Commit Graph

80 Commits

Author SHA1 Message Date
Ajith Vasudevan 27288ac603 Added support for MAX7219 Seven-Segment Display 2021-03-19 15:56:48 +05:30
Theo Arends 4d3fda5a74 Add support for NEC and OPTOMA LCD/DLP Projector serial power control
Add support for NEC and OPTOMA LCD/DLP Projector serial power control by Jan Bubík (#11145)
2021-02-28 12:37:02 +01:00
Jan Bubík c6673d4081 new feature: LCD/DLP Projector Serial Control
- implemented as XDRV53
 - user must configure GPIO pins "DLP Rx" and "DLP Tx" for serial communication
 - emulates an additional RELAY by sending ON/OFF commands to Projector
 - continually polls the Projector's state to update virtual RELAY state
 - blocks RELAY1 in ON state while Projector is running (to protect the lamp)
 - serial codes for NEC and OPTOMA, ready for more manufacturers
 - tested with NEC V300W
2021-02-27 22:28:29 +01:00
Theo Arends 14206e46a1 Add support for TM1637 seven segment display by Ajith Vasudevan (#10889) 2021-02-17 12:32:36 +01:00
Ajith Vasudevan bc57e68b7e Merged latest changes to TM1637 code 2021-02-14 16:52:08 +05:30
Ajith Vasudevan d2d7a408c8 Rewrote TM1637 driver as a Display Driver 2021-02-10 21:53:47 +05:30
Ajith Vasudevan 977fe740e6 Added support for TM1637 Seven-Segment Display 2021-02-09 13:16:16 +05:30
Simon Hailes 79bf2f6aa3 belt and braces fix test failure 2021-01-26 20:02:42 +00:00
Simon Hailes c72bf5aa09 Make USE_BLE_ESP32 the default for sensors. 2021-01-26 19:12:11 +00:00
Theo Arends c934a20b4f Add support for TOF10120
Add support for TOF10120 time of flight sensor by Cyril Pawelko (#10190)
2021-01-22 16:48:41 +01:00
Theo Arends fb2c10cb97 Add SPI display driver SSD1331 Color oled
Add SPI display driver SSD1331 Color oled by Jeroen Vermeulen (#10376)
2021-01-04 14:26:27 +01:00
Stephan Hadinger d0b426b505 Disable `USE_LIGHT`` light support for ZBBridge (saves 17.6kb) 2021-01-02 19:26:24 +01:00
Theo Arends ee1648d3e0 Prep SSD1331 driver 2021-01-01 16:05:06 +01:00
Theo Arends 54c1a2d029 Add support for SPI display driver for ST7789 TFT
Add support for SPI display driver for ST7789 TFT by Gerhard Mutz (#9037)
2021-01-01 15:05:58 +01:00
Theo Arends dcbb3f1e0e Happy New Year 2021-01-01 13:44:04 +01:00
Stephan Hadinger 488712c3f0 Commands `CTRange` and `VirtualCT` 2020-12-29 19:31:27 +01:00
Theo Arends 83b3aa576d Add BSSID and Signal Strength Indicator to GUI wifi scan result (#10253)
Add BSSID and Signal Strength Indicator to GUI wifi scan result (#10253)
2020-12-27 16:25:34 +01:00
Theo Arends 0a7d441e65 Add support for P9813 RGB Led MOSFET controller
Add support for P9813 RGB Led MOSFET controller (#10104)
2020-12-17 16:33:26 +01:00
Theo Arends 37a1fb0834 Add zigbee specific define 2020-12-01 12:18:32 +01:00
Theo Arends 5892cffbda Prep RC522 rfid reader pt2 2020-11-30 17:54:40 +01:00
Jason2866 b641216198 minicustom 2020-11-26 09:49:24 +01:00
Theo Arends 92f067af59 Change Shelly Dimmer fw upgrade
Change Shelly Dimmer fw upgrade using WebGUI Firmware Upgrade and file from folder `tools/fw_shd_stm32/`
2020-11-17 12:25:48 +01:00
Theo Arends c02770ce96 Add support for Shelly Dimmer 1 and 2
Add support for Shelly Dimmer 1 and 2 by James Turton (#9854)
2020-11-14 16:43:32 +01:00
Jason2866 63d09dcfdd
No MI_ESP32 2020-11-13 20:18:20 +01:00
Jason2866 092139e4c4
MI_ESP32 enabled
in sensors build. BT is enabled in ESP8266 as default too.
2020-11-13 19:01:13 +01:00
Theo Arends 4b6465fd10 Add support for fingerprint sensor
Add support for AS608 optical and R503 capacitive fingerprint sensor
2020-11-11 17:31:48 +01:00
Christopher Tremblay 959e734924 Add support for EZO PMP
Adds support for EZO Peristaltic pump
2020-11-07 01:41:22 -08:00
Christopher Tremblay 7224b414fa Add support for EZO RGB
Adds support for EZO RGB sensor
2020-11-03 03:38:28 -08:00
Christopher Tremblay 2af5f61b03 Add support for EZO DO
Add support for EZO Disolved Oxygen sensor
2020-11-02 00:26:35 -08:00
Christopher Tremblay 558034b15f Add support for EZO FLO sensor
Add support for EZO FLO sensor
2020-11-01 01:28:43 -08:00
Jason2866 80807614d8
Make TLS for zbbridge optional 2020-10-30 09:58:32 +01:00
Christopher Tremblay 4a8bc0841e Add support for EZO PRS
Adds support for EZO PRS sensors
2020-10-29 02:34:44 -07:00
Christopher Tremblay db338f1d81 Add support for EZO O2
Adds support for EZO O2 sensor
2020-10-27 03:38:54 -07:00
Christopher Tremblay a80944d9a2 Cleanup the EZO devices
Fixed a few mistakes in the comments and organized the code to make it easier to read & extend.
2020-10-26 00:09:44 -07:00
Theo Arends a96218fc1c v9.0.0.3
- Add TLS in binary tasmota-zbbridge (#9620)
- Add support for EZO CO2 sensors by Christopher Tremblay (#9619)
2020-10-25 14:46:13 +01:00
Theo Arends 37e68db05a
Merge pull request #9619 from tichris0/development
Add support for EZO CO2 sensor
2020-10-25 14:19:51 +01:00
Stephan Hadinger 951783cd54 Enable TLS in Tasmota-zbbridge 2020-10-25 11:48:38 +01:00
Christopher Tremblay ab7481d115 Fix error in tasmota_configuration
Fix compile error in my build
2020-10-25 01:28:27 -07:00
Christopher Tremblay 6ec207fd3e Merge branch 'development' of https://github.com/arendst/Tasmota into development 2020-10-25 01:21:48 -07:00
Christopher Tremblay 9f91ca8d4f Add support for EZO CO2 sensor
Adds support for CO2 sensor
2020-10-25 01:21:01 -07:00
Theo Arends 0945f3c522
Merge pull request #9615 from s-hadinger/zbbridge_disable_wemo
Disable Wemo emulation for ZBBridge
2020-10-25 08:31:59 +01:00
Stephan Hadinger c305b07cda Disable Wemo emulation for ZBBridge
Saves 3KB of Flash
2020-10-24 19:19:29 +02:00
Theo Arends 582c32f5b9 Add support for EZO EC sensor
Add support for EZO EC sensors by Christopher Tremblay (#9613)
2020-10-24 12:41:08 +02:00
Theo Arends 1021cf3ca5 Update changelog and releasenotes 2020-10-23 16:56:03 +02:00
Theo Arends 500fb147c4 Add Breaking Changed to Release Notes
- Support for EZO RTD sensors by Christopher Tremblay (#9585)
- On ZigbeeBridge support for glowing led when permit join is active (#9581)
- Support for PWM Dimmer multi-press and ledmask (#9584)
2020-10-20 14:04:29 +02:00
Theo Arends 38e2638f07 Add support for EZO Ph and ORP sensors
Add support for EZO Ph and ORP sensors by Christopher Tremblay (#9567)
2020-10-18 15:36:17 +02:00
Theo Arends 330109d67c Add optional support for Orno WE517
Add optional support for Orno WE517-Modbus energy meter by Maxime Vincent (#9353)
2020-10-02 16:37:43 +02:00
Theo Arends 760d702fd0 Add optional support for Mitsubishi Electric HVAC
Add optional support for Mitsubishi Electric HVAC by David Gwynne (#9237)
2020-10-02 15:10:21 +02:00
Jason2866 cb0df141f4 Squashed commit of the following:
commit 0917b430c3b76e26fad584ddacb1fc389e1b4c36
Author: Jason2866 <24528715+Jason2866@users.noreply.github.com>
Date:   Tue Sep 1 17:13:53 2020 +0200

    Domoticz

commit e878ae5ac4e2b72443598d699f76f1efbe90b5c2
Merge: 77957d70 46789ef4
Author: Jason2866 <24528715+Jason2866@users.noreply.github.com>
Date:   Tue Sep 1 13:24:37 2020 +0200

    Merge pull request #118 from device111/vl53l1x

    VL53L1X correction

commit 46789ef40b6b8a3fbf730ed69712e0790b876075
Author: device111 <48546979+device111@users.noreply.github.com>
Date:   Sun Aug 30 11:41:32 2020 +0200

    Update support_features.ino

commit 8f8720d37e5d81d6c483620a83936b2f5ffd9f43
Author: device111 <48546979+device111@users.noreply.github.com>
Date:   Sun Aug 30 11:36:24 2020 +0200

    VL53L1X correction

    sorry, but i have killed all of my repos..:-(

commit 77957d70435e99bb42b64b39acb7b7a176ecac79
Author: Jason2866 <24528715+Jason2866@users.noreply.github.com>
Date:   Fri Aug 28 13:54:25 2020 +0200

    use registry

commit d85954db35
Author: Jason2866 <24528715+Jason2866@users.noreply.github.com>
Date:   Thu Aug 27 14:43:20 2020 +0200

    No DOMOTICZ

commit e6d763f10b
Merge: 788e4681 6c5fdb4d
Author: Jason2866 <24528715+Jason2866@users.noreply.github.com>
Date:   Thu Aug 27 14:42:29 2020 +0200

    Merge remote-tracking branch 'Tasmota/development' into vl53l1x

commit 788e468145
Merge: 51491df1 33f3f9ef
Author: Jason2866 <24528715+Jason2866@users.noreply.github.com>
Date:   Wed Aug 26 14:50:28 2020 +0200

    Merge remote-tracking branch 'Tasmota/development' into vl53l1x

commit 51491df141
Author: Jason2866 <24528715+Jason2866@users.noreply.github.com>
Date:   Wed Aug 26 14:49:56 2020 +0200

    Real 0x52 is 0x29 in Arduino 7 bit

commit 00dad36b08
Author: Jason2866 <24528715+Jason2866@users.noreply.github.com>
Date:   Mon Aug 24 11:41:11 2020 +0200

    1.01

commit 50e88038c3
Author: Jason2866 <24528715+Jason2866@users.noreply.github.com>
Date:   Sun Aug 23 20:04:47 2020 +0200

    correct support_feature

commit e5baabc41c
Author: Jason2866 <24528715+Jason2866@users.noreply.github.com>
Date:   Sun Aug 23 19:53:15 2020 +0200

    VL53L1X
2020-09-01 17:24:36 +02:00
device111 3d829a02a9 AHT1x driver: AHT20 support added
- Update support of AHT20 sensor
- refactor some globals anf if's
2020-08-27 11:44:24 +02:00