mirror of https://github.com/arendst/Tasmota.git
|
…
|
||
|---|---|---|
| .. | ||
| src | ||
| README.md | ||
| keywords.txt | ||
| library.properties | ||
README.md
ENS210
Arduino library for the ENS210 temperature & humidity sensor with I2C interface from ScioSense
Introduction
This project is an Arduino library. It implements a driver with examples for the ENS210. The ENS210 chip is a digital temperature & humidity sensor with an I2C interface. The driver in this Arduino library is based on the code supplied by Sciosense, the manufacturer of the chip.
Note that the ENS210 requires a supply voltage of 1.71V .. 1.98V.
Links
The ENS210 is made by Sciosense.
- The datasheet of the ENS210 is not yet released
Prerequisites
It is assumed that
- The Arduino IDE has been installed. If not, refer to "Install the Arduino Desktop IDE" on the Arduino site.
- The library directory is at its default location.
For me, Christoph, that is
C:\Users\christoph\Documents\Arduino\libraries.
Build an example
To build an example sketch
- (Re)start Arduino.
- Open File > Example > Examples from Custom Libraries > ENS210 > ENS210basic.
- Make sure Tools > Board lists the correct board.
- Select Sketch > Verify/Compile.