Class for handling detailed Delonghi A/C messages. More...

#include <ir_Delonghi.h>

Collaboration diagram for IRDelonghiAc:

Public Member Functions
	IRDelonghiAc (const uint16_t pin, const bool inverted=false, const bool use_modulation=true)
	Class constructor. More...

void	stateReset (void)
	Reset the internal state to a fixed known good state. More...

void	send (const uint16_t repeat=kDelonghiAcDefaultRepeat)
	Send the current internal state as an IR message. More...

int8_t	calibrate (void)
	Run the calibration to calculate uSec timing offsets for this platform. More...

void	begin (void)
	Set up hardware to be able to send a message. More...

void	setPower (const bool on)
	Change the power setting. More...

bool	getPower (void) const
	Get the value of the current power setting. More...

void	on (void)
	Change the power setting to On. More...

void	off (void)
	Change the power setting to Off. More...

void	setTempUnit (const bool celsius)
	Change the temperature scale units. More...

bool	getTempUnit (void) const
	Get the temperature scale unit of measure currently in use. More...

void	setTemp (const uint8_t temp, const bool fahrenheit=false, const bool force=false)
	Set the temperature. More...

uint8_t	getTemp (void) const
	Get the current temperature setting. More...

void	setFan (const uint8_t speed)
	Set the speed of the fan. More...

uint8_t	getFan (void) const
	Get the current native fan speed setting. More...

void	setMode (const uint8_t mode)
	Set the operating mode of the A/C. More...

uint8_t	getMode (void) const
	Get the operating mode setting of the A/C. More...

void	setBoost (const bool on)
	Set the Boost (Turbo) mode of the A/C. More...

bool	getBoost (void) const
	Get the Boost (Turbo) mode of the A/C. More...

void	setSleep (const bool on)
	Set the Sleep mode of the A/C. More...

bool	getSleep (void) const
	Get the Sleep mode status of the A/C. More...

void	setOnTimerEnabled (const bool on)
	Set the enable status of the On Timer. More...

bool	getOnTimerEnabled (void) const
	Get the enable status of the On Timer. More...

void	setOnTimer (const uint16_t nr_of_mins)
	Set the On timer to activate in nr of minutes. More...

uint16_t	getOnTimer (void) const
	Get the On timer time. More...

void	setOffTimerEnabled (const bool on)
	Set the enable status of the Off Timer. More...

bool	getOffTimerEnabled (void) const
	Get the enable status of the Off Timer. More...

void	setOffTimer (const uint16_t nr_of_mins)
	Set the Off timer to activate in nr of minutes. More...

uint16_t	getOffTimer (void) const
	Get the Off timer time. More...

uint64_t	getRaw (void)
	Get a copy of the internal state as a valid code for this protocol. More...

void	setRaw (const uint64_t state)
	Set the internal state from a valid code for this protocol. More...

stdAc::state_t	toCommon (void) const
	Convert the current internal state into its stdAc::state_t equivilant. More...

String	toString (void) const
	Convert the current internal state into a human readable string. More...

Static Public Member Functions
static uint8_t	calcChecksum (const uint64_t state)
	Calculate the checksum for a given state. More...

static bool	validChecksum (const uint64_t state)
	Verify the checksum is valid for a given state. More...

static uint8_t	convertMode (const stdAc::opmode_t mode)
	Convert a stdAc::opmode_t enum into its native mode. More...

static uint8_t	convertFan (const stdAc::fanspeed_t speed)
	Convert a stdAc::fanspeed_t enum into it's native speed. More...

static stdAc::opmode_t	toCommonMode (const uint8_t mode)
	Convert a native mode into its stdAc equivilant. More...

static stdAc::fanspeed_t	toCommonFanSpeed (const uint8_t speed)
	Convert a native fan speed into its stdAc equivilant. More...

Private Member Functions
void	checksum (void)
	Calculate and set the checksum values for the internal state. More...

Private Attributes
IRsend	_irsend
	instance of the IR send class More...

DelonghiProtocol	_

uint8_t	_saved_temp
	The previously user requested temp value. More...

uint8_t	_saved_temp_units
	The previously user requested temp units. More...

Detailed Description

Class for handling detailed Delonghi A/C messages.

Constructor & Destructor Documentation

◆ IRDelonghiAc()

IRDelonghiAc::IRDelonghiAc	(	const uint16_t	pin,
		const bool	inverted = `false`,
		const bool	use_modulation = `true`
	)

explicit

Class constructor.

Parameters

[in]	pin	GPIO to be used when sending.
[in]	inverted	Is the output signal to be inverted?
[in]	use_modulation	Is frequency modulation to be used?

Member Function Documentation

◆ begin()

void IRDelonghiAc::begin ( void )

Set up hardware to be able to send a message.

◆ calcChecksum()

uint8_t IRDelonghiAc::calcChecksum ( const uint64_t state )

static

Calculate the checksum for a given state.

Parameters

[in] state The value to calc the checksum of.

Returns: A valid checksum value.

◆ calibrate()

int8_t IRDelonghiAc::calibrate ( void )

inline

Run the calibration to calculate uSec timing offsets for this platform.

Returns: The uSec timing offset needed per modulation of the IR Led.

Note: This will produce a 65ms IR signal pulse at 38kHz. Only ever needs to be run once per object instantiation, if at all.

◆ checksum()

void IRDelonghiAc::checksum ( void )

private

Calculate and set the checksum values for the internal state.

◆ convertFan()

uint8_t IRDelonghiAc::convertFan ( const stdAc::fanspeed_t speed )

static

Convert a stdAc::fanspeed_t enum into it's native speed.

Parameters

[in] speed The enum to be converted.

Returns: The native equivilant of the enum.

◆ convertMode()

uint8_t IRDelonghiAc::convertMode ( const stdAc::opmode_t mode )

static

Convert a stdAc::opmode_t enum into its native mode.

Parameters

[in] mode The enum to be converted.

Returns: The native equivilant of the enum.

◆ getBoost()

bool IRDelonghiAc::getBoost ( void ) const

Get the Boost (Turbo) mode of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getFan()

uint8_t IRDelonghiAc::getFan ( void ) const

Get the current native fan speed setting.

Returns: The current fan speed.

◆ getMode()

uint8_t IRDelonghiAc::getMode ( void ) const

Get the operating mode setting of the A/C.

Returns: The current operating mode setting.

◆ getOffTimer()

uint16_t IRDelonghiAc::getOffTimer ( void ) const

Get the Off timer time.

Returns: Total nr of mins before the device turns off.

◆ getOffTimerEnabled()

bool IRDelonghiAc::getOffTimerEnabled ( void ) const

Get the enable status of the Off Timer.

Returns: true, the setting is on. false, the setting is off.

◆ getOnTimer()

uint16_t IRDelonghiAc::getOnTimer ( void ) const

Get the On timer time.

Returns: Total nr of mins before the device turns on.

◆ getOnTimerEnabled()

bool IRDelonghiAc::getOnTimerEnabled ( void ) const

Get the enable status of the On Timer.

Returns: true, the setting is on. false, the setting is off.

◆ getPower()

bool IRDelonghiAc::getPower ( void ) const

Get the value of the current power setting.

Returns: true, the setting is on. false, the setting is off.

◆ getRaw()

uint64_t IRDelonghiAc::getRaw ( void )

Get a copy of the internal state as a valid code for this protocol.

Returns: A valid code for this protocol based on the current internal state.

◆ getSleep()

bool IRDelonghiAc::getSleep ( void ) const

Get the Sleep mode status of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getTemp()

uint8_t IRDelonghiAc::getTemp ( void ) const

Get the current temperature setting.

Returns: The current setting for temp. in currently configured units/scale.

◆ getTempUnit()

bool IRDelonghiAc::getTempUnit ( void ) const

Get the temperature scale unit of measure currently in use.

Returns: true, is Fahrenheit. false, is Celsius.

◆ off()

void IRDelonghiAc::off ( void )

Change the power setting to Off.

◆ on()

void IRDelonghiAc::on ( void )

Change the power setting to On.

◆ send()

void IRDelonghiAc::send ( const uint16_t repeat = kDelonghiAcDefaultRepeat )

Send the current internal state as an IR message.

Parameters

[in] repeat Nr. of times the message will be repeated.

◆ setBoost()

void IRDelonghiAc::setBoost ( const bool on )

Set the Boost (Turbo) mode of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setFan()

void IRDelonghiAc::setFan ( const uint8_t speed )

Set the speed of the fan.

Parameters

[in] speed The desired native setting.

◆ setMode()

void IRDelonghiAc::setMode ( const uint8_t mode )

Set the operating mode of the A/C.

Parameters

[in] mode The desired native operating mode.

◆ setOffTimer()

void IRDelonghiAc::setOffTimer ( const uint16_t nr_of_mins )

Set the Off timer to activate in nr of minutes.

Parameters

[in] nr_of_mins Total nr of mins to wait before turning off the device

Note: Max 23 hrs and 59 minutes. i.e. 1439 mins.

◆ setOffTimerEnabled()

void IRDelonghiAc::setOffTimerEnabled ( const bool on )

Set the enable status of the Off Timer.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setOnTimer()

void IRDelonghiAc::setOnTimer ( const uint16_t nr_of_mins )

Set the On timer to activate in nr of minutes.

Parameters

[in] nr_of_mins Total nr of mins to wait before waking the device.

Note: Max 23 hrs and 59 minutes. i.e. 1439 mins.

◆ setOnTimerEnabled()

void IRDelonghiAc::setOnTimerEnabled ( const bool on )

Set the enable status of the On Timer.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setPower()

void IRDelonghiAc::setPower ( const bool on )

Change the power setting.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setRaw()

void IRDelonghiAc::setRaw ( const uint64_t state )

Set the internal state from a valid code for this protocol.

Parameters

[in] state A valid code for this protocol.

◆ setSleep()

void IRDelonghiAc::setSleep ( const bool on )

Set the Sleep mode of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setTemp()

void IRDelonghiAc::setTemp	(	const uint8_t	degrees,
		const bool	fahrenheit = `false`,
		const bool	force = `false`
	)

Set the temperature.

Parameters

[in]	degrees	The temperature in degrees.
[in]	fahrenheit	Use Fahrenheit as the temperature scale.
[in]	force	Do we ignore any sanity checks?

◆ setTempUnit()

void IRDelonghiAc::setTempUnit ( const bool fahrenheit )

Change the temperature scale units.

Parameters

[in] fahrenheit true, use Fahrenheit. false, use Celsius.

◆ stateReset()

void IRDelonghiAc::stateReset ( void )

Reset the internal state to a fixed known good state.

◆ toCommon()

stdAc::state_t IRDelonghiAc::toCommon ( void ) const

Convert the current internal state into its stdAc::state_t equivilant.

Returns: The stdAc equivilant of the native settings.

◆ toCommonFanSpeed()

stdAc::fanspeed_t IRDelonghiAc::toCommonFanSpeed ( const uint8_t speed )

static

Convert a native fan speed into its stdAc equivilant.

Parameters

[in] speed The native setting to be converted.

Returns: The stdAc equivilant of the native setting.

◆ toCommonMode()

stdAc::opmode_t IRDelonghiAc::toCommonMode ( const uint8_t mode )

static

Convert a native mode into its stdAc equivilant.

Parameters

[in] mode The native setting to be converted.

Returns: The stdAc equivilant of the native setting.

◆ toString()

String IRDelonghiAc::toString ( void ) const

Convert the current internal state into a human readable string.

Returns: A human readable string.

◆ validChecksum()

bool IRDelonghiAc::validChecksum ( const uint64_t state )

static

Verify the checksum is valid for a given state.

Parameters

[in] state The state to verify the checksum of.

Returns: true, if the state has a valid checksum. Otherwise, false.

Member Data Documentation

◆ _

DelonghiProtocol IRDelonghiAc::_

private

◆ _irsend

IRsend IRDelonghiAc::_irsend

private

instance of the IR send class

◆ _saved_temp

uint8_t IRDelonghiAc::_saved_temp

private

The previously user requested temp value.

◆ _saved_temp_units

uint8_t IRDelonghiAc::_saved_temp_units

private

The previously user requested temp units.

The documentation for this class was generated from the following files:

src/ir_Delonghi.h
src/ir_Delonghi.cpp

Public Member Functions

Static Public Member Functions

Private Member Functions

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ IRDelonghiAc()

Member Function Documentation

◆ begin()

◆ calcChecksum()

◆ calibrate()

◆ checksum()

◆ convertFan()

◆ convertMode()

◆ getBoost()

◆ getFan()

◆ getMode()

◆ getOffTimer()

◆ getOffTimerEnabled()

◆ getOnTimer()

◆ getOnTimerEnabled()

◆ getPower()

◆ getRaw()

◆ getSleep()

◆ getTemp()

◆ getTempUnit()

◆ off()

◆ on()

◆ send()

◆ setBoost()

◆ setFan()

◆ setMode()

◆ setOffTimer()

◆ setOffTimerEnabled()

◆ setOnTimer()

◆ setOnTimerEnabled()

◆ setPower()

◆ setRaw()

◆ setSleep()

◆ setTemp()

◆ setTempUnit()

◆ stateReset()

◆ toCommon()

◆ toCommonFanSpeed()

◆ toCommonMode()

◆ toString()

◆ validChecksum()

Member Data Documentation

◆ _

◆ _irsend

◆ _saved_temp

◆ _saved_temp_units