Commit Graph

20 Commits

Author SHA1 Message Date
Stephan Hadinger 15e37ef0bb Change converted double to float in rules, and replaced trigonometric functions from stdlib with smaller versions. 2019-07-01 18:20:43 +02:00
Theo Arends 1b69502d9b Code optimization - Change for(uint8_t in for (uint32_t
Code optimization - Change for(uint8_t in for (uint32_t
2019-06-30 16:44:36 +02:00
Theo Arends 30adce5648 Revert "Code optimization - Change for(uint8_t in for (uint32_t"
This reverts commit 5e1eac3f74.
2019-06-30 15:56:55 +02:00
Theo Arends 5e1eac3f74 Code optimization - Change for(uint8_t in for (uint32_t
Code optimization - Change for(uint8_t in for (uint32_t
2019-06-30 15:47:32 +02:00
Theo Arends 164b3aaf11 Add command SetOption39 1..255 to control CSE7766 (Pow R2) or HLW8032 (Blitzwolf SHP5) handling of power loads below 6W
Add command SetOption39 1..255 to control CSE7766 (Pow R2) or HLW8032 (Blitzwolf SHP5) handling of power loads below 6W. Default setting is 128 (#5756)
2019-06-04 17:30:03 +02:00
Theo Arends 4e95417db4 Add reset of Energy values when connection to sensor is lost for over 4 seconds
Add reset of Energy values when connection to sensor is lost for over 4 seconds (#5874, #5881)
2019-05-30 12:45:02 +02:00
Norbert Richter 0e518084d7 Fix CSE7766 Sensor invalid energy load steps prevention
fixes PR #5793 solution which can async (load overflow) forever until device restart
2019-05-20 08:52:05 +02:00
Norbert Richter 9ed9ac6621 CSE7766 Sensor (Sonoff S31/Pow R2) prevent invalid energy load steps
prevent invalid load delta steps even checksum of datastream from CSE is valid (issue #5789)
2019-05-14 12:13:42 +02:00
Theo Arends 5e810f1ff3 Add Shelly 2.5 overtemp functionality
* Add all temperature, humidity and pressure for global access
 * Add Shelly 2.5 overtemp functionality
 * Fix Shelly 2.5 I2C address priority issue when VEML6070 code is present by disabling VEML6070 for Shelly 2.5 (#5592)
2019-04-15 18:12:42 +02:00
Theo Arends f33c59249e Fix calibration calculation
Fix calibration calculation (#5246)
2019-02-17 15:30:15 +01:00
Theo Arends 16ec25bdff Prep for user config
Prep CSE7766 (S31 and PowR2) and MCP39F501 (Shelly2) for user configuration
2019-02-04 14:57:20 +01:00
Theo Arends 304ac6fe44 6.4.1.12 code changes (byte/boolean)
6.4.1.12 20190128
 * Change code use of boolean to bool and byte to uint8_t
 * Change code uint8_t flags to bool flags
2019-01-28 14:08:33 +01:00
Theo Arends 447ec6256e 6.4.1.4 Update Copyright (C) 2019
6.4.1.4 20190101
 * Update Copyright (C) 2019
2019-01-01 13:55:01 +01:00
Theo Arends 0b10f48e41 6.4.1.1 Fix most compiler warnings
6.4.1.1 20181224
 * Fix most compiler warnings
2018-12-24 18:14:25 +01:00
andrethomas 4a7e7b0dbb Change C functions with () to (void) 2018-11-14 15:32:09 +02:00
Theo Arends 4b7c797fb7 6.2.1.9 Apparent/Reactive Power
6.2.1.9 20180928
 * Add Apparent Power and Reactive Power to Energy Monitoring devices (#251)
2018-09-28 15:48:42 +02:00
Theo Arends 665a4abc47 Fix Pow R2 and S31 low power
* Add power value below 5W to Sonoff Pow R2 and S31 (#3745)
* Add force_update to Home Assistant discovery (#3873)
2018-09-22 16:09:13 +02:00
Theo Arends 7a767f104c 6.2.1.6 Remove some commands
6.2.1.6 20180922
 * Removed commands PowerCal, VoltageCal and CurrentCal as more functionality is provided by commands PowerSet, VoltageSet and CurrentSet
 * Allow decimals as input to commands PowerSet, VoltageSet and CurrentSet
 * Add support for PCA9685 12bit 16pin hardware PWM driver (#3866)
2018-09-22 15:09:53 +02:00
Theo Arends f517755303 Prep for frequency display
Prep for energy frequency display and update xnrg_05_pzem2.ino with correct register values
2018-09-07 18:15:47 +02:00
Theo Arends 07dafe1631 6.2.0.2 - Energy monitoring
6.2.0.2 20180904
 * Rewrite energy monitoring using energy sensor driver modules
 * Fix lost today and total energy value after power cycle (#3689)
2018-09-04 16:22:34 +02:00