Class for handling detailed Panasonic A/C messages. More...

#include <ir_Panasonic.h>

Collaboration diagram for IRPanasonicAc:

Public Member Functions
	IRPanasonicAc (const uint16_t pin, const bool inverted=false, const bool use_modulation=true)
	Class constructor. More...

void	stateReset (void)
	Reset the state of the remote to a known good state/sequence. More...

void	send (const uint16_t repeat=kPanasonicAcDefaultRepeat)
	Send the current internal state as an IR message. More...

int8_t	calibrate (void)
	Run the calibration to calculate uSec timing offsets for this platform. More...

void	begin (void)
	Set up hardware to be able to send a message. More...

void	on (void)
	Change the power setting to On. More...

void	off (void)
	Change the power setting to Off. More...

void	setPower (const bool on)
	Control the power state of the A/C unit. More...

bool	getPower (void)
	Get the A/C power state of the remote. More...

void	setTemp (const uint8_t temp, const bool remember=true)
	Set the temperature. More...

uint8_t	getTemp (void)
	Get the current temperature setting. More...

void	setFan (const uint8_t fan)
	Set the speed of the fan. More...

uint8_t	getFan (void)
	Get the current fan speed setting. More...

void	setMode (const uint8_t mode)
	Set the operating mode of the A/C. More...

uint8_t	getMode (void)
	Get the operating mode setting of the A/C. More...

void	setRaw (const uint8_t state[])
	Set the internal state from a valid code for this protocol. More...

uint8_t *	getRaw (void)
	Get a PTR to the internal state/code for this protocol. More...

void	setQuiet (const bool on)
	Set the Quiet setting of the A/C. More...

bool	getQuiet (void)
	Get the Quiet setting of the A/C. More...

void	setPowerful (const bool on)
	Set the Powerful (Turbo) setting of the A/C. More...

bool	getPowerful (void)
	Get the Powerful (Turbo) setting of the A/C. More...

void	setIon (const bool on)
	Set the Ion (filter) setting of the A/C. More...

bool	getIon (void)
	Get the Ion (filter) setting of the A/C. More...

void	setModel (const panasonic_ac_remote_model_t model)
	Set the model of the A/C to emulate. More...

panasonic_ac_remote_model_t	getModel (void)
	Get/Detect the model of the A/C. More...

void	setSwingVertical (const uint8_t elevation)
	Control the vertical swing setting. More...

uint8_t	getSwingVertical (void)
	Get the current vertical swing setting. More...

void	setSwingHorizontal (const uint8_t direction)
	Control the horizontal swing setting. More...

uint8_t	getSwingHorizontal (void)
	Get the current horizontal swing setting. More...

uint16_t	getClock (void)
	Get the current clock time value. More...

void	setClock (const uint16_t mins_since_midnight)
	Set the current clock time value. More...

uint16_t	getOnTimer (void)
	Get the On Timer time value. More...

void	setOnTimer (const uint16_t mins_since_midnight, const bool enable=true)
	Set/Enable the On Timer. More...

void	cancelOnTimer (void)
	Cancel the On Timer. More...

bool	isOnTimerEnabled (void)
	Check if the On Timer is Enabled. More...

uint16_t	getOffTimer (void)
	Get the Off Timer time value. More...

void	setOffTimer (const uint16_t mins_since_midnight, const bool enable=true)
	Set/Enable the Off Timer. More...

void	cancelOffTimer (void)
	Cancel the Off Timer. More...

bool	isOffTimerEnabled (void)
	Check if the Off Timer is Enabled. More...

stdAc::state_t	toCommon (void)
	Convert the current internal state into its stdAc::state_t equivilant. More...

String	toString (void)
	Convert the internal state into a human readable string. More...

Static Public Member Functions
static bool	validChecksum (const uint8_t *state, const uint16_t length=kPanasonicAcStateLength)
	Verify the checksum is valid for a given state. More...

static uint8_t	calcChecksum (const uint8_t *state, const uint16_t length=kPanasonicAcStateLength)
	Calculate the checksum for a given state. More...

static uint16_t	encodeTime (const uint8_t hours, const uint8_t mins)
	Convert standard (military/24hr) time to nr. of minutes since midnight. More...

static uint8_t	convertMode (const stdAc::opmode_t mode)
	Convert a stdAc::opmode_t enum into its native mode. More...

static uint8_t	convertFan (const stdAc::fanspeed_t speed)
	Convert a stdAc::fanspeed_t enum into it's native speed. More...

static uint8_t	convertSwingV (const stdAc::swingv_t position)
	Convert a standard A/C vertical swing into its native setting. More...

static uint8_t	convertSwingH (const stdAc::swingh_t position)
	Convert a standard A/C horizontal swing into its native setting. More...

static stdAc::opmode_t	toCommonMode (const uint8_t mode)
	Convert a native mode into its stdAc equivilant. More...

static stdAc::fanspeed_t	toCommonFanSpeed (const uint8_t speed)
	Convert a native fan speed into its stdAc equivilant. More...

static stdAc::swingv_t	toCommonSwingV (const uint8_t pos)
	Convert a native vertical swing postion to it's common equivalent. More...

static stdAc::swingh_t	toCommonSwingH (const uint8_t pos)
	Convert a native horizontal swing postion to it's common equivalent. More...

Private Member Functions
void	fixChecksum (const uint16_t length=kPanasonicAcStateLength)
	Calculate and set the checksum values for the internal state. More...

Static Private Member Functions
static uint16_t	_getTime (const uint8_t ptr[])
	Get the time from a given pointer location. More...

static void	_setTime (uint8_t *const ptr, const uint16_t mins_since_midnight, const bool round_down)
	Set the time at a given pointer location. More...

Private Attributes
IRsend	_irsend
	Instance of the IR send class. More...

uint8_t	remote_state [kPanasonicAcStateLength]
	The state in code form. More...

uint8_t	_swingh

uint8_t	_temp

Detailed Description

Class for handling detailed Panasonic A/C messages.

Constructor & Destructor Documentation

◆ IRPanasonicAc()

IRPanasonicAc::IRPanasonicAc	(	const uint16_t	pin,
		const bool	inverted = `false`,
		const bool	use_modulation = `true`
	)

explicit

Class constructor.

Parameters

[in]	pin	GPIO to be used when sending.
[in]	inverted	Is the output signal to be inverted?
[in]	use_modulation	Is frequency modulation to be used?

Member Function Documentation

◆ _getTime()

uint16_t IRPanasonicAc::_getTime ( const uint8_t ptr[] )

staticprivate

Get the time from a given pointer location.

Parameters

[in] ptr A pointer to a time location in a state.

Returns: The time expressed as nr. of minutes past midnight.

Note: Internal use only.

◆ _setTime()

void IRPanasonicAc::_setTime	(	uint8_t *const	ptr,
		const uint16_t	mins_since_midnight,
		const bool	round_down
	)

staticprivate

Set the time at a given pointer location.

Parameters

[in,out]	ptr	A pointer to a time location in a state.
[in]	mins_since_midnight	The time as nr. of minutes past midnight.
[in]	round_down	Do we round to the nearest 10 minute mark?

Note: Internal use only.

◆ begin()

void IRPanasonicAc::begin ( void )

Set up hardware to be able to send a message.

◆ calcChecksum()

uint8_t IRPanasonicAc::calcChecksum	(	const uint8_t *	state,
		const uint16_t	length = `kPanasonicAcStateLength`
	)

static

Calculate the checksum for a given state.

Parameters

[in]	state	The value to calc the checksum of.
[in]	length	The size/length of the state.

Returns: The calculated checksum value.

◆ calibrate()

int8_t IRPanasonicAc::calibrate ( void )

inline

Run the calibration to calculate uSec timing offsets for this platform.

Returns: The uSec timing offset needed per modulation of the IR Led.

Note: This will produce a 65ms IR signal pulse at 38kHz. Only ever needs to be run once per object instantiation, if at all.

◆ cancelOffTimer()

void IRPanasonicAc::cancelOffTimer ( void )

Cancel the Off Timer.

◆ cancelOnTimer()

void IRPanasonicAc::cancelOnTimer ( void )

Cancel the On Timer.

◆ convertFan()

uint8_t IRPanasonicAc::convertFan ( const stdAc::fanspeed_t speed )

static

Convert a stdAc::fanspeed_t enum into it's native speed.

Parameters

[in] speed The enum to be converted.

Returns: The native equivilant of the enum.

◆ convertMode()

uint8_t IRPanasonicAc::convertMode ( const stdAc::opmode_t mode )

static

Convert a stdAc::opmode_t enum into its native mode.

Parameters

[in] mode The enum to be converted.

Returns: The native equivilant of the enum.

◆ convertSwingH()

uint8_t IRPanasonicAc::convertSwingH ( const stdAc::swingh_t position )

static

Convert a standard A/C horizontal swing into its native setting.

Parameters

[in] position A stdAc::swingh_t position to convert.

Returns: The equivilent native horizontal swing position.

◆ convertSwingV()

uint8_t IRPanasonicAc::convertSwingV ( const stdAc::swingv_t position )

static

Convert a standard A/C vertical swing into its native setting.

Parameters

[in] position A stdAc::swingv_t position to convert.

Returns: The equivilent native horizontal swing position.

◆ encodeTime()

uint16_t IRPanasonicAc::encodeTime	(	const uint8_t	hours,
		const uint8_t	mins
	)

static

Convert standard (military/24hr) time to nr. of minutes since midnight.

Parameters

[in]	hours	The hours component of the time.
[in]	mins	The minutes component of the time.

Returns: The nr of minutes since midnight.

◆ fixChecksum()

void IRPanasonicAc::fixChecksum ( const uint16_t length = kPanasonicAcStateLength )

private

Calculate and set the checksum values for the internal state.

Parameters

[in] length The size/length of the state.

◆ getClock()

uint16_t IRPanasonicAc::getClock ( void )

Get the current clock time value.

Returns: The time expressed as nr. of minutes past midnight.

◆ getFan()

uint8_t IRPanasonicAc::getFan ( void )

Get the current fan speed setting.

Returns: The current fan speed.

◆ getIon()

bool IRPanasonicAc::getIon ( void )

Get the Ion (filter) setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getMode()

uint8_t IRPanasonicAc::getMode ( void )

Get the operating mode setting of the A/C.

Returns: The current operating mode setting.

◆ getModel()

panasonic_ac_remote_model_t IRPanasonicAc::getModel ( void )

Get/Detect the model of the A/C.

Returns: The enum of the compatible model.

◆ getOffTimer()

uint16_t IRPanasonicAc::getOffTimer ( void )

Get the Off Timer time value.

Returns: The time expressed as nr. of minutes past midnight.

◆ getOnTimer()

uint16_t IRPanasonicAc::getOnTimer ( void )

Get the On Timer time value.

Returns: The time expressed as nr. of minutes past midnight.

◆ getPower()

bool IRPanasonicAc::getPower ( void )

Get the A/C power state of the remote.

Returns: true, the setting is on. false, the setting is off.

Warning: Except for CKP models, where it returns if the power state will be toggled on the A/C unit when the next message is sent.

◆ getPowerful()

bool IRPanasonicAc::getPowerful ( void )

Get the Powerful (Turbo) setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getQuiet()

bool IRPanasonicAc::getQuiet ( void )

Get the Quiet setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getRaw()

uint8_t * IRPanasonicAc::getRaw ( void )

Get a PTR to the internal state/code for this protocol.

Returns: PTR to a code for this protocol based on the current internal state.

◆ getSwingHorizontal()

uint8_t IRPanasonicAc::getSwingHorizontal ( void )

Get the current horizontal swing setting.

Returns: The current position it is set to.

◆ getSwingVertical()

uint8_t IRPanasonicAc::getSwingVertical ( void )

Get the current vertical swing setting.

Returns: The current position it is set to.

◆ getTemp()

uint8_t IRPanasonicAc::getTemp ( void )

Get the current temperature setting.

Returns: The current setting for temp. in degrees celsius.

◆ isOffTimerEnabled()

bool IRPanasonicAc::isOffTimerEnabled ( void )

Check if the Off Timer is Enabled.

Returns: true, the setting is on. false, the setting is off.

◆ isOnTimerEnabled()

bool IRPanasonicAc::isOnTimerEnabled ( void )

Check if the On Timer is Enabled.

Returns: true, the setting is on. false, the setting is off.

◆ off()

void IRPanasonicAc::off ( void )

Change the power setting to Off.

◆ on()

void IRPanasonicAc::on ( void )

Change the power setting to On.

◆ send()

void IRPanasonicAc::send ( const uint16_t repeat = kPanasonicAcDefaultRepeat )

Send the current internal state as an IR message.

Parameters

[in] repeat Nr. of times the message will be repeated.

◆ setClock()

void IRPanasonicAc::setClock ( const uint16_t mins_since_midnight )

Set the current clock time value.

Parameters

[in] mins_since_midnight The time as nr. of minutes past midnight.

◆ setFan()

void IRPanasonicAc::setFan ( const uint8_t speed )

Set the speed of the fan.

Parameters

[in] speed The desired setting.

◆ setIon()

void IRPanasonicAc::setIon ( const bool on )

Set the Ion (filter) setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setMode()

void IRPanasonicAc::setMode ( const uint8_t desired )

Set the operating mode of the A/C.

Parameters

[in] desired The desired operating mode.

◆ setModel()

void IRPanasonicAc::setModel ( const panasonic_ac_remote_model_t model )

Set the model of the A/C to emulate.

Parameters

[in] model The enum of the appropriate model.

◆ setOffTimer()

void IRPanasonicAc::setOffTimer	(	const uint16_t	mins_since_midnight,
		const bool	enable = `true`
	)

Set/Enable the Off Timer.

Parameters

[in]	mins_since_midnight	The time as nr. of minutes past midnight.
[in]	enable	Do we enable the timer or not?

◆ setOnTimer()

void IRPanasonicAc::setOnTimer	(	const uint16_t	mins_since_midnight,
		const bool	enable = `true`
	)

Set/Enable the On Timer.

Parameters

[in]	mins_since_midnight	The time as nr. of minutes past midnight.
[in]	enable	Do we enable the timer or not?

◆ setPower()

void IRPanasonicAc::setPower ( const bool on )

Control the power state of the A/C unit.

Parameters

[in] on true, the setting is on. false, the setting is off.

Warning: For CKP models, the remote has no memory of the power state the A/C unit should be in. For those models setting this on/true will toggle the power state of the Panasonic A/C unit with the next meessage. e.g. If the A/C unit is already on, setPower(true) will turn it off. If the A/C unit is already off, setPower(true) will turn it on. setPower(false) will leave the A/C power state as it was. For all other models, setPower(true) should set the internal state to turn it on, and setPower(false) should turn it off.

◆ setPowerful()

void IRPanasonicAc::setPowerful ( const bool on )

Set the Powerful (Turbo) setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setQuiet()

void IRPanasonicAc::setQuiet ( const bool on )

Set the Quiet setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setRaw()

void IRPanasonicAc::setRaw ( const uint8_t state[] )

Set the internal state from a valid code for this protocol.

Parameters

[in] state A valid code for this protocol.

◆ setSwingHorizontal()

void IRPanasonicAc::setSwingHorizontal ( const uint8_t desired_direction )

Control the horizontal swing setting.

Parameters

[in] desired_direction The position to set the horizontal swing to.

◆ setSwingVertical()

void IRPanasonicAc::setSwingVertical ( const uint8_t desired_elevation )

Control the vertical swing setting.

Parameters

[in] desired_elevation The position to set the vertical swing to.

◆ setTemp()

void IRPanasonicAc::setTemp	(	const uint8_t	celsius,
		const bool	remember = `true`
	)

Set the temperature.

Parameters

[in]	celsius	The temperature in degrees celsius.
[in]	remember	A flag for the class to remember the temperature.

Note: Automatically safely limits the temp to the operating range supported.

◆ stateReset()

void IRPanasonicAc::stateReset ( void )

Reset the state of the remote to a known good state/sequence.

◆ toCommon()

stdAc::state_t IRPanasonicAc::toCommon ( void )

Convert the current internal state into its stdAc::state_t equivilant.

Returns: The stdAc equivilant of the native settings.

◆ toCommonFanSpeed()

stdAc::fanspeed_t IRPanasonicAc::toCommonFanSpeed ( const uint8_t spd )

static

Convert a native fan speed into its stdAc equivilant.

Parameters

[in] spd The native setting to be converted.

Returns: The stdAc equivilant of the native setting.

◆ toCommonMode()

stdAc::opmode_t IRPanasonicAc::toCommonMode ( const uint8_t mode )

static

Convert a native mode into its stdAc equivilant.

Parameters

[in] mode The native setting to be converted.

Returns: The stdAc equivilant of the native setting.

◆ toCommonSwingH()

stdAc::swingh_t IRPanasonicAc::toCommonSwingH ( const uint8_t pos )

static

Convert a native horizontal swing postion to it's common equivalent.

Parameters

[in] pos A native position to convert.

Returns: The common horizontal swing position.

◆ toCommonSwingV()

stdAc::swingv_t IRPanasonicAc::toCommonSwingV ( const uint8_t pos )

static

Convert a native vertical swing postion to it's common equivalent.

Parameters

[in] pos A native position to convert.

Returns: The common vertical swing position.

◆ toString()

String IRPanasonicAc::toString ( void )

Convert the internal state into a human readable string.

Returns: A string containing the settings in human-readable form.

◆ validChecksum()

bool IRPanasonicAc::validChecksum	(	const uint8_t *	state,
		const uint16_t	length = `kPanasonicAcStateLength`
	)

static

Verify the checksum is valid for a given state.

Parameters

[in]	state	The array to verify the checksum of.
[in]	length	The length of the state array.

Returns: true, if the state has a valid checksum. Otherwise, false.

Member Data Documentation

◆ _irsend

IRsend IRPanasonicAc::_irsend

private

Instance of the IR send class.

◆ _swingh

uint8_t IRPanasonicAc::_swingh

private

◆ _temp

uint8_t IRPanasonicAc::_temp

private

◆ remote_state

uint8_t IRPanasonicAc::remote_state[kPanasonicAcStateLength]

private

The state in code form.

The documentation for this class was generated from the following files:

src/ir_Panasonic.h
src/ir_Panasonic.cpp

Public Member Functions

Static Public Member Functions

Private Member Functions

Static Private Member Functions

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ IRPanasonicAc()

Member Function Documentation

◆ _getTime()

◆ _setTime()

◆ begin()

◆ calcChecksum()

◆ calibrate()

◆ cancelOffTimer()

◆ cancelOnTimer()

◆ convertFan()

◆ convertMode()

◆ convertSwingH()

◆ convertSwingV()

◆ encodeTime()

◆ fixChecksum()

◆ getClock()

◆ getFan()

◆ getIon()

◆ getMode()

◆ getModel()

◆ getOffTimer()

◆ getOnTimer()

◆ getPower()

◆ getPowerful()

◆ getQuiet()

◆ getRaw()

◆ getSwingHorizontal()

◆ getSwingVertical()

◆ getTemp()

◆ isOffTimerEnabled()

◆ isOnTimerEnabled()

◆ off()

◆ on()

◆ send()

◆ setClock()

◆ setFan()

◆ setIon()

◆ setMode()

◆ setModel()

◆ setOffTimer()

◆ setOnTimer()

◆ setPower()

◆ setPowerful()

◆ setQuiet()

◆ setRaw()

◆ setSwingHorizontal()

◆ setSwingVertical()

◆ setTemp()

◆ stateReset()

◆ toCommon()

◆ toCommonFanSpeed()

◆ toCommonMode()

◆ toCommonSwingH()

◆ toCommonSwingV()

◆ toString()

◆ validChecksum()

Member Data Documentation

◆ _irsend

◆ _swingh

◆ _temp

◆ remote_state