* Finalized gain/integration adjustment trees
* Fixed the bugs
* works but polishing code
* need to debug pressure in bmp
* updated temp to change via setoption8 command from tasmota
* sensor table working, value reporting working, need to update dependency on sensor duality
* working
* updated file name for ms5837 xsns file
* final working with renamed for current updates (128->116)
* resolved PR comments for extra spaces, xi2c_96
* removed extra spaces, added unit for inches across languages
* added "Water depth" for languages
* removed inches as a unit from language files
* switched to centimeter units for SI consistency in Tasmota
* all variables showing in console and table; need to adjust offsets
* cm conversion properly reporting
* Sensor116 in console calibrates the sensor's pressure_offset variable
* removed pressure offset debugging lines
* removed unecessary commented items from old code
* Add files via upload
* Add files via upload
* Add files via upload
* Add files via upload
* Update en_GB.h
* Update xsns_100_ina3221.ino
* Add files via upload
* Add files via upload
I hope I have all details now changed ;-))
* Add files via upload
I still found a little detail to beutify ;-)
* Add support for pipsolar inverter
* Fix CI-Warnings
* Remove unneeded define
* Pipsolar: Fix dat result
* Add support for the rules engine
---------
Co-authored-by: Peter Rustler <peter@rustlerit.de>
* add: update DEBUG_THERMOSTAT to only control the virtual switch
Also, debug output is still generated but end user can control this debug level 3
* add: debug output of main controller parameters when thermostat enabled
Also, add units for debug outputs added to make them more intelligible
* Update xdrv_39_thermostat.ino
* add: debug message when sensor is detected as not alive
fix: display thermostat number in debug messages
* add: log message prefix string for thermostat
* Update xdrv_39_thermostat.ino
fix: typos in comments
add: debug messages
* add: debug prefix for thermostat
* add: debug prefix added to output lines
* fix: comment typos and small grammatical changes for clarity
* add: debug prefix 'THE' added to debug output
* Restart MAX17043 from the scratch
* revert change
* Changed battery capacity in charge (capacity is the Ah value of the battery, this degrades over time when battery ages)
* merge
* Changing xsns_109 to 110
* fix nr
* removed old xsns109
* Update I2CDEVICES.md
* clean-up usage of Interface
This change will allow mqtt messages simpler by allowing something like
`publish cmnd/ir-bridge/IRHVAC {"Power": "On"}`.
The simpler format is required for working with mqtt clients like
iotMQTTPanel or similar on android.
Limitations:
- Requires full message be sent at-least once. I work around this with
a `system#boot` rule
- Gets messy with multiple devices. I have only one AC per room, and
this doesn't doesn't interfere with other IR devices.
TODO:
- [ ] Change the build flag `INCREMENTAL_IRAC`to a `SetOption`
- [ ] Persist `irac_prev_state` across reboots.
- [ ] Support multiple devices.
* IR: Added support for new A/C protocol fields
New fields introduced in IRremoteESP8266 v2.8.5:
1. Command (one of: [Control | Config | iFeel | Timer], default: Control) - allows to set IR command type (e.g. iFeel for no-beep ambient sensor report)
2. iFeel (boolean, default: false) - configures whether iFeel (ambient sensor temp. is used by the A/C unit)
3. SensorTemp - the ambient sensor temperature reading to send
Note:
- Fan setting via int is now 6-value (breaking change -> 6 is the new max)
* IR A/C: Model now pretty-printed to JSON
Model string is the default (falls back to int if n/a)
* IR A/C: Added separate JSON resp. per command type
* No change for "kControlCommand" (default/legacy).
* SensorReport/Timer/Config commands only contain relevant JSON nodes
Additionally:
Clock has time semantics (input: minutes, output: HH:MM), except for "config" mode,
where state.clock is used as ConfigKey and state.sleep is used as ConfigValue.
---------
Co-authored-by: Mateusz Bronk <2566147+mbronk@users.noreply.github.com>
- ESP32 support for eigth energy phases/channels
- ESP32 command ``EnergyCols 1..8`` to change number of GUI columns
- ESP32 command ``EnergyDisplay 1..3`` to change GUI column presentation
- support for SEN5X gas and air quality sensor by Tyeth Gundry (#17736)
* functionality update see below:
- added shutterxxx0 command to change all shutters in parallel. Similar to power0 command
- added flexible ShutterMotorstop time to control the time between one relay OFF and the next ON. Now not blocking anymore other operations
- fix recent bug "shuttermode x" not working anymore
- changed autoconfig behavior to avoid SHORT CIRCUIT on missing interlock setting or wrong shuttermode
* Adding motorstop time for shutters
* Adding motorstop command for shutters
* func update
- added shutterxxx0 command to change all shutters in parallel. Similar to power0 command
- added flexible ShutterMotorstop time to control the time between one relay OFF and the next ON. Now not blocking anymore other operations
- fix recent bug "shuttermode x" not working anymore
- changed autoconfig behavior to avoid SHORT CIRCUIT on missing interlock setting or wrong shuttermode
* typo fix
* regression fix on "shutterposition stopclose"
* fix mulithread timing issue
vtHydroponics
Theo Arends
Barbudor
fb-pilot
s-hadinger
stefanbode
chefpro
Paul Blacknell
Vincent de Groot
Subhash Chandra
Mateusz Bronk
Szewcson
Stephan Hadinger