mirror of https://github.com/arendst/Tasmota.git
1254 lines
51 KiB
C
1254 lines
51 KiB
C
/*
|
|
cs-CZ.h - localization for Czech with diacritics - Czech for Tasmota
|
|
|
|
Copyright (C) 2021 Vladimír Synek
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef _LANGUAGE_CS_CZ_H_
|
|
#define _LANGUAGE_CS_CZ_H_
|
|
|
|
/*************************** ATTENTION *******************************\
|
|
*
|
|
* Due to memory constraints only UTF-8 is supported.
|
|
* To save code space keep text as short as possible.
|
|
* Time and Date provided by SDK can not be localized (yet).
|
|
* Use online command StateText to translate ON, OFF, HOLD and TOGGLE.
|
|
* Use online command Prefix to translate cmnd, stat and tele.
|
|
*
|
|
* Updated until v9.3.1.1
|
|
\*********************************************************************/
|
|
|
|
//#define LANGUAGE_MODULE_NAME // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English)
|
|
|
|
#define LANGUAGE_LCID 1029
|
|
// HTML (ISO 639-1) Language Code
|
|
#define D_HTML_LANGUAGE "cs"
|
|
|
|
// "2017-03-07T11:08:02" - ISO8601:2004
|
|
#define D_YEAR_MONTH_SEPARATOR "-"
|
|
#define D_MONTH_DAY_SEPARATOR "-"
|
|
#define D_DATE_TIME_SEPARATOR "T"
|
|
#define D_HOUR_MINUTE_SEPARATOR ":"
|
|
#define D_MINUTE_SECOND_SEPARATOR ":"
|
|
|
|
#define D_DAY3LIST "Ne Po Út St Čt Pá So "
|
|
#define D_MONTH3LIST "LedÚnoBřeDubKvěČvnČvcSrpZářŘíjLisPro"
|
|
|
|
// Non JSON decimal separator
|
|
#define D_DECIMAL_SEPARATOR ","
|
|
|
|
// Common
|
|
#define D_ABSOLUTE_HUMIDITY "Abs Humidity"
|
|
#define D_ADMIN "Admin"
|
|
#define D_AIR_QUALITY "Kvalita vzduchu"
|
|
#define D_AP "AP" // Access Point
|
|
#define D_AS "jako"
|
|
#define D_AUTO "AUTO"
|
|
#define D_BATTERY "Battery"
|
|
#define D_BATT "Batt" // Short for Battery
|
|
#define D_BATTERY_CHARGE "Charge" // Battery charge in %
|
|
#define D_BLINK "Blikání"
|
|
#define D_BLINKOFF "BlikáníVyp"
|
|
#define D_BOOT_COUNT "Počítadlo spuštění"
|
|
#define D_BRIGHTLIGHT "Světlý"
|
|
#define D_BSSID "BSSId"
|
|
#define D_BUTTON "Tlačítko"
|
|
#define D_BY "by" // Written by me
|
|
#define D_BYTES "Bytů"
|
|
#define D_CELSIUS "°C"
|
|
#define D_CHANNEL "Channel"
|
|
#define D_CO2 "CO2"
|
|
#define D_CODE "kód" // Button code
|
|
#define D_COLDLIGHT "Studené světlo"
|
|
#define D_COMMAND "Příkaz"
|
|
#define D_CONNECTED "...připojeno"
|
|
#define D_CORS_DOMAIN "CORS Domain"
|
|
#define D_COLOR "Color"
|
|
#define D_COUNT "Počítej"
|
|
#define D_COUNTER "Počítadlo"
|
|
#define D_CT_POWER "CT Power"
|
|
#define D_CURRENT "Proud" // As in Voltage and Current
|
|
#define D_CURRENT_NEUTRAL "Current Neutral"
|
|
#define D_DATA "Data"
|
|
#define D_DARKLIGHT "Tmavý"
|
|
#define D_DEBUG "Debug"
|
|
#define D_DEWPOINT "Dew point"
|
|
#define D_DISABLED "Zablokováno"
|
|
#define D_MOVING_DISTANCE "Moving Distance"
|
|
#define D_STATIC_DISTANCE "Static Distance"
|
|
#define D_DETECT_DISTANCE "Detect Distance"
|
|
#define D_DISTANCE "Distance"
|
|
#define D_DNS_SERVER "Server DNS"
|
|
#define D_DO "Disolved Oxygen"
|
|
#define D_DONE "Provedeno"
|
|
#define D_DST_TIME "DST"
|
|
#define D_EC "EC"
|
|
#define D_ECO2 "eCO₂"
|
|
#define D_EMULATION "Emulace"
|
|
#define D_ENABLED "Otevřený"
|
|
#define D_ERASE "Smaž"
|
|
#define D_ERROR "Chyba"
|
|
#define D_FAHRENHEIT "Fahrenheita"
|
|
#define D_FAILED "chyba"
|
|
#define D_FALLBACK "Záložní"
|
|
#define D_FALLBACK_TOPIC "Záložní topic"
|
|
#define D_FALSE "Nepravda"
|
|
#define D_FILE "Soubor"
|
|
#define D_FILE_SYSTEM_SIZE "File System Size"
|
|
#define D_FLOW_RATE "Flow rate"
|
|
#define D_FRAGMENTATION "frag." // Lower case abbreviated version of fragmentation used in "memory fragmentation"
|
|
#define D_FRAME_RATE "Frame rate"
|
|
#define D_FREE_MEMORY "Volná paměť"
|
|
#define D_PSR_MAX_MEMORY "PS-RAM Memory"
|
|
#define D_PSR_FREE_MEMORY "PS-RAM free Memory"
|
|
#define D_FREQUENCY "Kmitočet"
|
|
#define D_GAS "Plyn"
|
|
#define D_GATEWAY "Výchozí brána"
|
|
#define D_GROUP "Skupina"
|
|
#define D_HOST "Server"
|
|
#define D_HALL_EFFECT "Hall Effect"
|
|
#define D_HEATINDEX "Heat index"
|
|
#define D_HOSTNAME "Název serveru"
|
|
#define D_HUMIDITY "Vlhkost"
|
|
#define D_ILLUMINANCE "Osvětlení"
|
|
#define D_IMMEDIATE "Okamžité" // Button immediate
|
|
#define D_INDEX "Index"
|
|
#define D_INFO "Informace"
|
|
#define D_INFRARED "Infrared"
|
|
#define D_INITIALIZED "Inicializovaný"
|
|
#define D_IP_ADDRESS "Adresa IP"
|
|
#define D_LIGHT "Světlo"
|
|
#define D_LWT "LWT"
|
|
#define D_LQI "LQI" // Zigbee Link Quality Index
|
|
#define D_MODULE "Modul"
|
|
#define D_MOISTURE "Moisture"
|
|
#define D_MQTT "MQTT"
|
|
#define D_MULTI_PRESS "několikeré-stisknutí"
|
|
#define D_NOISE "Hluk"
|
|
#define D_NONE "Žádný"
|
|
#define D_NOX "NOx"
|
|
#define D_O2 "Oxygen"
|
|
#define D_OFF "Vyp."
|
|
#define D_OFFLINE "Offline" // Don't translate, LWT message! Nepředkládat, LWT zpráva!
|
|
#define D_OK "OK"
|
|
#define D_ON "Zap."
|
|
#define D_ONLINE "Online" // Don't translate, LWT message! Nepředkládat, LWT zpráva!
|
|
#define D_ORP "ORP"
|
|
#define D_PASSWORD "Heslo"
|
|
#define D_PH "pH"
|
|
#define D_MQ "MQ"
|
|
#define D_PARTITION "Partition" // As in flash and firmware partition
|
|
#define D_PORT "Port"
|
|
#define D_POWER_FACTOR "Účiník"
|
|
#define D_POWERUSAGE "Příkon"
|
|
#define D_POWERUSAGE_ACTIVE "Činný příkon"
|
|
#define D_POWERUSAGE_ACTIVE_TOTAL "Active Power Total"
|
|
#define D_POWERUSAGE_APPARENT "Zdánlivý příkon"
|
|
#define D_POWERUSAGE_REACTIVE "Jalový příkon"
|
|
#define D_PRESSURE "Tlak"
|
|
#define D_PRESSUREATSEALEVEL "Tlak na hladině moře"
|
|
#define D_PROGRAM_FLASH_SIZE "Velikost paměti flash"
|
|
#define D_PROGRAM_SIZE "Velikost programu"
|
|
#define D_PROJECT "Projekt"
|
|
#define D_RAIN "Rain"
|
|
#define D_RANGE "Range"
|
|
#define D_RECEIVED "Přijatý"
|
|
#define D_RESTART "Restart"
|
|
#define D_RESTARTING "Restartování"
|
|
#define D_RESTART_REASON "Příčina restartu"
|
|
#define D_RETAINED "Zachováno"
|
|
#define D_RULE "Rule"
|
|
#define D_SAVE "Ulož"
|
|
#define D_SENSOR "Sensor"
|
|
#define D_SSID "SSID"
|
|
#define D_START "Start"
|
|
#define D_STD_TIME "STD"
|
|
#define D_STOP "Stop"
|
|
#define D_SUBNET_MASK "Maska podsítě"
|
|
#define D_SUBSCRIBE_TO "Přihlaš se do"
|
|
#define D_UNSUBSCRIBE_FROM "Unsubscribe from"
|
|
#define D_SUCCESSFUL "úspěšné."
|
|
#define D_SUNRISE "Svítání"
|
|
#define D_SUNSET "Soumrak"
|
|
#define D_TEMPERATURE "Teplota"
|
|
#define D_TO "do"
|
|
#define D_TOGGLE "Přepni"
|
|
#define D_TOPIC "Topic"
|
|
#define D_TOTAL_USAGE "Total Usage"
|
|
#define D_TRANSMIT "Odešli"
|
|
#define D_TRUE "Pravda"
|
|
#define D_TVOC "TVOC"
|
|
#define D_TWILIGHT_ASTRONOMICAL "Astronomical"
|
|
#define D_TWILIGHT_CIVIL "Civil"
|
|
#define D_TWILIGHT_NAUTICAL "Nautical"
|
|
#define D_UPLOAD "Nahrání..."
|
|
#define D_UPTIME "Uptime"
|
|
#define D_USED "used"
|
|
#define D_USER "Uživatel"
|
|
#define D_UTC_TIME "UTC"
|
|
#define D_UV_INDEX "UV Index"
|
|
#define D_UV_INDEX_1 "Nízký"
|
|
#define D_UV_INDEX_2 "Střední"
|
|
#define D_UV_INDEX_3 "Vysoký"
|
|
#define D_UV_INDEX_4 "Nebezpečný"
|
|
#define D_UV_INDEX_5 "Popál1/2"
|
|
#define D_UV_INDEX_6 "Popál3"
|
|
#define D_UV_INDEX_7 "MimoRozsah"
|
|
#define D_UV_LEVEL "úroveň UV"
|
|
#define D_UV_POWER "UV Power"
|
|
#define D_VERSION "Verze"
|
|
#define D_VOC "VOC"
|
|
#define D_VOLTAGE "Napětí"
|
|
#define D_VOLUME "Volume"
|
|
#define D_WEIGHT "Hmotnost"
|
|
#define D_WARMLIGHT "Teplé světlo"
|
|
#define D_WEB_SERVER "Web Server"
|
|
#define D_SOC "State of Charge"
|
|
#define D_SOH "State of Health"
|
|
|
|
// tasmota.ino
|
|
#define D_WARNING_MINIMAL_VERSION "UPOZORNĚNÍ Tato verze nepodporuje trvalé nastavení"
|
|
#define D_LEVEL_10 "úroveň 1-0"
|
|
#define D_LEVEL_01 "úroveň 0-1"
|
|
#define D_SERIAL_LOGGING_DISABLED "Logování na sériovém portu ukončeno"
|
|
#define D_SYSLOG_LOGGING_REENABLED "Obnoven zápis do Syslog"
|
|
|
|
#define D_SET_BAUDRATE_TO "Nastavení rychlosti přenosu na"
|
|
#define D_RECEIVED_TOPIC "Přijatý topic"
|
|
#define D_DATA_SIZE "Velikost dat"
|
|
#define D_ANALOG_INPUT "Analogový vstup"
|
|
|
|
// support.ino
|
|
#define D_OSWATCH "osWatch"
|
|
#define D_BLOCKED_LOOP "Zablokování smyčky"
|
|
#define D_WPS_FAILED_WITH_STATUS "Chyba WPSconfig se statusem"
|
|
#define D_ACTIVE_FOR_3_MINUTES "aktivní 3 minuty"
|
|
#define D_FAILED_TO_START "nepodařilo se spustit"
|
|
#define D_PATCH_ISSUE_2186 "Chyba 2186"
|
|
#define D_CONNECTING_TO_AP "Připojování k AP"
|
|
#define D_IN_MODE "v módu"
|
|
#define D_CONNECT_FAILED_NO_IP_ADDRESS "Chyba připojení, nebyla obdržena IP adresa"
|
|
#define D_CONNECT_FAILED_AP_NOT_REACHED "Chyba připojení, nedostupný AP"
|
|
#define D_CONNECT_FAILED_WRONG_PASSWORD "Chyba připojení"
|
|
#define D_CONNECT_FAILED_AP_TIMEOUT "Chyba připojení, uplynul AP timeout"
|
|
#define D_ATTEMPTING_CONNECTION "Připojování..."
|
|
#define D_CHECKING_CONNECTION "Zkouška spojení..."
|
|
#define D_QUERY_DONE "Vyslání dotazu. Nalezena služba MQTT"
|
|
#define D_MQTT_SERVICE_FOUND "Služba MQTT byla nalezena"
|
|
#define D_FOUND_AT "znalezeno v"
|
|
#define D_SYSLOG_HOST_NOT_FOUND "Syslog Host nebyl nalezen"
|
|
|
|
// settings.ino
|
|
#define D_SAVED_TO_FLASH_AT "Uloženo do paměti flash v"
|
|
#define D_LOADED_FROM_FLASH_AT "Staženo z paměti flash z"
|
|
#define D_USE_DEFAULTS "Použij defaultní hodnoty"
|
|
#define D_ERASED_SECTOR "Smazaný sektor"
|
|
|
|
// xdrv_02_webserver.ino
|
|
#define D_NOSCRIPT "Pro používání prostředí Tasmota povolte JavaScript"
|
|
#define D_SAFEBOOT "SAFEBOOT"
|
|
#define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "Firmware MINIMÁLNÍ<br>prosím zaktualizujte"
|
|
#define D_WEBSERVER_ACTIVE_ON "Aktivní Web server"
|
|
#define D_WITH_IP_ADDRESS "na IP adrese"
|
|
#define D_WEBSERVER_STOPPED "Web server zastaven"
|
|
#define D_FILE_NOT_FOUND "Soubor nebyl nalezen"
|
|
#define D_REDIRECTED "Přesměrování na vlastní portál"
|
|
#define D_WIFIMANAGER_SET_ACCESSPOINT_AND_STATION "Wi-Fi manager nastaví AP a zachová STA"
|
|
#define D_WIFIMANAGER_SET_ACCESSPOINT "Wi-Fi manager nastaví Access Point"
|
|
#define D_TRYING_TO_CONNECT "Zkouším připojit zařízení k síti"
|
|
|
|
#define D_RESTART_IN "Restart"
|
|
#define D_SECONDS "sekund"
|
|
#define D_DEVICE_WILL_RESTART "Zařízení bude zrestartováno během několika sekund"
|
|
#define D_BUTTON_TOGGLE "Přepínač"
|
|
#define D_CONFIGURATION "Nastavení"
|
|
#define D_INFORMATION "Informace"
|
|
#define D_FIRMWARE_UPGRADE "Aktualizace firmware"
|
|
#define D_MANAGEMENT "Tools"
|
|
#define D_GPIO_VIEWER "GPIO Viewer"
|
|
#define D_CONSOLE "Konzole"
|
|
#define D_CONFIRM_RESTART "Potvrzení restartu"
|
|
|
|
#define D_CONFIGURE_MODULE "Nastavení modulu"
|
|
#define D_CONFIGURE_WIFI "Nastavení WiFi"
|
|
#define D_CONFIGURE_MQTT "Nastavení MQTT"
|
|
#define D_CONFIGURE_DOMOTICZ "Nastavení Domoticz"
|
|
#define D_CONFIGURE_LOGGING "Nastavení logování"
|
|
#define D_CONFIGURE_OTHER "Jiná nastavení"
|
|
#define D_CONFIRM_RESET_CONFIGURATION "Potvrzení resetu nastavení"
|
|
#define D_RESET_CONFIGURATION "Reset nastavení"
|
|
#define D_BACKUP_CONFIGURATION "Záloha nastavení"
|
|
#define D_RESTORE_CONFIGURATION "Obnovení nastavení"
|
|
#define D_START_RESTORE "Start restore"
|
|
#define D_MAIN_MENU "Hlavní menu"
|
|
|
|
#define D_MODULE_PARAMETERS "Nastavení modulu"
|
|
#define D_MODULE_TYPE "Typ modulu"
|
|
#define D_PULLUP_ENABLE "Tlačítko/Spínač bez pull-up"
|
|
#define D_ADC "ADC"
|
|
#define D_GPIO "GPIO"
|
|
#define D_SERIAL_IN "Serial In"
|
|
#define D_SERIAL_OUT "Serial Out"
|
|
|
|
#define D_WIFI_PARAMETERS "Nastavení WiFi"
|
|
#define D_SCAN_FOR_WIFI_NETWORKS "Scan sítí WiFi"
|
|
#define D_SCAN_DONE "Scan dokončen"
|
|
#define D_NO_NETWORKS_FOUND "Síť nebyla nalezena"
|
|
#define D_REFRESH_TO_SCAN_AGAIN "Zopakovat scan"
|
|
#define D_DUPLICATE_ACCESSPOINT "Kopie AP"
|
|
#define D_SKIPPING_LOW_QUALITY "Přeskočení z důvodu kvality signálu"
|
|
#define D_MODE "Mode"
|
|
#define D_RSSI "RSSI"
|
|
#define D_WEP "WEP"
|
|
#define D_WPA_PSK "WPA PSK"
|
|
#define D_WPA2_PSK "WPA2 PSK"
|
|
#define D_AP1_SSID "WiFi Network"
|
|
#define D_AP1_SSID_HELP "Type or Select your WiFi Network"
|
|
#define D_AP2_SSID "WiFi Network 2"
|
|
#define D_AP2_SSID_HELP "Type your Alternative WiFi Network"
|
|
#define D_AP_PASSWORD "Heslo WiFi"
|
|
#define D_AP_PASSWORD_HELP "Enter your WiFi Password"
|
|
#define D_SELECT_YOUR_WIFI_NETWORK "Select your WiFi Network"
|
|
#define D_SHOW_MORE_WIFI_NETWORKS "Scan for all WiFi Networks"
|
|
#define D_SHOW_MORE_OPTIONS "More Options"
|
|
#define D_CHECK_CREDENTIALS "Please, check your credentials"
|
|
#define D_SUCCESSFUL_WIFI_CONNECTION "Successful WiFi Connection"
|
|
#define D_NOW_YOU_CAN_CLOSE_THIS_WINDOW "Now you can close this window"
|
|
#define D_REDIRECTING_TO_NEW_IP "Redirecting to new device's IP address"
|
|
|
|
#define D_MQTT_PARAMETERS "Nastavení MQTT"
|
|
#define D_CLIENT "Klient"
|
|
#define D_FULL_TOPIC "Celý topic"
|
|
|
|
#define D_LOGGING_PARAMETERS "Volba logování"
|
|
#define D_SERIAL_LOG_LEVEL "Seriová úroveň logu"
|
|
#define D_MQTT_LOG_LEVEL "Mqtt log level"
|
|
#define D_WEB_LOG_LEVEL "Webová úroveň logu"
|
|
#define D_SYS_LOG_LEVEL "Systemová úroveň logu"
|
|
#define D_MORE_DEBUG "Více debug informací"
|
|
#define D_SYSLOG_HOST "Syslog host"
|
|
#define D_SYSLOG_PORT "Syslog port"
|
|
#define D_TELEMETRY_PERIOD "Interval telemetrie"
|
|
|
|
#define D_OTHER_PARAMETERS "Další nastavení"
|
|
#define D_TEMPLATE "Šablona"
|
|
#define D_ACTIVATE "Aktivovat"
|
|
#define D_DEVICE_NAME "Device Name"
|
|
#define D_WEB_ADMIN_PASSWORD "Heslo Web administrátora"
|
|
#define D_MQTT_ENABLE "MQTT aktivní"
|
|
#define D_MQTT_TLS_ENABLE "MQTT TLS"
|
|
#define D_HTTP_API "HTTP API"
|
|
#define D_HTTP_API_ENABLE "HTTP API aktivní"
|
|
#define D_FRIENDLY_NAME "Friendly Name"
|
|
#define D_BELKIN_WEMO "Belkin WeMo"
|
|
#define D_HUE_BRIDGE "Hue Bridge"
|
|
#define D_SINGLE_DEVICE "single device"
|
|
#define D_MULTI_DEVICE "multi device"
|
|
|
|
#define D_CONFIGURE_TEMPLATE "Nastavení šablony"
|
|
#define D_TEMPLATE_PARAMETERS "Parametry šablony"
|
|
#define D_TEMPLATE_NAME "Název"
|
|
#define D_BASE_TYPE "Vzor z"
|
|
#define D_TEMPLATE_FLAGS "Volby"
|
|
|
|
#define D_SAVE_CONFIGURATION "Ulož nastavení"
|
|
#define D_CONFIGURATION_SAVED "Nastavení uloženo"
|
|
#define D_CONFIGURATION_RESET "Nastavení resetováno"
|
|
|
|
#define D_PROGRAM_VERSION "Verze programu"
|
|
#define D_BUILD_DATE_AND_TIME "Datum a čas kompilace"
|
|
#define D_CORE_AND_SDK_VERSION "Verze Core/SDK"
|
|
#define D_FLASH_WRITE_COUNT "Počet zápisů do paměti"
|
|
#define D_MAC_ADDRESS "Adresa MAC"
|
|
#define D_MQTT_HOST "Host MQTT"
|
|
#define D_MQTT_PORT "Port MQTT"
|
|
#define D_MQTT_CLIENT "Klient MQTT"
|
|
#define D_MQTT_USER "Uživatel MQTT"
|
|
#define D_MQTT_TOPIC "Topic MQTT"
|
|
#define D_MQTT_GROUP_TOPIC "Topic skupiny MQTT"
|
|
#define D_MQTT_FULL_TOPIC "Celý topic MQTT"
|
|
#define D_MQTT_NO_RETAIN "MQTT No Retain"
|
|
#define D_MDNS_DISCOVERY "Získávání mDNS"
|
|
#define D_MDNS_ADVERTISE "Rozesílání mDNS"
|
|
#define D_ESP_CHIP_ID "ID systému ESP"
|
|
#define D_FLASH_CHIP_ID "ID systému paměti flash"
|
|
#define D_FLASH_CHIP_SIZE "Velikost flash"
|
|
#define D_FREE_PROGRAM_SPACE "Volné místo pro program"
|
|
|
|
#define D_UPGRADE_BY_WEBSERVER "Aktualizace z Web serveru"
|
|
#define D_OTA_URL "URL OTA"
|
|
#define D_START_UPGRADE "Start aktualizace"
|
|
#define D_UPGRADE_BY_FILE_UPLOAD "Aktualizace nahráním souboru"
|
|
#define D_UPLOAD_FACTORY "Switching to safeboot partition"
|
|
#define D_UPLOAD_STARTED "Nahrávání zahájeno"
|
|
#define D_UPGRADE_STARTED "Zahájení aktualizace"
|
|
#define D_UPLOAD_DONE "Nahrávání ukončeno"
|
|
#define D_UPLOAD_TRANSFER "Upload transfer"
|
|
#define D_TRANSFER_STARTED "Transfer started"
|
|
#define D_UPLOAD_ERR_1 "Soubor nebyl vybrán"
|
|
#define D_UPLOAD_ERR_2 "Málo místa"
|
|
#define D_UPLOAD_ERR_3 "Invalid file signature"
|
|
#define D_UPLOAD_ERR_4 "Velikost programu je větší než skutečná velikost paměti flash"
|
|
#define D_UPLOAD_ERR_5 "Chyba nahrávání, nesouhlasí porovnávané bity"
|
|
#define D_UPLOAD_ERR_6 "Chyba nahrávání. Spuštěn zápis do logu na úrovni 3"
|
|
#define D_UPLOAD_ERR_7 "Nahrávání přerušeno"
|
|
#define D_UPLOAD_ERR_8 "Špatný soubor"
|
|
#define D_UPLOAD_ERR_9 "Soubor je příliš velký"
|
|
#define D_UPLOAD_ERR_10 "Chyba inicializace RF chipu"
|
|
#define D_UPLOAD_ERR_11 "Chyba smazání RF chipu"
|
|
#define D_UPLOAD_ERR_12 "Chyba při zápisu do RF chipu"
|
|
#define D_UPLOAD_ERR_13 "Chyba dekódování RF firmwaru"
|
|
#define D_UPLOAD_ERR_14 "Not compatible"
|
|
#define D_UPLOAD_ERROR_CODE "Chyba nahrávání"
|
|
|
|
#define D_ENTER_COMMAND "Vlož příkaz"
|
|
#define D_ENABLE_WEBLOG_FOR_RESPONSE "Zapni úroveň 2 zápisu Weblog, pokud je očekávána odpověď"
|
|
#define D_NEED_USER_AND_PASSWORD "Vyžadován uživatel=<username>&heslo=<password>"
|
|
|
|
// xdrv_01_mqtt.ino
|
|
#define D_FINGERPRINT "Verifikuj otisk TLS..."
|
|
#define D_TLS_CONNECT_FAILED_TO "Nepřipojeno TLS do"
|
|
#define D_RETRY_IN "Zopakuji za"
|
|
#define D_VERIFIED "Ověřeno otisk "
|
|
#define D_INSECURE "Nesprávné připojení z důvodu chybného otisku TLS"
|
|
#define D_CONNECT_FAILED_TO "Spojení se nepodařilo navázat"
|
|
|
|
// xplg_wemohue.ino
|
|
#define D_MULTICAST_DISABLED "Multicast je vypnutý"
|
|
#define D_MULTICAST_REJOINED "Multicast opět připojený"
|
|
#define D_MULTICAST_JOIN_FAILED "Multicast neúspěšný"
|
|
#define D_FAILED_TO_SEND_RESPONSE "Nepodařilo se odeslat odpověď"
|
|
|
|
#define D_WEMO "WeMo"
|
|
#define D_WEMO_BASIC_EVENT "WeMo základní událost"
|
|
#define D_WEMO_EVENT_SERVICE "WeMo servisní událost"
|
|
#define D_WEMO_META_SERVICE "WeMo meta událost"
|
|
#define D_WEMO_SETUP "WeMo setup"
|
|
#define D_RESPONSE_SENT "Odpověď odeslána"
|
|
|
|
#define D_HUE "Hue"
|
|
#define D_HUE_BRIDGE_SETUP "Hue setup"
|
|
#define D_HUE_API_NOT_IMPLEMENTED "Hue API není implementováno"
|
|
#define D_HUE_API "Hue API"
|
|
#define D_HUE_POST_ARGS "Hue POST args"
|
|
#define D_3_RESPONSE_PACKETS_SENT "3 pakety odpovědi odeslány"
|
|
|
|
// xdrv_07_domoticz.ino
|
|
#define D_DOMOTICZ_PARAMETERS "Nastavení Domoticz"
|
|
#define D_DOMOTICZ_IDX "Idx"
|
|
#define D_DOMOTICZ_KEY_IDX "Key idx"
|
|
#define D_DOMOTICZ_SWITCH_IDX "Spinac idx"
|
|
#define D_DOMOTICZ_SENSOR_IDX "Sensor idx"
|
|
#define D_DOMOTICZ_TEMP "Temp"
|
|
#define D_DOMOTICZ_TEMP_HUM "Temp,Vlhk"
|
|
#define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Vlhk,Tlak"
|
|
#define D_DOMOTICZ_POWER_ENERGY "Příkon,Energie"
|
|
#define D_DOMOTICZ_ILLUMINANCE "Osvětlení"
|
|
#define D_DOMOTICZ_COUNT "Počítadlo/PM1"
|
|
#define D_DOMOTICZ_VOLTAGE "Napětí/PM2,5"
|
|
#define D_DOMOTICZ_CURRENT "Proud/PM10"
|
|
#define D_DOMOTICZ_AIRQUALITY "AirQuality"
|
|
#define D_DOMOTICZ_P1_SMART_METER "P1SmartMeter"
|
|
#define D_DOMOTICZ_UPDATE_TIMER "Aktualizace stopek"
|
|
|
|
// xdrv_09_timers.ino
|
|
#define D_CONFIGURE_TIMER "Nastavení Časovače"
|
|
#define D_TIMER_PARAMETERS "Časovač"
|
|
#define D_TIMER_ENABLE "Povol časovače"
|
|
#define D_TIMER_ARM "Aktivní"
|
|
#define D_TIMER_TIME "Čas"
|
|
#define D_TIMER_DAYS "Dny"
|
|
#define D_TIMER_REPEAT "Opakovat"
|
|
#define D_TIMER_OUTPUT "Výstup"
|
|
#define D_TIMER_ACTION "Napájení"
|
|
|
|
// xdrv_10_knx.ino
|
|
#define D_CONFIGURE_KNX "Nastavení KNX"
|
|
#define D_KNX_PARAMETERS "KNX parametry"
|
|
#define D_KNX_GENERAL_CONFIG "Obecné"
|
|
#define D_KNX_PHYSICAL_ADDRESS "Fyzická adresa"
|
|
#define D_KNX_PHYSICAL_ADDRESS_NOTE "( Musí být jedinečná v síti KNX )"
|
|
#define D_KNX_ENABLE "Povol KNX"
|
|
#define D_KNX_GROUP_ADDRESS_TO_WRITE "Data k odeslání na skupinové adresy"
|
|
#define D_ADD "Přidej"
|
|
#define D_DELETE "Smaž"
|
|
#define D_REPLY "Odpověď"
|
|
#define D_KNX_GROUP_ADDRESS_TO_READ "Skupinové adresy pro příjem dat z"
|
|
#define D_RECEIVED_FROM "Přijato z"
|
|
#define D_KNX_COMMAND_WRITE "Zapiš"
|
|
#define D_KNX_COMMAND_READ "Čti"
|
|
#define D_KNX_COMMAND_OTHER "Jiné"
|
|
#define D_SENT_TO "pošli"
|
|
#define D_KNX_WARNING "Skupinová adresa ( 0 / 0 / 0 ) je rezervována a nemůže být použita."
|
|
#define D_KNX_ENHANCEMENT "Communication Enhancement"
|
|
#define D_KNX_TX_SLOT "KNX TX"
|
|
#define D_KNX_RX_SLOT "KNX RX"
|
|
#define D_KNX_TX_SCENE "KNX SCENE TX"
|
|
#define D_KNX_RX_SCENE "KNX SCENE RX"
|
|
|
|
// xdrv_23_zigbee
|
|
#define D_ZIGBEE_PERMITJOIN_ACTIVE "Devices allowed to join"
|
|
#define D_ZIGBEE_MAPPING_TITLE "Tasmota Zigbee Mapping"
|
|
#define D_ZIGBEE_NOT_STARTED "Zigbee not started"
|
|
#define D_ZIGBEE_MAPPING_IN_PROGRESS_SEC "Mapping in progress (%d s. remaining)"
|
|
#define D_ZIGBEE_MAPPING_NOT_PRESENT "No mapping"
|
|
#define D_ZIGBEE_MAP_REFRESH "Zigbee Map Refresh"
|
|
#define D_ZIGBEE_MAP "Zigbee Map"
|
|
#define D_ZIGBEE_PERMITJOIN "Zigbee Permit Join"
|
|
#define D_ZIGBEE_GENERATE_KEY "generating random Zigbee network key"
|
|
#define D_ZIGBEE_UNKNOWN_DEVICE "Unknown device"
|
|
#define D_ZIGBEE_UNKNOWN_ATTRIBUTE "Unknown attribute"
|
|
#define D_ZIGBEE_UNKNOWN_ENDPOINT "Unknown endpoint"
|
|
#define D_ZIGBEE_INVALID_PARAM "Invalid parameter"
|
|
#define D_ZIGBEE_MISSING_PARAM "Missing parameters"
|
|
#define D_ZIGBEE_UNKNWON_ATTRIBUTE "Unknown attribute name (ignored): %s"
|
|
#define D_ZIGBEE_TOO_MANY_CLUSTERS "No more than one cluster id per command"
|
|
#define D_ZIGBEE_CONFLICTING_ENDPOINTS "Conflicting destination endpoints"
|
|
#define D_ZIGBEE_WRONG_DELIMITER "Wrong delimiter for payload"
|
|
#define D_ZIGBEE_UNRECOGNIZED_COMMAND "Unrecognized zigbee command: %s"
|
|
#define D_ZIGBEE_TOO_MANY_COMMANDS "Only 1 command allowed (%d)"
|
|
#define D_ZIGBEE_NO_ATTRIBUTE "No attribute in list"
|
|
#define D_ZIGBEE_UNSUPPORTED_ATTRIBUTE_TYPE "Unsupported attribute type"
|
|
#define D_ZIGBEE_JSON_REQUIRED "Config requires JSON objects"
|
|
#define D_ZIGBEE_RESET_1_OR_2 "1 or 2 to reset"
|
|
#define D_ZIGBEE_EEPROM_FOUND_AT_ADDRESS "ZBBridge EEPROM found at address"
|
|
#define D_ZIGBEE_RANDOMIZING_ZBCONFIG "Randomizing Zigbee parameters, please check with 'ZbConfig'"
|
|
|
|
// xdrv_89_dali.ino
|
|
#define D_SENSOR_DALI_RX "Dali RX"
|
|
#define D_SENSOR_DALI_TX "Dali TX"
|
|
#define D_CONFIGURE_DALI "Config DALI"
|
|
|
|
// xdrv_03_energy.ino
|
|
#define D_ENERGY_TODAY "Spotřeba Dnes"
|
|
#define D_ENERGY_YESTERDAY "Spotřeba Včera"
|
|
#define D_ENERGY_TOTAL "Celková spotřeba"
|
|
|
|
// xsns_100_ina3221.ino
|
|
#define D_UNIT_CHARGE "Ah"
|
|
#define D_CHARGE "Charge"
|
|
#define D_ENERGY "Energy"
|
|
|
|
// xdrv_27_shutter.ino
|
|
#define D_OPEN "Open"
|
|
#define D_CLOSE "Close"
|
|
#define D_DOMOTICZ_SHUTTER "Shutter"
|
|
|
|
// xdrv_28_pcf8574.ino
|
|
#define D_CONFIGURE_PCF8574 "Configure PCF8574"
|
|
#define D_PCF8574_PARAMETERS "PCF8574 parameters"
|
|
#define D_INVERT_PORTS "Invert Ports"
|
|
#define D_DEVICE "Device"
|
|
#define D_DEVICE_INPUT "Input"
|
|
#define D_DEVICE_OUTPUT "Output"
|
|
|
|
// xdrv_39_thermostat.ino, xdrv_85_esp32_ble_eq3_trv.ino
|
|
#define D_THERMOSTAT "Thermostat"
|
|
#define D_THERMOSTAT_SET_POINT "Set Point Temperature"
|
|
#define D_THERMOSTAT_SENSOR "Current Temperature"
|
|
#define D_THERMOSTAT_GRADIENT "Gradient Temperature"
|
|
#define D_THERMOSTAT_DUTY_CYCLE "Duty cycle"
|
|
#define D_THERMOSTAT_VALVE_POSITION "Valve Position"
|
|
#define D_THERMOSTAT_CYCLE_TIME "Cycle time"
|
|
#define D_THERMOSTAT_PI_AUTOTUNE "PI Auto tuning"
|
|
#define D_THERMOSTAT_CONTROL_METHOD "Control method"
|
|
#define D_THERMOSTAT_RAMP_UP "Ramp up"
|
|
#define D_THERMOSTAT_PI "PI"
|
|
#define D_THERMOSTAT_AUTOTUNE "Autotune"
|
|
#define D_THERMOSTAT_RAMP_UP_HYBRID "Ramp up (Hybrid)"
|
|
#define D_THERMOSTAT_PI_HYBRID "PI (Hybrid)"
|
|
#define D_THERMOSTAT_AUTOTUNE_HYBRID "Autotune (Hybrid)"
|
|
|
|
// xsns_05_ds18b20.ino
|
|
#define D_SENSOR_BUSY "Sensor DS18x20 obsazen"
|
|
#define D_SENSOR_CRC_ERROR "Sensor DS18x20 chyba CRC"
|
|
#define D_SENSORS_FOUND "Nalezen sensor DS18x20"
|
|
|
|
// xsns_06_dht.ino
|
|
#define D_TIMEOUT_WAITING_FOR "Čekání na"
|
|
#define D_START_SIGNAL_LOW "nízký startovní signál"
|
|
#define D_START_SIGNAL_HIGH "vysoký startovní signál"
|
|
#define D_PULSE "impuls"
|
|
#define D_CHECKSUM_FAILURE "Chybný kontrolní součet"
|
|
|
|
// xsns_07_sht1x.ino
|
|
#define D_SENSOR_DID_NOT_ACK_COMMAND "Sensor neobdržel příkaz ACK"
|
|
#define D_SHT1X_FOUND "SHT1X nalezen"
|
|
|
|
// xsns_18_pms5003.ino
|
|
#define D_STANDARD_CONCENTRATION "CF-1 PM" // Standard Particle CF-1 Particle Matter
|
|
#define D_ENVIRONMENTAL_CONCENTRATION "PM" // Environmetal Particle Matter
|
|
#define D_PARTICALS_BEYOND "částic"
|
|
|
|
// xsns_27_apds9960.ino
|
|
#define D_GESTURE "Gesto"
|
|
#define D_COLOR_RED "Červená"
|
|
#define D_COLOR_GREEN "Zelená"
|
|
#define D_COLOR_BLUE "Modrá"
|
|
#define D_CCT "CCT"
|
|
#define D_PROXIMITY "Blízkost"
|
|
|
|
// xsns_32_mpu6050.ino
|
|
#define D_AX_AXIS "Accel. osa-X"
|
|
#define D_AY_AXIS "Accel. osa-Y"
|
|
#define D_AZ_AXIS "Accel. osa-Z"
|
|
#define D_GX_AXIS "Gyro osa-X"
|
|
#define D_GY_AXIS "Gyro osa-Y"
|
|
#define D_GZ_AXIS "Gyro osa-Z"
|
|
|
|
// xsns_33_QMC5883L.ino
|
|
#define D_MX "Induction X-Axis"
|
|
#define D_MY "Induction Y-Axis"
|
|
#define D_MZ "Induction Z-Axis"
|
|
#define D_MAGNETICFLD "Magnetic Induction"
|
|
|
|
// xsns_34_hx711.ino
|
|
#define D_HX_CAL_REMOVE "Odstraňte zátěž"
|
|
#define D_HX_CAL_REFERENCE "Vložte referenční zátěž"
|
|
#define D_HX_CAL_DONE "Zkalibrováno"
|
|
#define D_HX_CAL_FAIL "Chyba kalibrace"
|
|
#define D_RESET_HX711 "Reset váhy"
|
|
#define D_CONFIGURE_HX711 "Konfigurace váhy"
|
|
#define D_HX711_PARAMETERS "Parametry váhy"
|
|
#define D_ITEM_WEIGHT "Vlastní hmotnost"
|
|
#define D_REFERENCE_WEIGHT "Referenční hmotnost"
|
|
#define D_CALIBRATE "Kalibruj"
|
|
#define D_CALIBRATION "Kalibrace"
|
|
|
|
//xsns_35_tx20.ino
|
|
#define D_TX20_WIND_DIRECTION "Směr větru"
|
|
#define D_TX20_WIND_SPEED "Rychlost větru"
|
|
#define D_TX20_WIND_SPEED_MIN "Minimální rychlost větru"
|
|
#define D_TX20_WIND_SPEED_MAX "Maximální rychlost větru"
|
|
#define D_TX20_NORTH "S"
|
|
#define D_TX20_EAST "V"
|
|
#define D_TX20_SOUTH "J"
|
|
#define D_TX20_WEST "Z"
|
|
|
|
// xsns_53_sml.ino
|
|
#define D_TPWRIN "Energy Total-In"
|
|
#define D_TPWRIN0 "Energy Total-In T0"
|
|
#define D_TPWRIN1 "Energy Total-In T1"
|
|
#define D_TPWROUT "Energy Total-Out"
|
|
#define D_TPWRCURR "Active Power-In/Out"
|
|
#define D_TPWRCURR1 "Active Power-In p1"
|
|
#define D_TPWRCURR2 "Active Power-In p2"
|
|
#define D_TPWRCURR3 "Active Power-In p3"
|
|
#define D_Strom_L1 "Current L1"
|
|
#define D_Strom_L2 "Current L2"
|
|
#define D_Strom_L3 "Current L3"
|
|
#define D_Spannung_L1 "Voltage L1"
|
|
#define D_Spannung_L2 "Voltage L2"
|
|
#define D_Spannung_L3 "Voltage L3"
|
|
#define D_METERNR "Meter_number"
|
|
#define D_METERSID "Service ID"
|
|
#define D_GasIN "Counter"
|
|
#define D_H2oIN "Counter"
|
|
#define D_StL1L2L3 "Current L1+L2+L3"
|
|
#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
|
|
|
|
// xsns_86_tfminiplus.ino
|
|
#define D_SIGNALSTRENGTH "Signal Strength"
|
|
#define D_CHIPTEMPERATURE "Chip Temperature"
|
|
|
|
// tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
|
|
#define D_SENSOR_NONE "Není"
|
|
#define D_SENSOR_USER "User"
|
|
#define D_SENSOR_OPTION "Option"
|
|
#define D_SENSOR_DHT11 "DHT11"
|
|
#define D_SENSOR_AM2301 "AM2301"
|
|
#define D_SENSOR_SI7021 "SI7021"
|
|
#define D_SENSOR_MS01 "MS01"
|
|
#define D_SENSOR_DS18X20 "DS18x20"
|
|
#define D_SENSOR_I2C_SCL "I2C SCL"
|
|
#define D_SENSOR_I2C_SDA "I2C SDA"
|
|
#define D_SENSOR_I2S_MCLK "I2S MCLK"
|
|
#define D_SENSOR_I2S_BCLK "I2S BCLK"
|
|
#define D_SENSOR_I2S_WS_IN "I2S BCLK IN"
|
|
#define D_SENSOR_I2S_WS "I2S WS"
|
|
#define D_SENSOR_I2S_BCLK_IN "I2S WS IN"
|
|
#define D_SENSOR_I2S_DIN "I2S DIN"
|
|
#define D_SENSOR_I2S_DOUT "I2S DOUT"
|
|
#define D_SENSOR_I2S_DAC "I2S DAC"
|
|
#define D_SENSOR_HDMI_CEC "HDMI CEC"
|
|
#define D_SENSOR_WS2812 "WS2812"
|
|
#define D_SENSOR_DFR562 "MP3 Player"
|
|
#define D_SENSOR_DFR562_BUSY "MP3 Busy"
|
|
#define D_SENSOR_IRSEND "IRsend"
|
|
#define D_SENSOR_SWITCH "Spínač" // Suffix "1"
|
|
#define D_SENSOR_BUTTON "Tlačítko" // Suffix "1"
|
|
#define D_SENSOR_RELAY "Relé" // Suffix "1i"
|
|
#define D_SENSOR_LED "Led" // Suffix "1i"
|
|
#define D_SENSOR_LED_LINK "LedLink" // Suffix "i"
|
|
#define D_SENSOR_PWM "PWM" // Suffix "1",
|
|
#define D_SENSOR_COUNTER "Počítadlo" // Suffix "1"
|
|
#define D_SENSOR_INTERRUPT "Interrupt"
|
|
#define D_SENSOR_INPUT "Input"
|
|
#define D_SENSOR_IRRECV "IRrecv"
|
|
#define D_SENSOR_MHZ_RX "MHZ Rx"
|
|
#define D_SENSOR_MHZ_TX "MHZ Tx"
|
|
#define D_SENSOR_HC8_RX "HC8 Rx"
|
|
#define D_SENSOR_PZEM004_RX "PZEM004 Rx"
|
|
#define D_SENSOR_PZEM016_RX "PZEM016 Rx"
|
|
#define D_SENSOR_PZEM017_RX "PZEM017 Rx"
|
|
#define D_SENSOR_PZEM0XX_TX "PZEM0XX Tx"
|
|
#define D_SENSOR_SAIR_RX "SAir Rx"
|
|
#define D_SENSOR_SAIR_TX "SAir Tx"
|
|
#define D_SENSOR_SPI_CS "SPI CS"
|
|
#define D_SENSOR_SPI_DC "SPI DC"
|
|
#define D_SENSOR_SPI_MISO "SPI MISO"
|
|
#define D_SENSOR_SPI_MOSI "SPI MOSI"
|
|
#define D_SENSOR_SPI_CLK "SPI CLK"
|
|
#define D_SENSOR_SDIO_CMD "SDIO CMD"
|
|
#define D_GPIO_TS_SPI_CS "TS SPI CS"
|
|
#define D_GPIO_TS_RST "TS RST"
|
|
#define D_GPIO_TS_IRQ "TS IRQ"
|
|
#define D_SENSOR_SDIO_CMD "SDIO CMD"
|
|
#define D_SENSOR_SDIO_CLK "SDIO CLK"
|
|
#define D_SENSOR_SDIO_D0 "SDIO D0"
|
|
#define D_SENSOR_SDIO_D1 "SDIO D1"
|
|
#define D_SENSOR_SDIO_D2 "SDIO D2"
|
|
#define D_SENSOR_SDIO_D3 "SDIO D3"
|
|
#define D_SENSOR_BACKLIGHT "Backlight"
|
|
#define D_SENSOR_PMS5003_TX "PMS5003 Tx"
|
|
#define D_SENSOR_PMS5003_RX "PMS5003 Rx"
|
|
#define D_SENSOR_SDS0X1_RX "SDS0X1 Rx"
|
|
#define D_SENSOR_SDS0X1_TX "SDS0X1 Tx"
|
|
#define D_SENSOR_HPMA_RX "HPMA Rx"
|
|
#define D_SENSOR_HPMA_TX "HPMA Tx"
|
|
#define D_SENSOR_SBR_RX "SerBr Rx"
|
|
#define D_SENSOR_SBR_TX "SerBr Tx"
|
|
#define D_SENSOR_MBR_TX "ModBr Tx"
|
|
#define D_SENSOR_MBR_RX "ModBr Rx"
|
|
#define D_SENSOR_MBR_TX_ENA "ModBr Tx Ena"
|
|
#define D_SENSOR_SR04_TRIG "SR04 Tri/TX"
|
|
#define D_SENSOR_SR04_ECHO "SR04 Ech/RX"
|
|
#define D_SENSOR_NRG_MBS_TX "NrgMbs Tx"
|
|
#define D_SENSOR_NRG_MBS_RX "NrgMbs Rx"
|
|
#define D_SENSOR_NRG_MBS_TX_ENA "NrgMbs Tx Ena"
|
|
#define D_SENSOR_SDM72_TX "SDM72 Tx"
|
|
#define D_SENSOR_SDM72_RX "SDM72 Rx"
|
|
#define D_SENSOR_SDM120_TX "SDMx20 Tx"
|
|
#define D_SENSOR_SDM120_RX "SDMx20 Rx"
|
|
#define D_SENSOR_SDM230_TX "SDM230 Tx"
|
|
#define D_SENSOR_SDM230_RX "SDM230 Rx"
|
|
#define D_SENSOR_SDM630_TX "SDM630 Tx"
|
|
#define D_SENSOR_SDM630_RX "SDM630 Rx"
|
|
#define D_SENSOR_WE517_TX "WE517 Tx"
|
|
#define D_SENSOR_WE517_RX "WE517 Rx"
|
|
#define D_SENSOR_LD2410_TX "LD2410 Tx"
|
|
#define D_SENSOR_LD2410_RX "LD2410 Rx"
|
|
#define D_GPIO_TM1621_CS "TM1621 CS"
|
|
#define D_GPIO_TM1621_WR "TM1621 WR"
|
|
#define D_GPIO_TM1621_RD "TM1621 RD"
|
|
#define D_GPIO_TM1621_DAT "TM1621 DAT"
|
|
#define D_SENSOR_TM1637_CLK "TM1637 CLK"
|
|
#define D_SENSOR_TM1637_DIO "TM1637 DIO"
|
|
#define D_SENSOR_TM1638_CLK "TM1638 CLK"
|
|
#define D_SENSOR_TM1638_DIO "TM1638 DIO"
|
|
#define D_SENSOR_TM1638_STB "TM1638 STB"
|
|
#define D_SENSOR_MAX7219_DIN "MAX7219 DIN"
|
|
#define D_SENSOR_MAX7219_CS "MAX7219 CS"
|
|
#define D_SENSOR_MAX7219_CLK "MAX7219 CLK"
|
|
#define D_SENSOR_HX711_SCK "HX711 SCK"
|
|
#define D_SENSOR_HX711_DAT "HX711 DAT"
|
|
#define D_SENSOR_FTC532 "FTC532"
|
|
#define D_SENSOR_BS814_CLK "BS814 CLK"
|
|
#define D_SENSOR_BS814_DAT "BS814 DAT"
|
|
#define D_SENSOR_TX2X_TX "TX2x"
|
|
#define D_SENSOR_RFSEND "RFSend"
|
|
#define D_SENSOR_RFRECV "RFrecv"
|
|
#define D_SENSOR_TUYA_TX "Tuya Tx"
|
|
#define D_SENSOR_TUYA_RX "Tuya Rx"
|
|
#define D_SENSOR_MGC3130_XFER "MGC3130 Xfr"
|
|
#define D_SENSOR_MGC3130_RESET "MGC3130 Rst"
|
|
#define D_SENSOR_SSPI_MISO "SSPI MISO"
|
|
#define D_SENSOR_SSPI_MOSI "SSPI MOSI"
|
|
#define D_SENSOR_SSPI_SCLK "SSPI SCLK"
|
|
#define D_SENSOR_SSPI_CS "SSPI CS"
|
|
#define D_SENSOR_SSPI_DC "SSPI DC"
|
|
#define D_SENSOR_RF_SENSOR "RF Sensor"
|
|
#define D_SENSOR_AZ_RX "AZ Rx"
|
|
#define D_SENSOR_AZ_TX "AZ Tx"
|
|
#define D_SENSOR_MAX31855_CS "MX31855 CS"
|
|
#define D_SENSOR_MAX31855_CLK "MX31855 CLK"
|
|
#define D_SENSOR_MAX31855_DO "MX31855 DO"
|
|
#define D_SENSOR_MAX31865_CS "MX31865 CS"
|
|
#define D_GPIO_RN2XX3_TX "RN2XX3 Tx"
|
|
#define D_GPIO_RN2XX3_RX "RN2XX3 Rx"
|
|
#define D_GPIO_RN2XX3_RST "RN2XX3 Rst"
|
|
#define D_GPIO_ASR650X_TX "ASR650x Tx"
|
|
#define D_GPIO_ASR650X_RX "ASR650x Rx"
|
|
#define D_GPIO_LORA_CS "LoRa CS"
|
|
#define D_GPIO_LORA_RST "LoRa Rst"
|
|
#define D_GPIO_LORA_BUSY "LoRa Busy"
|
|
#define D_GPIO_LORA_DI "LoRa DIO" // Suffix "0","1","2"
|
|
#define D_SENSOR_NRG_SEL "HLWBL SEL" // Suffix "i"
|
|
#define D_SENSOR_NRG_CF1 "HLWBL CF1"
|
|
#define D_SENSOR_HLW_CF "HLW8012 CF"
|
|
#define D_SENSOR_HJL_CF "BL0937 CF"
|
|
#define D_SENSOR_MCP39F5_TX "MCP39F5 Tx"
|
|
#define D_SENSOR_MCP39F5_RX "MCP39F5 Rx"
|
|
#define D_SENSOR_MCP39F5_RST "MCP39F5 Rst"
|
|
#define D_SENSOR_CSE7761_TX "CSE7761 Tx"
|
|
#define D_SENSOR_CSE7761_RX "CSE7761 Rx"
|
|
#define D_SENSOR_CSE7766_TX "CSE7766 Tx"
|
|
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
|
|
#define D_SENSOR_BL0939_RX "BL0939 Rx"
|
|
#define D_SENSOR_BL0942_RX "BL0942 Rx"
|
|
#define D_SENSOR_HM330X_SET "HM330X SET"
|
|
#define D_SENSOR_PN532_TX "PN532 Tx"
|
|
#define D_SENSOR_PN532_RX "PN532 Rx"
|
|
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
|
|
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
|
|
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
|
|
#define D_SENSOR_P9813_CLK "P9813 Clk"
|
|
#define D_SENSOR_P9813_DAT "P9813 Dat"
|
|
#define D_SENSOR_MY92X1_DI "MY92x1 DI"
|
|
#define D_SENSOR_MY92X1_DCKI "MY92x1 DCKI"
|
|
#define D_SENSOR_ARIRFRCV "ALux IrRcv"
|
|
#define D_SENSOR_ARIRFSEL "ALux IrSel"
|
|
#define D_SENSOR_TXD "Serial Tx"
|
|
#define D_SENSOR_RXD "Serial Rx"
|
|
#define D_SENSOR_ROTARY "Rotary" // Suffix "1A"
|
|
#define D_SENSOR_HRE_CLOCK "HRE Clock"
|
|
#define D_SENSOR_HRE_DATA "HRE Data"
|
|
#define D_SENSOR_ADE7880_IRQ "ADE7880 IRQ"
|
|
#define D_SENSOR_ADE7953_IRQ "ADE7953 IRQ"
|
|
#define D_SENSOR_ADE7953_RST "ADE7953 RST"
|
|
#define D_SENSOR_ADE7953_CS "ADE7953 CS"
|
|
#define D_SENSOR_BUZZER "Buzzer"
|
|
#define D_SENSOR_DISP_RESET "Display Rst"
|
|
#define D_SENSOR_ZIGBEE_TXD "Zigbee Tx"
|
|
#define D_SENSOR_ZIGBEE_RXD "Zigbee Rx"
|
|
#define D_SENSOR_ZIGBEE_RST "Zigbee Rst"
|
|
#define D_SENSOR_SOLAXX1_TX "SolaxX1 Tx"
|
|
#define D_SENSOR_SOLAXX1_RX "SolaxX1 Rx"
|
|
#define D_SENSOR_SOLAXX1_RTS "SolaxX1 RTS"
|
|
#define D_SENSOR_IBEACON_TX "iBeacon TX"
|
|
#define D_SENSOR_IBEACON_RX "iBeacon RX"
|
|
#define D_SENSOR_RDM6300_RX "RDM6300 RX"
|
|
#define D_SENSOR_CC1101_CS "CC1101 CS"
|
|
#define D_SENSOR_A4988_DIR "A4988 DIR"
|
|
#define D_SENSOR_A4988_STP "A4988 STP"
|
|
#define D_SENSOR_A4988_ENA "A4988 ENA"
|
|
#define D_SENSOR_A4988_MS1 "A4988 MS1"
|
|
#define D_SENSOR_OUTPUT_HI "Output Hi"
|
|
#define D_SENSOR_OUTPUT_LO "Output Lo"
|
|
#define D_SENSOR_AS608_TX "AS608 Tx"
|
|
#define D_SENSOR_AS608_RX "AS608 Rx"
|
|
#define D_SENSOR_GM861_TX "GM861 Tx"
|
|
#define D_SENSOR_GM861_RX "GM861 Rx"
|
|
#define D_SENSOR_DDS2382_TX "DDS238-2 Tx"
|
|
#define D_SENSOR_DDS2382_RX "DDS238-2 Rx"
|
|
#define D_SENSOR_DDSU666_TX "DDSU666 Tx"
|
|
#define D_SENSOR_DDSU666_RX "DDSU666 Rx"
|
|
#define D_SENSOR_SM2135_CLK "SM2135 Clk"
|
|
#define D_SENSOR_SM2135_DAT "SM2135 Dat"
|
|
#define D_SENSOR_SM2335_CLK "SM2335 Clk"
|
|
#define D_SENSOR_SM2335_DAT "SM2335 Dat"
|
|
#define D_SENSOR_BP1658CJ_CLK "BP1658CJ Clk"
|
|
#define D_SENSOR_BP1658CJ_DAT "BP1658CJ Dat"
|
|
#define D_SENSOR_BP5758D_CLK "BP5758D Clk"
|
|
#define D_SENSOR_BP5758D_DAT "BP5758D Dat"
|
|
#define D_SENSOR_DEEPSLEEP "DeepSleep"
|
|
#define D_SENSOR_EXS_ENABLE "EXS Enable"
|
|
#define D_SENSOR_CLIENT_TX "Client TX"
|
|
#define D_SENSOR_CLIENT_RX "Client RX"
|
|
#define D_SENSOR_CLIENT_RESET "Client RST"
|
|
#define D_SENSOR_GPS_RX "GPS RX"
|
|
#define D_SENSOR_GPS_TX "GPS TX"
|
|
#define D_SENSOR_HM10_RX "HM10 RX"
|
|
#define D_SENSOR_HM10_TX "HM10 TX"
|
|
#define D_SENSOR_LE01MR_RX "LE-01MR Rx"
|
|
#define D_SENSOR_LE01MR_TX "LE-01MR Tx"
|
|
#define D_SENSOR_BL0940_RX "BL0940 Rx"
|
|
#define D_SENSOR_CC1101_GDO0 "CC1101 GDO0"
|
|
#define D_SENSOR_CC1101_GDO2 "CC1101 GDO2"
|
|
#define D_SENSOR_HRXL_RX "HRXL Rx"
|
|
#define D_SENSOR_DYP_RX "DYP Rx"
|
|
#define D_SENSOR_ELECTRIQ_MOODL "MOODL Tx"
|
|
#define D_SENSOR_AS3935 "AS3935"
|
|
#define D_SENSOR_WINDMETER_SPEED "WindMeter Spd"
|
|
#define D_SENSOR_TELEINFO_RX "TInfo Rx"
|
|
#define D_SENSOR_TELEINFO_ENABLE "TInfo EN"
|
|
#define D_SENSOR_LMT01_PULSE "LMT01 Pulse"
|
|
#define D_SENSOR_ADC_INPUT "ADC Input"
|
|
#define D_SENSOR_ADC_TEMP "ADC Temp"
|
|
#define D_SENSOR_ADC_LIGHT "ADC Light"
|
|
#define D_SENSOR_ADC_BUTTON "ADC Button"
|
|
#define D_SENSOR_ADC_RANGE "ADC Range"
|
|
#define D_SENSOR_ADC_CT_POWER "ADC CT Power"
|
|
#define D_SENSOR_ADC_JOYSTICK "ADC Joystick"
|
|
#define D_SENSOR_ADC_PH "ADC pH"
|
|
#define D_SENSOR_ADC_MQ "ADC MQ"
|
|
#define D_GPIO_WEBCAM_PWDN "CAM_PWDN"
|
|
#define D_GPIO_WEBCAM_RESET "CAM_RESET"
|
|
#define D_GPIO_WEBCAM_XCLK "CAM_XCLK"
|
|
#define D_GPIO_WEBCAM_SIOD "CAM_SIOD"
|
|
#define D_GPIO_WEBCAM_SIOC "CAM_SIOC"
|
|
#define D_GPIO_WEBCAM_DATA "CAM_DATA"
|
|
#define D_GPIO_WEBCAM_VSYNC "CAM_VSYNC"
|
|
#define D_GPIO_WEBCAM_HREF "CAM_HREF"
|
|
#define D_GPIO_WEBCAM_PCLK "CAM_PCLK"
|
|
#define D_GPIO_WEBCAM_PSCLK "CAM_PSCLK"
|
|
#define D_GPIO_WEBCAM_HSD "CAM_HSD"
|
|
#define D_GPIO_WEBCAM_PSRCS "CAM_PSRCS"
|
|
#define D_SENSOR_ETH_PHY_POWER "ETH POWER"
|
|
#define D_SENSOR_ETH_PHY_MDC "ETH MDC"
|
|
#define D_SENSOR_ETH_PHY_MDIO "ETH MDIO"
|
|
#define D_SENSOR_TCP_TXD "TCP Tx"
|
|
#define D_SENSOR_TCP_TXD_EN "TCP Tx En"
|
|
#define D_SENSOR_TCP_RXD "TCP Rx"
|
|
#define D_SENSOR_IEM3000_TX "iEM3000 TX"
|
|
#define D_SENSOR_IEM3000_RX "iEM3000 RX"
|
|
#define D_SENSOR_MIEL_HVAC_TX "MiEl HVAC Tx"
|
|
#define D_SENSOR_MIEL_HVAC_RX "MiEl HVAC Rx"
|
|
#define D_SENSOR_PROJECTOR_CTRL_TX "DLP Tx"
|
|
#define D_SENSOR_PROJECTOR_CTRL_RX "DLP Rx"
|
|
#define D_SENSOR_SHELLY_DIMMER_BOOT0 "SHD Boot 0"
|
|
#define D_SENSOR_SHELLY_DIMMER_RST_INV "SHD Reset"
|
|
#define D_SENSOR_RC522_RST "RC522 Rst"
|
|
#define D_SENSOR_RC522_CS "RC522 CS"
|
|
#define D_SENSOR_NRF24_CS "NRF24 CS"
|
|
#define D_SENSOR_NRF24_DC "NRF24 DC"
|
|
#define D_SENSOR_XPT2046_CS "XPT2046 CS"
|
|
#define D_SENSOR_ILI9341_CS "ILI9341 CS"
|
|
#define D_SENSOR_ILI9341_DC "ILI9341 DC"
|
|
#define D_SENSOR_ILI9488_CS "ILI9488 CS"
|
|
#define D_SENSOR_EPAPER29_CS "EPaper29 CS"
|
|
#define D_SENSOR_EPAPER42_CS "EPaper42 CS"
|
|
#define D_SENSOR_SSD1351_CS "SSD1351 CS"
|
|
#define D_SENSOR_SSD1351_DC "SSD1351 DC"
|
|
#define D_SENSOR_RA8876_CS "RA8876 CS"
|
|
#define D_SENSOR_ST7789_CS "ST7789 CS"
|
|
#define D_SENSOR_ST7789_DC "ST7789 DC"
|
|
#define D_SENSOR_SSD1331_CS "SSD1331 CS"
|
|
#define D_SENSOR_SSD1331_DC "SSD1331 DC"
|
|
#define D_SENSOR_SDCARD_CS "SDCard CS"
|
|
#define D_SENSOR_WIEGAND_D0 "Wiegand D0"
|
|
#define D_SENSOR_WIEGAND_D1 "Wiegand D1"
|
|
#define D_SENSOR_NEOPOOL_TX "NeoPool Tx"
|
|
#define D_SENSOR_NEOPOOL_RX "NeoPool Rx"
|
|
#define D_SENSOR_VL53LXX_XSHUT "VL53LXX XSHUT"
|
|
#define D_SENSOR_TFMINIPLUS_TX "TFmini+ TX"
|
|
#define D_SENSOR_TFMINIPLUS_RX "TFmini+ RX"
|
|
#define D_SENSOR_ZEROCROSS "ZC Pulse"
|
|
#define D_SENSOR_HALLEFFECT "HallEffect"
|
|
#define D_SENSOR_EPD_DATA "EPD Data"
|
|
#define D_SENSOR_PCF8574_INT "PCF8574 Int"
|
|
#define D_SENSOR_MCP23XXX_INT "MCP23xxx Int"
|
|
#define D_SENSOR_MCP23SXX_CS "MCP23Sxx CS"
|
|
#define D_SENSOR_MCP2515_CS "MCP2515 CS"
|
|
#define D_SENSOR_HRG15_RX "HRG15 Rx"
|
|
#define D_SENSOR_HRG15_TX "HRG15 Tx"
|
|
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
|
|
#define D_SENSOR_BL6523_TX "BL6523 Tx"
|
|
#define D_SENSOR_BL6523_RX "BL6523 Rx"
|
|
#define D_SENSOR_HEARTBEAT "Heartbeat"
|
|
#define D_SENSOR_RESET "Reset"
|
|
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
|
|
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
|
|
#define D_GPIO_SHIFT595_OE "74x595 OE"
|
|
#define D_GPIO_SHIFT595_SER "74x595 SER"
|
|
#define D_GPIO_DINGTIAN_CLK "Dingtian CLK"
|
|
#define D_GPIO_DINGTIAN_SDI "Dingtian SDI"
|
|
#define D_GPIO_DINGTIAN_Q7 "Dingtian Q7"
|
|
#define D_GPIO_DINGTIAN_PL "Dingtian PL"
|
|
#define D_GPIO_DINGTIAN_OE "Dingtian OE"
|
|
#define D_GPIO_DINGTIAN_RCK "Dingtian RCK"
|
|
#define D_SENSOR_CM11_TX "CM110x TX"
|
|
#define D_SENSOR_CM11_RX "CM110x RX"
|
|
#define D_SENSOR_FLOWRATEMETER "Flowrate"
|
|
#define D_SENSOR_ME007_TRIG "ME007 Tri"
|
|
#define D_SENSOR_ME007_RX "ME007 Rx"
|
|
#define D_SENSOR_TUYAMCUBR_TX "TuyaMCUBr Tx"
|
|
#define D_SENSOR_TUYAMCUBR_RX "TuyaMCUBr Rx"
|
|
#define D_SENSOR_BIOPDU_PZEM0XX_TX "BioPDU PZEM0XX Tx"
|
|
#define D_SENSOR_BIOPDU_PZEM016_RX "BioPDU PZEM016 Rx"
|
|
#define D_SENSOR_BIOPDU_BIT "BioPDU Bit"
|
|
#define D_SENSOR_LOX_O2_RX "LoxO2 RX"
|
|
#define D_GPIO_MAGIC_SWITCH "MagicSwitch"
|
|
|
|
// Units
|
|
#define D_UNIT_AMPERE "A"
|
|
#define D_UNIT_CELSIUS "C"
|
|
#define D_UNIT_CENTIMETER "cm"
|
|
#define D_UNIT_DEGREE "°"
|
|
#define D_UNIT_FAHRENHEIT "F"
|
|
#define D_UNIT_FPS "FPS"
|
|
#define D_UNIT_HERTZ "Hz"
|
|
#define D_UNIT_HOUR "hod"
|
|
#define D_UNIT_GALLONS "gal"
|
|
#define D_UNIT_GALLONS_PER_MIN "g/m"
|
|
#define D_UNIT_KILOGRAM "kg"
|
|
#define D_UNIT_GRAM_PER_CUBIC_METER "g/m³"
|
|
#define D_UNIT_INCH_MERCURY "inHg"
|
|
#define D_UNIT_INCREMENTS "inc"
|
|
#define D_UNIT_KELVIN "K"
|
|
#define D_UNIT_KILOMETER "km"
|
|
#define D_UNIT_KILOMETER_PER_HOUR "km/h" // or "km/h"
|
|
#define D_UNIT_KILOOHM "kΩ"
|
|
#define D_UNIT_KILOWATTHOUR "kWh"
|
|
#define D_UNIT_LITERS "L"
|
|
#define D_UNIT_LITERS_PER_MIN "L/m"
|
|
#define D_UNIT_LUX "lx"
|
|
#define D_UNIT_MICROGRAM_PER_CUBIC_METER "µg/m³"
|
|
#define D_UNIT_MICROMETER "µm"
|
|
#define D_UNIT_MICROSECOND "µs"
|
|
#define D_UNIT_MICROSIEMENS_PER_CM "µS/cm"
|
|
#define D_UNIT_MICROTESLA "µT"
|
|
#define D_UNIT_MILLIAMPERE "mA"
|
|
#define D_UNIT_MILLILITERS "ml"
|
|
#define D_UNIT_MILLIMETER "mm"
|
|
#define D_UNIT_MILLIMETER_MERCURY "mmHg"
|
|
#define D_UNIT_MILLISECOND "ms"
|
|
#define D_UNIT_MILLIVOLT "mV"
|
|
#define D_UNIT_MINUTE "min"
|
|
#define D_UNIT_PARTS_PER_BILLION "ppb"
|
|
#define D_UNIT_PARTS_PER_DECILITER "ppd"
|
|
#define D_UNIT_PARTS_PER_MILLION "ppm"
|
|
#define D_UNIT_MILIGRAMS_PER_LITER "mg/L"
|
|
#define D_UNIT_PERCENT "%%"
|
|
#define D_UNIT_PRESSURE "hPa"
|
|
#define D_UNIT_SECOND "sec"
|
|
#define D_UNIT_SECTORS "sektory"
|
|
#define D_UNIT_VA "VA"
|
|
#define D_UNIT_VAR "VAr"
|
|
#define D_UNIT_VOLT "V"
|
|
#define D_UNIT_WATT "W"
|
|
#define D_UNIT_WATTHOUR "Wh"
|
|
#define D_UNIT_WATT_METER_QUADRAT "W/m²"
|
|
#define D_UNIT_LITER_PER_MINUTE "l/min"
|
|
#define D_UNIT_CUBICMETER_PER_HOUR "m³/h"
|
|
#define D_UNIT_CUBIC_METER "m³"
|
|
|
|
#define D_NEW_ADDRESS "Setting address to"
|
|
#define D_OUT_OF_RANGE "Out of Range"
|
|
#define D_SENSOR_DETECTED "detected"
|
|
|
|
//SDM220, SDM120, SDM72, LE01MR, SDM230
|
|
#define D_EXPORT_POWER "Export Power"
|
|
#define D_IMPORT_POWER "Import Power"
|
|
#define D_PHASE_ANGLE "Phase Angle"
|
|
#define D_IMPORT_ACTIVE "Import Active"
|
|
#define D_EXPORT_ACTIVE "Export Active"
|
|
#define D_IMPORT_REACTIVE "Import Reactive"
|
|
#define D_EXPORT_REACTIVE "Export Reactive"
|
|
#define D_TOTAL_REACTIVE "Total Reactive"
|
|
#define D_UNIT_KWARH "kVArh"
|
|
#define D_UNIT_ANGLE "Deg"
|
|
#define D_TOTAL_ACTIVE "Total Active"
|
|
#define D_RESETTABLE_TOTAL_ACTIVE "Total Active (RST)"
|
|
|
|
//SOLAXX1
|
|
#define D_PV1_VOLTAGE "PV1 Voltage"
|
|
#define D_PV1_CURRENT "PV1 Current"
|
|
#define D_PV1_POWER "PV1 Power"
|
|
#define D_PV2_VOLTAGE "PV2 Voltage"
|
|
#define D_PV2_CURRENT "PV2 Current"
|
|
#define D_PV2_POWER "PV2 Power"
|
|
#define D_SOLAR_POWER "Solar Power"
|
|
#define D_INVERTER_POWER "Inverter Power"
|
|
#define D_STATUS "Status"
|
|
#define D_SOLAX_MODE_0 "Waiting"
|
|
#define D_SOLAX_MODE_1 "Checking"
|
|
#define D_SOLAX_MODE_2 "Working"
|
|
#define D_SOLAX_MODE_3 "Failure"
|
|
#define D_SOLAX_MODE_4 "Permanent Failure" // to be translated
|
|
#define D_SOLAX_MODE_5 "Software Update" // to be translated
|
|
#define D_SOLAX_MODE_6 "Selftest" // to be translated
|
|
#define D_SOLAX_ERROR_0 "No Error Code"
|
|
#define D_SOLAX_ERROR_1 "Grid Lost Fault"
|
|
#define D_SOLAX_ERROR_2 "Grid Voltage Fault"
|
|
#define D_SOLAX_ERROR_3 "Grid Frequency Fault"
|
|
#define D_SOLAX_ERROR_4 "Pv Voltage Fault"
|
|
#define D_SOLAX_ERROR_5 "Isolation Fault"
|
|
#define D_SOLAX_ERROR_6 "Over Temperature Fault"
|
|
#define D_SOLAX_ERROR_7 "Fan Fault"
|
|
#define D_SOLAX_ERROR_8 "Other Device Fault"
|
|
|
|
//xdrv_10_scripter.ino
|
|
#define D_CONFIGURE_SCRIPT "Edit script"
|
|
#define D_SCRIPT "edit script"
|
|
#define D_SDCARD_UPLOAD "file upload"
|
|
#define D_UFSDIR "ufs card directory"
|
|
#define D_UPL_DONE "Done"
|
|
#define D_SCRIPT_CHARS_LEFT "chars left"
|
|
#define D_SCRIPT_CHARS_NO_MORE "no more chars"
|
|
#define D_SCRIPT_DOWNLOAD "Download"
|
|
#define D_SCRIPT_ENABLE "script enable"
|
|
#define D_SCRIPT_UPLOAD "Upload"
|
|
#define D_SCRIPT_UPLOAD_FILES "Upload files"
|
|
|
|
//xdrv_50_filesystem.ino
|
|
#define D_MANAGE_FILE_SYSTEM "Manage File system"
|
|
#define D_FS_SIZE "Size"
|
|
#define D_FS_FREE "Free"
|
|
#define D_NEW_FILE "newfile.txt"
|
|
#define D_CREATE_NEW_FILE "Create and edit new file"
|
|
#define D_EDIT_FILE "Edit File"
|
|
#define D_CONFIRM_FILE_DEL "Confirm file deletion"
|
|
#define D_SHOW_HIDDEN_FILES "Show hidden files"
|
|
|
|
//xsns_67_as3935.ino
|
|
#define D_AS3935_GAIN "gain:"
|
|
#define D_AS3935_ENERGY "energy:"
|
|
#define D_AS3935_DISTANCE "distance:"
|
|
#define D_AS3935_DISTURBER "disturber:"
|
|
#define D_AS3935_VRMS "µVrms:"
|
|
#define D_AS3935_APRX "aprx.:"
|
|
#define D_AS3935_AWAY "away"
|
|
#define D_AS3935_LIGHT "lightning"
|
|
#define D_AS3935_OUT "lightning out of range"
|
|
#define D_AS3935_NOT "distance not determined"
|
|
#define D_AS3935_ABOVE "lightning overhead"
|
|
#define D_AS3935_NOISE "noise detected"
|
|
#define D_AS3935_DISTDET "disturber detected"
|
|
#define D_AS3935_INTNOEV "Interrupt with no Event!"
|
|
#define D_AS3935_FLICKER "IRQ flicker!"
|
|
#define D_AS3935_POWEROFF "Power Off"
|
|
#define D_AS3935_NOMESS "listening..."
|
|
#define D_AS3935_ON "On"
|
|
#define D_AS3935_OFF "Off"
|
|
#define D_AS3935_INDOORS "Indoors"
|
|
#define D_AS3935_OUTDOORS "Outdoors"
|
|
#define D_AS3935_CAL_FAIL "calibration failed"
|
|
#define D_AS3935_CAL_OK "calibration set to:"
|
|
|
|
//xsns_68_opentherm.ino
|
|
#define D_SENSOR_BOILER_OT_RX "OpenTherm RX"
|
|
#define D_SENSOR_BOILER_OT_TX "OpenTherm TX"
|
|
|
|
// xnrg_15_teleinfo Denky (Teleinfo)
|
|
#define D_CONTRACT "Contract"
|
|
#define D_POWER_LOAD "Power load"
|
|
#define D_CURRENT_TARIFF "Current Tariff"
|
|
#define D_TARIFF "Tariff"
|
|
#define D_OVERLOAD "ADPS"
|
|
#define D_MAX_POWER "Max Power"
|
|
#define D_MAX_CURRENT "Max Current"
|
|
|
|
// xsns_79_as608.ino
|
|
#define D_FP_ENROLL_PLACEFINGER "Place finger"
|
|
#define D_FP_ENROLL_REMOVEFINGER "Remove finger"
|
|
#define D_FP_ENROLL_PLACESAMEFINGER "Place same finger again"
|
|
#define D_FP_ENROLL_RETRY "Error so retry"
|
|
#define D_FP_ENROLL_RESTART "Restart"
|
|
#define D_FP_ENROLL_ERROR "Error"
|
|
#define D_FP_ENROLL_RESET "Reset"
|
|
#define D_FP_ENROLL_ACTIVE "Active"
|
|
#define D_FP_ENROLL_INACTIVE "Inactive"
|
|
// Indexed by Adafruit_Fingerprint.h defines
|
|
#define D_FP_PACKETRECIEVEERR "Comms error" // 0x01 Error when receiving data package
|
|
#define D_FP_NOFINGER "" // 0x02 No finger on the sensor
|
|
#define D_FP_IMAGEFAIL "Imaging error" // 0x03 Failed to enroll the finger
|
|
#define D_FP_IMAGEMESS "Image too messy" // 0x06 Failed to generate character file due to overly disorderly fingerprint image
|
|
#define D_FP_FEATUREFAIL "Fingerprint too small" // 0x07 Failed to generate character file due to the lack of character point or small fingerprint image
|
|
#define D_FP_NOMATCH "No match" // 0x08 Finger doesn't match
|
|
#define D_FP_NOTFOUND "Did not find a match" // 0x09 Failed to find matching finger
|
|
#define D_FP_ENROLLMISMATCH "Fingerprint did not match" // 0x0A Failed to combine the character files
|
|
#define D_FP_BADLOCATION "Bad location" // 0x0B Addressed PageID is beyond the finger library
|
|
#define D_FP_DBRANGEFAIL "DB range error" // 0x0C Error when reading template from library or invalid template
|
|
#define D_FP_UPLOADFEATUREFAIL "Upload feature error" // 0x0D Error when uploading template
|
|
#define D_FP_PACKETRESPONSEFAIL "Packet response error" // 0x0E Module failed to receive the following data packages
|
|
#define D_FP_UPLOADFAIL "Upload error" // 0x0F Error when uploading image
|
|
#define D_FP_DELETEFAIL "Delete error" // 0x10 Failed to delete the template
|
|
#define D_FP_DBCLEARFAIL "DB Clear error" // 0x11 Failed to clear finger library
|
|
#define D_FP_PASSFAIL "Password error" // 0x13 Find whether the fingerprint passed or failed
|
|
#define D_FP_INVALIDIMAGE "Image invalid" // 0x15 Failed to generate image because of lac of valid primary image
|
|
#define D_FP_FLASHERR "Flash write error" // 0x18 Error when writing flash
|
|
#define D_FP_INVALIDREG "Invalid number" // 0x1A Invalid register number
|
|
#define D_FP_ADDRCODE "Address code" // 0x20 Address code
|
|
#define D_FP_PASSVERIFY "Password verified" // 0x21 Verify the fingerprint passed
|
|
#define D_FP_UNKNOWNERROR "Error" // Any other error
|
|
|
|
// xsns_96_flowratemeter.ino
|
|
#define D_FLOWRATEMETER_NAME "Flowrate"
|
|
#define D_FLOWRATEMETER_AMOUNT_TODAY "Amount Today"
|
|
#define D_FLOWRATEMETER_DURATION_TODAY "Duration Today"
|
|
|
|
// xsns_83_neopool.ino
|
|
#define D_NEOPOOL_MACH_NONE "NeoPool" // Machine names
|
|
#define D_NEOPOOL_MACH_HIDROLIFE "Hidrolife"
|
|
#define D_NEOPOOL_MACH_AQUASCENIC "Aquascenic"
|
|
#define D_NEOPOOL_MACH_OXILIFE "Oxilife"
|
|
#define D_NEOPOOL_MACH_BIONET "Bionet"
|
|
#define D_NEOPOOL_MACH_HIDRONISER "Hidroniser"
|
|
#define D_NEOPOOL_MACH_UVSCENIC "UVScenic"
|
|
#define D_NEOPOOL_MACH_STATION "Station"
|
|
#define D_NEOPOOL_MACH_BRILIX "Brilix"
|
|
#define D_NEOPOOL_MACH_GENERIC "Generic"
|
|
#define D_NEOPOOL_MACH_BAYROL "Bayrol"
|
|
#define D_NEOPOOL_MACH_HAY "Hay"
|
|
#define D_NEOPOOL_FILTRATION_MANUAL "Manual" // Filtration modes
|
|
#define D_NEOPOOL_FILTRATION_AUTO "Auto"
|
|
#define D_NEOPOOL_FILTRATION_HEATING "Heating"
|
|
#define D_NEOPOOL_FILTRATION_SMART "Smart"
|
|
#define D_NEOPOOL_FILTRATION_INTELLIGENT "Intelligent"
|
|
#define D_NEOPOOL_FILTRATION_BACKWASH "Backwash"
|
|
#define D_NEOPOOL_FILTRATION_NONE "" // Filtration speed level
|
|
#define D_NEOPOOL_FILTRATION_SLOW "slow"
|
|
#define D_NEOPOOL_FILTRATION_MEDIUM "medium"
|
|
#define D_NEOPOOL_FILTRATION_FAST "fast"
|
|
#define D_NEOPOOL_TYPE "Type" // Sensor & relais names
|
|
#define D_NEOPOOL_REDOX "Redox"
|
|
#define D_NEOPOOL_CHLORINE "Chlorine"
|
|
#define D_NEOPOOL_CONDUCTIVITY "Conductivity"
|
|
#define D_NEOPOOL_IONIZATION "Ionization"
|
|
#define D_NEOPOOL_HYDROLYSIS "Hydrolysis"
|
|
#define D_NEOPOOL_RELAY "Relay"
|
|
#define D_NEOPOOL_RELAY_FILTRATION "Filtration" // Relay assignment
|
|
#define D_NEOPOOL_RELAY_LIGHT "Light"
|
|
#define D_NEOPOOL_RELAY_PH_ACID "Acid pump"
|
|
#define D_NEOPOOL_RELAY_PH_BASE "Base pump"
|
|
#define D_NEOPOOL_RELAY_RX "Redox level"
|
|
#define D_NEOPOOL_RELAY_CL "Chlorine pump"
|
|
#define D_NEOPOOL_RELAY_CD "Conductivity"
|
|
#define D_NEOPOOL_RELAY_HEATING "Heating"
|
|
#define D_NEOPOOL_RELAY_UV "UV"
|
|
#define D_NEOPOOL_RELAY_VALVE "Valve"
|
|
#define D_NEOPOOL_RELAY_AUX "Aux"
|
|
#define D_NEOPOOL_TIME "Time"
|
|
#define D_NEOPOOL_FILT_MODE "Filtration mode"
|
|
#define D_NEOPOOL_CELL_RUNTIME "Cell runtime"
|
|
#define D_NEOPOOL_POLARIZATION "Pol" // Sensor status
|
|
#define D_NEOPOOL_PR_OFF "PrOff"
|
|
#define D_NEOPOOL_SETPOINT_OK "Ok"
|
|
#define D_NEOPOOL_COVER "Cover"
|
|
#define D_NEOPOOL_SHOCK "Boost"
|
|
#define D_NEOPOOL_STATUS_ON "ON"
|
|
#define D_NEOPOOL_STATUS_OFF "OFF"
|
|
#define D_NEOPOOL_STATUS_WAIT "WAIT"
|
|
#define D_NEOPOOL_STATUS_TANK "TANK"
|
|
#define D_NEOPOOL_STATUS_FLOW "Flow"
|
|
#define D_NEOPOOL_LOW "Low"
|
|
#define D_NEOPOOL_FLOW1 "FL1"
|
|
#define D_NEOPOOL_FLOW2 "FL2"
|
|
#define D_NEOPOOL_PH_HIGH "too high" // ph Alarms
|
|
#define D_NEOPOOL_PH_LOW "too low"
|
|
#define D_NEOPOOL_PUMP_TIME_EXCEEDED "pump time exceeded"
|
|
|
|
// xsns_106_gdk101.ino
|
|
#define D_AVG_RAD_DOSE "průměrná dávka záření"
|
|
#define D_UNIT_US_H "µSv/h"
|
|
|
|
// ixrv92_pipsolar.ino
|
|
#define D_SENSOR_PIPSOLAR_TX "Pipsolar TX"
|
|
#define D_SENSOR_PIPSOLAR_RX "Pipsolar RX"
|
|
|
|
#endif // _LANGUAGE_CS_CZ_H_
|