Class for handling detailed Teco A/C messages. More...

#include <ir_Teco.h>

Collaboration diagram for IRTecoAc:

Public Member Functions
	IRTecoAc (const uint16_t pin, const bool inverted=false, const bool use_modulation=true)
	Class constructor. More...

void	stateReset (void)
	Reset the internal state of the emulation. More...

void	send (const uint16_t repeat=kTecoDefaultRepeat)
	Send the current internal state as an IR message. More...

int8_t	calibrate (void)
	Run the calibration to calculate uSec timing offsets for this platform. More...

void	begin (void)
	Set up hardware to be able to send a message. More...

void	on (void)
	Set the requested power state of the A/C to on. More...

void	off (void)
	Set the requested power state of the A/C to off. More...

void	setPower (const bool on)
	Change the power setting. More...

bool	getPower (void)
	Get the value of the current power setting. More...

void	setTemp (const uint8_t temp)
	Set the temperature. More...

uint8_t	getTemp (void)
	Get the current temperature setting. More...

void	setFan (const uint8_t fan)
	Set the speed of the fan. More...

uint8_t	getFan (void)
	Get the current fan speed setting. More...

void	setMode (const uint8_t mode)
	Set the operating mode of the A/C. More...

uint8_t	getMode (void)
	Get the operating mode setting of the A/C. More...

void	setSwing (const bool on)
	Set the (vertical) swing setting of the A/C. More...

bool	getSwing (void)
	Get the (vertical) swing setting of the A/C. More...

void	setSleep (const bool on)
	Set the Sleep setting of the A/C. More...

bool	getSleep (void)
	Get the Sleep setting of the A/C. More...

void	setLight (const bool on)
	Set the Light (LED/Display) setting of the A/C. More...

bool	getLight (void)
	Get the Light (LED/Display) setting of the A/C. More...

void	setHumid (const bool on)
	Set the Humid setting of the A/C. More...

bool	getHumid (void)
	Get the Humid setting of the A/C. More...

void	setSave (const bool on)
	Set the Save setting of the A/C. More...

bool	getSave (void)
	Get the Save setting of the A/C. More...

uint16_t	getTimer (void)
	Get the timer time for when the A/C unit will switch power state. More...

void	setTimer (const uint16_t mins)
	Set the timer for when the A/C unit will switch power state. More...

uint64_t	getRaw (void)
	Get a copy of the internal state/code for this protocol. More...

void	setRaw (const uint64_t new_code)
	Set the internal state from a valid code for this protocol. More...

uint8_t	convertMode (const stdAc::opmode_t mode)
	Convert a stdAc::opmode_t enum into its native mode. More...

uint8_t	convertFan (const stdAc::fanspeed_t speed)
	Convert a stdAc::fanspeed_t enum into it's native speed. More...

stdAc::state_t	toCommon (void)
	Convert the current internal state into its stdAc::state_t equivilant. More...

String	toString (void)
	Convert the current internal state into a human readable string. More...

Static Public Member Functions
static stdAc::opmode_t	toCommonMode (const uint8_t mode)
	Convert a native mode into its stdAc equivilant. More...

static stdAc::fanspeed_t	toCommonFanSpeed (const uint8_t speed)
	Convert a native fan speed into its stdAc equivilant. More...

Private Member Functions
bool	getTimerEnabled (void)
	Is the timer function enabled? More...

Private Attributes
IRsend	_irsend
	Instance of the IR send class. More...

uint64_t	remote_state
	The state of the IR remote in IR code form. More...

Detailed Description

Class for handling detailed Teco A/C messages.

Constructor & Destructor Documentation

◆ IRTecoAc()

IRTecoAc::IRTecoAc	(	const uint16_t	pin,
		const bool	inverted = `false`,
		const bool	use_modulation = `true`
	)

explicit

Class constructor.

Parameters

[in]	pin	GPIO to be used when sending.
[in]	inverted	Is the output signal to be inverted?
[in]	use_modulation	Is frequency modulation to be used?

Member Function Documentation

◆ begin()

void IRTecoAc::begin ( void )

Set up hardware to be able to send a message.

◆ calibrate()

int8_t IRTecoAc::calibrate ( void )

inline

Run the calibration to calculate uSec timing offsets for this platform.

Returns: The uSec timing offset needed per modulation of the IR Led.

Note: This will produce a 65ms IR signal pulse at 38kHz. Only ever needs to be run once per object instantiation, if at all.

◆ convertFan()

uint8_t IRTecoAc::convertFan ( const stdAc::fanspeed_t speed )

Convert a stdAc::fanspeed_t enum into it's native speed.

Parameters

[in] speed The enum to be converted.

Returns: The native equivilant of the enum.

◆ convertMode()

uint8_t IRTecoAc::convertMode ( const stdAc::opmode_t mode )

Convert a stdAc::opmode_t enum into its native mode.

Parameters

[in] mode The enum to be converted.

Returns: The native equivilant of the enum.

◆ getFan()

uint8_t IRTecoAc::getFan ( void )

Get the current fan speed setting.

Returns: The current fan speed/mode.

◆ getHumid()

bool IRTecoAc::getHumid ( void )

Get the Humid setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getLight()

bool IRTecoAc::getLight ( void )

Get the Light (LED/Display) setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getMode()

uint8_t IRTecoAc::getMode ( void )

Get the operating mode setting of the A/C.

Returns: The current operating mode setting.

◆ getPower()

bool IRTecoAc::getPower ( void )

Get the value of the current power setting.

Returns: true, the setting is on. false, the setting is off.

◆ getRaw()

uint64_t IRTecoAc::getRaw ( void )

Get a copy of the internal state/code for this protocol.

Returns: A code for this protocol based on the current internal state.

◆ getSave()

bool IRTecoAc::getSave ( void )

Get the Save setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getSleep()

bool IRTecoAc::getSleep ( void )

Get the Sleep setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getSwing()

bool IRTecoAc::getSwing ( void )

Get the (vertical) swing setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getTemp()

uint8_t IRTecoAc::getTemp ( void )

Get the current temperature setting.

Returns: The current setting for temp. in degrees celsius.

◆ getTimer()

uint16_t IRTecoAc::getTimer ( void )

Get the timer time for when the A/C unit will switch power state.

Returns: The number of minutes left on the timer. 0 means off.

◆ getTimerEnabled()

bool IRTecoAc::getTimerEnabled ( void )

private

Is the timer function enabled?

Returns: true, the setting is on. false, the setting is off.

◆ off()

void IRTecoAc::off ( void )

Set the requested power state of the A/C to off.

◆ on()

void IRTecoAc::on ( void )

Set the requested power state of the A/C to on.

◆ send()

void IRTecoAc::send ( const uint16_t repeat = kTecoDefaultRepeat )

Send the current internal state as an IR message.

Parameters

[in] repeat Nr. of times the message will be repeated.

◆ setFan()

void IRTecoAc::setFan ( const uint8_t speed )

Set the speed of the fan.

Parameters

[in] speed The desired setting.

◆ setHumid()

void IRTecoAc::setHumid ( const bool on )

Set the Humid setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setLight()

void IRTecoAc::setLight ( const bool on )

Set the Light (LED/Display) setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setMode()

void IRTecoAc::setMode ( const uint8_t mode )

Set the operating mode of the A/C.

Parameters

[in] mode The desired operating mode.

◆ setPower()

void IRTecoAc::setPower ( const bool on )

Change the power setting.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setRaw()

void IRTecoAc::setRaw ( const uint64_t new_code )

Set the internal state from a valid code for this protocol.

Parameters

[in] new_code A valid code for this protocol.

◆ setSave()

void IRTecoAc::setSave ( const bool on )

Set the Save setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setSleep()

void IRTecoAc::setSleep ( const bool on )

Set the Sleep setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setSwing()

void IRTecoAc::setSwing ( const bool on )

Set the (vertical) swing setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setTemp()

void IRTecoAc::setTemp ( const uint8_t temp )

Set the temperature.

Parameters

[in] temp The temperature in degrees celsius.

◆ setTimer()

void IRTecoAc::setTimer ( const uint16_t nr_mins )

Set the timer for when the A/C unit will switch power state.

Parameters

[in] nr_mins Number of minutes before power state change. 0 will clear the timer. Max is 24 hrs.

Note: Time is stored internaly in increments of 30 mins.

◆ stateReset()

void IRTecoAc::stateReset ( void )

Reset the internal state of the emulation.

Note: Mode:auto, Power:Off, fan:auto, temp:16, swing:off, sleep:off

◆ toCommon()

stdAc::state_t IRTecoAc::toCommon ( void )

Convert the current internal state into its stdAc::state_t equivilant.

Returns: The stdAc equivilant of the native settings.

◆ toCommonFanSpeed()

stdAc::fanspeed_t IRTecoAc::toCommonFanSpeed ( const uint8_t speed )

static

Convert a native fan speed into its stdAc equivilant.

Parameters

[in] speed The native setting to be converted.

Returns: The stdAc equivilant of the native setting.

◆ toCommonMode()

stdAc::opmode_t IRTecoAc::toCommonMode ( const uint8_t mode )

static

Convert a native mode into its stdAc equivilant.

Parameters

[in] mode The native setting to be converted.

Returns: The stdAc equivilant of the native setting.

◆ toString()

String IRTecoAc::toString ( void )

Convert the current internal state into a human readable string.

Returns: A human readable string.

Member Data Documentation

◆ _irsend

IRsend IRTecoAc::_irsend

private

Instance of the IR send class.

◆ remote_state

uint64_t IRTecoAc::remote_state

private

The state of the IR remote in IR code form.

The documentation for this class was generated from the following files:

src/ir_Teco.h
src/ir_Teco.cpp

Public Member Functions

Static Public Member Functions

Private Member Functions

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ IRTecoAc()

Member Function Documentation

◆ begin()

◆ calibrate()

◆ convertFan()

◆ convertMode()

◆ getFan()

◆ getHumid()

◆ getLight()

◆ getMode()

◆ getPower()

◆ getRaw()

◆ getSave()

◆ getSleep()

◆ getSwing()

◆ getTemp()

◆ getTimer()

◆ getTimerEnabled()

◆ off()

◆ on()

◆ send()

◆ setFan()

◆ setHumid()

◆ setLight()

◆ setMode()

◆ setPower()

◆ setRaw()

◆ setSave()

◆ setSleep()

◆ setSwing()

◆ setTemp()

◆ setTimer()

◆ stateReset()

◆ toCommon()

◆ toCommonFanSpeed()

◆ toCommonMode()

◆ toString()

Member Data Documentation

◆ _irsend

◆ remote_state