mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
3,181 Commits 10 Branches 111 Tags 1.1 GiB
Commit Graph

139 Commits

Author SHA1 Message Date
Theo Arends 06a9fbd792 Changed logging message handling 
Changed logging message handling
 2019-03-08 15:15:42 +01:00
Theo Arends c0f20d31ff 6.4.1.19 Add command SetOption37 
6.4.1.19 20190222
 * Add command SetOption37 for RGBCW color mapping (#5326)
 2019-02-25 11:14:33 +01:00
Gabor Simon 48f6b09987 Initialisation and updating of color mapping added 2019-02-24 23:48:03 +00:00
netpok 945e7000dd Implement full color remapper 2019-02-24 21:03:33 +01:00
Gabor Simon 4492a14574 Added SetOption37 for RGB remapping 2019-02-24 12:07:15 +00:00
gfrancesco deeceaf2a0 Add configuration parameter to send MQTT telemetry on status change (SetOption59) 2019-02-17 22:05:02 +01:00
Theo Arends 98ae3eaf54 6.4.1.16 Online template change 
6.4.1.16 20190211
 * Initial support for online template change using command Template (#5177)
 2019-02-11 19:21:49 +01:00
Theo Arends ae277f59cf Change image defines 
6.4.1.15 20190208
 * Change image name BE_MINIMAL to FIRMWARE_MINIMAL (#5106)
 * Change image names USE_xyz to FIRMWARE_xyz (#5106)
 2019-02-08 14:55:45 +01:00
Theo Arends de41a88bec Fix stop flash rotate functionality 
Fix stop flash rotate functionality
 2019-02-01 14:05:55 +01:00
Theo Arends 9825d6ffb6 Add resiliency to saved Settings 
Add resiliency to saved Settings (#5065)
 2019-01-30 16:27:17 +01:00
Theo Arends 0007df121a Update settings.ino 
Fix for new installs
 2019-01-30 15:14:24 +01:00
Theo Arends 2c164a8b4b 6.4.1.13 Add boot loop offset 
6.4.1.13 20190130
 * Add command SetOption36 to control boot loop default restoration (#4645, #5063)
 2019-01-30 14:34:31 +01:00
Theo Arends 304ac6fe44 6.4.1.12 code changes (byte/boolean) 
6.4.1.12 20190128
 * Change code use of boolean to bool and byte to uint8_t
 * Change code uint8_t flags to bool flags
 2019-01-28 14:08:33 +01:00
Theo Arends 2827de40a3 Set initial legacy interlock state 
Set initial legacy interlock state
 2019-01-27 11:02:12 +01:00
Theo Arends 505c4794d1 6.4.1.11 Rewrite interlock 
6.4.1.11 20190124
 * Remove command SetOption14 as it has been superseded by command Interlock
 * Remove command SetOption63 as it has been superseded by command Interlock
 * Add command Interlock 0 / 1 / 1,2 3,4 .. to control interlock ON/OFF and add up to 8 relays in 1 to 4 interlock groups (#5014)
 2019-01-25 17:46:27 +01:00
Theo Arends fc1198c1f9 Add features 
* Add support for Luminea ZX2820 Smart Socket with Energy monitoring (#4921)
 * Add define MDNS_ENABLE to control initial mDNS state (#4923)
 * Add split interlock part 1 (#4910)
 2019-01-14 10:57:01 +01:00
Theo Arends 458b030598 Add Eeprom support 
Add initial Eeprom support
 2019-01-04 16:05:52 +01:00
Theo Arends 67cf1dbbcf 6.4.1.5 Add mDns user control 
6.4.1.5 20190103
 * Remove command SetOption35 0-255 for mDNS start-up delay (#4793)
 * Add command SetOption55 0/1 to disable/enable mDNS (#4793)
 2019-01-03 17:30:54 +01:00
Theo Arends 447ec6256e 6.4.1.4 Update Copyright (C) 2019 
6.4.1.4 20190101
 * Update Copyright (C) 2019
 2019-01-01 13:55:01 +01:00
Theo Arends 7ebb7a6067 6.4.1.3 Change sonoff_template.h 
6.4.1.3 20181229
 * Change sonoff_template.h module lay-out by removing non-configurable GPIOs
 2018-12-29 19:46:28 +01:00
Erik a65041fee5 Enabled forced local operation when button- or switchtopic is set 2018-12-08 08:44:59 +01:00
Theo Arends eb3c1a327d 6.3.0.15 Update dynamic sleep 
6.3.0.15 20181201
 * Removed command SetOption36 (#4497)
 * Add command SetOption60 0/1 to select dynamic sleep (0) or sleep (1) (#4497)
 2018-12-01 18:53:42 +01:00
andrethomas 6050cd40f3 Merge sleep command 2018-12-01 18:47:25 +02:00
andrethomas 33f85b2023
Upd settings.ino - set sleep=0 when SetOption36>0 
Update settings.ino - set sleep=0 when SetOption36>0
 2018-11-30 19:55:22 +02:00
Theo Arends 101cf83d7d
Update settings.ino 2018-11-27 10:54:34 +01:00
Adrian Scillato 5d11a4f444
Added command CalcRes 2018-11-26 21:16:47 -03:00
Theo Arends 4899178362 6.3.0.10 Add command SetOption36 
6.3.0.10 20181118
 * Add command SetOption36 0..255 milliseconds (10 default) to tune main loop dynamic delay
 2018-11-18 16:49:02 +01:00
Theo Arends 9eacabc4f0 Delay initial flash write 
* Stop enforcing flashmode dout but it is still mandatory
 * Moved bootcount update (being first) flash write to 10 seconds after restart
 2018-11-16 09:36:41 +01:00
Theo Arends a1ff029335 Revert "Quietly allow settings update" 
This reverts commit 999f0a3f92.
 2018-11-16 09:18:40 +01:00
Theo Arends 999f0a3f92 Quietly allow settings update 
Quietly allow settings update to solve issues caused by Reset command leading to unusable device
 2018-11-15 17:29:48 +01:00
andrethomas 4a7e7b0dbb Change C functions with () to (void) 2018-11-14 15:32:09 +02:00
Theo Arends 9fef82736d Prep drivers for management 
Prep drivers for management
 2018-11-07 10:30:03 +01:00
Theo Arends 15148f290d 6.3.0.4 Add SetSensorXX 
6.3.0.4 20181106
 * Add command SetSensorXX 0/1 to disable/re-enable compiled xsns_XX_sensor.ino driver
 2018-11-06 17:33:51 +01:00
Theo Arends 14a7424e9b Add command SetOption24 
Add command SetOption24 0/1 to select pressure unit as hPa or mmHg (#4241)
 2018-11-04 16:55:12 +01:00
Theo Arends 46a0a0afba Add minutes to commands Timezone 
Add minutes to commands Timezone to allow all possible world timezones
 2018-11-01 13:00:05 +01:00
Erik 87dc6fe20e Add basic support for color calibration 2018-09-29 16:55:53 +02:00
Theo Arends 1a0d630da2 Removed debug code 
Removed unavailable debug code (#3917)
 2018-09-28 11:48:55 +02:00
Theo Arends 43c3cf57d5 Shelly2 Cleanup 
Cleanup and debug updates
 2018-09-24 18:16:35 +02:00
Theo Arends 07dafe1631 6.2.0.2 - Energy monitoring 
6.2.0.2 20180904
 * Rewrite energy monitoring using energy sensor driver modules
 * Fix lost today and total energy value after power cycle (#3689)
 2018-09-04 16:22:34 +02:00
Theo Arends f7c38f24f3 6.1.1.14 Add boot loop detection 
Add boot loop detection and try to fix
 2018-08-30 14:27:33 +02:00
Theo Arends d69e88b50b 6.1.1.12 - Add debounce time 
6.1.1.12 20180827
 * Add commands ButtonDebounce 40..1000 and SwitchDebounce 40..1000 to have more control over debounce timing. Default is 50mS (#3594)
 2018-08-27 12:01:20 +02:00
Theo Arends bab6ae5644 6.1.1.8 - Fixes and Additions 
6.1.1.8
 * Fix MQTT reconnection detection when using TasmotaMqtt library (#3558)
 * Add build time setting of ButtonTopic and SwitchTopic (#3414)
 * Add display features and dynamic buffering
 2018-08-23 11:49:17 +02:00
Erik e21a155606 Build time setting of button and switch topic 2018-08-05 20:01:50 +02:00
Theo Arends 9e34d16e9a Fix sonoff-minimal 
Fix sonoff-minimal from using default settings
 2018-07-30 12:29:56 +02:00
Erik 76c102c09c Support send / receive of binary serial data 2018-07-27 12:17:34 +02:00
Theo Arends 612374cfbf Revisit Timers off/on 
6.1.1c
 * Add command Timers 0/1 to globally disable or enable armed timers (#3270)
 2018-07-20 16:12:37 +02:00
Theo Arends c896437124 v6.0.0c - Add spare SetOptions 
6.0.0c
* Add support for bitflags SetOption50 .. SetOption81 (#3118)
 2018-07-03 12:48:56 +02:00
Theo Arends 6e9602418d v6.0.0b - Support up to 8 switches 
6.0.0b
* Change number of switches from 4 to 8 (#2885, #3086)
 2018-06-28 14:28:14 +02:00
Theo Arends d4e414a6d5 v6.0.0a - Add CRC to Settings 
6.0.0a
* Add CRC to Settings making future upgrades more fail-safe
* Remove version 3, 4 and pre 5.2 settings auto-upgrade. See
https://github.com/arendst/Sonoff-Tasmota/wiki/Upgrade#migration-path
* Change default CFG_HOLDER from 0x20161209 to 4617 (=0x1209) - no
impact on default upgrades
 2018-06-02 16:59:09 +02:00
Theo Arends e6daeda43e Fix initial rule3 clearence 2018-05-24 16:36:12 +02:00