Class for handling detailed Transcold A/C messages. More...

#include <ir_Transcold.h>

Collaboration diagram for IRTranscoldAc:

Public Member Functions
	IRTranscoldAc (const uint16_t pin, const bool inverted=false, const bool use_modulation=true)
	Class constructor. More...

void	stateReset ()
	Reset the internal state to a fixed known good state. More...

void	send (const uint16_t repeat=kTranscoldDefaultRepeat)
	Send the current internal state as an IR message. More...

int8_t	calibrate (void)
	Run the calibration to calculate uSec timing offsets for this platform. More...

void	begin ()
	Set up hardware to be able to send a message. More...

void	on ()
	Change the power setting to On. More...

void	off ()
	Change the power setting to Off. More...

void	setPower (const bool state)
	Change the power setting. More...

bool	getPower ()
	Get the value of the current power setting. More...

void	setTemp (const uint8_t temp)
	Set the temperature. More...

uint8_t	getTemp ()
	Get the current temperature setting. More...

void	setFan (const uint8_t speed, const bool modecheck=true)
	Set the speed of the fan. More...

uint8_t	getFan ()
	Get the current fan speed setting. More...

void	setMode (const uint8_t mode)
	Set the operating mode of the A/C. More...

uint8_t	getMode ()
	Get the operating mode setting of the A/C. More...

void	setSwing ()
	Toggle the Swing mode of the A/C. More...

bool	getSwing ()
	Get the Swing setting of the A/C. More...

uint32_t	getRaw ()
	Get a copy of the internal state as a valid code for this protocol. More...

void	setRaw (const uint32_t new_code)
	Set the internal state from a valid code for this protocol. More...

uint8_t	convertMode (const stdAc::opmode_t mode)
	Convert a standard A/C mode into its native mode. More...

uint8_t	convertFan (const stdAc::fanspeed_t speed)
	Convert a stdAc::fanspeed_t enum into it's native speed. More...

stdAc::state_t	toCommon (const stdAc::state_t *prev=NULL)
	Convert the A/C state to it's common stdAc::state_t equivalent. More...

String	toString ()
	Convert the internal state into a human readable string. More...

Static Public Member Functions
static stdAc::opmode_t	toCommonMode (const uint8_t mode)
	Convert a native mode to it's common stdAc::opmode_t equivalent. More...

static stdAc::fanspeed_t	toCommonFanSpeed (const uint8_t speed)
	Convert a native fan speed into its stdAc equivalent. More...

Private Member Functions
void	setTempRaw (const uint8_t code)
	Set the raw (native) temperature value. More...

uint8_t	getTempRaw ()
	Get the raw (native) temperature value. More...

bool	isSpecialState (void)
	Is the current state is a special state? More...

bool	handleSpecialState (const uint32_t data)
	Adjust any internal settings based on the type of special state we are supplied. Does nothing if it isn't a special state. More...

void	updateSavedState (void)
	Backup the current internal state as long as it isn't a special state. More...

void	recoverSavedState (void)
	Restore the current internal state from backup as long as it isn't a special state. More...

uint32_t	getNormalState (void)

Private Attributes
IRsend	_irsend
	Instance of the IR send class. More...

bool	powerFlag

bool	swingFlag

bool	swingHFlag

bool	swingVFlag

uint32_t	remote_state
	The state of the IR remote in IR code form. More...

uint32_t	saved_state
	Copy of the state if we required a special mode. More...

Detailed Description

Class for handling detailed Transcold A/C messages.

Constructor & Destructor Documentation

◆ IRTranscoldAc()

IRTranscoldAc::IRTranscoldAc	(	const uint16_t	pin,
		const bool	inverted = `false`,
		const bool	use_modulation = `true`
	)

explicit

Class constructor.

Parameters

[in]	pin	GPIO to be used when sending.
[in]	inverted	Is the output signal to be inverted?
[in]	use_modulation	Is frequency modulation to be used?

Member Function Documentation

◆ begin()

void IRTranscoldAc::begin ( )

Set up hardware to be able to send a message.

◆ calibrate()

int8_t IRTranscoldAc::calibrate ( void )

inline

Run the calibration to calculate uSec timing offsets for this platform.

Returns: The uSec timing offset needed per modulation of the IR Led.

Note: This will produce a 65ms IR signal pulse at 38kHz. Only ever needs to be run once per object instantiation, if at all.

◆ convertFan()

uint8_t IRTranscoldAc::convertFan ( const stdAc::fanspeed_t speed )

Convert a stdAc::fanspeed_t enum into it's native speed.

Parameters

[in] speed The enum to be converted.

Returns: The native equivalent of the enum.

◆ convertMode()

uint8_t IRTranscoldAc::convertMode ( const stdAc::opmode_t mode )

Convert a standard A/C mode into its native mode.

Parameters

[in] mode A stdAc::opmode_t to be converted to it's native equivalent.

Returns: The corresponding native mode.

◆ getFan()

uint8_t IRTranscoldAc::getFan ( )

Get the current fan speed setting.

Returns: The current fan speed.

◆ getMode()

uint8_t IRTranscoldAc::getMode ( )

Get the operating mode setting of the A/C.

Returns: The current operating mode setting.

◆ getNormalState()

uint32_t IRTranscoldAc::getNormalState ( void )

private

◆ getPower()

bool IRTranscoldAc::getPower ( )

Get the value of the current power setting.

Returns: true, the setting is on. false, the setting is off.

◆ getRaw()

uint32_t IRTranscoldAc::getRaw ( )

Get a copy of the internal state as a valid code for this protocol.

Returns: A valid code for this protocol based on the current internal state.

◆ getSwing()

bool IRTranscoldAc::getSwing ( )

Get the Swing setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getTemp()

uint8_t IRTranscoldAc::getTemp ( )

Get the current temperature setting.

Returns: The current setting for temp. in degrees celsius.

◆ getTempRaw()

uint8_t IRTranscoldAc::getTempRaw ( )

private

Get the raw (native) temperature value.

Returns: The native temperature value.

◆ handleSpecialState()

bool IRTranscoldAc::handleSpecialState ( const uint32_t data )

private

Adjust any internal settings based on the type of special state we are supplied. Does nothing if it isn't a special state.

Parameters

[in] data The state we need to act upon.

Note: Special state means commands that are not affecting Temperature/Mode/Fan

Returns: true, if it is a special state. false if it isn't.

◆ isSpecialState()

bool IRTranscoldAc::isSpecialState ( void )

private

Is the current state is a special state?

Returns: true, if it is. false if it isn't.

◆ off()

void IRTranscoldAc::off ( )

Change the power setting to Off.

◆ on()

void IRTranscoldAc::on ( )

Change the power setting to On.

◆ recoverSavedState()

void IRTranscoldAc::recoverSavedState ( void )

private

Restore the current internal state from backup as long as it isn't a special state.

◆ send()

void IRTranscoldAc::send ( const uint16_t repeat = kTranscoldDefaultRepeat )

Send the current internal state as an IR message.

Parameters

[in] repeat Nr. of times the message will be repeated.

◆ setFan()

void IRTranscoldAc::setFan	(	const uint8_t	speed,
		const bool	modecheck = `true`
	)

Set the speed of the fan.

Parameters

[in]	speed	The desired setting.
[in]	modecheck	Do we enforce any mode limitations before setting?

◆ setMode()

void IRTranscoldAc::setMode ( const uint8_t mode )

Set the operating mode of the A/C.

Parameters

[in] mode The desired operating mode.

◆ setPower()

void IRTranscoldAc::setPower ( const bool on )

Change the power setting.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setRaw()

void IRTranscoldAc::setRaw ( const uint32_t new_code )

Set the internal state from a valid code for this protocol.

Parameters

[in] new_code A valid code for this protocol.

◆ setSwing()

void IRTranscoldAc::setSwing ( )

Toggle the Swing mode of the A/C.

◆ setTemp()

void IRTranscoldAc::setTemp ( const uint8_t desired )

Set the temperature.

Parameters

[in] desired The temperature in degrees celsius.

◆ setTempRaw()

void IRTranscoldAc::setTempRaw ( const uint8_t code )

private

Set the raw (native) temperature value.

Note: Bypasses any checks.

Parameters

[in] code The desired native temperature.

◆ stateReset()

void IRTranscoldAc::stateReset ( )

Reset the internal state to a fixed known good state.

◆ toCommon()

stdAc::state_t IRTranscoldAc::toCommon ( const stdAc::state_t * prev = NULL )

Convert the A/C state to it's common stdAc::state_t equivalent.

Parameters

[in] prev Ptr to the previous state if required.

Returns: A stdAc::state_t state.

◆ toCommonFanSpeed()

stdAc::fanspeed_t IRTranscoldAc::toCommonFanSpeed ( const uint8_t speed )

static

Convert a native fan speed into its stdAc equivalent.

Parameters

[in] speed The native setting to be converted.

Returns: The stdAc equivalent of the native setting.

◆ toCommonMode()

stdAc::opmode_t IRTranscoldAc::toCommonMode ( const uint8_t mode )

static

Convert a native mode to it's common stdAc::opmode_t equivalent.

Parameters

[in] mode A native operation mode to be converted.

Returns: The corresponding common stdAc::opmode_t mode.

◆ toString()

String IRTranscoldAc::toString ( )

Convert the internal state into a human readable string.

Returns: The current internal state expressed as a human readable String.

◆ updateSavedState()

void IRTranscoldAc::updateSavedState ( void )

private

Backup the current internal state as long as it isn't a special state.

Note: : Must be called before every special state to make sure the remote_state is safe

Member Data Documentation

◆ _irsend

IRsend IRTranscoldAc::_irsend

private

Instance of the IR send class.

◆ powerFlag

bool IRTranscoldAc::powerFlag

private

◆ remote_state

uint32_t IRTranscoldAc::remote_state

private

The state of the IR remote in IR code form.

◆ saved_state

uint32_t IRTranscoldAc::saved_state

private

Copy of the state if we required a special mode.

◆ swingFlag

bool IRTranscoldAc::swingFlag

private

◆ swingHFlag

bool IRTranscoldAc::swingHFlag

private

◆ swingVFlag

bool IRTranscoldAc::swingVFlag

private

The documentation for this class was generated from the following files:

src/ir_Transcold.h
src/ir_Transcold.cpp

Public Member Functions

Static Public Member Functions

Private Member Functions

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ IRTranscoldAc()

Member Function Documentation

◆ begin()

◆ calibrate()

◆ convertFan()

◆ convertMode()

◆ getFan()

◆ getMode()

◆ getNormalState()

◆ getPower()

◆ getRaw()

◆ getSwing()

◆ getTemp()

◆ getTempRaw()

◆ handleSpecialState()

◆ isSpecialState()

◆ off()

◆ on()

◆ recoverSavedState()

◆ send()

◆ setFan()

◆ setMode()

◆ setPower()

◆ setRaw()

◆ setSwing()

◆ setTemp()

◆ setTempRaw()

◆ stateReset()

◆ toCommon()

◆ toCommonFanSpeed()

◆ toCommonMode()

◆ toString()

◆ updateSavedState()

Member Data Documentation

◆ _irsend

◆ powerFlag

◆ remote_state

◆ saved_state

◆ swingFlag

◆ swingHFlag

◆ swingVFlag