Class for handling detailed Sharp A/C messages. More...

#include <ir_Sharp.h>

Collaboration diagram for IRSharpAc:

Public Member Functions
	IRSharpAc (const uint16_t pin, const bool inverted=false, const bool use_modulation=true)
	Class constructor. More...

void	send (const uint16_t repeat=kSharpAcDefaultRepeat)
	Send the current internal state as an IR message. More...

int8_t	calibrate (void)
	Run the calibration to calculate uSec timing offsets for this platform. More...

void	begin (void)
	Set up hardware to be able to send a message. More...

void	setModel (const sharp_ac_remote_model_t model)
	Set the model of the A/C to emulate. More...

sharp_ac_remote_model_t	getModel (const bool raw=false) const
	Get/Detect the model of the A/C. More...

void	on (void)
	Set the requested power state of the A/C to on. More...

void	off (void)
	Set the requested power state of the A/C to off. More...

void	setPower (const bool on, const bool prev_on=true)
	Change the power setting, including the previous power state. More...

bool	getPower (void) const
	Get the value of the current power setting. More...

bool	isPowerSpecial (void) const
	Is one of the special power states in use? More...

void	setTemp (const uint8_t temp, const bool save=true)
	Set the temperature. More...

uint8_t	getTemp (void) const
	Get the current temperature setting. More...

void	setFan (const uint8_t fan, const bool save=true)
	Set the speed of the fan. More...

uint8_t	getFan (void) const
	Get the current fan speed setting. More...

void	setMode (const uint8_t mode, const bool save=true)
	Set the operating mode of the A/C. More...

uint8_t	getMode (void) const
	Get the operating mode setting of the A/C. More...

void	setSpecial (const uint8_t mode)
	Set the value of the Special (button/command?) setting. More...

uint8_t	getSpecial (void) const
	Get the value of the Special (button/command?) setting. More...

bool	getTurbo (void) const
	Get the Turbo setting of the A/C. More...

void	setTurbo (const bool on)
	Set the Turbo setting of the A/C. More...

bool	getSwingToggle (void) const
	Get the (vertical) Swing Toggle setting of the A/C. More...

void	setSwingToggle (const bool on)
	Set the (vertical) Swing Toggle setting of the A/C. More...

bool	getIon (void) const
	Get the Ion (Filter) setting of the A/C. More...

void	setIon (const bool on)
	Set the Ion (Filter) setting of the A/C. More...

bool	getEconoToggle (void) const
	Get the Economical mode toggle setting of the A/C. More...

void	setEconoToggle (const bool on)
	Set the Economical mode toggle setting of the A/C. More...

bool	getLightToggle (void) const
	Get the Light toggle setting of the A/C. More...

void	setLightToggle (const bool on)
	Set the Light mode toggle setting of the A/C. More...

uint16_t	getTimerTime (void) const
	Get how long the timer is set for, in minutes. More...

bool	getTimerEnabled (void) const
	Is the Timer enabled? More...

bool	getTimerType (void) const
	Get the current timer type. More...

void	setTimer (bool enable, bool timer_type, uint16_t mins)
	Set or cancel the timer function. More...

bool	getClean (void) const
	Get the Clean setting of the A/C. More...

void	setClean (const bool on)
	Set the Economical mode toggle setting of the A/C. More...

uint8_t *	getRaw (void)
	Get a PTR to the internal state/code for this protocol. More...

void	setRaw (const uint8_t new_code[], const uint16_t length=kSharpAcStateLength)
	Set the internal state from a valid code for this protocol. More...

stdAc::opmode_t	toCommonMode (const uint8_t mode) const
	Convert a native mode into its stdAc equivalent. More...

stdAc::fanspeed_t	toCommonFanSpeed (const uint8_t speed) const
	Convert a native fan speed into its stdAc equivalent. More...

stdAc::state_t	toCommon (void) const
	Convert the current internal state into its stdAc::state_t equivalent. More...

String	toString (void) const
	Convert the current internal state into a human readable string. More...

Static Public Member Functions
static bool	validChecksum (uint8_t state[], const uint16_t length=kSharpAcStateLength)
	Verify the checksum is valid for a given state. More...

static uint8_t	convertMode (const stdAc::opmode_t mode)
	Convert a stdAc::opmode_t enum into its native mode. More...

static uint8_t	convertFan (const stdAc::fanspeed_t speed, const sharp_ac_remote_model_t model=sharp_ac_remote_model_t::A907)
	Convert a stdAc::fanspeed_t enum into it's native speed. More...

Private Member Functions
void	stateReset (void)
	Reset the state of the remote to a known good state/sequence. More...

void	checksum (void)
	Calculate and set the checksum values for the internal state. More...

void	setPowerSpecial (const uint8_t value)
	Set the value of the Power Special setting without any checks. More...

uint8_t	getPowerSpecial (void) const
	Get the value of the Power Special setting. More...

void	clearPowerSpecial (void)
	Clear the "special"/non-normal bits in the power section. e.g. for normal/common command modes. More...

bool	_getEconoToggle (void) const
	Get the Economical mode toggle setting of the A/C. More...

void	_setEconoToggle (const bool on)
	Set the Economical mode toggle setting of the A/C. More...

Static Private Member Functions
static uint8_t	calcChecksum (uint8_t state[], const uint16_t length=kSharpAcStateLength)
	Calculate the checksum for a given state. More...

Private Attributes
IRsend	_irsend
	Instance of the IR send class. More...

SharpProtocol	_

uint8_t	_temp
	Saved copy of the desired temp. More...

uint8_t	_mode
	Saved copy of the desired mode. More...

uint8_t	_fan
	Saved copy of the desired fan speed. More...

sharp_ac_remote_model_t	_model
	Saved copy of the model. More...

Detailed Description

Class for handling detailed Sharp A/C messages.

Constructor & Destructor Documentation

◆ IRSharpAc()

IRSharpAc::IRSharpAc	(	const uint16_t	pin,
		const bool	inverted = `false`,
		const bool	use_modulation = `true`
	)

explicit

Class constructor.

Parameters

[in]	pin	GPIO to be used when sending.
[in]	inverted	Is the output signal to be inverted?
[in]	use_modulation	Is frequency modulation to be used?

Member Function Documentation

◆ _getEconoToggle()

bool IRSharpAc::_getEconoToggle ( void ) const

private

Get the Economical mode toggle setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

Note: Shares the same location as the Light setting on A705.

◆ _setEconoToggle()

void IRSharpAc::_setEconoToggle ( const bool on )

private

Set the Economical mode toggle setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

Warning: Probably incompatible with setTurbo()

Note: Shares the same location as the Light setting on A705.

◆ begin()

void IRSharpAc::begin ( void )

Set up hardware to be able to send a message.

◆ calcChecksum()

uint8_t IRSharpAc::calcChecksum	(	uint8_t	state[],
		const uint16_t	length = `kSharpAcStateLength`
	)

staticprivate

Calculate the checksum for a given state.

Parameters

[in]	state	The array to calc the checksum of.
[in]	length	The length/size of the array.

Returns: The calculated 4-bit checksum value.

◆ calibrate()

int8_t IRSharpAc::calibrate ( void )

inline

Run the calibration to calculate uSec timing offsets for this platform.

Returns: The uSec timing offset needed per modulation of the IR Led.

Note: This will produce a 65ms IR signal pulse at 38kHz. Only ever needs to be run once per object instantiation, if at all.

◆ checksum()

void IRSharpAc::checksum ( void )

private

Calculate and set the checksum values for the internal state.

◆ clearPowerSpecial()

void IRSharpAc::clearPowerSpecial ( void )

private

Clear the "special"/non-normal bits in the power section. e.g. for normal/common command modes.

◆ convertFan()

uint8_t IRSharpAc::convertFan	(	const stdAc::fanspeed_t	speed,
		const sharp_ac_remote_model_t	model = `sharp_ac_remote_model_t::A907`
	)

static

Convert a stdAc::fanspeed_t enum into it's native speed.

Parameters

[in]	speed	The enum to be converted.
[in]	model	The enum of the appropriate model.

Returns: The native equivalent of the enum.

◆ convertMode()

uint8_t IRSharpAc::convertMode ( const stdAc::opmode_t mode )

static

Convert a stdAc::opmode_t enum into its native mode.

Parameters

[in] mode The enum to be converted.

Returns: The native equivalent of the enum.

◆ getClean()

bool IRSharpAc::getClean ( void ) const

Get the Clean setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getEconoToggle()

bool IRSharpAc::getEconoToggle ( void ) const

Get the Economical mode toggle setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

Note: Available on the A907 models.

◆ getFan()

uint8_t IRSharpAc::getFan ( void ) const

Get the current fan speed setting.

Returns: The current fan speed/mode.

◆ getIon()

bool IRSharpAc::getIon ( void ) const

Get the Ion (Filter) setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getLightToggle()

bool IRSharpAc::getLightToggle ( void ) const

Get the Light toggle setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

Note: Not available on the A907 model.

◆ getMode()

uint8_t IRSharpAc::getMode ( void ) const

Get the operating mode setting of the A/C.

Returns: The current operating mode setting.

◆ getModel()

sharp_ac_remote_model_t IRSharpAc::getModel ( const bool raw = false ) const

Get/Detect the model of the A/C.

Parameters

[in] raw Try to determine the model from the raw code only.

Returns: The enum of the compatible model.

◆ getPower()

bool IRSharpAc::getPower ( void ) const

Get the value of the current power setting.

Returns: true, the setting is on. false, the setting is off.

◆ getPowerSpecial()

uint8_t IRSharpAc::getPowerSpecial ( void ) const

private

Get the value of the Power Special setting.

Returns: The setting's value.

◆ getRaw()

uint8_t * IRSharpAc::getRaw ( void )

Get a PTR to the internal state/code for this protocol.

Returns: PTR to a code for this protocol based on the current internal state.

◆ getSpecial()

uint8_t IRSharpAc::getSpecial ( void ) const

Get the value of the Special (button/command?) setting.

Returns: The setting's value.

◆ getSwingToggle()

bool IRSharpAc::getSwingToggle ( void ) const

Get the (vertical) Swing Toggle setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getTemp()

uint8_t IRSharpAc::getTemp ( void ) const

Get the current temperature setting.

Returns: The current setting for temp. in degrees celsius.

◆ getTimerEnabled()

bool IRSharpAc::getTimerEnabled ( void ) const

Is the Timer enabled?

Returns: true, the setting is on. false, the setting is off.

◆ getTimerTime()

uint16_t IRSharpAc::getTimerTime ( void ) const

Get how long the timer is set for, in minutes.

Returns: The time in nr of minutes.

◆ getTimerType()

bool IRSharpAc::getTimerType ( void ) const

Get the current timer type.

Returns: true, It's an "On" timer. false, It's an "Off" timer.

◆ getTurbo()

bool IRSharpAc::getTurbo ( void ) const

Get the Turbo setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ isPowerSpecial()

bool IRSharpAc::isPowerSpecial ( void ) const

Is one of the special power states in use?

Returns: true, it is. false, it isn't.

◆ off()

void IRSharpAc::off ( void )

Set the requested power state of the A/C to off.

◆ on()

void IRSharpAc::on ( void )

Set the requested power state of the A/C to on.

◆ send()

void IRSharpAc::send ( const uint16_t repeat = kSharpAcDefaultRepeat )

Send the current internal state as an IR message.

Parameters

[in] repeat Nr. of times the message will be repeated.

◆ setClean()

void IRSharpAc::setClean ( const bool on )

Set the Economical mode toggle setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

Note: Officially A/C unit needs to be "Off" before clean mode can be entered

◆ setEconoToggle()

void IRSharpAc::setEconoToggle ( const bool on )

Set the Economical mode toggle setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

Warning: Probably incompatible with setTurbo()

Note: Available on the A907 models.

◆ setFan()

void IRSharpAc::setFan	(	const uint8_t	speed,
		const bool	save = `true`
	)

Set the speed of the fan.

Parameters

[in]	speed	The desired setting.
[in]	save	Do we save this setting as a user set one?

◆ setIon()

void IRSharpAc::setIon ( const bool on )

Set the Ion (Filter) setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setLightToggle()

void IRSharpAc::setLightToggle ( const bool on )

Set the Light mode toggle setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

Warning: Probably incompatible with setTurbo()

Note: Not available on the A907 model.

◆ setMode()

void IRSharpAc::setMode	(	const uint8_t	mode,
		const bool	save = `true`
	)

Set the operating mode of the A/C.

Parameters

[in]	mode	The desired operating mode.
[in]	save	Do we save this setting as a user set one?

◆ setModel()

void IRSharpAc::setModel ( const sharp_ac_remote_model_t model )

Set the model of the A/C to emulate.

Parameters

[in] model The enum of the appropriate model.

◆ setPower()

void IRSharpAc::setPower	(	const bool	on,
		const bool	prev_on = `true`
	)

Change the power setting, including the previous power state.

Parameters

[in]	on	true, the setting is on. false, the setting is off.
[in]	prev_on	true, the setting is on. false, the setting is off.

◆ setPowerSpecial()

void IRSharpAc::setPowerSpecial ( const uint8_t value )

inlineprivate

Set the value of the Power Special setting without any checks.

Parameters

[in] value The value to set Power Special to.

◆ setRaw()

void IRSharpAc::setRaw	(	const uint8_t	new_code[],
		const uint16_t	length = `kSharpAcStateLength`
	)

Set the internal state from a valid code for this protocol.

Parameters

[in]	new_code	A valid code for this protocol.
[in]	length	The length/size of the new_code array.

◆ setSpecial()

void IRSharpAc::setSpecial ( const uint8_t mode )

Set the value of the Special (button/command?) setting.

Parameters

[in] mode The value to set Special to.

◆ setSwingToggle()

void IRSharpAc::setSwingToggle ( const bool on )

Set the (vertical) Swing Toggle setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setTemp()

void IRSharpAc::setTemp	(	const uint8_t	temp,
		const bool	save = `true`
	)

Set the temperature.

Parameters

[in]	temp	The temperature in degrees celsius.
[in]	save	Do we save this setting as a user set one?

◆ setTimer()

void IRSharpAc::setTimer	(	bool	enable,
		bool	timer_type,
		uint16_t	mins
	)

Set or cancel the timer function.

Parameters

[in]	enable	Is the timer to be enabled (true) or canceled(false)?
[in]	timer_type	An On (true) or an Off (false). Ignored if canceled.
[in]	mins	Nr. of minutes the timer is to be set to.

Note: Rounds down to 30 min increments. (max: 720 mins (12h), 0 is Off)

◆ setTurbo()

void IRSharpAc::setTurbo ( const bool on )

Set the Turbo setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

Note: If you use this method, you will need to send it before making other changes to the settings, as they may overwrite some of the bits used by this setting.

◆ stateReset()

void IRSharpAc::stateReset ( void )

private

Reset the state of the remote to a known good state/sequence.

◆ toCommon()

stdAc::state_t IRSharpAc::toCommon ( void ) const

Convert the current internal state into its stdAc::state_t equivalent.

Returns: The stdAc equivalent of the native settings.

◆ toCommonFanSpeed()

stdAc::fanspeed_t IRSharpAc::toCommonFanSpeed ( const uint8_t speed ) const

Convert a native fan speed into its stdAc equivalent.

Parameters

[in] speed The native setting to be converted.

Returns: The stdAc equivalent of the native setting.

◆ toCommonMode()

stdAc::opmode_t IRSharpAc::toCommonMode ( const uint8_t mode ) const

Convert a native mode into its stdAc equivalent.

Parameters

[in] mode The native setting to be converted.

Returns: The stdAc equivalent of the native setting.

◆ toString()

String IRSharpAc::toString ( void ) const

Convert the current internal state into a human readable string.

Returns: A human readable string.

◆ validChecksum()

bool IRSharpAc::validChecksum	(	uint8_t	state[],
		const uint16_t	length = `kSharpAcStateLength`
	)

static

Verify the checksum is valid for a given state.

Parameters

[in]	state	The array to verify the checksum of.
[in]	length	The length/size of the array.

Returns: true, if the state has a valid checksum. Otherwise, false.

Member Data Documentation

◆ _

SharpProtocol IRSharpAc::_

private

◆ _fan

uint8_t IRSharpAc::_fan

private

Saved copy of the desired fan speed.

◆ _irsend

IRsend IRSharpAc::_irsend

private

Instance of the IR send class.

◆ _mode

uint8_t IRSharpAc::_mode

private

Saved copy of the desired mode.

◆ _model

sharp_ac_remote_model_t IRSharpAc::_model

private

Saved copy of the model.

◆ _temp

uint8_t IRSharpAc::_temp

private

Saved copy of the desired temp.

The documentation for this class was generated from the following files:

src/ir_Sharp.h
src/ir_Sharp.cpp

Public Member Functions

Static Public Member Functions

Private Member Functions

Static Private Member Functions

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ IRSharpAc()

Member Function Documentation

◆ _getEconoToggle()

◆ _setEconoToggle()

◆ begin()

◆ calcChecksum()

◆ calibrate()

◆ checksum()

◆ clearPowerSpecial()

◆ convertFan()

◆ convertMode()

◆ getClean()

◆ getEconoToggle()

◆ getFan()

◆ getIon()

◆ getLightToggle()

◆ getMode()

◆ getModel()

◆ getPower()

◆ getPowerSpecial()

◆ getRaw()

◆ getSpecial()

◆ getSwingToggle()

◆ getTemp()

◆ getTimerEnabled()

◆ getTimerTime()

◆ getTimerType()

◆ getTurbo()

◆ isPowerSpecial()

◆ off()

◆ on()

◆ send()

◆ setClean()

◆ setEconoToggle()

◆ setFan()

◆ setIon()

◆ setLightToggle()

◆ setMode()

◆ setModel()

◆ setPower()

◆ setPowerSpecial()

◆ setRaw()

◆ setSpecial()

◆ setSwingToggle()

◆ setTemp()

◆ setTimer()

◆ setTurbo()

◆ stateReset()

◆ toCommon()

◆ toCommonFanSpeed()

◆ toCommonMode()

◆ toString()

◆ validChecksum()

Member Data Documentation

◆ _

◆ _fan

◆ _irsend

◆ _mode

◆ _model

◆ _temp