Commit Graph

160 Commits

Author SHA1 Message Date
Theo Arends da7ab3274b Fix setting default over temperature
Fix setting default over temperature
2019-07-08 16:50:23 +02:00
Theo Arends 0243e2be7e Add command SetOption42 0..255 to set over temperature in Celsius. Defaults to 90
Add command SetOption42 0..255 to set over temperature in Celsius. Defaults to 90 (#6036)
2019-07-08 14:16:33 +02:00
Theo Arends 1b69502d9b Code optimization - Change for(uint8_t in for (uint32_t
Code optimization - Change for(uint8_t in for (uint32_t
2019-06-30 16:44:36 +02:00
Theo Arends 30adce5648 Revert "Code optimization - Change for(uint8_t in for (uint32_t"
This reverts commit 5e1eac3f74.
2019-06-30 15:56:55 +02:00
Theo Arends 5e1eac3f74 Code optimization - Change for(uint8_t in for (uint32_t
Code optimization - Change for(uint8_t in for (uint32_t
2019-06-30 15:47:32 +02:00
Theo Arends 556fffe26a Fix possible compile error when users disable some features
Fix possible compile error when users disable some features (#5906)
2019-06-03 09:49:33 +02:00
Adrian Scillato f981284066
Add support for Arduino Stage Core
The actual Stage ESP8266 Core of Arduino (next 2.6.0) had changed the SPIFFS defines of the memory to FS due to a change in the libraries (https://github.com/esp8266/Arduino/pull/5511)
2019-05-30 18:28:22 -03:00
Theo Arends 22663fc10c 6.5.0.13 Add command SetOption38 6..255
6.5.0.13 20190527
 * Add command SetOption38 6..255 to set IRReceive protocol detection sensitivity mimizing UNKNOWN protocols (#5853)
2019-05-27 11:56:14 +02:00
Theo Arends 4d070bfb15 Change default PowerDelta from 80% to 0% on new installations
Change default PowerDelta from 80% to 0% on new installations (#5858, #5028, #4813, #4130, #4145, #3795, #3778, #3660, #3648)
2019-05-24 15:04:48 +02:00
Theo Arends 56615dce4e Add command AdcParam
Add command AdcParam to control ADC0 Temperature and Light formula parameters
2019-05-24 12:28:09 +02:00
Theo Arends 25feabb921 Fix Script and Rule System#Save
Fix Script and Rule System#Save
2019-05-19 14:59:07 +02:00
Theo Arends ad54ece2fb 6.5.0.10 Enable ADC0 by default
6.5.0.10 20190513
 * Enable ADC0 by default in my_user_config.h (#5671)
 * Add user configurable ADC0 to Module and Template configuration compatible with current FLAG options (#5671)
2019-05-13 15:56:01 +02:00
Stephan Hadinger 81fb2667b2 Set gamma correction as default behavior, ie Ledtable 1 2019-04-25 18:50:04 +02:00
Theo Arends df6645481e 6.5.0.7 Add command LedMask
6.5.0.7 20190410
 * Add command LedMask to assign which relay has access to power LED (#5602, #5612)
2019-04-10 14:26:36 +02:00
Theo Arends aa91caa35e 6.5.0.6 Add WebColor parameters to Settings
6.5.0.6 20190409
 * Add WebColor parameters to Settings making them persistent and remove the need for using a rule
 * Add alternative IRSend command syntax IRSend raw,<freq>,<header mark>,<header space>,<bit mark>,<zero space>,<one space>,<bit stream> (#5610)
2019-04-09 13:56:19 +02:00
Theo Arends 531c4fe44e Disable unused code
Disable unused code
2019-04-02 20:53:17 +02:00
Theo Arends 8ff2759ccc 6.5.0.4 Fix Configure Timer Web GUI
6.5.0.4 20190402
 * Fix Configure Timer Web GUI (#5568)
 * Add validation check when loading settings from flash
2019-04-02 15:47:39 +02:00
Theo Arends f7c30250c1 Change some more defines to const
Change some more defines to const
2019-03-31 11:59:04 +02:00
Theo Arends d9bd959119 Fix compile error (#5544)
Fix compile error (#5544)
2019-03-30 10:02:22 +01:00
Theo Arends e8e5d1c03c 6.5.0.3 Add command Sensor20
6.5.0.3 20190328
 * Add command Sensor20 1..255 to change Nova Fitness SDS01 working period in minutes (#5452)
2019-03-28 12:06:48 +01:00
Theo Arends e1c92b701b Change NULL to nullptr
Change NULL to nullptr
2019-03-26 18:26:50 +01:00
Theo Arends 06a9fbd792 Changed logging message handling
Changed logging message handling
2019-03-08 15:15:42 +01:00
Theo Arends c0f20d31ff 6.4.1.19 Add command SetOption37
6.4.1.19 20190222
 * Add command SetOption37 for RGBCW color mapping (#5326)
2019-02-25 11:14:33 +01:00
Gabor Simon 48f6b09987 Initialisation and updating of color mapping added 2019-02-24 23:48:03 +00:00
netpok 945e7000dd Implement full color remapper 2019-02-24 21:03:33 +01:00
Gabor Simon 4492a14574 Added SetOption37 for RGB remapping 2019-02-24 12:07:15 +00:00
gfrancesco deeceaf2a0 Add configuration parameter to send MQTT telemetry on status change (SetOption59) 2019-02-17 22:05:02 +01:00
Theo Arends 98ae3eaf54 6.4.1.16 Online template change
6.4.1.16 20190211
 * Initial support for online template change using command Template (#5177)
2019-02-11 19:21:49 +01:00
Theo Arends ae277f59cf Change image defines
6.4.1.15 20190208
 * Change image name BE_MINIMAL to FIRMWARE_MINIMAL (#5106)
 * Change image names USE_xyz to FIRMWARE_xyz (#5106)
2019-02-08 14:55:45 +01:00
Theo Arends de41a88bec Fix stop flash rotate functionality
Fix stop flash rotate functionality
2019-02-01 14:05:55 +01:00
Theo Arends 9825d6ffb6 Add resiliency to saved Settings
Add resiliency to saved Settings (#5065)
2019-01-30 16:27:17 +01:00
Theo Arends 0007df121a Update settings.ino
Fix for new installs
2019-01-30 15:14:24 +01:00
Theo Arends 2c164a8b4b 6.4.1.13 Add boot loop offset
6.4.1.13 20190130
 * Add command SetOption36 to control boot loop default restoration (#4645, #5063)
2019-01-30 14:34:31 +01:00
Theo Arends 304ac6fe44 6.4.1.12 code changes (byte/boolean)
6.4.1.12 20190128
 * Change code use of boolean to bool and byte to uint8_t
 * Change code uint8_t flags to bool flags
2019-01-28 14:08:33 +01:00
Theo Arends 2827de40a3 Set initial legacy interlock state
Set initial legacy interlock state
2019-01-27 11:02:12 +01:00
Theo Arends 505c4794d1 6.4.1.11 Rewrite interlock
6.4.1.11 20190124
 * Remove command SetOption14 as it has been superseded by command Interlock
 * Remove command SetOption63 as it has been superseded by command Interlock
 * Add command Interlock 0 / 1 / 1,2 3,4 .. to control interlock ON/OFF and add up to 8 relays in 1 to 4 interlock groups (#5014)
2019-01-25 17:46:27 +01:00
Theo Arends fc1198c1f9 Add features
* Add support for Luminea ZX2820 Smart Socket with Energy monitoring (#4921)
 * Add define MDNS_ENABLE to control initial mDNS state (#4923)
 * Add split interlock part 1 (#4910)
2019-01-14 10:57:01 +01:00
Theo Arends 458b030598 Add Eeprom support
Add initial Eeprom support
2019-01-04 16:05:52 +01:00
Theo Arends 67cf1dbbcf 6.4.1.5 Add mDns user control
6.4.1.5 20190103
 * Remove command SetOption35 0-255 for mDNS start-up delay (#4793)
 * Add command SetOption55 0/1 to disable/enable mDNS (#4793)
2019-01-03 17:30:54 +01:00
Theo Arends 447ec6256e 6.4.1.4 Update Copyright (C) 2019
6.4.1.4 20190101
 * Update Copyright (C) 2019
2019-01-01 13:55:01 +01:00
Theo Arends 7ebb7a6067 6.4.1.3 Change sonoff_template.h
6.4.1.3 20181229
 * Change sonoff_template.h module lay-out by removing non-configurable GPIOs
2018-12-29 19:46:28 +01:00
Erik a65041fee5 Enabled forced local operation when button- or switchtopic is set 2018-12-08 08:44:59 +01:00
Theo Arends eb3c1a327d 6.3.0.15 Update dynamic sleep
6.3.0.15 20181201
 * Removed command SetOption36 (#4497)
 * Add command SetOption60 0/1 to select dynamic sleep (0) or sleep (1) (#4497)
2018-12-01 18:53:42 +01:00
andrethomas 6050cd40f3 Merge sleep command 2018-12-01 18:47:25 +02:00
andrethomas 33f85b2023
Upd settings.ino - set sleep=0 when SetOption36>0
Update settings.ino - set sleep=0 when SetOption36>0
2018-11-30 19:55:22 +02:00
Theo Arends 101cf83d7d
Update settings.ino 2018-11-27 10:54:34 +01:00
Adrian Scillato 5d11a4f444
Added command CalcRes 2018-11-26 21:16:47 -03:00
Theo Arends 4899178362 6.3.0.10 Add command SetOption36
6.3.0.10 20181118
 * Add command SetOption36 0..255 milliseconds (10 default) to tune main loop dynamic delay
2018-11-18 16:49:02 +01:00
Theo Arends 9eacabc4f0 Delay initial flash write
* Stop enforcing flashmode dout but it is still mandatory
 * Moved bootcount update (being first) flash write to 10 seconds after restart
2018-11-16 09:36:41 +01:00
Theo Arends a1ff029335 Revert "Quietly allow settings update"
This reverts commit 999f0a3f92.
2018-11-16 09:18:40 +01:00