zocker007
af23a73648
add pulse rate measurement for counter meter
2022-03-02 01:27:18 +01:00
gemu2015
ecd8e2ed29
add sml write once cmd
2022-02-11 08:01:07 +01:00
gemu2015
8b7f18dcf4
allow word swap in modbus response
2022-02-08 17:15:41 +01:00
SteWers
a75b465385
[SML] Check for used GPIO
...
- Check for used GPIO
- more meaningful error messages
2022-01-24 20:18:07 +01:00
SteWers
03e4d65582
[SML] Serial activity monitor via LED
...
Visualize the activity of one or all serial meters via LED. It is helpful for debugging and also for viewing serial activity easily. The configuration is done via console commands:
- LED-GPIO for monitoring serial activity => sensor53 l2, l13, l15 ... or l255 for turn off (default)
- meter number for monitoring serial activity => sensor53 m1, m2, m3 ... or m0 for all (default)
To start at boot-time, add the entries in the boot-section (>B) of the script.
2022-01-20 20:19:50 +01:00
SteWers
0119bd1fb0
[SML] Remove colon at the end of the labels
...
Remove colon at the end of the labels on the WebUI to use the same format then all other sensors. Just a little cosmetics.
2022-01-15 19:29:31 +01:00
gemu2015
3845708acc
fix vbus signed word
2021-12-28 12:38:39 +01:00
gemu2015
94844b4707
software serial for eps32
2021-12-15 14:46:05 +01:00
gemu2015
6301b598f5
=d fix, trx list allow split lines
2021-12-08 16:30:11 +01:00
gemu2015
41639d46c2
fix sml compile error SML_MAX_VARS missing
2021-10-23 08:07:51 +02:00
gemu2015
db1036e8b9
fix sml obis
2021-09-22 16:40:52 +02:00
Theo Arends
0d9678eef6
Refactor trim
2021-08-16 11:11:46 +02:00
gemu2015
f6b527d189
fix =d mode
2021-07-19 09:55:43 +02:00
Theo Arends
5e805e0c4a
Move Settings from DRAM to heap
2021-06-11 18:14:12 +02:00
Theo Arends
ebeb4ea7ff
Remove AddLog_P in favour of AddLog
...
Remove AddLog_P in favour of AddLog switching log from stack to heap allowing longer log entries (up to approximate log buffer size)
2021-06-05 11:47:09 +02:00
Michael Voggenreiter
de12709ed6
Added electricity meter easymeter Q3C
2021-04-28 07:57:05 +02:00
Jason2866
9851c26781
Fix for #11680
...
Using file from https://github.com/arendst/Tasmota/issues/11680#issuecomment-818844390
2021-04-15 20:21:51 +02:00
Theo Arends
2350697815
Use IRAM_ATTR in place of ICACHE_RAM_ATTR
2021-04-02 17:14:08 +02:00
gemu2015
7bc7b83f18
better modbus serial config
2021-03-30 08:38:13 +02:00
gemu2015
8e5a9c11b7
fix sml 24 bit signed
2021-03-09 12:10:37 +01:00
gemu2015
56f922a7a7
dumpsize configurable, =m,=h mqtt fix,
2021-03-02 09:11:08 +01:00
Theo Arends
89d8fbb0ec
Change ARRAY_SIZE() to nitems()
2021-02-28 12:50:02 +01:00
gemu2015
ec330d70f8
fix sml calculate vars option (=m)
2021-02-28 09:01:13 +01:00
gemu2015
dc92fc6c61
serial dump recoded
2021-02-25 14:36:37 +01:00
gemu2015
9be1758f61
Update xsns_53_sml.ino
2021-02-24 10:20:03 +01:00
gemu2015
8b23b1a072
better vbus dump
2021-02-24 10:09:33 +01:00
gemu2015
16a30bd12e
support for vbus
2021-02-24 09:11:21 +01:00
gemu2015
ed7c06a6ed
sml several fixes
2021-02-22 11:10:49 +01:00
gemu2015
ca5ab2d094
send mqtt only on valid data
2021-02-20 17:32:01 +01:00
gemu2015
d29a9f4d55
better impl of ebus negative values
2021-02-11 08:47:48 +01:00
Sven Ebenfeld
f52cb12b77
xsns_53_sml: add option to emit ebus sync only telegrams
...
Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com>
2021-02-07 20:33:09 +01:00
Sven Ebenfeld
50adf2d003
sns_53_sml: make ebus correctly interpret signed values
...
Signed-off-by: Sven Ebenfeld <sven.ebenfeld@gmail.com>
2021-02-07 20:26:10 +01:00
Theo Arends
ac054ea666
Refactor AddLog usage
2021-01-23 17:10:06 +01:00
gemu2015
152aabdc8b
Update xsns_53_sml.ino
2021-01-22 08:33:42 +01:00
gemu2015
a545ec67d5
obis second () option
2021-01-22 08:31:22 +01:00
Theo Arends
7e62aa548d
Merge pull request #10341 from gemu2015/fixes
...
Fixes
2021-01-01 16:11:15 +01:00
Theo Arends
dcbb3f1e0e
Happy New Year
2021-01-01 13:44:04 +01:00
gemu2015
3ee92fb4ba
smaller log buffer
2021-01-01 06:44:04 +01:00
Jason2866
50506017c9
Fix compile error
2020-12-25 20:38:29 +01:00
Theo Arends
61c559e748
Prep removal of global log_data providing re-entry
2020-12-23 18:09:21 +01:00
Theo Arends
765e0e922d
Prep for ESP32-C3 ph3
2020-11-28 17:00:15 +01:00
gemu2015
8feffde365
sml add optional 2 modbus stop bits
2020-11-15 16:09:05 +01:00
TheChatty
53bcfd5ef8
SML: Clean code for NO_OP meter
...
Removing description for NO_OP meter saves about 80 bytes.
2020-11-14 00:35:21 +01:00
Theo Arends
fa7fdbd51a
Consolidate `AddLog_P`
...
Consolidate `AddLog_P` into `AddLog_P2` and rename to `AddLog_P`
2020-11-06 17:09:13 +01:00
gemu2015
975981fdbf
Update xsns_53_sml.ino
2020-11-02 12:36:57 +01:00
gemu2015
70258a28a6
sml update
...
hardcode descriptor default to no op
better counter debounce
2020-11-02 12:24:39 +01:00
Theo Arends
af5082320d
Use global struct
2020-10-30 12:29:48 +01:00
Theo Arends
e59bfc1d69
Use global struct
2020-10-29 13:58:50 +01:00
Theo Arends
280f0a9de7
Use global struct
2020-10-29 13:37:09 +01:00
gemu2015
b1cd64bebb
sml possible modbus buffer overflow
2020-08-09 09:36:24 +02:00