Class for handling detailed Voltas A/C messages. More...

#include <ir_Voltas.h>

Collaboration diagram for IRVoltas:

Public Member Functions
	IRVoltas (const uint16_t pin, const bool inverted=false, const bool use_modulation=true)
	Class constructor. More...

void	stateReset ()

void	send (const uint16_t repeat=kNoRepeat)
	Send the current internal state as an IR message. More...

int8_t	calibrate (void)
	Run the calibration to calculate uSec timing offsets for this platform. More...

void	begin ()
	Set up hardware to be able to send a message. More...

void	setModel (const voltas_ac_remote_model_t model)
	Set the current model for the remote. More...

voltas_ac_remote_model_t	getModel (const bool raw=false) const
	Get the model information currently known. More...

void	setPower (const bool on)
	Change the power setting. More...

bool	getPower (void) const
	Get the value of the current power setting. More...

void	on (void)
	Change the power setting to On. More...

void	off (void)
	Change the power setting to Off. More...

void	setWifi (const bool on)
	Change the Wifi setting. More...

bool	getWifi (void) const
	Get the value of the current Wifi setting. More...

void	setTemp (const uint8_t temp)
	Set the temperature. More...

uint8_t	getTemp (void)
	Get the current temperature setting. More...

void	setFan (const uint8_t speed)
	Set the speed of the fan. More...

uint8_t	getFan (void)
	Get the current fan speed setting. More...

void	setMode (const uint8_t mode)
	Set the operating mode of the A/C. More...

uint8_t	getMode (void)
	Get the operating mode setting of the A/C. More...

void	setSwingH (const bool on)
	Set the Horizontal Swing setting of the A/C. More...

bool	getSwingH (void) const
	Get the Horizontal Swing setting of the A/C. More...

void	setSwingHChange (const bool on)
	Set the bits for changing the Horizontal Swing setting of the A/C. More...

bool	getSwingHChange (void) const
	Are the Horizontal Swing change bits set in the message? More...

void	setSwingV (const bool on)
	Set the Vertical Swing setting of the A/C. More...

bool	getSwingV (void) const
	Get the Vertical Swing setting of the A/C. More...

void	setEcono (const bool on)
	Change the Economy setting. More...

bool	getEcono (void) const
	Get the value of the current Econo setting. More...

void	setLight (const bool on)
	Change the Light setting. More...

bool	getLight (void) const
	Get the value of the current Light setting. More...

void	setTurbo (const bool on)
	Change the Turbo setting. More...

bool	getTurbo (void) const
	Get the value of the current Turbo setting. More...

void	setSleep (const bool on)
	Change the Sleep setting. More...

bool	getSleep (void) const
	Get the value of the current Sleep setting. More...

uint16_t	getOnTime (void) const
	Get the value of the On Timer time. More...

void	setOnTime (const uint16_t nr_of_mins)
	Set the value of the On Timer time. More...

uint16_t	getOffTime (void) const
	Get the value of the On Timer time. More...

void	setOffTime (const uint16_t nr_of_mins)
	Set the value of the Off Timer time. More...

uint8_t *	getRaw (void)
	Get a PTR to the internal state/code for this protocol. More...

void	setRaw (const uint8_t new_code[])
	Set the internal state from a valid code for this protocol. More...

uint8_t	convertMode (const stdAc::opmode_t mode)
	Convert a stdAc::opmode_t enum into its native mode. More...

uint8_t	convertFan (const stdAc::fanspeed_t speed)
	Convert a stdAc::fanspeed_t enum into it's native speed. More...

stdAc::state_t	toCommon (const stdAc::state_t *prev=NULL)
	Convert the current internal state into its stdAc::state_t equivilant. More...

String	toString (void)
	Convert the current internal state into a human readable string. More...

Static Public Member Functions
static bool	validChecksum (const uint8_t state[], const uint16_t length=kVoltasStateLength)
	Verify the checksum is valid for a given state. More...

static stdAc::opmode_t	toCommonMode (const uint8_t mode)
	Convert a native mode into its stdAc equivilant. More...

static stdAc::fanspeed_t	toCommonFanSpeed (const uint8_t speed)
	Convert a native fan speed into its stdAc equivilant. More...

Private Member Functions
void	checksum (void)
	Calculate and set the checksum values for the internal state. More...

Static Private Member Functions
static uint8_t	calcChecksum (const uint8_t state[], const uint16_t length=kVoltasStateLength)
	Calculate the checksum is valid for a given state. More...

Private Attributes
IRsend	_irsend
	Instance of the IR send class. More...

VoltasProtocol	_
	The state of the IR remote. More...

voltas_ac_remote_model_t	_model
	Model type. More...

Detailed Description

Class for handling detailed Voltas A/C messages.

Constructor & Destructor Documentation

◆ IRVoltas()

IRVoltas::IRVoltas	(	const uint16_t	pin,
		const bool	inverted = `false`,
		const bool	use_modulation = `true`
	)

explicit

Class constructor.

Parameters

[in]	pin	GPIO to be used when sending.
[in]	inverted	Is the output signal to be inverted?
[in]	use_modulation	Is frequency modulation to be used?

Member Function Documentation

◆ begin()

void IRVoltas::begin ( )

Set up hardware to be able to send a message.

◆ calcChecksum()

uint8_t IRVoltas::calcChecksum	(	const uint8_t	state[],
		const uint16_t	length = `kVoltasStateLength`
	)

staticprivate

Calculate the checksum is valid for a given state.

Parameters

[in]	state	The array to calculate the checksum of.
[in]	length	The length of the state array.

Returns: The valid checksum value for the state.

◆ calibrate()

int8_t IRVoltas::calibrate ( void )

inline

Run the calibration to calculate uSec timing offsets for this platform.

Returns: The uSec timing offset needed per modulation of the IR Led.

Note: This will produce a 65ms IR signal pulse at 38kHz. Only ever needs to be run once per object instantiation, if at all.

◆ checksum()

void IRVoltas::checksum ( void )

private

Calculate and set the checksum values for the internal state.

◆ convertFan()

uint8_t IRVoltas::convertFan ( const stdAc::fanspeed_t speed )

Convert a stdAc::fanspeed_t enum into it's native speed.

Parameters

[in] speed The enum to be converted.

Returns: The native equivilant of the enum.

◆ convertMode()

uint8_t IRVoltas::convertMode ( const stdAc::opmode_t mode )

Convert a stdAc::opmode_t enum into its native mode.

Parameters

[in] mode The enum to be converted.

Returns: The native equivilant of the enum.

◆ getEcono()

bool IRVoltas::getEcono ( void ) const

Get the value of the current Econo setting.

Returns: true, the setting is on. false, the setting is off.

◆ getFan()

uint8_t IRVoltas::getFan ( void )

Get the current fan speed setting.

Returns: The current fan speed/mode.

◆ getLight()

bool IRVoltas::getLight ( void ) const

Get the value of the current Light setting.

Returns: true, the setting is on. false, the setting is off.

◆ getMode()

uint8_t IRVoltas::getMode ( void )

Get the operating mode setting of the A/C.

Returns: The current operating mode setting.

◆ getModel()

voltas_ac_remote_model_t IRVoltas::getModel ( const bool raw = false ) const

Get the model information currently known.

Parameters

[in] raw Work out the model info from the current raw state.

Returns: The known model number.

◆ getOffTime()

uint16_t IRVoltas::getOffTime ( void ) const

Get the value of the On Timer time.

Returns: Number of minutes before the timer activates.

◆ getOnTime()

uint16_t IRVoltas::getOnTime ( void ) const

Get the value of the On Timer time.

Returns: Number of minutes before the timer activates.

◆ getPower()

bool IRVoltas::getPower ( void ) const

Get the value of the current power setting.

Returns: true, the setting is on. false, the setting is off.

◆ getRaw()

uint8_t * IRVoltas::getRaw ( void )

Get a PTR to the internal state/code for this protocol.

Returns: PTR to a code for this protocol based on the current internal state.

◆ getSleep()

bool IRVoltas::getSleep ( void ) const

Get the value of the current Sleep setting.

Returns: true, the setting is on. false, the setting is off.

◆ getSwingH()

bool IRVoltas::getSwingH ( void ) const

Get the Horizontal Swing setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getSwingHChange()

bool IRVoltas::getSwingHChange ( void ) const

Are the Horizontal Swing change bits set in the message?

Returns: true, the correct bits are set. false, the correct bits are not set.

◆ getSwingV()

bool IRVoltas::getSwingV ( void ) const

Get the Vertical Swing setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getTemp()

uint8_t IRVoltas::getTemp ( void )

Get the current temperature setting.

Returns: The current setting for temp. in degrees celsius.

◆ getTurbo()

bool IRVoltas::getTurbo ( void ) const

Get the value of the current Turbo setting.

Returns: true, the setting is on. false, the setting is off.

◆ getWifi()

bool IRVoltas::getWifi ( void ) const

Get the value of the current Wifi setting.

Returns: true, the setting is on. false, the setting is off.

◆ off()

void IRVoltas::off ( void )

Change the power setting to Off.

◆ on()

void IRVoltas::on ( void )

Change the power setting to On.

◆ send()

void IRVoltas::send ( const uint16_t repeat = kNoRepeat )

Send the current internal state as an IR message.

Parameters

[in] repeat Nr. of times the message will be repeated.

◆ setEcono()

void IRVoltas::setEcono ( const bool on )

Change the Economy setting.

Parameters

[in] on true, the setting is on. false, the setting is off.

Note: The Economy setting is only available in Cool mode.

◆ setFan()

void IRVoltas::setFan ( const uint8_t fan )

Set the speed of the fan.

Parameters

[in] fan The desired setting.

◆ setLight()

void IRVoltas::setLight ( const bool on )

Change the Light setting.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setMode()

void IRVoltas::setMode ( const uint8_t mode )

Set the operating mode of the A/C.

Parameters

[in] mode The desired operating mode.

Note: If we get an unexpected mode, default to AUTO.

◆ setModel()

void IRVoltas::setModel ( const voltas_ac_remote_model_t model )

Set the current model for the remote.

Parameters

[in] model The model number.

◆ setOffTime()

void IRVoltas::setOffTime ( const uint16_t nr_of_mins )

Set the value of the Off Timer time.

Parameters

[in] nr_of_mins Number of minutes before the timer activates. 0 disables the timer. Max is 23 hrs & 59 mins (1439 mins)

◆ setOnTime()

void IRVoltas::setOnTime ( const uint16_t nr_of_mins )

Set the value of the On Timer time.

Parameters

[in] nr_of_mins Number of minutes before the timer activates. 0 disables the timer. Max is 23 hrs & 59 mins (1439 mins)

◆ setPower()

void IRVoltas::setPower ( const bool on )

Change the power setting.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setRaw()

void IRVoltas::setRaw ( const uint8_t new_code[] )

Set the internal state from a valid code for this protocol.

Parameters

[in] new_code A valid code for this protocol.

◆ setSleep()

void IRVoltas::setSleep ( const bool on )

Change the Sleep setting.

Parameters

[in] on true, the setting is on. false, the setting is off.

Note: The Sleep setting is only available in Cool mode.

◆ setSwingH()

void IRVoltas::setSwingH ( const bool on )

Set the Horizontal Swing setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setSwingHChange()

void IRVoltas::setSwingHChange ( const bool on )

Set the bits for changing the Horizontal Swing setting of the A/C.

Parameters

[in] on true, the change bits are set. false, the "no change" bits are set.

◆ setSwingV()

void IRVoltas::setSwingV ( const bool on )

Set the Vertical Swing setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setTemp()

void IRVoltas::setTemp ( const uint8_t temp )

Set the temperature.

Parameters

[in] temp The temperature in degrees celsius.

◆ setTurbo()

void IRVoltas::setTurbo ( const bool on )

Change the Turbo setting.

Parameters

[in] on true, the setting is on. false, the setting is off.

Note: The Turbo setting is only available in Cool mode.

◆ setWifi()

void IRVoltas::setWifi ( const bool on )

Change the Wifi setting.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ stateReset()

void IRVoltas::stateReset ( )

◆ toCommon()

stdAc::state_t IRVoltas::toCommon ( const stdAc::state_t * prev = NULL )

Convert the current internal state into its stdAc::state_t equivilant.

Parameters

[in] prev Ptr to the previous state if available.

Returns: The stdAc equivilant of the native settings.

◆ toCommonFanSpeed()

stdAc::fanspeed_t IRVoltas::toCommonFanSpeed ( const uint8_t spd )

static

Convert a native fan speed into its stdAc equivilant.

Parameters

[in] spd The native setting to be converted.

Returns: The stdAc equivilant of the native setting.

◆ toCommonMode()

stdAc::opmode_t IRVoltas::toCommonMode ( const uint8_t mode )

static

Convert a native mode into its stdAc equivilant.

Parameters

[in] mode The native setting to be converted.

Returns: The stdAc equivilant of the native setting.

◆ toString()

String IRVoltas::toString ( void )

Convert the current internal state into a human readable string.

Returns: A human readable string.

◆ validChecksum()

bool IRVoltas::validChecksum	(	const uint8_t	state[],
		const uint16_t	length = `kVoltasStateLength`
	)

static

Verify the checksum is valid for a given state.

Parameters

[in]	state	The array to verify the checksum of.
[in]	length	The length of the state array.

Returns: true, if the state has a valid checksum. Otherwise, false.

Member Data Documentation

◆ _

VoltasProtocol IRVoltas::_

private

The state of the IR remote.

◆ _irsend

IRsend IRVoltas::_irsend

private

Instance of the IR send class.

◆ _model

voltas_ac_remote_model_t IRVoltas::_model

private

Model type.

The documentation for this class was generated from the following files:

src/ir_Voltas.h
src/ir_Voltas.cpp

Public Member Functions

Static Public Member Functions

Private Member Functions

Static Private Member Functions

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ IRVoltas()

Member Function Documentation

◆ begin()

◆ calcChecksum()

◆ calibrate()

◆ checksum()

◆ convertFan()

◆ convertMode()

◆ getEcono()

◆ getFan()

◆ getLight()

◆ getMode()

◆ getModel()

◆ getOffTime()

◆ getOnTime()

◆ getPower()

◆ getRaw()

◆ getSleep()

◆ getSwingH()

◆ getSwingHChange()

◆ getSwingV()

◆ getTemp()

◆ getTurbo()

◆ getWifi()

◆ off()

◆ on()

◆ send()

◆ setEcono()

◆ setFan()

◆ setLight()

◆ setMode()

◆ setModel()

◆ setOffTime()

◆ setOnTime()

◆ setPower()

◆ setRaw()

◆ setSleep()

◆ setSwingH()

◆ setSwingHChange()

◆ setSwingV()

◆ setTemp()

◆ setTurbo()

◆ setWifi()

◆ stateReset()

◆ toCommon()

◆ toCommonFanSpeed()

◆ toCommonMode()

◆ toString()

◆ validChecksum()

Member Data Documentation

◆ _

◆ _irsend

◆ _model