ffc1505872
Fix exception caused by wrong baudrate selection
...
Fix exception caused by wrong baudrate selection
2019-03-12 10:21:33 +01:00
baa5825569
Free some flash
...
Free some flash
2019-03-11 10:38:41 +01:00
37e1b31937
Add support for sensor SCD30
...
* Add support for sensor SCD30 (#5434 )
* Add support for commands in sensor drivers
2019-03-10 13:33:32 +01:00
aec3842bee
Merge pull request #5420 from laurentdong/Code-review
...
Code review: Copy string with strlcpy() instead of snprintf()
2019-03-09 12:22:07 +01:00
b87afc3bcb
Code review: Copy string with strlcpy() instead of snprintf()
...
Copying string with snprintf() is unsafy and slow because it check and replace plcaehold (%?)
2019-03-08 13:24:02 -05:00
0d8545f658
Add command Template 255
...
Add command Template 255 to copy module configuration over to current active template and store as user template named Merged (#5371 )
2019-03-08 17:42:21 +01:00
4ba3331bc7
Merge pull request #5417 from emontnemery/fix_bad_snprintf
...
Fix bad snprintf in format()
2019-03-08 16:45:07 +01:00
168b1332e0
Fix bad snprintf in format()
2019-03-08 16:28:46 +01:00
06a9fbd792
Changed logging message handling
...
Changed logging message handling
2019-03-08 15:15:42 +01:00
01ce2a31d3
Implement RGB CT linking
2019-02-25 22:29:39 +01:00
9f00978a79
Fix Domoticz Color regression
...
Fix Domoticz Color regression (#5310 )
2019-02-25 19:47:45 +01:00
48f6b09987
Initialisation and updating of color mapping added
2019-02-24 23:48:03 +00:00
68c60c321e
Handle too many command data
...
Handle too many command data
2019-02-23 19:19:31 +01:00
49f0b514eb
Fix some exceptions and watchdogs
...
* Fix some exceptions and watchdogs due to lack of stack space - part 2
* Add command SetOption62 0/1 to disable retain on Button or Swith hold messages (#5299 )
* Add option WifiConfig 7 to allow reset of device in AP mode without admin password (#5297 )
2019-02-22 12:04:05 +01:00
6cbfb0308a
Check no hold retain flag on hold action sending
2019-02-21 21:30:30 +01:00
3c58f5b7b9
Add password validation to password command
2019-02-21 15:57:45 +01:00
05b0280019
6.4.1.18 - Fix some exceptions and watchdogs
...
6.4.1.18 20191221
* Fix some exceptions and watchdogs due to lack of stack space - part 1 (#5215 )
2019-02-21 14:31:31 +01:00
32c1e2d13c
Tuning uptime and add utctime
...
Tuning uptime and add utctime
2019-02-19 10:48:19 +01:00
1da8f94a05
Introduce Reset 6
2019-02-18 21:52:22 +02:00
3c3b5bb8ca
Add property Downtime
...
Add property Downtime to state and status 11 message representing the duration of wifi connection loss
2019-02-18 18:02:22 +01:00
4884a94b6d
Add LinkCount and MqttCount
...
* Add property LinkCount to state and status 11 message representing number of Wifi Link re-connections
* Add property MqttCount to status 6 message representing number of Mqtt re-connections
2019-02-18 17:05:25 +01:00
e898dc03e7
Add Wifi Link Connection Count
...
Add Wifi Link Connection (Retry) count to state message. Always starts with 1 being the initial connection.
2019-02-18 15:41:41 +01:00
4d0ab9448d
Fix unsupported sensor ids
...
Fix unsupported sensor ids popping up after a config restore
2019-02-17 16:43:52 +01:00
a201dd1222
Remove command SetOption62
...
Remove command SetOption62 as it's functionality is replaced by user changing the device template (#5255 )
2019-02-17 16:05:53 +01:00
e2540f0afe
Update sonoff.ino
...
Prep for template menu
2019-02-17 10:42:55 +01:00
14d5f7fb54
Fix GUI password and Add rule expression
...
* Fix GUI wifi password acception starting with asteriks (*) (#5231 , #5242 )
* Add rule expression enabled by define USE_EXPRESSION in my_user_config.h (#5210 )
2019-02-16 16:17:17 +01:00
7c9720de9d
Merge pull request #5210 from laurentdong/development
...
Introduce Expression in Rules - Updated
2019-02-16 15:49:46 +01:00
77db7ba0ff
6.4.1.17 Change template stability
...
6.4.1.17 20190214
* Change template update by removing possibility to add user module config keeping template as defined (#5222 )
2019-02-14 16:48:28 +01:00
b9f6bf402a
Add CFG_HOLDER to status 1
...
Add parameter CFG_HOLDER to status 1 message (#5206 )
2019-02-13 10:50:02 +01:00
4b4b3709ad
Introduce Expression in Rules
...
Support use an expression as paramter in some rule commands, include Var<x>, Mem<x> and Ruletimer<x>.
Expression is constructed by constants (float number), variables (var<x>, mem<x>, Time, Uptime, Sunrise, Sunset), operators and round brackets.
Currently support 6 operators, order by priority from high to low:
^ (power)
% (modulo)
*, /
+, -
Commands examples:
Var1 3.14 * (MEM1 * (10 + VAR2 ^2) - 100) % 10 + uptime / (2 + MEM2)
Ruletimer4 Time - Sunrise + MEM2/2
2019-02-12 21:46:42 -05:00
567bc93623
Add Template GUI update
...
Initial support for online template change using command Template or GUI Configure Other (#5177 )
2019-02-12 11:55:47 +01:00
98ae3eaf54
6.4.1.16 Online template change
...
6.4.1.16 20190211
* Initial support for online template change using command Template (#5177 )
2019-02-11 19:21:49 +01:00
3a59084377
Enable group status messages
...
Add status message to former declined group commands (#5145 )
2019-02-09 13:37:27 +01:00
ab11096f3a
Add command SerialDelimiter 128
...
Add command SerialDelimiter 128 to filter reception of only characters between ASCII 32 and 127 (#5131 )
2019-02-09 13:25:15 +01:00
7b93df4978
Merge branch 'development' into sm16716
2019-02-08 20:00:53 +04:00
ae277f59cf
Change image defines
...
6.4.1.15 20190208
* Change image name BE_MINIMAL to FIRMWARE_MINIMAL (#5106 )
* Change image names USE_xyz to FIRMWARE_xyz (#5106 )
2019-02-08 14:55:45 +01:00
e23d4201c1
Merge branch 'development' into sm16716
2019-02-04 16:48:49 +04:00
6ee3d1abc6
Fix IR local echo
...
Fix IR local echo
2019-02-03 18:45:20 +01:00
54aaaf50c9
6.4.1.14 Add diag info to status 3
...
6.4.1.14 20190203
* Add SetOption32 until SetOption49 diagnostic information to Status 3 report as replacement for second property value in SetOption property name
* Add Resolution property to Status 3 report providing previous SetOption second value property
2019-02-03 12:38:41 +01:00
d7b8a6453d
Added preprocessor constant for LT_SM16716 for improved code readability
...
Note that this differs from other LT_* in that it's not an enum
Ensure the SM16716 codepath is only taken when the top half of light_type is LT_SM16716
2019-02-01 19:41:12 -05:00
bbce19a74e
Merge branch 'development' into sm16716
2019-02-01 08:27:35 +04:00
3a43050d93
Integrated Gabor's SM16716 code into the light driver code
...
Removed redundant processing and variables
Added new light type to distinguish SM16716 devices
2019-01-30 17:19:40 -05:00
2c164a8b4b
6.4.1.13 Add boot loop offset
...
6.4.1.13 20190130
* Add command SetOption36 to control boot loop default restoration (#4645 , #5063 )
2019-01-30 14:34:31 +01:00
304ac6fe44
6.4.1.12 code changes (byte/boolean)
...
6.4.1.12 20190128
* Change code use of boolean to bool and byte to uint8_t
* Change code uint8_t flags to bool flags
2019-01-28 14:08:33 +01:00
dc75b473cf
Add support for inverted buttons
...
* Add core version conditional compile options to provided PWM files (#4917 )
* Add support for inverted buttons and inverted buttons without pullup (#4914 )
2019-01-27 14:54:28 +01:00
1fb7eb646f
Add 50 mSec delay
...
Add 50 mSec delay between interlocked relay switch
2019-01-25 18:30:10 +01:00
505c4794d1
6.4.1.11 Rewrite interlock
...
6.4.1.11 20190124
* Remove command SetOption14 as it has been superseded by command Interlock
* Remove command SetOption63 as it has been superseded by command Interlock
* Add command Interlock 0 / 1 / 1,2 3,4 .. to control interlock ON/OFF and add up to 8 relays in 1 to 4 interlock groups (#5014 )
2019-01-25 17:46:27 +01:00
7745e1e779
Fix Hass Software Watchdog
...
Fix Hass Software Watchdog exception during discovery (#4988 )
2019-01-22 12:46:55 +01:00
b5824fc361
Housekeeping
2019-01-18 10:52:18 +01:00
e7e378f463
Add (S)SerialSend features
...
* Fix mDNS addService (#4938 , #4951 )
* Add (S)SerialSend3 escape sequence \x to allow hexadecimal byte value (#3560 , #4947 )
* Add SerialBridge command SSerialSend5 <hexdata>
2019-01-17 17:48:34 +01:00
e5fd45c9c8
6.4.1.9 Fix mDNS addService
...
6.4.1.9 20190115
* Add support for Mi LED Desk Lamp with rotary switch (#4887 )
* Fix mDNS addService (#4938 )
2019-01-15 16:11:42 +01:00
2aac0683be
Add support for Mi Desk Lamp
2019-01-14 22:53:15 +00:00
15e4918238
As requested in issue 824# by ascillato2, implement split interlock.
...
=> Split interlock of SONOFF with more than 2 channel into 2 groups
=> This is needed for shutter and similar utilization
2019-01-13 11:00:02 +01:00
23fa3c624a
Clarify Link/Power LED selection
...
Clarify Link/Power LED selection
2019-01-08 11:44:45 +01:00
148fe4aec0
Only restart if module supports it
2019-01-07 16:58:44 +01:00
a23f01080b
6.4.1.8 Add template flags
...
6.4.1.8 20190107
* Change sonoff_template.h layout regarding optional module flags like ADC0
* Add command SetOption62 1 to force no Button/Switch pullup on dedicated modules. Currently only supported on Shelly2 (#4841 )
2019-01-07 16:33:18 +01:00
95f39be2ef
Change button driver making it modular
...
Change button driver making it modular
2019-01-07 12:38:47 +01:00
3d31dd1457
Disable Button/Switch 4 seconds
...
Disable both Buttons and Switches 4 seconds after power on to workaround Wemos and Obi startup issues.
2019-01-07 10:15:00 +01:00
e1d903eab3
Add no pull-up control to Shelly 2
...
Add no pull-up control to Shelly 2 module (default is pull-up, change GPIO2 to Switch3n for no pull-up) (#4841 )
2019-01-06 18:50:56 +01:00
0195cabbd6
Add relay status functionality to LED2
...
Add relay status functionality to LED2 when configured leaving LED1 for (wifi/mqtt) status indication
2019-01-06 18:02:21 +01:00
67cf1dbbcf
6.4.1.5 Add mDns user control
...
6.4.1.5 20190103
* Remove command SetOption35 0-255 for mDNS start-up delay (#4793 )
* Add command SetOption55 0/1 to disable/enable mDNS (#4793 )
2019-01-03 17:30:54 +01:00
447ec6256e
6.4.1.4 Update Copyright (C) 2019
...
6.4.1.4 20190101
* Update Copyright (C) 2019
2019-01-01 13:55:01 +01:00
7ebb7a6067
6.4.1.3 Change sonoff_template.h
...
6.4.1.3 20181229
* Change sonoff_template.h module lay-out by removing non-configurable GPIOs
2018-12-29 19:46:28 +01:00
afe83a3460
Prep for template tuning
2018-12-29 17:19:13 +01:00
5a44b12870
6.4.1.2 Rewrite Switch driver
...
6.4.1.2 20181228
* Change switch driver making it modular and introduce input filter (#4665 , #4724 )
* Add define DS18B20_INTERNAL_PULLUP to select internal input pullup when only one DS18B20 sensor is connected eliminating external resistor (#4738 )
* Add variable %timestamp% to rules (#4749 )
2018-12-28 16:35:19 +01:00
9640931345
Change switch debounce
...
Change switch input detection by optimizing switch debounce (#4724 )
2018-12-26 14:21:00 +01:00
0b10f48e41
6.4.1.1 Fix most compiler warnings
...
6.4.1.1 20181224
* Fix most compiler warnings
2018-12-24 18:14:25 +01:00
77c07a2e00
Change FallbackTopic
...
Change FallbackTopic from cmnd/<mqttclient>/ to cmnd/<mqttclient>_fb/ to discriminate from Topic (#1528 )
2018-12-23 14:48:57 +01:00
e2cd656286
6.4.0.3 Hass and Alexa fixes
...
6.4.0.3 20181222
* Change Hass discovery to short MQTT messages as used by Hass 0.81 and up (#4711 )
* Change FallbackTopic detection (#4706 )
* Add define WIFI_SOFT_AP_CHANNEL in my_user_config.h to set Soft Access Point Channel number between 1 and 13 as used by Wifi Manager web GUI (#4673 )
* Fix Alexa "this value is outside the range of the device". Needs power cycle and Alexa deletion/discovery cycle. (#3159 , #4712 )
2018-12-22 16:13:07 +01:00
dcbf5a8c94
Fix ArduinoOTA for Core 2.5.0 (fix is backwards compatible)
...
https://github.com/arendst/Sonoff-Tasmota/issues/4619
2018-12-13 23:04:48 +00:00
67ec0678a3
6.3.0.17 Add features
...
6.3.0.17 20181211
* Add support for TheoV2 sensors as documented on https://sidweb.nl
* Add support for SDM220 (#3610 )
* Enhance support for MPU6050 using DMP (#4581 )
2018-12-11 14:24:52 +01:00
a65041fee5
Enabled forced local operation when button- or switchtopic is set
2018-12-08 08:44:59 +01:00
9a3c3895fb
Fix Domoticz Fanspeed
...
Fix Domoticz Fanspeed
2018-12-06 15:03:42 +01:00
61aa428646
6.3.0.16 - Bump version
...
6.3.0.16 20181201
* Add support for iFan02 Fanspeed in Domoticz using a selector (#4517 )
* Add Announce Switches to MQTT Discovery (#4531 )
2018-12-06 11:17:25 +01:00
9471163d86
Merge pull request #4531 from emontnemery/hass_announce_switch
...
MQTT Discovery - Announce switches
2018-12-06 11:02:40 +01:00
e64c8d61c9
Update sonoff.ino
2018-12-06 11:01:57 +01:00
dfa0d2ef11
Add Domoticz Selector for Fanspeed
...
Add support for iFan02 Fanspeed in Domoticz using a selector (#4517 )
2018-12-06 10:49:49 +01:00
4b287ab4cb
Final fix compile error ( #4509 )
...
Final fix soft_spi_flg compile error (#4509 )
2018-12-05 12:23:42 +01:00
be19af15e2
Announce switches
2018-12-04 21:32:02 +01:00
a2e865bb44
Add dummy soft_spi_flg to satisfy compiler
...
@arendst Just adding this, for now, to satisfy the compiler until you get time to merge the rest of the Software SPI support.
2018-12-02 18:53:49 +02:00
74172f14d3
Further improve Hass auto discovery
2018-12-02 16:39:59 +01:00
eb3c1a327d
6.3.0.15 Update dynamic sleep
...
6.3.0.15 20181201
* Removed command SetOption36 (#4497 )
* Add command SetOption60 0/1 to select dynamic sleep (0) or sleep (1) (#4497 )
2018-12-01 18:53:42 +01:00
6050cd40f3
Merge sleep command
2018-12-01 18:47:25 +02:00
5f402c8f34
Fix sleep->SetOption36 transition
2018-12-01 00:18:08 +02:00
3613946f18
Prevent sleep and SetOption36 being used concurrently
...
Prevent sleep and SetOption36 being used concurrently
2018-11-30 20:00:20 +02:00
eb851a9a90
Merge pull request #4450 from emontnemery/hass_send_tele
...
WIP - Support sending tele/STATUS as state/RESULT
2018-11-26 12:49:43 +01:00
acdbd39124
Fix math in LoadAvg
...
Fix the math in LoadAvg calculation. To keep average we take away one Nth of loops and add one Nth of current cycle ration to the average.
Now the math makes more sense... maximum load average on setoption36 0/1 = 999 (as it should be)
2018-11-26 11:37:15 +02:00
eda60b6124
Support sending tele/STATUS as state/RESULT
2018-11-25 21:27:19 +01:00
243ec16d80
Fix another calcuation error
...
Fix another calcuation error
2018-11-25 17:31:53 +01:00
0b14a95082
Remove assumption of 100% to report correctly
...
Remove the assumption of 100% loop duty cycle as we want an accurate loop load average and not a percentage as such - so if it overshoots the value stored for setoption36 this should be known by looking at the load average and not be distorted by reducing it to 100 basis points on the assumption that my_acitivity took as long as setoption36.
2018-11-25 17:52:07 +02:00
05be1ee21c
Fix exception due to divide by 0
...
Fix exception due to divide by 0
2018-11-25 16:41:29 +01:00
7c84f892fc
Add target loop delay to telemetry
2018-11-25 14:29:53 +02:00
c22fcc2a3a
Update CPU average load function
...
Remove unnecessary manipulations :)
2018-11-24 19:00:42 +02:00
52eeef95f0
Add CPU average load
...
Add CPU average load to state message (#4431 )
2018-11-24 17:43:18 +01:00
4700e49d70
Update sonoff.ino
2018-11-24 17:16:27 +01:00
0e56044eb5
Add main loop load average
...
Add main loop avarage duty cycle measured against setoption36 value to telemetry data as LoadAvg
2018-11-24 18:12:49 +02:00
c436ed5d3d
Update boot delay code
...
Since the driver boot delay has been removed, this is a better strategy for getting a smoother boot cpu cycle vs loop delay.
2018-11-22 17:13:55 +02:00
d71ae77900
6.3.0.12 Change boot delays
...
6.3.0.12 20181122
* Remove delays introduced in 6.3.0.11 (#4233 )
* Add additional start-up delay during initial wifi connection
* Add support for I2C MGC3130 Electric Field Effect sensor by Christian Baars (#3774 , #4404 )
* Add initial support for Hass sensor discovery (#4380 )
2018-11-22 12:25:18 +01:00
23c16e58a9
Housekeeping
...
Housekeeping
2018-11-20 15:00:24 +01:00
e34a1f0719
Add wifi network scan
...
* Add command SetOption56 0/1 to enable wifi network scan and select highest RSSI (#3173 )
2018-11-19 18:07:25 +01:00
Theo Arends
Laurent Dong
Erik
netpok
Gabor Simon
andrethomas
Laurent
Colin Kuebler
dh.harald
lobocobra
Adrian Scillato
andrethomas2