db44b058e2
Add command Reset 99 to reset bootcount to zero
...
Add command Reset 99 to reset bootcount to zero (#684 , #6351 )
2019-09-05 12:32:28 +02:00
282591a0b2
Bump version to 6.6.0.10
...
Redesign Tuya support by Shantur Rathore (#6353 )
2019-09-05 10:41:08 +02:00
af1edb0cdb
Add command Time 1/2/3 to select JSON time format ISO + Epoch, ISO or Epoch
...
* Add time to more events (#6337 )
* Add command Time 1/2/3 to select JSON time format ISO + Epoch, ISO or Epoch
2019-09-04 18:06:34 +02:00
34eed717fa
Add command Power0 0/1/2/Off/On/Toggle to control all power outputs at once
...
Add command Power0 0/1/2/Off/On/Toggle to control all power outputs at once (#6340 )
2019-09-03 23:04:49 +02:00
f4b5e565ef
Add driver USE_SDM120_2 with Domoticz P1 Smart Meter functionality as future replacement for USE_SDM120 - Pls test and report
...
Add driver USE_SDM120_2 with Domoticz P1 Smart Meter functionality as future replacement for USE_SDM120 - Pls test and report (#6282 )
2019-09-01 17:51:25 +02:00
23c3419509
Add Zigbee support phase 2 - cc2530 initialization and basic ZCL decoding
2019-08-31 21:23:32 +02:00
2d673d78ef
Add 'sonoff-ir' pre-packaged IR-dedicated firmware and 'sonoff-ircustom' to customize firmware with IR Full protocol support
2019-08-30 20:41:01 +02:00
b363bb55a9
Add compile time define USE_WS2812_HARDWARE to select hardware type WS2812, WS2812X, WS2813, SK6812, LC8812 or APA106 (DMA mode only)
...
Add compile time define USE_WS2812_HARDWARE to select hardware type WS2812, WS2812X, WS2813, SK6812, LC8812 or APA106 (DMA mode only)
2019-08-30 14:35:08 +02:00
ab5af7bf47
Add Full support of all protocols in IRremoteESP8266, to be used on dedicated-IR Tasmota version. Warning: +81k Flash when compiling with USE_IR_REMOTE_FULL
2019-08-28 22:01:01 +02:00
9af67a5278
Bump version to 6.6.0.9
...
Change theoretical baudrate range to 300..19660500 bps in 300 increments (#6294 )
2019-08-28 12:02:27 +02:00
f31b903fab
Bump version to 6.6.0.8
...
* Add Tuya Energy monitoring by Shantur Rathore
* Add phase 1 Domoticz P1 Smart Meter support using energy sensors handled by xdrv_03_energy.ino based on an idea by pablozg
* Add commands Tariff1 0..23 (start Off-Peak hour), Tariff2 0..23 (start Standard hour) and Tariff3 0/1 (Saturday and Sunday Off-Peak)
2019-08-27 17:01:12 +02:00
6c905b65a4
Expand Settings area to 4k for future use
...
Expand Settings area to 4k for future use
2019-08-25 14:58:45 +02:00
dc76792b5f
Bump version to 6.6.0.7
...
Bump version to 6.6.0.7
2019-08-25 12:41:00 +02:00
28eb6d7661
Integrate ibeacon
2019-08-25 12:29:48 +02:00
5f6a87c7c0
Update libraries and fix SSD1306 power control
...
Update libraries and fix SSD1306 power control
2019-08-19 18:17:44 +02:00
42c8ac61e8
Bump version to 6.6.0.6
...
Bump version to 6.6.0.6
2019-08-19 17:09:31 +02:00
33aa430f64
Add support for RDM6300 125kHz RFID Reader by Gerhard Mutz
...
Add support for RDM6300 125kHz RFID Reader by Gerhard Mutz
2019-08-19 11:47:59 +02:00
bd97621363
Update _changelog.ino for #6191
2019-08-16 18:35:16 +02:00
9746489380
Bump version to 6.6.0.5
...
* Add command WebSensor<sensor number> 0/1 to control display of sensor data in web GUI (#6085 )
* Change some table locations from RAM to Flash
2019-08-16 16:12:33 +02:00
a85588aa3d
Add support for PAJ7620 gesture sensor by Christian Baars
...
Add support for PAJ7620 gesture sensor by Christian Baars
2019-08-15 11:34:35 +02:00
23ec00a452
Add command Buzzer
...
Add command Buzzer with optional parameters <number of beeps>,<duration of beep in 100mS steps>,<duration of silence in 100mS steps> enabled when a buzzer is configured (#5988 )
2019-08-12 17:18:08 +02:00
c9139514d0
Add ZigBee support phase 1 - low level MQTT ZNP messages for CC2530 devices
2019-08-09 22:52:33 +02:00
e0f08ec764
Add support for Solax X1 inverter by Pablo Zerón
...
Add support for Solax X1 inverter by Pablo Zerón
2019-08-09 16:42:16 +02:00
62a516c3f2
Add some debug info
...
Add some debug info
2019-08-08 18:14:36 +02:00
7336b2807f
Add debug compile features using defines DEBUG_TASMOTA_DRIVER and DEBUG_TASMOTA_SENSOR. See example in xdrv_09_timers.ino
...
Add debug compile features using defines DEBUG_TASMOTA_DRIVER and DEBUG_TASMOTA_SENSOR. See example in xdrv_09_timers.ino (#6186 )
2019-08-08 15:17:39 +02:00
afb39aa680
Add support for CHIRP soil moisture sensor by Christian Baars
...
Add support for CHIRP soil moisture sensor by Christian Baars
2019-08-07 12:08:13 +02:00
ed5f368d65
Version 6.6.0.4
2019-08-06 19:57:46 +02:00
81ca44dba2
Add SetOption68 to enable multi-channel PWM instead of a single light ( #6134 )
2019-08-06 10:57:50 +02:00
a50a6eff61
Change Store AWS IoT Private Key and Certificate in SPI Flash avoiding device-specific compilations
2019-08-04 19:42:21 +02:00
c10b236831
Add allow repeat/longpress for IRSend raw, introduced IRSend<r> option ( #6074 )
2019-08-04 12:37:01 +02:00
714f938c05
Refactor energy commands
...
* Refactor energy commands
* Add define USE_ENERGY_MARGIN_DETECTION to disable Energy Margin and Power Limit detection
* Add define USE_ENERGY_POWER_LIMIT to disable Energy Power Limit detection while Energy Margin detection is active
2019-08-01 15:46:12 +02:00
c93a03f1d0
Add MqttCount metric to STATE ( #6155 )
2019-07-31 19:34:23 +02:00
781cf69933
Add disable option to Width
...
Add option 0 to Width1 (Marker), Width2 (Second), Width3 (Minute) and Width4 (Hour) disabling display (#6152 )
2019-07-31 16:59:12 +02:00
372aecd353
Upgrade library IRRemoteEsp8266 to 2.6.4, now using sendPioneer()
2019-07-29 09:28:40 +02:00
250c991c97
6.6.0.3 - Change filename of configuration backup from using FriendlyName1 to Hostname solving diacritic issues
...
Change filename of configuration backup from using FriendlyName1 to Hostname solving diacritic issues (#2422 )
2019-07-25 14:18:28 +02:00
996c01858c
Update _changelog.ino
...
Change commands Var and Mem to show all parameters when no index is given (#6107 )
2019-07-24 11:12:49 +02:00
546653a8f2
Add display features
...
* Add command DisplayWidth to set pixel width on supported devices
* Add command DisplayHeight to set pixel height on supported devices
* Add Oled reset GPIO option "OLED reset"
2019-07-23 14:05:42 +02:00
af4dd080c5
Fix possible IRSend input corruption
...
Fix possible IRSend input corruption
2019-07-23 10:22:14 +02:00
6ec634c695
Fix send IRSend for Pioneer devices ( #6100 )
2019-07-22 19:27:03 +02:00
ce13c0cf8f
Add support for optional IRHVAC Midea/Komeco protocol
...
Add support for optional IRHVAC Midea/Komeco protocol (#3227 )
2019-07-21 18:06:13 +02:00
0df4a888d5
Support IRSend long press ('repeat' feature from IRRemoteESP8266) ( #6074 )
2019-07-15 09:22:07 +02:00
49022d0320
6.6.0.2 Add support for Sonoff iFan03 as module 71
...
Add support for Sonoff iFan03 as module 71 (#5988 )
2019-07-14 15:23:02 +02:00
6f02bad381
Xiaomi Philips brightness ( #6091 )
2019-07-14 14:10:38 +02:00
791e33f81a
Fix WeMo emulation for 1G echo and 2G echo dot ( #6086 )
2019-07-13 16:31:53 +02:00
0bb0f06982
Update _changelog.ino
2019-07-12 13:42:48 +02:00
8a98437761
Merge pull request #6076 from thirug010/development
...
Updated Code for Issue #6066- Dimmer Value not equal to Rx Dim State
2019-07-12 12:21:02 +02:00
3d52619593
Update _changelog.ino
2019-07-12 12:18:25 +02:00
51740acd8b
Fix Force Elliptic Curve for Letsencrypt TLS #6042
2019-07-12 08:11:40 +02:00
943dc524ea
Update Code for Issue #6066- Dimmer Value not equal to Rx Dim State #
...
Change Summary
1. Added Option to select Dimmer Range (1-100 and 1-255) through SetOption66 (default is 1-100 for legacy device support
2. Updated Dimmer code to set range based on the option66 100 / 225
2019-07-11 22:28:08 -05:00
c3d2937f22
Add command Time to disable NTP and set UTC time as Epoch value if above 1451602800 (=20160101). Time 0 re-enables NTP
...
Add command Time to disable NTP and set UTC time as Epoch value if above 1451602800 (=20160101). Time 0 re-enables NTP (#5279 )
2019-07-11 14:59:28 +02:00
64521b42b6
Add Epoch and UptimeSec to JSON messages
...
Add Epoch and UptimeSec to JSON messages (#6068 )
2019-07-11 14:09:42 +02:00
0243e2be7e
Add command SetOption42 0..255 to set over temperature in Celsius. Defaults to 90
...
Add command SetOption42 0..255 to set over temperature in Celsius. Defaults to 90 (#6036 )
2019-07-08 14:16:33 +02:00
eaf5dbd36c
Add blend RGB leds with White leds for better whites #5895 #5704
2019-07-07 10:15:50 +02:00
c3584cc8ed
Bump version to v6.6.0
...
Bump version to v6.6.0
2019-07-06 15:15:29 +02:00
cc60bf0f03
Fix Not restoring white value on power off/power on ( #5993 )
2019-07-02 22:10:57 +02:00
cc46e2e625
Add support for Sonoff L1 thanks to reef-actor
...
Add support for Sonoff L1 thanks to reef-actor (#6002 )
2019-07-02 10:54:30 +02:00
15e37ef0bb
Change converted double to float in rules, and replaced trigonometric functions from stdlib with smaller versions.
2019-07-01 18:20:43 +02:00
46210bc9f0
Add command SetOption40 0..250
...
Add command SetOption40 0..250 to disable button functionality if activated for over 0.1 second. Needs SetOption1 1 and SetOption13 0 (#5449 )
2019-06-19 12:37:35 +02:00
4413a757d8
TLS+AWS IoT optimization for speed, code and memory footprint
2019-06-19 09:49:48 +02:00
5f3be7ca87
Add define USE_DHT to my_user_config.h to save space in sonoff-basic.bin
...
Add define USE_DHT to my_user_config.h to save space in sonoff-basic.bin
2019-06-16 17:03:41 +02:00
12da2fd6f9
Add define USE_COUNTER to my_user_config.h to save space in sonoff-basic.bin and sonoff-minimal.bin
...
Add define USE_COUNTER to my_user_config.h to save space in sonoff-basic.bin and sonoff-minimal.bin
2019-06-16 16:43:23 +02:00
66d372586a
Fix channel command for dual dimmers ( #5940 )
2019-06-12 22:49:22 +02:00
8ed16c15a0
dd using heap when more than 199 IRSend values need to be send. May need increase of define MQTT_MAX_PACKET_SIZE too
...
dd using heap when more than 199 IRSend values need to be send. May need increase of define MQTT_MAX_PACKET_SIZE too (#5950 )
2019-06-12 19:11:21 +02:00
2b5c691041
6.5.0.16 Refactor TLS and Add visibility toggle to GUI password
...
6.5.0.16 20190611
* Refactored TLS based on BearSSL, warning breaking change for fingerprints validation (see doc)
* Add checkbox to GUI password field enabling visibility during password entry only (#5934 )
2019-06-11 14:30:07 +02:00
006462f17e
Refactored TLS based on BearSSL - cleaned
2019-06-10 12:06:03 +02:00
09dcb93489
Fix Toggle functionality to button double press when one button and two devices are detected
...
Fix Toggle functionality to button double press when one button and two devices are detected (#5935 )
2019-06-09 17:54:13 +02:00
d3eaf7491d
Fix exception 9 when syslog is enabled and NTP is just synced
...
Fix exception 9 when syslog is enabled and NTP is just synced (#5917 )
2019-06-09 13:34:14 +02:00
e7a3a5033c
Update _changelog.ino
2019-06-08 22:28:35 +02:00
53ecde7637
Add command SetOption65 0/1 and more Tuya Serial based device support
...
Add command SetOption65 0/1 and more Tuya Serial based device support (#5815 )
2019-06-08 11:38:45 +02:00
a7dc6b71ae
Add some MQTT housekeeping which might solve issue ( #5755 )
...
Add some MQTT housekeeping which might solve issue (#5755 )
2019-06-07 18:03:34 +02:00
6a5ea7a9c6
Add support for AWS IoT with TLS 1.2 on core 2.5.2
...
Add support for AWS IoT with TLS 1.2 on core 2.5.2
2019-06-06 14:40:59 +02:00
24dda8e8fe
Updated with latest changes and resoved conflits
2019-06-06 13:44:33 +02:00
073fd5c2cd
6.5.0.15 Change pubsubclient MQTT_KEEPALIVE from 10 to 30 seconds
...
6.5.0.15 20190606
* Change pubsubclient MQTT_KEEPALIVE from 10 to 30 seconds in preparation of AWS IoT support
2019-06-06 12:14:04 +02:00
5c648e8048
Added AWS IoT to changelog
2019-06-05 22:39:11 +02:00
345a514f7b
dd Toggle functionality to button double press when more devices are detected
...
dd Toggle functionality to button double press when more devices are detected
2019-06-05 15:26:42 +02:00
164b3aaf11
Add command SetOption39 1..255 to control CSE7766 (Pow R2) or HLW8032 (Blitzwolf SHP5) handling of power loads below 6W
...
Add command SetOption39 1..255 to control CSE7766 (Pow R2) or HLW8032 (Blitzwolf SHP5) handling of power loads below 6W. Default setting is 128 (#5756 )
2019-06-04 17:30:03 +02:00
d0502c1af8
Fix PZem startup issue
...
Fix PZem startup issue (#5875 )
2019-06-02 18:07:54 +02:00
ffd36e0b2d
6.5.0.14 Webserver HTML/Javascript changes
...
6.5.0.14 20190602
* Change webserver HTML input, button, textarea, and select name based on id
* Fix webserver multiple Javascript window.onload functionality
2019-06-02 16:44:02 +02:00
1b229f5c9b
Work-around for Philips Hue emulation issue by using part of MAC address for LightId
...
Work-around for Philips Hue emulation issue by using part of MAC address for LightId (#5849 )
2019-05-31 11:28:47 +02:00
712ea8ec43
Add support to Stage Arduino Core
2019-05-30 18:32:07 -03:00
ad11828e9d
Work-around for Philips Hue emulation issue ( #5849 )
2019-05-30 21:47:19 +02:00
4e95417db4
Add reset of Energy values when connection to sensor is lost for over 4 seconds
...
Add reset of Energy values when connection to sensor is lost for over 4 seconds (#5874 , #5881 )
2019-05-30 12:45:02 +02:00
74685f1202
Fix #5869 typo
2019-05-29 19:26:42 +02:00
86d14fe24c
Fix #5869
2019-05-29 19:24:47 +02:00
22663fc10c
6.5.0.13 Add command SetOption38 6..255
...
6.5.0.13 20190527
* Add command SetOption38 6..255 to set IRReceive protocol detection sensitivity mimizing UNKNOWN protocols (#5853 )
2019-05-27 11:56:14 +02:00
4d070bfb15
Change default PowerDelta from 80% to 0% on new installations
...
Change default PowerDelta from 80% to 0% on new installations (#5858 , #5028 , #4813 , #4130 , #4145 , #3795 , #3778 , #3660 , #3648 )
2019-05-24 15:04:48 +02:00
56615dce4e
Add command AdcParam
...
Add command AdcParam to control ADC0 Temperature and Light formula parameters
2019-05-24 12:28:09 +02:00
dc1bf2ff03
Add support for VL53L0x time of flight sensor. Might interfere with TSL2561 using same I2C address ( #5845 )
...
Add support for VL53L0x time of flight sensor. Might interfere with TSL2561 using same I2C address (#5845 )
2019-05-22 13:39:26 +02:00
15098dae68
Fix core 2.5.x ISR not in IRAM exception ( #5837 )
...
Fix core 2.5.x ISR not in IRAM exception (#5837 )
2019-05-22 10:39:37 +02:00
763118b626
6.5.0.12 Add support for link LED and four power LEDs
...
6.5.0.12 20190521
* Add AriLux RF control GPIO option "ALux IrSel" (159) replacing "Led4i" (59) for full LED control (#5709 )
* Add LED GPIO option "LedLink" (157) and "LedLinki" (158) to select dedicated link status LED (#5709 )
* Add support for up to four LEDs related to four power outputs. Enabled when "LedLink(i)" is configured too (#5709 )
* Add extended LED power control using command LedPowerX where X is 1 to 4. Enabled when "LedLink(i)" is configured too (#5709 )
2019-05-21 18:11:39 +02:00
7204f85a3a
Add support for SPS30 Particle sensor thanks to Gerhard Mutz ( #5830 )
...
Add support for SPS30 Particle sensor thanks to Gerhard Mutz (#5830 )
2019-05-21 10:39:54 +02:00
d599f21758
Add defines USE_EMULATION_WEMO and USE_EMULATION_HUE
...
* Remove define USE_EMULATION from my_user_config.h (#5826 )
* Add defines USE_EMULATION_WEMO and USE_EMULATION_HUE to my_user_config.h to control emulation features at compile time (#5826 )
2019-05-20 15:09:42 +02:00
9c0bd2a665
Add HX711 weight restore after controlled restart or after power restore just before executing command Sensor34 7 ( #5367 , #5786 )
...
Add HX711 weight restore after controlled restart or after power restore just before executing command Sensor34 7 (#5367 , #5786 )
2019-05-19 17:49:00 +02:00
8c132bd0ff
Add rule System#Save executed just before a planned restart
...
Add rule System#Save executed just before a planned restart
2019-05-19 12:42:10 +02:00
dc3d0aea94
Add initial support for Scripts
...
Add initial support for Scripts as replacement for Rules. Default disabled but can be enabled in my_user_config.h (#5689 )
2019-05-18 13:34:52 +02:00
a777bb6cdf
6.5.0.11 Add command SetOption64 0/1 to switch between "-" or "_" as sensor index separator
...
6.5.0.11 20190517
* Add command SetOption64 0/1 to switch between "-" or "_" as sensor index separator impacting DS18X20, DHT, BMP and SHT3X sensor names (#5689 )
2019-05-17 14:23:21 +02:00
6177787744
Revert "6.5.0.11 Change sensor names using a minus"
...
This reverts commit 61c59fa4b9
2019-05-17 14:06:36 +02:00
61c59fa4b9
6.5.0.11 Change sensor names using a minus
...
6.5.0.11 20190517
* Add user define INDEX_SEPARATOR to control Sensor Name index character which was fixed to "-" (minus) but is now changed to "_" (underscore) for future support.
* This change impacts DS18X20, DHT, BMP and SHT3X sensor names.
2019-05-17 12:07:37 +02:00
038079a865
Add rule support for single JSON value pair
...
Add rule support for single JSON value pair like {"SSerialReceived":"on"} by expanding it to {"SSerialReceived":{"Data":"on"}} allowing for trigger SSerialReceived#Data=on (#5638 )
2019-05-15 16:31:13 +02:00
e472d3232a
Add device OverTemp (>73 Celsius) detection to selected Energy Monitoring devices
...
* Fix Sonoff Pow R2 / S31 invalid energy increments (#5789 )
* Add device OverTemp (>73 Celsius) detection to any Energy Monitoring device with temperature sensor powering off all outputs
2019-05-14 17:46:40 +02:00
Theo Arends
Stephan Hadinger
thirug010
Andre Thomas
Adrian Scillato