Class for handling detailed Electra A/C messages. More...

#include <ir_Electra.h>

Collaboration diagram for IRElectraAc:

Public Member Functions
	IRElectraAc (const uint16_t pin, const bool inverted=false, const bool use_modulation=true)
	Class constructor. More...

void	stateReset (void)
	Reset the internal state to a fixed known good state. More...

void	send (const uint16_t repeat=kElectraAcMinRepeat)
	Send the current internal state as an IR message. More...

int8_t	calibrate (void)
	Run the calibration to calculate uSec timing offsets for this platform. More...

void	begin (void)
	Set up hardware to be able to send a message. More...

void	on (void)
	Change the power setting to On. More...

void	off (void)
	Change the power setting to Off. More...

void	setPower (const bool on)
	Change the power setting. More...

bool	getPower (void)
	Get the value of the current power setting. More...

void	setMode (const uint8_t mode)
	Set the operating mode of the A/C. More...

uint8_t	getMode (void)
	Get the operating mode setting of the A/C. More...

void	setTemp (const uint8_t temp)
	Set the temperature. More...

uint8_t	getTemp (void)
	Get the current temperature setting. More...

void	setFan (const uint8_t speed)
	Set the speed of the fan. More...

uint8_t	getFan (void)
	Get the current fan speed setting. More...

void	setSwingV (const bool on)
	Set the Vertical Swing mode of the A/C. More...

bool	getSwingV (void)
	Get the Vertical Swing mode of the A/C. More...

void	setSwingH (const bool on)
	Set the Horizontal Swing mode of the A/C. More...

bool	getSwingH (void)
	Get the Horizontal Swing mode of the A/C. More...

void	setClean (const bool on)
	Set the Clean mode of the A/C. More...

bool	getClean (void)
	Get the Clean mode of the A/C. More...

void	setLightToggle (const bool on)
	Set the Light (LED) Toggle mode of the A/C. More...

bool	getLightToggle (void)
	Get the Light (LED) Toggle mode of the A/C. More...

void	setTurbo (const bool on)
	Set the Turbo mode of the A/C. More...

bool	getTurbo (void)
	Get the Turbo mode of the A/C. More...

uint8_t *	getRaw (void)
	Get a PTR to the internal state/code for this protocol. More...

void	setRaw (const uint8_t new_code[], const uint16_t length=kElectraAcStateLength)
	Set the internal state from a valid code for this protocol. More...

String	toString (void)
	Convert the current internal state into a human readable string. More...

uint8_t	convertMode (const stdAc::opmode_t mode)
	Convert a stdAc::opmode_t enum into its native mode. More...

uint8_t	convertFan (const stdAc::fanspeed_t speed)
	Convert a stdAc::fanspeed_t enum into it's native speed. More...

stdAc::state_t	toCommon (void)
	Convert the current internal state into its stdAc::state_t equivilant. More...

Static Public Member Functions
static bool	validChecksum (const uint8_t state[], const uint16_t length=kElectraAcStateLength)
	Verify the checksum is valid for a given state. More...

static uint8_t	calcChecksum (const uint8_t state[], const uint16_t length=kElectraAcStateLength)
	Calculate the checksum for a given state. More...

static stdAc::opmode_t	toCommonMode (const uint8_t mode)
	Convert a native mode into its stdAc equivilant. More...

static stdAc::fanspeed_t	toCommonFanSpeed (const uint8_t speed)
	Convert a native fan speed into its stdAc equivilant. More...

Private Member Functions
void	checksum (const uint16_t length=kElectraAcStateLength)
	Calculate and set the checksum values for the internal state. More...

Private Attributes
IRsend	_irsend
	instance of the IR send class More...

uint8_t	remote_state [kElectraAcStateLength]
	The state of the IR remote. More...

Detailed Description

Class for handling detailed Electra A/C messages.

Constructor & Destructor Documentation

◆ IRElectraAc()

IRElectraAc::IRElectraAc	(	const uint16_t	pin,
		const bool	inverted = `false`,
		const bool	use_modulation = `true`
	)

explicit

Class constructor.

Parameters

[in]	pin	GPIO to be used when sending.
[in]	inverted	Is the output signal to be inverted?
[in]	use_modulation	Is frequency modulation to be used?

Member Function Documentation

◆ begin()

void IRElectraAc::begin ( void )

Set up hardware to be able to send a message.

◆ calcChecksum()

uint8_t IRElectraAc::calcChecksum	(	const uint8_t	state[],
		const uint16_t	length = `kElectraAcStateLength`
	)

static

Calculate the checksum for a given state.

Parameters

[in]	state	The value to calc the checksum of.
[in]	length	The length of the state array.

Returns: The calculated checksum stored in a uint_8.

◆ calibrate()

int8_t IRElectraAc::calibrate ( void )

inline

Run the calibration to calculate uSec timing offsets for this platform.

Returns: The uSec timing offset needed per modulation of the IR Led.

Note: This will produce a 65ms IR signal pulse at 38kHz. Only ever needs to be run once per object instantiation, if at all.

◆ checksum()

void IRElectraAc::checksum ( const uint16_t length = kElectraAcStateLength )

private

Calculate and set the checksum values for the internal state.

Parameters

[in] length The length of the state array.

◆ convertFan()

uint8_t IRElectraAc::convertFan ( const stdAc::fanspeed_t speed )

Convert a stdAc::fanspeed_t enum into it's native speed.

Parameters

[in] speed The enum to be converted.

Returns: The native equivilant of the enum.

◆ convertMode()

uint8_t IRElectraAc::convertMode ( const stdAc::opmode_t mode )

Convert a stdAc::opmode_t enum into its native mode.

Parameters

[in] mode The enum to be converted.

Returns: The native equivilant of the enum.

◆ getClean()

bool IRElectraAc::getClean ( void )

Get the Clean mode of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getFan()

uint8_t IRElectraAc::getFan ( void )

Get the current fan speed setting.

Returns: The current fan speed.

◆ getLightToggle()

bool IRElectraAc::getLightToggle ( void )

Get the Light (LED) Toggle mode of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getMode()

uint8_t IRElectraAc::getMode ( void )

Get the operating mode setting of the A/C.

Returns: The current operating mode setting.

◆ getPower()

bool IRElectraAc::getPower ( void )

Get the value of the current power setting.

Returns: true, the setting is on. false, the setting is off.

◆ getRaw()

uint8_t * IRElectraAc::getRaw ( void )

Get a PTR to the internal state/code for this protocol.

Returns: PTR to a code for this protocol based on the current internal state.

◆ getSwingH()

bool IRElectraAc::getSwingH ( void )

Get the Horizontal Swing mode of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getSwingV()

bool IRElectraAc::getSwingV ( void )

Get the Vertical Swing mode of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getTemp()

uint8_t IRElectraAc::getTemp ( void )

Get the current temperature setting.

Returns: The current setting for temp. in degrees celsius.

◆ getTurbo()

bool IRElectraAc::getTurbo ( void )

Get the Turbo mode of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ off()

void IRElectraAc::off ( void )

Change the power setting to Off.

◆ on()

void IRElectraAc::on ( void )

Change the power setting to On.

◆ send()

void IRElectraAc::send ( const uint16_t repeat = kElectraAcMinRepeat )

Send the current internal state as an IR message.

Parameters

[in] repeat Nr. of times the message will be repeated.

◆ setClean()

void IRElectraAc::setClean ( const bool on )

Set the Clean mode of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setFan()

void IRElectraAc::setFan ( const uint8_t speed )

Set the speed of the fan.

Parameters

[in] speed The desired setting.

Note: 0 is auto, 1-3 is the speed

◆ setLightToggle()

void IRElectraAc::setLightToggle ( const bool on )

Set the Light (LED) Toggle mode of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setMode()

void IRElectraAc::setMode ( const uint8_t mode )

Set the operating mode of the A/C.

Parameters

[in] mode The desired operating mode.

◆ setPower()

void IRElectraAc::setPower ( const bool on )

Change the power setting.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setRaw()

void IRElectraAc::setRaw	(	const uint8_t	new_code[],
		const uint16_t	length = `kElectraAcStateLength`
	)

Set the internal state from a valid code for this protocol.

Parameters

[in]	new_code	A valid code for this protocol.
[in]	length	The length of the code array.

◆ setSwingH()

void IRElectraAc::setSwingH ( const bool on )

Set the Horizontal Swing mode of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setSwingV()

void IRElectraAc::setSwingV ( const bool on )

Set the Vertical Swing mode of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setTemp()

void IRElectraAc::setTemp ( const uint8_t temp )

Set the temperature.

Parameters

[in] temp The temperature in degrees celsius.

◆ setTurbo()

void IRElectraAc::setTurbo ( const bool on )

Set the Turbo mode of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ stateReset()

void IRElectraAc::stateReset ( void )

Reset the internal state to a fixed known good state.

◆ toCommon()

stdAc::state_t IRElectraAc::toCommon ( void )

Convert the current internal state into its stdAc::state_t equivilant.

Returns: The stdAc equivilant of the native settings.

◆ toCommonFanSpeed()

stdAc::fanspeed_t IRElectraAc::toCommonFanSpeed ( const uint8_t speed )

static

Convert a native fan speed into its stdAc equivilant.

Parameters

[in] speed The native setting to be converted.

Returns: The stdAc equivilant of the native setting.

◆ toCommonMode()

stdAc::opmode_t IRElectraAc::toCommonMode ( const uint8_t mode )

static

Convert a native mode into its stdAc equivilant.

Parameters

[in] mode The native setting to be converted.

Returns: The stdAc equivilant of the native setting.

◆ toString()

String IRElectraAc::toString ( void )

Convert the current internal state into a human readable string.

Returns: A human readable string.

◆ validChecksum()

bool IRElectraAc::validChecksum	(	const uint8_t	state[],
		const uint16_t	length = `kElectraAcStateLength`
	)

static

Verify the checksum is valid for a given state.

Parameters

[in]	state	The state to verify the checksum of.
[in]	length	The length of the state array.

Returns: true, if the state has a valid checksum. Otherwise, false.

Member Data Documentation

◆ _irsend

IRsend IRElectraAc::_irsend

private

instance of the IR send class

◆ remote_state

uint8_t IRElectraAc::remote_state[kElectraAcStateLength]

private

The state of the IR remote.

The documentation for this class was generated from the following files:

src/ir_Electra.h
src/ir_Electra.cpp

Public Member Functions

Static Public Member Functions

Private Member Functions

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ IRElectraAc()

Member Function Documentation

◆ begin()

◆ calcChecksum()

◆ calibrate()

◆ checksum()

◆ convertFan()

◆ convertMode()

◆ getClean()

◆ getFan()

◆ getLightToggle()

◆ getMode()

◆ getPower()

◆ getRaw()

◆ getSwingH()

◆ getSwingV()

◆ getTemp()

◆ getTurbo()

◆ off()

◆ on()

◆ send()

◆ setClean()

◆ setFan()

◆ setLightToggle()

◆ setMode()

◆ setPower()

◆ setRaw()

◆ setSwingH()

◆ setSwingV()

◆ setTemp()

◆ setTurbo()

◆ stateReset()

◆ toCommon()

◆ toCommonFanSpeed()

◆ toCommonMode()

◆ toString()

◆ validChecksum()

Member Data Documentation

◆ _irsend

◆ remote_state