15e37ef0bb
Change converted double to float in rules, and replaced trigonometric functions from stdlib with smaller versions.
2019-07-01 18:20:43 +02:00
1b69502d9b
Code optimization - Change for(uint8_t in for (uint32_t
...
Code optimization - Change for(uint8_t in for (uint32_t
2019-06-30 16:44:36 +02:00
30adce5648
Revert "Code optimization - Change for(uint8_t in for (uint32_t"
...
This reverts commit 5e1eac3f74
2019-06-30 15:56:55 +02:00
5e1eac3f74
Code optimization - Change for(uint8_t in for (uint32_t
...
Code optimization - Change for(uint8_t in for (uint32_t
2019-06-30 15:47:32 +02:00
164b3aaf11
Add command SetOption39 1..255 to control CSE7766 (Pow R2) or HLW8032 (Blitzwolf SHP5) handling of power loads below 6W
...
Add command SetOption39 1..255 to control CSE7766 (Pow R2) or HLW8032 (Blitzwolf SHP5) handling of power loads below 6W. Default setting is 128 (#5756 )
2019-06-04 17:30:03 +02:00
4e95417db4
Add reset of Energy values when connection to sensor is lost for over 4 seconds
...
Add reset of Energy values when connection to sensor is lost for over 4 seconds (#5874 , #5881 )
2019-05-30 12:45:02 +02:00
0e518084d7
Fix CSE7766 Sensor invalid energy load steps prevention
...
fixes PR #5793 solution which can async (load overflow) forever until device restart
2019-05-20 08:52:05 +02:00
9ed9ac6621
CSE7766 Sensor (Sonoff S31/Pow R2) prevent invalid energy load steps
...
prevent invalid load delta steps even checksum of datastream from CSE is valid (issue #5789 )
2019-05-14 12:13:42 +02:00
5e810f1ff3
Add Shelly 2.5 overtemp functionality
...
* Add all temperature, humidity and pressure for global access
* Add Shelly 2.5 overtemp functionality
* Fix Shelly 2.5 I2C address priority issue when VEML6070 code is present by disabling VEML6070 for Shelly 2.5 (#5592 )
2019-04-15 18:12:42 +02:00
f33c59249e
Fix calibration calculation
...
Fix calibration calculation (#5246 )
2019-02-17 15:30:15 +01:00
16ec25bdff
Prep for user config
...
Prep CSE7766 (S31 and PowR2) and MCP39F501 (Shelly2) for user configuration
2019-02-04 14:57:20 +01:00
304ac6fe44
6.4.1.12 code changes (byte/boolean)
...
6.4.1.12 20190128
* Change code use of boolean to bool and byte to uint8_t
* Change code uint8_t flags to bool flags
2019-01-28 14:08:33 +01:00
447ec6256e
6.4.1.4 Update Copyright (C) 2019
...
6.4.1.4 20190101
* Update Copyright (C) 2019
2019-01-01 13:55:01 +01:00
0b10f48e41
6.4.1.1 Fix most compiler warnings
...
6.4.1.1 20181224
* Fix most compiler warnings
2018-12-24 18:14:25 +01:00
4a7e7b0dbb
Change C functions with () to (void)
2018-11-14 15:32:09 +02:00
4b7c797fb7
6.2.1.9 Apparent/Reactive Power
...
6.2.1.9 20180928
* Add Apparent Power and Reactive Power to Energy Monitoring devices (#251 )
2018-09-28 15:48:42 +02:00
665a4abc47
Fix Pow R2 and S31 low power
...
* Add power value below 5W to Sonoff Pow R2 and S31 (#3745 )
* Add force_update to Home Assistant discovery (#3873 )
2018-09-22 16:09:13 +02:00
7a767f104c
6.2.1.6 Remove some commands
...
6.2.1.6 20180922
* Removed commands PowerCal, VoltageCal and CurrentCal as more functionality is provided by commands PowerSet, VoltageSet and CurrentSet
* Allow decimals as input to commands PowerSet, VoltageSet and CurrentSet
* Add support for PCA9685 12bit 16pin hardware PWM driver (#3866 )
2018-09-22 15:09:53 +02:00
f517755303
Prep for frequency display
...
Prep for energy frequency display and update xnrg_05_pzem2.ino with correct register values
2018-09-07 18:15:47 +02:00
07dafe1631
6.2.0.2 - Energy monitoring
...
6.2.0.2 20180904
* Rewrite energy monitoring using energy sensor driver modules
* Fix lost today and total energy value after power cycle (#3689 )
2018-09-04 16:22:34 +02:00
Stephan Hadinger
Theo Arends
Norbert Richter
andrethomas