mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
19,220 Commits 6 Branches 113 Tags 1.2 GiB
Commit Graph

88 Commits

Author SHA1 Message Date
s-hadinger 541f3630a1
Wifi provide Mac Address on Core3 (#21117) 2024-04-07 10:55:53 +02:00
s-hadinger 2128dfbade
Refactored Wifi for ESP32 to allow for Core3 (#21106) 
* Refactored Wifi for ESP32 to allow for Core3

* Fix case in include

* Grrr

* Fix compilation

* Fix Ethernet IPv6

* Fix wrong hostname due to mac address unknown at start
 2024-04-05 23:44:21 +02:00
Theo Arends ed7909f23f Removed unused `#define MQTT_DATA_STRING` support 2024-04-04 17:03:08 +02:00
Theo Arends db92a843fc Change Wifi 5 to Wifi 6 2024-04-04 14:59:32 +02:00
Theo Arends 6558414e2b Add PowerLock to status 
- Change Power format in status to bitmap
 2024-04-03 15:02:11 +02:00
Theo Arends 7c36029ec2 Add command ``Wifi 5`` to enable 11ax on ESP32 Core3 2024-04-03 14:36:52 +02:00
Theo Arends fe89774fe0 Bump version v13.4.0.4 
- Add command ``PowerLock`` to disable power control of selected outputs (#21081)
 2024-04-03 11:47:38 +02:00
Theo Arends 4b44d2fa32 Change ESP32 WiFi phy modes 11n and 11ax represented as HT20, HT40 and HE20 (#19350) 2024-03-29 13:04:44 +01:00
Marcus Better 1a462c986c
[tuyamcu_v2] Fix suppressed dimmer updates from MQTT (#20950) 
The driver tried to avoid loops when state updates from the MCU (eg
from physical button press) could be reflected back by Tasmota and
trigger another MCU command, followed by a state update. It did this
by tracking the source of the command in the last_source and
last_command_source variables, suppressing the command if either of
those was SRC_SWITCH.

However this logic is faulty: Since there are two last_source
variables to check, a command might reset one of them, but the other
would still suppress the update. As it turns out, MQTT commands would
only set last_source but not last_command_source. As a result, any
dimmer changes via MQTT would be dropped by the driver and not applied
to the MCU.

Switch functionality (on/off) was still working because those do not
rely on last_command_source, only last_source.

This change removes the loop detection logic altogether for dimmer
updates. This should be safe, because the driver already has the
latest dimmer value in its shadow state, and will not try to re-apply
a current value, thus breaking the loop.

This patch has been tested with several CE-WF500D dimmers which had
this problem.
 2024-03-14 17:42:52 +01:00
Theo Arends 080cdb4f0d Add core3 ethernet support on SPI for all ESP32 models 2024-02-14 16:19:51 +01:00
Theo Arends 10885fe60d Refactored rules ``Subscribe`` using LList allowing full message size and enabled by default 2024-01-22 16:57:59 +01:00
Theo Arends 1ffbbc914d Refactor backlog from LinkedList to TasmotaLList 2024-01-21 22:07:49 +01:00
Theo Arends 95f76d623f Changed command ``TimedPower`` refactored from String to LList 2024-01-21 14:29:44 +01:00
Theo Arends 9608b7513a Refactor backlog by removing some str copies 2024-01-20 22:45:24 +01:00
Theo Arends 05014d48cf Refactor backlog from String to char 2024-01-20 17:18:03 +01:00
Theo Arends c9d0106007 Removed max number of 30 backlog entries 2024-01-18 16:32:28 +01:00
Theo Arends 0f541a963b Fix TimedPower blink off 2024-01-18 10:38:22 +01:00
Theo Arends 2832ed914b Change command ``TimedPower`` 
Change command ``TimedPower`` from erasing all timers to showing remaining timers
 2024-01-17 15:55:25 +01:00
Theo Arends 9d00897cb4 Fix TimedPower using state names 2024-01-16 15:07:23 +01:00
Theo Arends 2c5508ee96 Add TimedPower update before end 2024-01-16 12:40:35 +01:00
Theo Arends 77d54985d0 Tune TimedPower 2024-01-16 11:02:24 +01:00
Theo Arends 789fd1e055 Add command ``TimedPower`` 
Add command ``TimedPower<index> <milliseconds>[,ON|OFF|TOGGLE|BLINK]`` executes ``Power<index> [ON|OFF|TOGGLE|BLINK] `` and after <millisecond> executes ``Power<index> [OFF|ON|TOGGLE|OFF]``
 2024-01-15 23:58:33 +01:00
Theo Arends 0ae793a8d4 Save some bytes 2023-10-21 17:37:31 +02:00
Theo Arends 57860b692d Fix GpioRead (#19810) 2023-10-21 17:20:55 +02:00
s-hadinger 356de1a16a
Add command ``GpioRead`` (#19814) 
* Add command ``GpioRead``

* change output
 2023-10-21 15:56:40 +02:00
Barbudor 335e18e8cb
Allow webbutton up to 32 (#19580) 
* Allow webbutton up to 32

* use named const
 2023-09-29 09:56:52 +02:00
Theo Arends 16aab339e7 Clean up support command code 2023-09-11 11:45:27 +02:00
Theo Arends 597c3655b0 Fix MAX17043 invalid JSON (#19495) 2023-09-11 11:35:26 +02:00
Theo Arends 0c3b559630 Phase 1 support C2/C6 2023-08-21 16:00:20 +02:00
Christian Baars b5cc48dd64
ESP32: pass flashmode at build time to macro definition (#19299) 
* pass flashmode at build time to macro definition

* fix 8266 builds
 2023-08-12 11:31:06 +02:00
Christian Baars 732e4106b8
add wifitest3 (#19259) 2023-08-04 20:17:36 +02:00
stefanbode d1a4296867
New DEEPSLEEP topic for HA + Battery Level % support (#19134) 
* New LWT on deepsleep

To allow better integration into HA LWT topic will report details of sleep status:
16:54:04.388 MQT: hm/tele/ESP_3284D1/LWT =
{"Sleep":{"Time":"2023-07-17T16:55:03","Sleep":1689612844,"Wakeup":1689612903}}

* Revert LWT back to non JSON

Send DeelSleep on LWT
Send Deepsleep parameters on topic DeepSleep

* Setting default for batteryLevel

* Enable BatteryPercentSet

Changing the battery level e.g. by rule

* Added Battery % to status message

* added battery_level_percent

* Added battery % support in STATE message

* Enable setting battery level

101 is reserved for power-plug. No battery Level reported

* Setting default for battery Level

101 is reserved for power plug
0..100 normal battery values

* Revert back LWT to Offline

Removed "DeepSleep" LWT status until further decision is made. Current implementation is technical sufficient for HA to detect a battery powered device

* Added discovery message after deepsleep change

* Added discovery for battery and deepsleep
 2023-07-20 09:51:08 +02:00
Theo Arends 522e6cf234 Implement deepsleep(0) 
Implement deepsleep(0) as command ``restart 9`` (#19024)
 2023-07-03 21:07:45 +02:00
Theo Arends 504b51a9b4 Add command ``Delay -1`` 
Add command ``Delay -1`` to wait until next second (#18984)
 2023-06-28 11:53:23 +02:00
Theo Arends e05d75248e Add undocumented feature 2023-05-25 17:13:31 +02:00
Theo Arends f5d6578fb5 Fix correct JSON display of WifiPower float 2023-05-19 17:41:18 +02:00
Theo Arends 57f85ae478 Optimize dynamic WiFi power 2023-05-17 10:45:00 +02:00
Theo Arends 0385204ca7 Add command ``WifiPower 0`` 
Add command ``WifiPower 0`` to enable dynamic wifi power based on RSSI by @TD-er (#15443)
 2023-05-16 18:55:55 +02:00
Theo Arends 9b8f3b6b4c Add command I2CScan0 
Add command I2CScan0 to scan both busses if available
 2023-05-14 15:21:19 +02:00
Theo Arends e9d1e8c725 Change command FileUpload binary index 2023-05-06 18:09:11 +02:00
Theo Arends 6f6c43a724 Add command ``SetOption152 0/1`` 
Add command ``SetOption152 0/1`` to select two (default) or one pin bistable relay control (#18386)
 2023-04-18 17:16:29 +02:00
Theo Arends 545c6a3511 Refactor saving some bytes 2023-04-07 13:03:20 +02:00
Theo Arends 4f983105f3 Allow compound commands in json command 
Allow compound commands in json command (#18358)
 2023-04-07 12:36:02 +02:00
Theo Arends d9353cf1e3 Fix upload connection error 2023-04-03 14:17:08 +02:00
stefanbode 5c14a3169b
Shutter esp32 support up to 16 shutters (#18295) 
* Updates to support ESP32 shutter compiler option

* New ESP32 shutter driver

* Update xdrv_27_ESP32_shutter.ino

* Update xdrv_27_shutter.ino

* Update support_command.ino

* Update xdrv_27_shutter.ino

Fix compile error

* Update xdrv_27_ESP32_shutter.ino

Fix compile error

* Update xdrv_27_shutter.ino

Fix compile error

---------

Co-authored-by: Theo Arends <11044339+arendst@users.noreply.github.com>
 2023-03-29 15:43:19 +02:00
Theo Arends 9ae7b86efc Save some bytes 2023-03-25 11:59:42 +01:00
Theo Arends b32a093c0c Fix multidigit SwitchModes display 
Fix multidigit SwitchModes display
 2023-03-25 11:36:10 +01:00
Theo Arends 5bb624ad09 Add command ``SwitchMode0`` 
Add command ``SwitchMode0`` to show or set all SwitchModes
 2023-03-25 11:29:49 +01:00
Barbudor 635afa36de
i2cdriverstate in status only when use_i2c (#18067) 2023-02-27 15:39:52 +01:00
Theo Arends a97f0349d8 Add I2CDriver output to status 4 2023-02-27 09:28:28 +01:00