8ef37
fixes TS_FLOAT ( #18961 )
2023-06-25 12:08:42 +02:00
Jason2866
b419ae3a92
add matter as a default option in most env ( #18942 )
2023-06-24 11:39:26 +02:00
s-hadinger
36de007909
Berry replace `string.format`with `format` ( #18945 )
...
* Berry replace `string.format`with `format`
* remove import.string
2023-06-23 18:33:31 +02:00
Norbert
04521e5542
Change format of KNX Group address ( #18928 )
...
"%d.%d.%d" -> "%d/%d/%d"
Co-authored-by: Norbert <Noschvie@users.noreply.github.com>
2023-06-22 21:56:55 +02:00
Ian Anderson
635e240293
Update Tuya_ZG-204ZL.zb ( #18922 )
...
Added in mapping for battery level on ZG-204ZL
2023-06-21 10:33:39 +02:00
Norbert Richter
1f5c1baeae
Fix NeoPool NPFiltration switch result ( #18871 ) ( #18908 )
2023-06-19 22:53:51 +02:00
Jacek Ziółkowski
5059a11b9f
Add entry for Growatt 12KTL-3S ( #18898 )
2023-06-18 20:26:42 +02:00
s-hadinger
28861821a6
Zigbee fixed regression with SetOption101 ( #18884 )
2023-06-14 22:46:18 +02:00
stefanbode
156a3551b0
Repair SHUTTER Shelly 2.5 with manual relay change on switches ( #18877 )
...
* Repair manual relay change
* Repair manual relay change
2023-06-14 16:14:10 +02:00
s-hadinger
69b2b93d61
Matter UI and logs polishing ( #18866 )
2023-06-12 19:45:18 +02:00
stefanbode
0e3b32e848
Readded up/down/open/close commands ( #18864 )
...
* Update xdrv_27_shutter.ino
* fix shutterposition with up/down/open/close
2023-06-12 19:09:19 +02:00
Subhash Chandra
2f616eef2c
make IRHVAC send incremental changes. ( #18310 )
...
This change will allow mqtt messages simpler by allowing something like
`publish cmnd/ir-bridge/IRHVAC {"Power": "On"}`.
The simpler format is required for working with mqtt clients like
iotMQTTPanel or similar on android.
Limitations:
- Requires full message be sent at-least once. I work around this with
a `system#boot` rule
- Gets messy with multiple devices. I have only one AC per room, and
this doesn't doesn't interfere with other IR devices.
TODO:
- [ ] Change the build flag `INCREMENTAL_IRAC`to a `SetOption`
- [ ] Persist `irac_prev_state` across reboots.
- [ ] Support multiple devices.
2023-06-10 14:53:02 +02:00
btsimonh
63cc575c8b
Berry Webclient: Change StreamBytes to StreamBeBytesWriter, and improve wc_getbytes ( #18837 )
...
This reduces allocation to a single allocaiton, but also theroetically allows the Bytes object to grow if content-length was unset.
(cherry picked from commit 936477f5977dd1a4f899498cc7cc0baf05b34a89)
2023-06-10 11:28:31 +02:00
Barbudor
6aed929e17
fix #18817 http response for status with retain ( #18819 )
...
* fix http response for status with retain
* take 2
* add a failsafe when JSONlen reach zero
2023-06-09 07:59:24 +00:00
btsimonh
fc92dc0995
Add wcclient.get_bytes() to Berry ( #18829 )
...
(cherry picked from commit 5903b21448a3f088b12bd47a04996ff84e467a3a)
2023-06-09 08:56:05 +02:00
blakadder
676165f3f6
better way to support LSBJ ( #18827 )
2023-06-08 20:39:02 +02:00
blakadder
ae67c6cfa1
Add support for INMP441 MEMS microphone ( #18823 )
...
* Add INMP441 MEMS mic support
* add I2S audio defines as preview
2023-06-08 16:24:44 +02:00
blakadder
5a8f13d57f
Pdm_mic ( #18807 )
...
* add I2S LSB flag
* add support for PDM microphones
2023-06-07 12:34:44 +02:00
Norbert
a19079b2ec
Fix spelling. ( #18799 )
2023-06-06 10:21:12 +02:00
blakadder
24233924c5
add I2S LSB flag ( #18793 )
2023-06-04 23:01:46 +02:00
s-hadinger
844caf51f9
Fixed HASPmota event when value is non-integer ( fixes #18229 ) ( #18791 )
2023-06-04 20:06:04 +02:00
s-hadinger
61f17221d0
Berry simplify I2S implementation ( #18778 )
2023-06-02 16:36:09 +02:00
s-hadinger
f8df9e5f00
Berry `webclient.url_encode()` is now a static class method, no change required to existing code ( #18775 )
2023-06-02 13:29:57 +02:00
Theo Arends
4e7475dbd4
Bump version v12.5.0.4
2023-06-02 10:25:02 +02:00
jonschz
9d57a19be3
Fix interaction of `SO92`, `VirtualCT`, and `RGBWWTable` ( #18768 )
...
* remove unused variable
* Relocate SO92 implementation
This way, SO92 does not ignore SO106
* Relocate RGBWWTable implementation
This fixes a bug related to RGBWWTable and SO92.
Also, the code is tidier this way
* Cleanup: Reduce code duplication
* more consistent behaviour for SO92 and free_cw
---------
Co-authored-by: jonschz <jonschz@users.noreply.github.com>
2023-06-01 22:12:57 +02:00
s-hadinger
b9d855ef79
Berry RS256 crypto algorithm (RSASSA-MCKS1_v1-5 with SHA256) used for JWT ( #18763 )
2023-06-01 10:02:23 +02:00
s-hadinger
3c75bc92a2
Zigbee Berry mapping fix attributes ( #18747 )
2023-05-29 23:05:45 +02:00
s-hadinger
3f094c9be1
Display descriptor for ST7735 128x160 display ( #18741 )
2023-05-29 18:50:03 +02:00
Theo Arends
07b7a7ee9a
Fix initial ESP32 Energy kWh total time
2023-05-29 16:19:55 +02:00
Theo Arends
bf2982854b
Fix #18737
2023-05-29 14:21:33 +02:00
s-hadinger
fe570a1b26
Matter Border Router for ESP8266 (experimental) ( #18734 )
2023-05-29 10:40:24 +02:00
Jason2866
7b55e1aca2
Make `USE_DISPLAY_MODES1TO5` in firmware `LVGL` possible ( #18729 )
...
* Make `USE_DISPLAY_MODES1TO5` in firmware `LVGL` possible
2023-05-27 17:00:14 +02:00
Theo Arends
d91e1e8bcc
Fix berry scheme select
2023-05-27 12:33:50 +02:00