Class for handling detailed Fujitsu A/C messages. More...

#include <ir_Fujitsu.h>

Collaboration diagram for IRFujitsuAC:

Public Member Functions
	IRFujitsuAC (const uint16_t pin, const fujitsu_ac_remote_model_t model=ARRAH2E, const bool inverted=false, const bool use_modulation=true)
	Class Constructor. More...

void	setModel (const fujitsu_ac_remote_model_t model)
	Set the currently emulated model of the A/C. More...

fujitsu_ac_remote_model_t	getModel (void)
	Get the currently emulated/detected model of the A/C. More...

void	stateReset (void)
	Reset the state of the remote to a known good state/sequence. More...

void	send (const uint16_t repeat=kFujitsuAcMinRepeat)
	Send the current internal state as an IR message. More...

int8_t	calibrate (void)
	Run the calibration to calculate uSec timing offsets for this platform. More...

void	begin (void)
	Set up hardware to be able to send a message. More...

void	stepHoriz (void)
	Request the A/C to step the Horizontal Swing. More...

void	toggleSwingHoriz (const bool update=true)
	Request the A/C to toggle the Horizontal Swing mode. More...

void	stepVert (void)
	Request the A/C to step the Vertical Swing. More...

void	toggleSwingVert (const bool update=true)
	Request the A/C to toggle the Vertical Swing mode. More...

void	setCmd (const uint8_t cmd)
	Set the requested (special) command part for the A/C message. More...

uint8_t	getCmd (const bool raw=false)
	Set the requested (special) command part for the A/C message. More...

void	setTemp (const uint8_t temp)
	Set the temperature. More...

uint8_t	getTemp (void)
	Get the current temperature setting. More...

void	setFanSpeed (const uint8_t fan)
	Set the speed of the fan. More...

uint8_t	getFanSpeed (void)
	Get the current fan speed setting. More...

void	setMode (const uint8_t mode)
	Set the operating mode of the A/C. More...

uint8_t	getMode (void)
	Get the operating mode setting of the A/C. More...

void	setSwing (const uint8_t mode)
	Set the requested swing operation mode of the A/C unit. More...

uint8_t	getSwing (const bool raw=false)
	Get the requested swing operation mode of the A/C unit. More...

uint8_t *	getRaw (void)
	Get a PTR to the internal state/code for this protocol. More...

bool	setRaw (const uint8_t newState[], const uint16_t length)
	Set the internal state from a valid code for this protocol. More...

uint8_t	getStateLength (void)
	Get the length (size) of the state code for the current configuration. More...

void	setPower (const bool on)
	Change the power setting. More...

void	off (void)
	Set the requested power state of the A/C to off. More...

void	on (void)
	Set the requested power state of the A/C to on. More...

bool	getPower (void)
	Get the value of the current power setting. More...

void	setClean (const bool on)
	Set the Clean mode of the A/C. More...

bool	getClean (const bool raw=false)
	Get the Clean mode status of the A/C. More...

void	setFilter (const bool on)
	Set the Filter mode status of the A/C. More...

bool	getFilter (const bool raw=false)
	Get the Filter mode status of the A/C. More...

void	setOutsideQuiet (const bool on)
	Set the Outside Quiet mode of the A/C. More...

bool	getOutsideQuiet (const bool raw=false)
	Get the Outside Quiet mode status of the A/C. More...

uint8_t	getTimerType (const bool raw=false)
	Get the Timer type of the A/C message. More...

void	setTimerType (const uint8_t timertype)
	Set the Timer type of the A/C message. More...

uint16_t	getOnTimer (const bool raw=false)
	Get the On Timer setting of the A/C. More...

void	setOnTimer (const uint16_t nr_mins)
	Set the On Timer setting of the A/C. More...

uint16_t	getOffSleepTimer (const bool raw=false)
	Get the Off/Sleep Timer setting of the A/C. More...

void	setOffTimer (const uint16_t nr_mins)
	Set the Off Timer time for the A/C. More...

void	setSleepTimer (const uint16_t nr_mins)
	Set the Sleep Timer time for the A/C. More...

uint8_t	convertMode (const stdAc::opmode_t mode)
	Convert a stdAc::opmode_t enum into its native mode. More...

uint8_t	convertFan (stdAc::fanspeed_t speed)
	Convert a stdAc::fanspeed_t enum into it's native speed. More...

stdAc::state_t	toCommon (void)
	Convert the current internal state into its stdAc::state_t equivalent. More...

String	toString (void)
	Convert the current internal state into a human readable string. More...

Static Public Member Functions
static bool	validChecksum (uint8_t *state, const uint16_t length)
	Verify the checksum is valid for a given state. More...

static stdAc::opmode_t	toCommonMode (const uint8_t mode)
	Convert a native mode into its stdAc equivalent. More...

static stdAc::fanspeed_t	toCommonFanSpeed (const uint8_t speed)
	Convert a native fan speed into its stdAc equivalent. More...

Private Member Functions
void	buildState (void)
	(Re)Build the state from the currently configured settings. More...

void	buildFromState (const uint16_t length)
	Build the internal state/config from the current (raw) A/C message. More...

void	setOffSleepTimer (const uint16_t nr_mins)
	Set the Off/Sleep Timer time for the A/C. More...

Private Attributes
IRsend	_irsend
	Instance of the IR send class. More...

uint8_t	remote_state [kFujitsuAcStateLength]
	The state of the IR remote. More...

uint8_t	_temp

uint8_t	_fanSpeed

uint8_t	_mode

uint8_t	_swingMode

uint8_t	_cmd

fujitsu_ac_remote_model_t	_model

uint8_t	_state_length

uint8_t	_state_length_short

bool	_outsideQuiet

bool	_clean

bool	_filter

uint16_t	_ontimer

uint16_t	_offtimer

uint8_t	_timertype

Detailed Description

Class for handling detailed Fujitsu A/C messages.

Constructor & Destructor Documentation

◆ IRFujitsuAC()

IRFujitsuAC::IRFujitsuAC	(	const uint16_t	pin,
		const fujitsu_ac_remote_model_t	model = `ARRAH2E`,
		const bool	inverted = `false`,
		const bool	use_modulation = `true`
	)

explicit

Class Constructor.

Parameters

[in]	pin	GPIO to be used when sending.
[in]	model	The enum for the model of A/C to be emulated.
[in]	inverted	Is the output signal to be inverted?
[in]	use_modulation	Is frequency modulation to be used?

Member Function Documentation

◆ begin()

void IRFujitsuAC::begin ( void )

Set up hardware to be able to send a message.

◆ buildFromState()

void IRFujitsuAC::buildFromState ( const uint16_t length )

private

Build the internal state/config from the current (raw) A/C message.

Parameters

[in] length Size of the current/used (raw) A/C message array.

◆ buildState()

void IRFujitsuAC::buildState ( void )

private

(Re)Build the state from the currently configured settings.

◆ calibrate()

int8_t IRFujitsuAC::calibrate ( void )

inline

Run the calibration to calculate uSec timing offsets for this platform.

Returns: The uSec timing offset needed per modulation of the IR Led.

Note: This will produce a 65ms IR signal pulse at 38kHz. Only ever needs to be run once per object instantiation, if at all.

◆ convertFan()

uint8_t IRFujitsuAC::convertFan ( stdAc::fanspeed_t speed )

Convert a stdAc::fanspeed_t enum into it's native speed.

Parameters

[in] speed The enum to be converted.

Returns: The native equivalent of the enum.

◆ convertMode()

uint8_t IRFujitsuAC::convertMode ( const stdAc::opmode_t mode )

Convert a stdAc::opmode_t enum into its native mode.

Parameters

[in] mode The enum to be converted.

Returns: The native equivalent of the enum.

◆ getClean()

bool IRFujitsuAC::getClean ( const bool raw = false )

Get the Clean mode status of the A/C.

Parameters

[in] raw Do we get the result from base data?

Returns: true, the setting is on. false, the setting is off.

◆ getCmd()

uint8_t IRFujitsuAC::getCmd ( const bool raw = false )

Set the requested (special) command part for the A/C message.

Parameters

[in] raw Do we need to get it from first principles from the raw data?

Returns: The special command code.

◆ getFanSpeed()

uint8_t IRFujitsuAC::getFanSpeed ( void )

Get the current fan speed setting.

Returns: The current fan speed.

◆ getFilter()

bool IRFujitsuAC::getFilter ( const bool raw = false )

Get the Filter mode status of the A/C.

Parameters

[in] raw Do we get the result from base data?

Returns: true, the setting is on. false, the setting is off.

◆ getMode()

uint8_t IRFujitsuAC::getMode ( void )

Get the operating mode setting of the A/C.

Returns: The current operating mode setting.

◆ getModel()

fujitsu_ac_remote_model_t IRFujitsuAC::getModel ( void )

Get the currently emulated/detected model of the A/C.

Returns: The enum representing the model of A/C.

◆ getOffSleepTimer()

uint16_t IRFujitsuAC::getOffSleepTimer ( const bool raw = false )

Get the Off/Sleep Timer setting of the A/C.

Parameters

[in] raw Do we get the result from base data?

Returns: nr of minutes left on the timer. 0 means disabled/not supported.

◆ getOnTimer()

uint16_t IRFujitsuAC::getOnTimer ( const bool raw = false )

Get the On Timer setting of the A/C.

Parameters

[in] raw Do we get the result from base data?

Returns: nr of minutes left on the timer. 0 means disabled/not supported.

◆ getOutsideQuiet()

bool IRFujitsuAC::getOutsideQuiet ( const bool raw = false )

Get the Outside Quiet mode status of the A/C.

Parameters

[in] raw Do we get the result from base data?

Returns: true, the setting is on. false, the setting is off.

◆ getPower()

bool IRFujitsuAC::getPower ( void )

Get the value of the current power setting.

Returns: true, the setting is on. false, the setting is off.

◆ getRaw()

uint8_t * IRFujitsuAC::getRaw ( void )

Get a PTR to the internal state/code for this protocol.

Returns: PTR to a code for this protocol based on the current internal state.

◆ getStateLength()

uint8_t IRFujitsuAC::getStateLength ( void )

Get the length (size) of the state code for the current configuration.

Returns: The length of the state array required for this config.

◆ getSwing()

uint8_t IRFujitsuAC::getSwing ( const bool raw = false )

Get the requested swing operation mode of the A/C unit.

Parameters

[in] raw Do we need to get it from first principles from the raw data?

Returns: The contents of the swing state/mode.

◆ getTemp()

uint8_t IRFujitsuAC::getTemp ( void )

Get the current temperature setting.

Returns: The current setting for temp. in degrees celsius.

◆ getTimerType()

uint8_t IRFujitsuAC::getTimerType ( const bool raw = false )

Get the Timer type of the A/C message.

Parameters

[in] raw Do we get the result from base data?

Returns: The current timer type in numeric form.

◆ off()

void IRFujitsuAC::off ( void )

Set the requested power state of the A/C to off.

◆ on()

void IRFujitsuAC::on ( void )

Set the requested power state of the A/C to on.

◆ send()

void IRFujitsuAC::send ( const uint16_t repeat = kFujitsuAcMinRepeat )

Send the current internal state as an IR message.

Parameters

[in] repeat Nr. of times the message will be repeated.

◆ setClean()

void IRFujitsuAC::setClean ( const bool on )

Set the Clean mode of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setCmd()

void IRFujitsuAC::setCmd ( const uint8_t cmd )

Set the requested (special) command part for the A/C message.

Parameters

[in] cmd The special command code.

◆ setFanSpeed()

void IRFujitsuAC::setFanSpeed ( const uint8_t fanSpeed )

Set the speed of the fan.

Parameters

[in] fanSpeed The desired setting.

◆ setFilter()

void IRFujitsuAC::setFilter ( const bool on )

Set the Filter mode status of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setMode()

void IRFujitsuAC::setMode ( const uint8_t mode )

Set the operating mode of the A/C.

Parameters

[in] mode The desired operating mode.

◆ setModel()

void IRFujitsuAC::setModel ( const fujitsu_ac_remote_model_t model )

Set the currently emulated model of the A/C.

Parameters

[in] model An enum representing the model to support/emulate.

◆ setOffSleepTimer()

void IRFujitsuAC::setOffSleepTimer ( const uint16_t nr_mins )

private

Set the Off/Sleep Timer time for the A/C.

Parameters

[in] nr_mins Nr. of minutes to set the timer to. 0 means disabled.

◆ setOffTimer()

void IRFujitsuAC::setOffTimer ( const uint16_t nr_mins )

Set the Off Timer time for the A/C.

Parameters

[in] nr_mins Nr. of minutes to set the timer to. 0 means disabled.

◆ setOnTimer()

void IRFujitsuAC::setOnTimer ( const uint16_t nr_mins )

Set the On Timer setting of the A/C.

Parameters

[in] nr_mins Nr. of minutes to set the timer to. 0 means disabled.

◆ setOutsideQuiet()

void IRFujitsuAC::setOutsideQuiet ( const bool on )

Set the Outside Quiet mode of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setPower()

void IRFujitsuAC::setPower ( const bool on )

Change the power setting.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setRaw()

bool IRFujitsuAC::setRaw	(	const uint8_t	newState[],
		const uint16_t	length
	)

Set the internal state from a valid code for this protocol.

Parameters

[in]	newState	A valid code for this protocol.
[in]	length	Size of the newState array.

Returns: true, if successful; Otherwise false. (i.e. size check)

◆ setSleepTimer()

void IRFujitsuAC::setSleepTimer ( const uint16_t nr_mins )

Set the Sleep Timer time for the A/C.

Parameters

[in] nr_mins Nr. of minutes to set the timer to. 0 means disabled.

◆ setSwing()

void IRFujitsuAC::setSwing ( const uint8_t swingMode )

Set the requested swing operation mode of the A/C unit.

Parameters

[in] swingMode The swingMode code for the A/C. Vertical, Horizon, or Both. See constants for details.

Note: Not all models support all possible swing modes.

◆ setTemp()

void IRFujitsuAC::setTemp ( const uint8_t temp )

Set the temperature.

Parameters

[in] temp The temperature in degrees celsius.

◆ setTimerType()

void IRFujitsuAC::setTimerType ( const uint8_t timertype )

Set the Timer type of the A/C message.

Parameters

[in] timertype The kind of timer to use for the message.

◆ stateReset()

void IRFujitsuAC::stateReset ( void )

Reset the state of the remote to a known good state/sequence.

◆ stepHoriz()

void IRFujitsuAC::stepHoriz ( void )

Request the A/C to step the Horizontal Swing.

◆ stepVert()

void IRFujitsuAC::stepVert ( void )

Request the A/C to step the Vertical Swing.

◆ toCommon()

stdAc::state_t IRFujitsuAC::toCommon ( void )

Convert the current internal state into its stdAc::state_t equivalent.

Returns: The stdAc equivalent of the native settings.

◆ toCommonFanSpeed()

stdAc::fanspeed_t IRFujitsuAC::toCommonFanSpeed ( const uint8_t speed )

static

Convert a native fan speed into its stdAc equivalent.

Parameters

[in] speed The native setting to be converted.

Returns: The stdAc equivalent of the native setting.

◆ toCommonMode()

stdAc::opmode_t IRFujitsuAC::toCommonMode ( const uint8_t mode )

static

Convert a native mode into its stdAc equivalent.

Parameters

[in] mode The native setting to be converted.

Returns: The stdAc equivalent of the native setting.

◆ toggleSwingHoriz()

void IRFujitsuAC::toggleSwingHoriz ( const bool update = true )

Request the A/C to toggle the Horizontal Swing mode.

Parameters

[in] update Do we need to update the general swing config?

◆ toggleSwingVert()

void IRFujitsuAC::toggleSwingVert ( const bool update = true )

Request the A/C to toggle the Vertical Swing mode.

Parameters

[in] update Do we need to update the general swing config?

◆ toString()

String IRFujitsuAC::toString ( void )

Convert the current internal state into a human readable string.

Returns: A human readable string.

◆ validChecksum()

bool IRFujitsuAC::validChecksum	(	uint8_t *	state,
		const uint16_t	length
	)

static

Verify the checksum is valid for a given state.

Parameters

[in]	state	The array to verify the checksum of.
[in]	length	The length of the state array.

Returns: true, if the state has a valid checksum. Otherwise, false.

Member Data Documentation

◆ _clean

bool IRFujitsuAC::_clean

private

◆ _cmd

uint8_t IRFujitsuAC::_cmd

private

◆ _fanSpeed

uint8_t IRFujitsuAC::_fanSpeed

private

◆ _filter

bool IRFujitsuAC::_filter

private

◆ _irsend

IRsend IRFujitsuAC::_irsend

private

Instance of the IR send class.

◆ _mode

uint8_t IRFujitsuAC::_mode

private

◆ _model

fujitsu_ac_remote_model_t IRFujitsuAC::_model

private

◆ _offtimer

uint16_t IRFujitsuAC::_offtimer

private

◆ _ontimer

uint16_t IRFujitsuAC::_ontimer

private

◆ _outsideQuiet

bool IRFujitsuAC::_outsideQuiet

private

◆ _state_length

uint8_t IRFujitsuAC::_state_length

private

◆ _state_length_short

uint8_t IRFujitsuAC::_state_length_short

private

◆ _swingMode

uint8_t IRFujitsuAC::_swingMode

private

◆ _temp

uint8_t IRFujitsuAC::_temp

private

◆ _timertype

uint8_t IRFujitsuAC::_timertype

private

◆ remote_state

uint8_t IRFujitsuAC::remote_state[kFujitsuAcStateLength]

private

The state of the IR remote.

The documentation for this class was generated from the following files:

src/ir_Fujitsu.h
src/ir_Fujitsu.cpp

Public Member Functions

Static Public Member Functions

Private Member Functions

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ IRFujitsuAC()

Member Function Documentation

◆ begin()

◆ buildFromState()

◆ buildState()

◆ calibrate()

◆ convertFan()

◆ convertMode()

◆ getClean()

◆ getCmd()

◆ getFanSpeed()

◆ getFilter()

◆ getMode()

◆ getModel()

◆ getOffSleepTimer()

◆ getOnTimer()

◆ getOutsideQuiet()

◆ getPower()

◆ getRaw()

◆ getStateLength()

◆ getSwing()

◆ getTemp()

◆ getTimerType()

◆ off()

◆ on()

◆ send()

◆ setClean()

◆ setCmd()

◆ setFanSpeed()

◆ setFilter()

◆ setMode()

◆ setModel()

◆ setOffSleepTimer()

◆ setOffTimer()

◆ setOnTimer()

◆ setOutsideQuiet()

◆ setPower()

◆ setRaw()

◆ setSleepTimer()

◆ setSwing()

◆ setTemp()

◆ setTimerType()

◆ stateReset()

◆ stepHoriz()

◆ stepVert()

◆ toCommon()

◆ toCommonFanSpeed()

◆ toCommonMode()

◆ toggleSwingHoriz()

◆ toggleSwingVert()

◆ toString()

◆ validChecksum()

Member Data Documentation

◆ _clean

◆ _cmd

◆ _fanSpeed

◆ _filter

◆ _irsend

◆ _mode

◆ _model

◆ _offtimer

◆ _ontimer

◆ _outsideQuiet

◆ _state_length

◆ _state_length_short

◆ _swingMode

◆ _temp

◆ _timertype

◆ remote_state