Class for handling detailed Neoclima A/C messages. More...

#include <ir_Neoclima.h>

Collaboration diagram for IRNeoclimaAc:

Public Member Functions
	IRNeoclimaAc (const uint16_t pin, const bool inverted=false, const bool use_modulation=true)
	Class constructor. More...

void	stateReset (void)
	Reset the state of the remote to a known good state/sequence. More...

void	send (const uint16_t repeat=kNeoclimaMinRepeat)
	Send the current internal state as an IR message. More...

int8_t	calibrate (void)
	Run the calibration to calculate uSec timing offsets for this platform. More...

void	begin (void)
	Set up hardware to be able to send a message. More...

void	setButton (const uint8_t button)
	Set the Button/Command pressed setting of the A/C. More...

uint8_t	getButton (void)
	Get the Button/Command setting of the A/C. More...

void	on (void)
	Set the requested power state of the A/C to on. More...

void	off (void)
	Set the requested power state of the A/C to off. More...

void	setPower (const bool on)
	Change the power setting. More...

bool	getPower (void)
	Get the value of the current power setting. More...

void	setMode (const uint8_t mode)
	Set the operating mode of the A/C. More...

uint8_t	getMode (void)
	Get the operating mode setting of the A/C. More...

void	setTemp (const uint8_t temp, const bool celsius=true)
	Set the temperature. More...

uint8_t	getTemp (void)
	Get the current temperature setting. More...

void	setFan (const uint8_t speed)
	Set the speed of the fan. More...

uint8_t	getFan (void)
	Get the current fan speed setting. More...

void	setSwingV (const bool on)
	Set the vertical swing setting of the A/C. More...

bool	getSwingV (void)
	Get the vertical swing setting of the A/C. More...

void	setSwingH (const bool on)
	Set the horizontal swing setting of the A/C. More...

bool	getSwingH (void)
	Get the horizontal swing (Air Flow) setting of the A/C. More...

void	setSleep (const bool on)
	Set the Sleep setting of the A/C. More...

bool	getSleep (void)
	Get the Sleep setting of the A/C. More...

void	setTurbo (const bool on)
	Set the Turbo setting of the A/C. More...

bool	getTurbo (void)
	Get the Turbo setting of the A/C. More...

void	setEcono (const bool on)
	Set the Economy (Energy Saver) setting of the A/C. More...

bool	getEcono (void)
	Get the Economy (Energy Saver) setting of the A/C. More...

void	setFresh (const bool on)
	Set the Fresh (air) setting of the A/C. More...

bool	getFresh (void)
	Get the Fresh (air) setting of the A/C. More...

void	setHold (const bool on)
	Set the Hold setting of the A/C. More...

bool	getHold (void)
	Get the Hold setting of the A/C. More...

void	setIon (const bool on)
	Set the Ion (filter) setting of the A/C. More...

bool	getIon (void)
	Get the Ion (filter) setting of the A/C. More...

void	setLight (const bool on)
	Set the Light(LED display) setting of the A/C. More...

bool	getLight (void)
	Get the Light (LED display) setting of the A/C. More...

void	set8CHeat (const bool on)
	Set the 8°C Heat setting of the A/C. More...

bool	get8CHeat (void)
	Get the 8°C Heat setting of the A/C. More...

void	setEye (const bool on)
	Set the Eye (Sensor) setting of the A/C. More...

bool	getEye (void)
	Get the Eye (Sensor) setting of the A/C. More...

bool	getTempUnits (void)
	Is the A/C unit using Fahrenheit or Celsius for temperature units. More...

bool	getFollow (void)
	Get the Follow Me setting of the A/C. More...

uint8_t *	getRaw (void)
	Get a PTR to the internal state/code for this protocol. More...

void	setRaw (const uint8_t new_code[], const uint16_t length=kNeoclimaStateLength)
	Set the internal state from a valid code for this protocol. More...

String	toString (void)
	Convert the current internal state into a human readable string. More...

uint8_t	convertMode (const stdAc::opmode_t mode)
	Convert a stdAc::opmode_t enum into its native mode. More...

uint8_t	convertFan (const stdAc::fanspeed_t speed)
	Convert a stdAc::fanspeed_t enum into it's native speed. More...

stdAc::state_t	toCommon (void)
	Convert the current internal state into its stdAc::state_t equivalent. More...

Static Public Member Functions
static bool	validChecksum (const uint8_t state[], const uint16_t length=kNeoclimaStateLength)
	Verify the checksum is valid for a given state. More...

static uint8_t	calcChecksum (const uint8_t state[], const uint16_t length=kNeoclimaStateLength)
	Calculate the checksum for a given state. More...

static stdAc::opmode_t	toCommonMode (const uint8_t mode)
	Convert a native mode into its stdAc equivalent. More...

static stdAc::fanspeed_t	toCommonFanSpeed (const uint8_t speed)
	Convert a native fan speed into its stdAc equivalent. More...

Private Member Functions
void	checksum (const uint16_t length=kNeoclimaStateLength)
	Calculate & update the checksum for the internal state. More...

Private Attributes
IRsend	_irsend
	Instance of the IR send class. More...

uint8_t	remote_state [kNeoclimaStateLength]
	State of the remote in code. More...

Detailed Description

Class for handling detailed Neoclima A/C messages.

Constructor & Destructor Documentation

◆ IRNeoclimaAc()

IRNeoclimaAc::IRNeoclimaAc	(	const uint16_t	pin,
		const bool	inverted = `false`,
		const bool	use_modulation = `true`
	)

explicit

Class constructor.

Parameters

[in]	pin	GPIO to be used when sending.
[in]	inverted	Is the output signal to be inverted?
[in]	use_modulation	Is frequency modulation to be used?

Member Function Documentation

◆ begin()

void IRNeoclimaAc::begin ( void )

Set up hardware to be able to send a message.

◆ calcChecksum()

uint8_t IRNeoclimaAc::calcChecksum	(	const uint8_t	state[],
		const uint16_t	length = `kNeoclimaStateLength`
	)

static

Calculate the checksum for a given state.

Parameters

[in]	state	The array to calc the checksum of.
[in]	length	The length/size of the array.

Returns: The calculated checksum value.

◆ calibrate()

int8_t IRNeoclimaAc::calibrate ( void )

inline

Run the calibration to calculate uSec timing offsets for this platform.

Returns: The uSec timing offset needed per modulation of the IR Led.

Note: This will produce a 65ms IR signal pulse at 38kHz. Only ever needs to be run once per object instantiation, if at all.

◆ checksum()

void IRNeoclimaAc::checksum ( const uint16_t length = kNeoclimaStateLength )

private

Calculate & update the checksum for the internal state.

Parameters

[in] length The length/size of the internal state.

◆ convertFan()

uint8_t IRNeoclimaAc::convertFan ( const stdAc::fanspeed_t speed )

Convert a stdAc::fanspeed_t enum into it's native speed.

Parameters

[in] speed The enum to be converted.

Returns: The native equivalent of the enum.

◆ convertMode()

uint8_t IRNeoclimaAc::convertMode ( const stdAc::opmode_t mode )

Convert a stdAc::opmode_t enum into its native mode.

Parameters

[in] mode The enum to be converted.

Returns: The native equivalent of the enum.

◆ get8CHeat()

bool IRNeoclimaAc::get8CHeat ( void )

Get the 8°C Heat setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getButton()

uint8_t IRNeoclimaAc::getButton ( void )

Get the Button/Command setting of the A/C.

Returns: The value of the button/command that was pressed.

◆ getEcono()

bool IRNeoclimaAc::getEcono ( void )

Get the Economy (Energy Saver) setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getEye()

bool IRNeoclimaAc::getEye ( void )

Get the Eye (Sensor) setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getFan()

uint8_t IRNeoclimaAc::getFan ( void )

Get the current fan speed setting.

Returns: The current fan speed/mode.

◆ getFollow()

bool IRNeoclimaAc::getFollow ( void )

Get the Follow Me setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getFresh()

bool IRNeoclimaAc::getFresh ( void )

Get the Fresh (air) setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getHold()

bool IRNeoclimaAc::getHold ( void )

Get the Hold setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getIon()

bool IRNeoclimaAc::getIon ( void )

Get the Ion (filter) setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getLight()

bool IRNeoclimaAc::getLight ( void )

Get the Light (LED display) setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getMode()

uint8_t IRNeoclimaAc::getMode ( void )

Get the operating mode setting of the A/C.

Returns: The current operating mode setting.

◆ getPower()

bool IRNeoclimaAc::getPower ( void )

Get the value of the current power setting.

Returns: true, the setting is on. false, the setting is off.

◆ getRaw()

uint8_t * IRNeoclimaAc::getRaw ( void )

Get a PTR to the internal state/code for this protocol.

Returns: PTR to a code for this protocol based on the current internal state.

◆ getSleep()

bool IRNeoclimaAc::getSleep ( void )

Get the Sleep setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getSwingH()

bool IRNeoclimaAc::getSwingH ( void )

Get the horizontal swing (Air Flow) setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getSwingV()

bool IRNeoclimaAc::getSwingV ( void )

Get the vertical swing setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getTemp()

uint8_t IRNeoclimaAc::getTemp ( void )

Get the current temperature setting.

Returns: The current setting for temp. in degrees.

Note: The units of the temperature (F/C) is determined by getTempUnits().

◆ getTempUnits()

bool IRNeoclimaAc::getTempUnits ( void )

Is the A/C unit using Fahrenheit or Celsius for temperature units.

Returns: false, Fahrenheit. true, Celsius.

◆ getTurbo()

bool IRNeoclimaAc::getTurbo ( void )

Get the Turbo setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ off()

void IRNeoclimaAc::off ( void )

Set the requested power state of the A/C to off.

◆ on()

void IRNeoclimaAc::on ( void )

Set the requested power state of the A/C to on.

◆ send()

void IRNeoclimaAc::send ( const uint16_t repeat = kNeoclimaMinRepeat )

Send the current internal state as an IR message.

Parameters

[in] repeat Nr. of times the message will be repeated.

◆ set8CHeat()

void IRNeoclimaAc::set8CHeat ( const bool on )

Set the 8°C Heat setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

Note: This feature maintains the room temperature steadily at 8°C and prevents the room from freezing by activating the heating operation automatically when nobody is at home over a longer period during severe winter.

◆ setButton()

void IRNeoclimaAc::setButton ( const uint8_t button )

Set the Button/Command pressed setting of the A/C.

Parameters

[in] button The value of the button/command that was pressed.

◆ setEcono()

void IRNeoclimaAc::setEcono ( const bool on )

Set the Economy (Energy Saver) setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setEye()

void IRNeoclimaAc::setEye ( const bool on )

Set the Eye (Sensor) setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setFan()

void IRNeoclimaAc::setFan ( const uint8_t speed )

Set the speed of the fan.

Parameters

[in] speed The desired setting. 0-3, 0 is auto, 1-3 is the speed

◆ setFresh()

void IRNeoclimaAc::setFresh ( const bool on )

Set the Fresh (air) setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setHold()

void IRNeoclimaAc::setHold ( const bool on )

Set the Hold setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setIon()

void IRNeoclimaAc::setIon ( const bool on )

Set the Ion (filter) setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setLight()

void IRNeoclimaAc::setLight ( const bool on )

Set the Light(LED display) setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setMode()

void IRNeoclimaAc::setMode ( const uint8_t mode )

Set the operating mode of the A/C.

Parameters

[in] mode The desired operating mode.

◆ setPower()

void IRNeoclimaAc::setPower ( const bool on )

Change the power setting.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setRaw()

void IRNeoclimaAc::setRaw	(	const uint8_t	new_code[],
		const uint16_t	length = `kNeoclimaStateLength`
	)

Set the internal state from a valid code for this protocol.

Parameters

[in]	new_code	A valid code for this protocol.
[in]	length	The length/size of the new_code array.

◆ setSleep()

void IRNeoclimaAc::setSleep ( const bool on )

Set the Sleep setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setSwingH()

void IRNeoclimaAc::setSwingH ( const bool on )

Set the horizontal swing setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setSwingV()

void IRNeoclimaAc::setSwingV ( const bool on )

Set the vertical swing setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setTemp()

void IRNeoclimaAc::setTemp	(	const uint8_t	temp,
		const bool	celsius = `true`
	)

Set the temperature.

Parameters

[in]	temp	The temperature in degrees celsius.
[in]	celsius	Use Fahrenheit (false) or Celsius (true).

◆ setTurbo()

void IRNeoclimaAc::setTurbo ( const bool on )

Set the Turbo setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ stateReset()

void IRNeoclimaAc::stateReset ( void )

Reset the state of the remote to a known good state/sequence.

◆ toCommon()

stdAc::state_t IRNeoclimaAc::toCommon ( void )

Convert the current internal state into its stdAc::state_t equivalent.

Returns: The stdAc equivalent of the native settings.

◆ toCommonFanSpeed()

stdAc::fanspeed_t IRNeoclimaAc::toCommonFanSpeed ( const uint8_t speed )

static

Convert a native fan speed into its stdAc equivalent.

Parameters

[in] speed The native setting to be converted.

Returns: The stdAc equivalent of the native setting.

◆ toCommonMode()

stdAc::opmode_t IRNeoclimaAc::toCommonMode ( const uint8_t mode )

static

Convert a native mode into its stdAc equivalent.

Parameters

[in] mode The native setting to be converted.

Returns: The stdAc equivalent of the native setting.

◆ toString()

String IRNeoclimaAc::toString ( void )

Convert the current internal state into a human readable string.

Returns: A human readable string.

◆ validChecksum()

bool IRNeoclimaAc::validChecksum	(	const uint8_t	state[],
		const uint16_t	length = `kNeoclimaStateLength`
	)

static

Verify the checksum is valid for a given state.

Parameters

[in]	state	The array to verify the checksum of.
[in]	length	The length/size of the array.

Returns: true, if the state has a valid checksum. Otherwise, false.

Member Data Documentation

◆ _irsend

IRsend IRNeoclimaAc::_irsend

private

Instance of the IR send class.

◆ remote_state

uint8_t IRNeoclimaAc::remote_state[kNeoclimaStateLength]

private

State of the remote in code.

The documentation for this class was generated from the following files:

src/ir_Neoclima.h
src/ir_Neoclima.cpp

Public Member Functions

Static Public Member Functions

Private Member Functions

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ IRNeoclimaAc()

Member Function Documentation

◆ begin()

◆ calcChecksum()

◆ calibrate()

◆ checksum()

◆ convertFan()

◆ convertMode()

◆ get8CHeat()

◆ getButton()

◆ getEcono()

◆ getEye()

◆ getFan()

◆ getFollow()

◆ getFresh()

◆ getHold()

◆ getIon()

◆ getLight()

◆ getMode()

◆ getPower()

◆ getRaw()

◆ getSleep()

◆ getSwingH()

◆ getSwingV()

◆ getTemp()

◆ getTempUnits()

◆ getTurbo()

◆ off()

◆ on()

◆ send()

◆ set8CHeat()

◆ setButton()

◆ setEcono()

◆ setEye()

◆ setFan()

◆ setFresh()

◆ setHold()

◆ setIon()

◆ setLight()

◆ setMode()

◆ setPower()

◆ setRaw()

◆ setSleep()

◆ setSwingH()

◆ setSwingV()

◆ setTemp()

◆ setTurbo()

◆ stateReset()

◆ toCommon()

◆ toCommonFanSpeed()

◆ toCommonMode()

◆ toString()

◆ validChecksum()

Member Data Documentation

◆ _irsend

◆ remote_state