Theo Arends
14f976b8a4
Update xdrv_122_file_json_settings_demo.ino
2024-03-10 12:13:13 +01:00
Theo Arends
8231a0429c
Fix JSON Settings save
2024-03-10 12:04:57 +01:00
s-hadinger
3429ebd359
LVGL fix montserrat-10 and icons-10 ( #20901 )
2024-03-09 22:09:41 +01:00
s-hadinger
16afaf3c59
LVGL improved readability of montserrat-10 ( #20900 )
2024-03-09 21:15:30 +01:00
gemu
99f4774e14
core3 fixes ( #20895 )
2024-03-09 09:19:04 +01:00
s-hadinger
804ee37098
Haspmota optim fonts ( #20880 )
...
* LVGL optimize fonts and add icons
* changelog
2024-03-05 23:09:53 +01:00
Marcus Better
47ae5bc9c8
[tuyamcu_v2] Send updates unconditionally ( #20868 )
...
Remove the logic that inhibits the sending of updates to the MCU until
the DP's state has been observed at least once in a status report from
the MCU. This logic was intended to ensure that a DP is not updated
with its current value, which reportedly crashes some very broken
devices.
However, other devices like the Feit DIM/WIFI dimmers do not reliably
report DPs that haven't been changed. So the required status report
would never arrive, resulting in the inability to control these
devices remotely, at least until their state had been changed by a
manual button press, something that is not always practical as it
requires physical device access and needs to be done after every
restart.
Removing this logic allows Tasmota to control the device state.
2024-03-04 13:23:12 +01:00
Marcus Better
bb790efefd
[Tuya v2] Remove unused variable ( #20869 )
2024-03-04 13:22:35 +01:00
Marcus Better
ee6863ffd9
Heartbeat every 15s as documented ( #20867 )
2024-03-04 13:21:41 +01:00
s-hadinger
d4720d9378
LVGL remove embedded typicons font ( #20872 )
2024-03-04 13:04:11 +01:00
Theo Arends
24372207de
Update changelogs
...
- Elevate some messages
2024-03-04 11:58:46 +01:00
Theo Arends
9c4dfd28ef
Add command `LoRaCommand`
2024-03-03 16:55:02 +01:00
Theo Arends
d394eef7c8
Fix LoRa binary send
2024-03-01 18:07:10 +01:00
Theo Arends
715ca102c7
update changelogs
2024-03-01 16:52:28 +01:00
Theo Arends
9bb8d6e1ff
Add hard fought spaces around image name
2024-03-01 10:15:37 +01:00
Theo Arends
adfbf6508a
Remove CAD from SX127X to fix intermittent reception
2024-02-29 17:23:37 +01:00
Norbert Richter
9026b95f45
Prevent shutter MQTT broadcast with activated ShutterLock ( #20827 )
2024-02-29 13:16:33 +01:00
s-hadinger
a2bb0afea2
IR support data larger than 64 bits ( #20831 )
2024-02-28 22:42:29 +01:00
Theo Arends
24b59376bb
Fix LoRa Config
2024-02-27 17:09:50 +01:00
Theo Arends
8f1cb3431f
Fix LoRa SX1262 user GPIO selection
2024-02-26 22:25:59 +01:00
Theo Arends
d61c96a485
Add command LoRaConfig
2024-02-26 17:31:24 +01:00
s-hadinger
55be1866ad
Berry add explicit error log when memory allocation fails ( #20807 )
2024-02-25 21:17:08 +01:00
Theo Arends
389bf124bf
Update comments
2024-02-25 17:58:38 +01:00
Theo Arends
c9c1eee302
Add SX127x lora support
2024-02-25 17:03:46 +01:00
Theo Arends
b218f6bff1
Allow lora on ESP8266
2024-02-25 14:29:56 +01:00
Theo Arends
9aff378ef8
Update LoRaSend
2024-02-24 18:25:40 +01:00
stefanbode
ae01d4ccd5
Support for 3 pulse relay shutters OPEN/CLOSE/STOP ( #20758 )
...
* new option on dedicated STOP relay.
* added new stoprelay shutter
* fix
* new option stoprelay
* fix
2024-02-23 22:54:39 +01:00
Theo Arends
90b3f0f62b
Add LoRa demo using LilyGo T3S3 on 868MHz ( #17790 )
2024-02-23 18:25:13 +01:00
SteWers
5f07afab1b
[EQ3-TRV] Fix label `Valve Position` ( #20757 )
2024-02-19 11:29:14 +01:00
Theo Arends
fb003e006e
Add Show calculated heat index if temperature and humidity is available with ``#define USE_HEAT_INDEX`` ( #4771 )
2024-02-18 18:00:41 +01:00
Felipe Martínez
d77cf7d2f0
Support LWT messages when using TASMESH ( #20392 )
...
* Send LWTs when nodes come online and offline
* Use string macro
* Add a TASMESH_HEARTBEAT config
* Add flags to config file
* Fix missing break in case
* Rename heartbeat feature define
* Comment out tasmesh settings
* Detect online peers on all packets, not just heartbeats
2024-02-18 15:28:00 +01:00
stefanbode
c7894181b7
fix issue on inverted shutters with commands comming with shutterposition ( #20752 )
...
* fix INVERTED bug
fix shutterposition xxx commands do not work on inverted shutter
* fix INVERTED bug
* fix INVERTED bug
shutterposition UP/DOWN/... commands did not work as expected on inverted shutter
2024-02-18 12:36:03 +01:00
Theo Arends
1abaf146b5
Fix ESP32 PWM activity on unconfigured PWM GPIOs ( #20732 )
2024-02-17 15:19:12 +01:00
Theo Arends
0faef8e4dd
Fix PWM channels after restart ( #20732 )
2024-02-16 18:57:03 +01:00
Fulvio Spelta
c93d6676b9
Fix SetOption158 publish/suppress ModbusReceived MQTT messages ( #20733 )
...
Fixed a bug that let some mqtt messages be published anyway
2024-02-16 15:06:11 +01:00
s-hadinger
a51b08b36c
typicons font to LVGL and HASPmota ( #20742 )
2024-02-16 12:42:11 +01:00
Theo Arends
4cb53fef06
Fix ethernet config chk
2024-02-14 17:01:31 +01:00
Theo Arends
080cdb4f0d
Add core3 ethernet support on SPI for all ESP32 models
2024-02-14 16:19:51 +01:00
Theo Arends
00ea2a78d6
Revert "add json value for rules ( #20718 )"
...
This reverts commit 04cd8950a3
.
2024-02-14 09:20:56 +01:00
Theo Arends
9aa5a6d7fb
Fix compilation
2024-02-13 14:54:35 +01:00
Barbudor
04cd8950a3
add json value for rules ( #20718 )
2024-02-13 13:52:48 +01:00
Theo Arends
71ae3fb231
Prep release v13.4
2024-02-13 12:15:38 +01:00
Theo Arends
88f1e3593a
Fix GPIO Viewer
2024-02-13 10:15:12 +01:00
s-hadinger
710ed2e42c
Berry option to invert serial ( #20707 )
2024-02-11 17:27:40 +01:00
Theo Arends
523a28c39f
Fix Touch logging
2024-02-09 17:54:47 +01:00
Theo Arends
4e7e256892
Add ESP32 Core3 support for SPI ethernet on DM9051, W5500 and KSZ8851
2024-02-08 16:45:28 +01:00
Theo Arends
2f0b1e8edd
Update example code
2024-02-08 14:42:58 +01:00
Christian Baars
b02de6de6f
add BLE.info() ( #20682 )
2024-02-08 11:31:48 +01:00
Theo Arends
715914bdd0
Add internal support for persistent JSON settings using single file
2024-02-07 22:55:39 +01:00
Fulvio Spelta
ab8676d865
SetOption158 publish/suppress ModbusReceived MQTT messages ( #20678 )
2024-02-07 15:57:09 +01:00