Class for handling detailed TCL A/C messages. More...

#include <ir_Tcl.h>

Collaboration diagram for IRTcl112Ac:

Public Member Functions
	IRTcl112Ac (const uint16_t pin, const bool inverted=false, const bool use_modulation=true)
	Class constructor. More...

void	send (const uint16_t repeat=kTcl112AcDefaultRepeat)
	Send the current internal state as an IR message. More...

int8_t	calibrate (void)
	Run the calibration to calculate uSec timing offsets for this platform. More...

void	begin (void)
	Set up hardware to be able to send a message. More...

void	stateReset (void)
	Reset the internal state of the emulation. (On, Cool, 24C) More...

uint8_t *	getRaw (void)
	Get a PTR to the internal state/code for this protocol. More...

void	setRaw (const uint8_t new_code[], const uint16_t length=kTcl112AcStateLength)
	Set the internal state from a valid code for this protocol. More...

void	on (void)
	Set the requested power state of the A/C to on. More...

void	off (void)
	Set the requested power state of the A/C to off. More...

void	setPower (const bool on)
	Change the power setting. More...

bool	getPower (void)
	Get the value of the current power setting. More...

void	setTemp (const float celsius)
	Set the temperature. More...

float	getTemp (void)
	Get the current temperature setting. More...

void	setMode (const uint8_t mode)
	Set the operating mode of the A/C. More...

uint8_t	getMode (void)
	Get the operating mode setting of the A/C. More...

void	setFan (const uint8_t speed)
	Set the speed of the fan. More...

uint8_t	getFan (void)
	Get the current fan speed setting. More...

void	setEcono (const bool on)
	Set the economy setting of the A/C. More...

bool	getEcono (void)
	Get the economy setting of the A/C. More...

void	setHealth (const bool on)
	Set the Health (Filter) setting of the A/C. More...

bool	getHealth (void)
	Get the Health (Filter) setting of the A/C. More...

void	setLight (const bool on)
	Set the Light (LED/Display) setting of the A/C. More...

bool	getLight (void)
	Get the Light (LED/Display) setting of the A/C. More...

void	setSwingHorizontal (const bool on)
	Set the horizontal swing setting of the A/C. More...

bool	getSwingHorizontal (void)
	Get the horizontal swing setting of the A/C. More...

void	setSwingVertical (const bool on)
	Set the vertical swing setting of the A/C. More...

bool	getSwingVertical (void)
	Get the vertical swing setting of the A/C. More...

void	setTurbo (const bool on)
	Set the Turbo setting of the A/C. More...

bool	getTurbo (void)
	Get the Turbo setting of the A/C. More...

uint8_t	convertMode (const stdAc::opmode_t mode)
	Convert a stdAc::opmode_t enum into its native mode. More...

uint8_t	convertFan (const stdAc::fanspeed_t speed)
	Convert a stdAc::fanspeed_t enum into it's native speed. More...

stdAc::state_t	toCommon (void)
	Convert the current internal state into its stdAc::state_t equivilant. More...

String	toString (void)
	Convert the current internal state into a human readable string. More...

Static Public Member Functions
static uint8_t	calcChecksum (uint8_t state[], const uint16_t length=kTcl112AcStateLength)
	Calculate the checksum for a given state. More...

static bool	validChecksum (uint8_t state[], const uint16_t length=kTcl112AcStateLength)
	Verify the checksum is valid for a given state. More...

static stdAc::opmode_t	toCommonMode (const uint8_t mode)
	Convert a native mode into its stdAc equivilant. More...

static stdAc::fanspeed_t	toCommonFanSpeed (const uint8_t speed)
	Convert a native fan speed into its stdAc equivilant. More...

Private Member Functions
void	checksum (const uint16_t length=kTcl112AcStateLength)
	Calculate & set the checksum for the current internal state of the remote. More...

Private Attributes
IRsend	_irsend
	Instance of the IR send class. More...

uint8_t	remote_state [kTcl112AcStateLength]
	The State in IR code form. More...

Detailed Description

Class for handling detailed TCL A/C messages.

Constructor & Destructor Documentation

◆ IRTcl112Ac()

IRTcl112Ac::IRTcl112Ac	(	const uint16_t	pin,
		const bool	inverted = `false`,
		const bool	use_modulation = `true`
	)

explicit

Class constructor.

Parameters

[in]	pin	GPIO to be used when sending.
[in]	inverted	Is the output signal to be inverted?
[in]	use_modulation	Is frequency modulation to be used?

Member Function Documentation

◆ begin()

void IRTcl112Ac::begin ( void )

Set up hardware to be able to send a message.

◆ calcChecksum()

uint8_t IRTcl112Ac::calcChecksum	(	uint8_t	state[],
		const uint16_t	length = `kTcl112AcStateLength`
	)

static

Calculate the checksum for a given state.

Parameters

[in]	state	The array to calc the checksum of.
[in]	length	The length/size of the array.

Returns: The calculated checksum value.

◆ calibrate()

int8_t IRTcl112Ac::calibrate ( void )

inline

Run the calibration to calculate uSec timing offsets for this platform.

Returns: The uSec timing offset needed per modulation of the IR Led.

Note: This will produce a 65ms IR signal pulse at 38kHz. Only ever needs to be run once per object instantiation, if at all.

◆ checksum()

void IRTcl112Ac::checksum ( const uint16_t length = kTcl112AcStateLength )

private

Calculate & set the checksum for the current internal state of the remote.

Parameters

[in] length The length/size of the internal array to checksum.

◆ convertFan()

uint8_t IRTcl112Ac::convertFan ( const stdAc::fanspeed_t speed )

Convert a stdAc::fanspeed_t enum into it's native speed.

Parameters

[in] speed The enum to be converted.

Returns: The native equivilant of the enum.

◆ convertMode()

uint8_t IRTcl112Ac::convertMode ( const stdAc::opmode_t mode )

Convert a stdAc::opmode_t enum into its native mode.

Parameters

[in] mode The enum to be converted.

Returns: The native equivilant of the enum.

◆ getEcono()

bool IRTcl112Ac::getEcono ( void )

Get the economy setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getFan()

uint8_t IRTcl112Ac::getFan ( void )

Get the current fan speed setting.

Returns: The current fan speed/mode.

◆ getHealth()

bool IRTcl112Ac::getHealth ( void )

Get the Health (Filter) setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getLight()

bool IRTcl112Ac::getLight ( void )

Get the Light (LED/Display) setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getMode()

uint8_t IRTcl112Ac::getMode ( void )

Get the operating mode setting of the A/C.

Returns: The current operating mode setting.

◆ getPower()

bool IRTcl112Ac::getPower ( void )

Get the value of the current power setting.

Returns: true, the setting is on. false, the setting is off.

◆ getRaw()

uint8_t * IRTcl112Ac::getRaw ( void )

Get a PTR to the internal state/code for this protocol.

Returns: PTR to a code for this protocol based on the current internal state.

◆ getSwingHorizontal()

bool IRTcl112Ac::getSwingHorizontal ( void )

Get the horizontal swing setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getSwingVertical()

bool IRTcl112Ac::getSwingVertical ( void )

Get the vertical swing setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ getTemp()

float IRTcl112Ac::getTemp ( void )

Get the current temperature setting.

Returns: The current setting for temp. in degrees celsius.

Note: The temperature resolution is 0.5 of a degree.

◆ getTurbo()

bool IRTcl112Ac::getTurbo ( void )

Get the Turbo setting of the A/C.

Returns: true, the setting is on. false, the setting is off.

◆ off()

void IRTcl112Ac::off ( void )

Set the requested power state of the A/C to off.

◆ on()

void IRTcl112Ac::on ( void )

Set the requested power state of the A/C to on.

◆ send()

void IRTcl112Ac::send ( const uint16_t repeat = kTcl112AcDefaultRepeat )

Send the current internal state as an IR message.

Parameters

[in] repeat Nr. of times the message will be repeated.

◆ setEcono()

void IRTcl112Ac::setEcono ( const bool on )

Set the economy setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setFan()

void IRTcl112Ac::setFan ( const uint8_t speed )

Set the speed of the fan.

Parameters

[in] speed The desired setting.

Note: Unknown speeds will default to Auto.

◆ setHealth()

void IRTcl112Ac::setHealth ( const bool on )

Set the Health (Filter) setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setLight()

void IRTcl112Ac::setLight ( const bool on )

Set the Light (LED/Display) setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setMode()

void IRTcl112Ac::setMode ( const uint8_t mode )

Set the operating mode of the A/C.

Parameters

[in] mode The desired operating mode.

Note: Fan/Ventilation mode sets the fan speed to high. Unknown values default to Auto.

◆ setPower()

void IRTcl112Ac::setPower ( const bool on )

Change the power setting.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setRaw()

void IRTcl112Ac::setRaw	(	const uint8_t	new_code[],
		const uint16_t	length = `kTcl112AcStateLength`
	)

Set the internal state from a valid code for this protocol.

Parameters

[in]	new_code	A valid code for this protocol.
[in]	length	The length/size of the new_code array.

◆ setSwingHorizontal()

void IRTcl112Ac::setSwingHorizontal ( const bool on )

Set the horizontal swing setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setSwingVertical()

void IRTcl112Ac::setSwingVertical ( const bool on )

Set the vertical swing setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ setTemp()

void IRTcl112Ac::setTemp ( const float celsius )

Set the temperature.

Parameters

[in] celsius The temperature in degrees celsius.

Note: The temperature resolution is 0.5 of a degree.

◆ setTurbo()

void IRTcl112Ac::setTurbo ( const bool on )

Set the Turbo setting of the A/C.

Parameters

[in] on true, the setting is on. false, the setting is off.

◆ stateReset()

void IRTcl112Ac::stateReset ( void )

Reset the internal state of the emulation. (On, Cool, 24C)

◆ toCommon()

stdAc::state_t IRTcl112Ac::toCommon ( void )

Convert the current internal state into its stdAc::state_t equivilant.

Returns: The stdAc equivilant of the native settings.

◆ toCommonFanSpeed()

stdAc::fanspeed_t IRTcl112Ac::toCommonFanSpeed ( const uint8_t spd )

static

Convert a native fan speed into its stdAc equivilant.

Parameters

[in] spd The native setting to be converted.

Returns: The stdAc equivilant of the native setting.

◆ toCommonMode()

stdAc::opmode_t IRTcl112Ac::toCommonMode ( const uint8_t mode )

static

Convert a native mode into its stdAc equivilant.

Parameters

[in] mode The native setting to be converted.

Returns: The stdAc equivilant of the native setting.

◆ toString()

String IRTcl112Ac::toString ( void )

Convert the current internal state into a human readable string.

Returns: A human readable string.

◆ validChecksum()

bool IRTcl112Ac::validChecksum	(	uint8_t	state[],
		const uint16_t	length = `kTcl112AcStateLength`
	)

static

Verify the checksum is valid for a given state.

Parameters

[in]	state	The array to verify the checksum of.
[in]	length	The length/size of the array.

Returns: true, if the state has a valid checksum. Otherwise, false.

Member Data Documentation

◆ _irsend

IRsend IRTcl112Ac::_irsend

private

Instance of the IR send class.

◆ remote_state

uint8_t IRTcl112Ac::remote_state[kTcl112AcStateLength]

private

The State in IR code form.

The documentation for this class was generated from the following files:

src/ir_Tcl.h
src/ir_Tcl.cpp

Public Member Functions

Static Public Member Functions

Private Member Functions

Private Attributes

Detailed Description

Constructor & Destructor Documentation

◆ IRTcl112Ac()

Member Function Documentation

◆ begin()

◆ calcChecksum()

◆ calibrate()

◆ checksum()

◆ convertFan()

◆ convertMode()

◆ getEcono()

◆ getFan()

◆ getHealth()

◆ getLight()

◆ getMode()

◆ getPower()

◆ getRaw()

◆ getSwingHorizontal()

◆ getSwingVertical()

◆ getTemp()

◆ getTurbo()

◆ off()

◆ on()

◆ send()

◆ setEcono()

◆ setFan()

◆ setHealth()

◆ setLight()

◆ setMode()

◆ setPower()

◆ setRaw()

◆ setSwingHorizontal()

◆ setSwingVertical()

◆ setTemp()

◆ setTurbo()

◆ stateReset()

◆ toCommon()

◆ toCommonFanSpeed()

◆ toCommonMode()

◆ toString()

◆ validChecksum()

Member Data Documentation

◆ _irsend

◆ remote_state