4b647928aa
Bump version to 6.6.0.12
...
* Redesign command Tariff to now default to 0 (=disabled) and allowing to set both Standard Time (ST) and Daylight Savings Time (DST) start hour (#6282 )
* Commands Tariff1 23 = Tariff1 ST, Tariff2 7 = Tariff2 ST, Tarriff3 22 = Tarrif1 DST, Tariff4 6 = Tariff2 DST, Tariff9 0/1 = Weekend toggle
2019-09-10 16:18:23 +02:00
53235a3382
Redesign Energy Total calculation
...
* Redesign Energy Total calculation
* Increase SDM120 modbus interval time to 200mS (#6282 )
2019-09-06 18:02:31 +02:00
ab89bb53a9
Oops
...
Oops
2019-09-05 17:45:43 +02:00
282591a0b2
Bump version to 6.6.0.10
...
Redesign Tuya support by Shantur Rathore (#6353 )
2019-09-05 10:41:08 +02:00
f88e87cfde
Refactor and document power control
...
Refactor and document power control
2019-09-04 12:20:04 +02:00
f4b5e565ef
Add driver USE_SDM120_2 with Domoticz P1 Smart Meter functionality as future replacement for USE_SDM120 - Pls test and report
...
Add driver USE_SDM120_2 with Domoticz P1 Smart Meter functionality as future replacement for USE_SDM120 - Pls test and report (#6282 )
2019-09-01 17:51:25 +02:00
b363bb55a9
Add compile time define USE_WS2812_HARDWARE to select hardware type WS2812, WS2812X, WS2813, SK6812, LC8812 or APA106 (DMA mode only)
...
Add compile time define USE_WS2812_HARDWARE to select hardware type WS2812, WS2812X, WS2813, SK6812, LC8812 or APA106 (DMA mode only)
2019-08-30 14:35:08 +02:00
48783a4772
Add define USE_WS2812_BTYPE to select different bitbang timing
...
Add define USE_WS2812_BTYPE to select different bitbang timing (#6292 )
2019-08-29 18:03:30 +02:00
f31b903fab
Bump version to 6.6.0.8
...
* Add Tuya Energy monitoring by Shantur Rathore
* Add phase 1 Domoticz P1 Smart Meter support using energy sensors handled by xdrv_03_energy.ino based on an idea by pablozg
* Add commands Tariff1 0..23 (start Off-Peak hour), Tariff2 0..23 (start Standard hour) and Tariff3 0/1 (Saturday and Sunday Off-Peak)
2019-08-27 17:01:12 +02:00
231a1ba137
Tuya Serial: Add support for power metering
...
Capable Tuya serial devices send power metering data over serial interface. User needs to identify the ids of all power metering functions and set as
SetOption44 -> Voltage
SetOption45 -> Current
SetOption46 -> Power
2019-08-27 10:50:34 +01:00
579f68cf2f
Tuya Dimmer: Add support for dimmers with max 24
...
New Tuya Dimmer has dim values from 0 to 24. Currently the code expects it to be 0-100 or 0-255.
With this change we move the flag to a param and use that to calculate correct dim percentage.
This change also makes sure to update settings on version upgrade.
2019-08-27 10:46:27 +01:00
427dee028d
Fix compile error
...
Fix compile error
2019-08-25 17:30:12 +02:00
ef63883a1c
Refactor Button, Switch and Rotary to save code space
...
Refactor Button, Switch and Rotary to save code space
2019-08-17 16:19:58 +02:00
38c6254833
Refactor light driver saving code space
...
Refactor light driver saving code space
2019-08-17 13:17:30 +02:00
9746489380
Bump version to 6.6.0.5
...
* Add command WebSensor<sensor number> 0/1 to control display of sensor data in web GUI (#6085 )
* Change some table locations from RAM to Flash
2019-08-16 16:12:33 +02:00
23ec00a452
Add command Buzzer
...
Add command Buzzer with optional parameters <number of beeps>,<duration of beep in 100mS steps>,<duration of silence in 100mS steps> enabled when a buzzer is configured (#5988 )
2019-08-12 17:18:08 +02:00
c9139514d0
Add ZigBee support phase 1 - low level MQTT ZNP messages for CC2530 devices
2019-08-09 22:52:33 +02:00
afb39aa680
Add support for CHIRP soil moisture sensor by Christian Baars
...
Add support for CHIRP soil moisture sensor by Christian Baars
2019-08-07 12:08:13 +02:00
81ca44dba2
Add SetOption68 to enable multi-channel PWM instead of a single light ( #6134 )
2019-08-06 10:57:50 +02:00
49022d0320
6.6.0.2 Add support for Sonoff iFan03 as module 71
...
Add support for Sonoff iFan03 as module 71 (#5988 )
2019-07-14 15:23:02 +02:00
0243e2be7e
Add command SetOption42 0..255 to set over temperature in Celsius. Defaults to 90
...
Add command SetOption42 0..255 to set over temperature in Celsius. Defaults to 90 (#6036 )
2019-07-08 14:16:33 +02:00
86314e24e5
Fix ambiguous Tuya set relay option by adding command SetOption41 allowing to control number of virtual relays
...
Fix ambiguous Tuya set relay option by adding command SetOption41 allowing to control number of virtual relays (#6039 )
2019-07-08 12:42:46 +02:00
46210bc9f0
Add command SetOption40 0..250
...
Add command SetOption40 0..250 to disable button functionality if activated for over 0.1 second. Needs SetOption1 1 and SetOption13 0 (#5449 )
2019-06-19 12:37:35 +02:00
5f3be7ca87
Add define USE_DHT to my_user_config.h to save space in sonoff-basic.bin
...
Add define USE_DHT to my_user_config.h to save space in sonoff-basic.bin
2019-06-16 17:03:41 +02:00
12da2fd6f9
Add define USE_COUNTER to my_user_config.h to save space in sonoff-basic.bin and sonoff-minimal.bin
...
Add define USE_COUNTER to my_user_config.h to save space in sonoff-basic.bin and sonoff-minimal.bin
2019-06-16 16:43:23 +02:00
073fd5c2cd
6.5.0.15 Change pubsubclient MQTT_KEEPALIVE from 10 to 30 seconds
...
6.5.0.15 20190606
* Change pubsubclient MQTT_KEEPALIVE from 10 to 30 seconds in preparation of AWS IoT support
2019-06-06 12:14:04 +02:00
164b3aaf11
Add command SetOption39 1..255 to control CSE7766 (Pow R2) or HLW8032 (Blitzwolf SHP5) handling of power loads below 6W
...
Add command SetOption39 1..255 to control CSE7766 (Pow R2) or HLW8032 (Blitzwolf SHP5) handling of power loads below 6W. Default setting is 128 (#5756 )
2019-06-04 17:30:03 +02:00
22663fc10c
6.5.0.13 Add command SetOption38 6..255
...
6.5.0.13 20190527
* Add command SetOption38 6..255 to set IRReceive protocol detection sensitivity mimizing UNKNOWN protocols (#5853 )
2019-05-27 11:56:14 +02:00
4d070bfb15
Change default PowerDelta from 80% to 0% on new installations
...
Change default PowerDelta from 80% to 0% on new installations (#5858 , #5028 , #4813 , #4130 , #4145 , #3795 , #3778 , #3660 , #3648 )
2019-05-24 15:04:48 +02:00
ae3d7e0122
PWM using 10 bits resolution, LST_MAX created
2019-05-02 22:50:19 +02:00
5e810f1ff3
Add Shelly 2.5 overtemp functionality
...
* Add all temperature, humidity and pressure for global access
* Add Shelly 2.5 overtemp functionality
* Fix Shelly 2.5 I2C address priority issue when VEML6070 code is present by disabling VEML6070 for Shelly 2.5 (#5592 )
2019-04-15 18:12:42 +02:00
2aad0567bf
Change some defines to const
...
Change some defines to const
2019-03-30 16:29:27 +01:00
b7f89c0a8c
6.5.0.1 Change GUI data collection
...
6.5.0.1 20190319
* Change Web GUI sensor data collection
2019-03-19 17:31:43 +01:00
37e1b31937
Add support for sensor SCD30
...
* Add support for sensor SCD30 (#5434 )
* Add support for commands in sensor drivers
2019-03-10 13:33:32 +01:00
48f6b09987
Initialisation and updating of color mapping added
2019-02-24 23:48:03 +00:00
945e7000dd
Implement full color remapper
2019-02-24 21:03:33 +01:00
4492a14574
Added SetOption37 for RGB remapping
2019-02-24 12:07:15 +00:00
38b81302e3
sm16716: added config option for custom rgb order
2019-02-24 09:26:10 +04:00
4993d16ecb
Implement WifiConfig 7
2019-02-21 17:49:11 +01:00
cee9fee756
Make pwm scheme 0 sleep optional
...
Make pwm scheme 0 sleep optional (enabled by default)
2019-02-18 08:19:17 +02:00
d7b8a6453d
Added preprocessor constant for LT_SM16716 for improved code readability
...
Note that this differs from other LT_* in that it's not an enum
Ensure the SM16716 codepath is only taken when the top half of light_type is LT_SM16716
2019-02-01 19:41:12 -05:00
2c164a8b4b
6.4.1.13 Add boot loop offset
...
6.4.1.13 20190130
* Add command SetOption36 to control boot loop default restoration (#4645 , #5063 )
2019-01-30 14:34:31 +01:00
505c4794d1
6.4.1.11 Rewrite interlock
...
6.4.1.11 20190124
* Remove command SetOption14 as it has been superseded by command Interlock
* Remove command SetOption63 as it has been superseded by command Interlock
* Add command Interlock 0 / 1 / 1,2 3,4 .. to control interlock ON/OFF and add up to 8 relays in 1 to 4 interlock groups (#5014 )
2019-01-25 17:46:27 +01:00
9f030ae431
Change color temp with rotary when Button1 pressed
2019-01-15 00:45:19 +00:00
2aac0683be
Add support for Mi Desk Lamp
2019-01-14 22:53:15 +00:00
447ec6256e
6.4.1.4 Update Copyright (C) 2019
...
6.4.1.4 20190101
* Update Copyright (C) 2019
2019-01-01 13:55:01 +01:00
b2005fba40
introduce new api-call for dimmer-devices
2018-12-17 18:29:42 +01:00
dfa0d2ef11
Add Domoticz Selector for Fanspeed
...
Add support for iFan02 Fanspeed in Domoticz using a selector (#4517 )
2018-12-06 10:49:49 +01:00
24ef9ab6b8
Fix Compilation issue with STAGE Core
...
Now the Stage core has the the same STR macro defined in sonoff.h.
2018-12-03 17:38:31 -03:00
6050cd40f3
Merge sleep command
2018-12-01 18:47:25 +02:00
Theo Arends
Shantur Rathore
Stephan Hadinger
Gabor Simon
netpok
Andre Thomas
Colin Kuebler
dh.harald
Joel Stein
Adrian Scillato