mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Tasmota/tasmota/tasmota_xdrv_driver/xdrv_23_zigbee_7_0_statemac...

1298 lines
70 KiB
C++
Raw Permalink Blame History

/*
xdrv_23_zigbee.ino - zigbee support for Tasmota
Copyright (C) 2021 Theo Arends and Stephan Hadinger
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_ZIGBEE
// Status code used for ZigbeeStatus MQTT message
// Ex: {"ZbStatus":{"Status": 3,"Message":"Configured, starting coordinator"}}
const uint8_t ZIGBEE_STATUS_OK = 0; // Zigbee started and working
const uint8_t ZIGBEE_STATUS_BOOT = 1; // CC2530 booting
const uint8_t ZIGBEE_STATUS_RESET_CONF = 2; // Resetting CC2530 configuration
const uint8_t ZIGBEE_STATUS_STARTING = 3; // Starting CC2530 as coordinator
const uint8_t ZIGBEE_STATUS_PERMITJOIN_CLOSE = 20; // Disable PermitJoin
const uint8_t ZIGBEE_STATUS_PERMITJOIN_OPEN_60 = 21; // Enable PermitJoin for 60 seconds
const uint8_t ZIGBEE_STATUS_PERMITJOIN_OPEN_XX = 22; // Enable PermitJoin until next boot
const uint8_t ZIGBEE_STATUS_PERMITJOIN_ERROR = 23; // Enable PermitJoin until next boot
const uint8_t ZIGBEE_STATUS_DEVICE_ANNOUNCE = 30; // Device announces its address
const uint8_t ZIGBEE_STATUS_NODE_DESC = 31; // Node descriptor
const uint8_t ZIGBEE_STATUS_ACTIVE_EP = 32; // Endpoints descriptor
const uint8_t ZIGBEE_STATUS_SIMPLE_DESC = 33; // Simple Descriptor (clusters)
const uint8_t ZIGBEE_STATUS_DEVICE_INDICATION = 34; // Device announces its address
const uint8_t ZIGBEE_STATUS_SCANNING = 40; // State change
const uint8_t ZIGBEE_STATUS_CC_VERSION = 50; // Status: CC2530 ZNP Version
const uint8_t ZIGBEE_STATUS_CC_INFO = 51; // Status: CC2530 Device Configuration
const uint8_t ZIGBEE_STATUS_EZ_VERSION = 55; // Status: EFR32 EZ Version
const uint8_t ZIGBEE_STATUS_EZ_INFO = 56; // Status: EFR32 EZ Device Configuration
const uint8_t ZIGBEE_STATUS_UNSUPPORTED_VERSION = 98; // Unsupported ZNP version
const uint8_t ZIGBEE_STATUS_ABORT = 99; // Fatal error, Zigbee not working
typedef union Zigbee_Instruction {
struct {
uint8_t i; // instruction
uint8_t d8; // 8 bits data
uint16_t d16; // 16 bits data
} i;
const void *p; // pointer
} Zigbee_Instruction;
typedef struct Zigbee_Instruction_Type {
uint8_t instr;
uint8_t data;
} Zigbee_Instruction_Type;
enum Zigbee_StateMachine_Instruction_Set {
// 4 bytes instructions
ZGB_INSTR_4_BYTES = 0,
ZGB_INSTR_NOOP = 0, // do nothing
ZGB_INSTR_LABEL, // define a label
ZGB_INSTR_GOTO, // goto label
ZGB_INSTR_ON_ERROR_GOTO, // goto label if error
ZGB_INSTR_ON_TIMEOUT_GOTO, // goto label if timeout
ZGB_INSTR_WAIT, // wait for x ms (in chunks of 100ms)
ZGB_INSTR_WAIT_FOREVER, // wait forever but state machine still active
ZGB_INSTR_STOP, // stop state machine with optional error code
// 8 bytes instructions
ZGB_INSTR_8_BYTES = 0x80,
ZGB_INSTR_CALL = 0x80, // call a function
ZGB_INSTR_LOG, // log a message, if more detailed logging required, call a function
ZGB_INSTR_MQTT_STATE, // send MQTT status string with code
ZGB_INSTR_SEND, // send a ZNP message
ZGB_INSTR_WAIT_UNTIL, // wait until the specified message is received, ignore all others
ZGB_INSTR_WAIT_RECV, // wait for a message according to the filter
ZGB_ON_RECV_UNEXPECTED, // function to handle unexpected messages, or nullptr
// 12 bytes instructions
ZGB_INSTR_12_BYTES = 0xF0,
ZGB_INSTR_WAIT_UNTIL_CALL, // wait until the specified message is received and call function upon receive, ignore all others
ZGB_INSTR_WAIT_RECV_CALL, // wait for a filtered message and call function upon receive
};
#define ZI_NOOP() { .i = { ZGB_INSTR_NOOP, 0x00, 0x0000} },
#define ZI_LABEL(x) { .i = { ZGB_INSTR_LABEL, (x), 0x0000} },
#define ZI_GOTO(x) { .i = { ZGB_INSTR_GOTO, (x), 0x0000} },
#define ZI_ON_ERROR_GOTO(x) { .i = { ZGB_INSTR_ON_ERROR_GOTO, (x), 0x0000} },
#define ZI_ON_TIMEOUT_GOTO(x) { .i = { ZGB_INSTR_ON_TIMEOUT_GOTO, (x), 0x0000} },
#define ZI_WAIT(x) { .i = { ZGB_INSTR_WAIT, 0x00, (x)} },
#define ZI_WAIT_FOREVER() { .i = { ZGB_INSTR_WAIT_FOREVER, 0x00, 0x0000} },
#define ZI_STOP(x) { .i = { ZGB_INSTR_STOP, (x), 0x0000} },
#define ZI_CALL(f, x) { .i = { ZGB_INSTR_CALL, (x), 0x0000} }, { .p = (const void*)(f) },
// #define ZI_CALL2(f, x, y) { .i = { ZGB_INSTR_CALL, (x), (y)} }, { .p = (const void*)(f) },
#define ZI_LOG(x, m) { .i = { ZGB_INSTR_LOG, (x), 0x0000 } }, { .p = ((const void*)(m)) },
#define ZI_MQTT_STATE(x, m) { .i = { ZGB_INSTR_MQTT_STATE, (x), 0x0000 } }, { .p = ((const void*)(m)) },
#define ZI_ON_RECV_UNEXPECTED(f) { .i = { ZGB_ON_RECV_UNEXPECTED, 0x00, 0x0000} }, { .p = (const void*)(f) },
#define ZI_SEND(m) { .i = { ZGB_INSTR_SEND, sizeof(m), 0x0000} }, { .p = (const void*)(m) },
#define ZI_WAIT_RECV(x, m) { .i = { ZGB_INSTR_WAIT_RECV, sizeof(m), (x)} }, { .p = (const void*)(m) },
#define ZI_WAIT_UNTIL(x, m) { .i = { ZGB_INSTR_WAIT_UNTIL, sizeof(m), (x)} }, { .p = (const void*)(m) },
#define ZI_WAIT_UNTIL_FUNC(x, m, f) { .i = { ZGB_INSTR_WAIT_UNTIL_CALL, sizeof(m), (x)} }, { .p = (const void*)(m) }, { .p = (const void*)(f) },
#define ZI_WAIT_RECV_FUNC(x, m, f) { .i = { ZGB_INSTR_WAIT_RECV_CALL, sizeof(m), (x)} }, { .p = (const void*)(m) }, { .p = (const void*)(f) },
/*********************************************************************************************\
* State Machine
\*********************************************************************************************/
#define Z_B0(a) (uint8_t)( ((a) ) & 0xFF )
#define Z_B1(a) (uint8_t)( ((a) >> 8) & 0xFF )
#define Z_B2(a) (uint8_t)( ((a) >> 16) & 0xFF )
#define Z_B3(a) (uint8_t)( ((a) >> 24) & 0xFF )
#define Z_B4(a) (uint8_t)( ((a) >> 32) & 0xFF )
#define Z_B5(a) (uint8_t)( ((a) >> 40) & 0xFF )
#define Z_B6(a) (uint8_t)( ((a) >> 48) & 0xFF )
#define Z_B7(a) (uint8_t)( ((a) >> 56) & 0xFF )
// Macro to define message to send and receive
#define ZBM(n, x...) const uint8_t n[] PROGMEM = { x };
// For commands that need to be changed with configuration, ZBR stores in RAM, and ZBW write new values
#define ZBR(n, x...) uint8_t n[] = { x }; // same but in RAM to be modified
#define ZBW(n, x...) { const uint8_t n##t[] = { x }; memcpy(n, n##t, sizeof(n)); } // re-write content in RAM
#define USE_ZIGBEE_CHANNEL_MASK (1 << (USE_ZIGBEE_CHANNEL))
const char kCheckingDeviceConfiguration[] PROGMEM = D_LOG_ZIGBEE "checking device configuration";
const char kConfiguredCoord[] PROGMEM = "Configured, starting coordinator";
const char kConfiguredRouter[] PROGMEM = "Configured, starting router";
const char kConfiguredDevice[] PROGMEM = "Configured, starting device";
const char kStarted[] PROGMEM = "Started";
const char kZigbeeStarted[] PROGMEM = D_LOG_ZIGBEE "Zigbee started";
const char kResetting[] PROGMEM = "Resetting configuration";
const char kResettingDevice[] PROGMEM = D_LOG_ZIGBEE "Resetting EZSP device";
const char kReconfiguringDevice[] PROGMEM = D_LOG_ZIGBEE "Factory reset EZSP device";
const char kZNP123[] PROGMEM = "Only ZNP 1.2 and 3.x are currently supported";
const char kEZ8[] PROGMEM = "Only EZSP protocol v8 is currently supported";
const char kAbort[] PROGMEM = "Abort";
const char kZigbeeAbort[] PROGMEM = D_LOG_ZIGBEE "Abort";
const char kZigbeeGroup0[] PROGMEM = D_LOG_ZIGBEE "Subscribe to group 0 'ZbListen0 0'";
#ifdef USE_ZIGBEE_ZNP
// ZBS_* Zigbee Send
// ZBR_* Zigbee Recv
ZBM(ZBS_RESET, Z_AREQ | Z_SYS, SYS_RESET, 0x00 ) // 410001 SYS_RESET_REQ Hardware reset
ZBM(ZBR_RESET, Z_AREQ | Z_SYS, SYS_RESET_IND ) // 4180 SYS_RESET_REQ Hardware reset response
ZBM(ZBS_VERSION, Z_SREQ | Z_SYS, SYS_VERSION ) // 2102 Z_SYS:version
ZBM(ZBR_VERSION, Z_SRSP | Z_SYS, SYS_VERSION ) // 6102 Z_SYS:version
// Check if ZNP_HAS_CONFIGURED is set
ZBR(ZBS_ZNPHC, Z_SREQ | Z_SYS, SYS_OSAL_NV_READ, ZNP_HAS_CONFIGURED & 0xFF, ZNP_HAS_CONFIGURED >> 8, 0x00 /* offset */ ) // 2108000F00 - 6108000155
ZBM(ZBR_ZNPHC, Z_SRSP | Z_SYS, SYS_OSAL_NV_READ, Z_SUCCESS, 0x01 /* len */, 0x55) // 6108000155
// If not set, the response is 61-08-02-00 = Z_SRSP | Z_SYS, SYS_OSAL_NV_READ, Z_INVALIDPARAMETER, 0x00 /* len */
ZBM(ZBS_PAN, Z_SREQ | Z_SYS, SYS_OSAL_NV_READ, CONF_PANID,0x00, 0x00 ) // 2108830000
ZBR(ZBR_PAN, Z_SRSP | Z_SYS, SYS_OSAL_NV_READ, Z_SUCCESS, 0x02 /* len */,
0x00, 0x00 /* pan_id */ ) // 61080002xxxx
ZBM(ZBS_EXTPAN, Z_SREQ | Z_SYS, SYS_OSAL_NV_READ, CONF_EXTENDED_PAN_ID,0x00, 0x00 ) // 21082D0000
ZBR(ZBR_EXTPAN, Z_SRSP | Z_SYS, SYS_OSAL_NV_READ, Z_SUCCESS,
0x08 /* len */,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ext_pan_id */
) // 61080008xxxxxxxxxxxxxxxx
ZBM(ZBS_CHANN, Z_SREQ | Z_SYS, SYS_OSAL_NV_READ, CONF_CHANLIST,0x00, 0x00 ) // 2108840000
ZBR(ZBR_CHANN, Z_SRSP | Z_SYS, SYS_OSAL_NV_READ, Z_SUCCESS,
0x04 /* len */,
Z_B0(USE_ZIGBEE_CHANNEL_MASK), Z_B1(USE_ZIGBEE_CHANNEL_MASK), Z_B2(USE_ZIGBEE_CHANNEL_MASK), Z_B3(USE_ZIGBEE_CHANNEL_MASK),
) // 61080004xxxxxxxx
ZBM(ZBS_PFGK, Z_SREQ | Z_SAPI, SAPI_READ_CONFIGURATION, CONF_PRECFGKEY ) // 260462
ZBR(ZBR_PFGK, Z_SRSP | Z_SAPI, SAPI_READ_CONFIGURATION, Z_SUCCESS, CONF_PRECFGKEY,
0x10 /* len */,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* key_l */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* key_h */
/*0x01, 0x03, 0x05, 0x07, 0x09, 0x0B, 0x0D, 0x0F,
0x00, 0x02, 0x04, 0x06, 0x08, 0x0A, 0x0C, 0x0D*/ ) // 660400621001030507090B0D0F00020406080A0C0D
ZBM(ZBS_PFGK3, Z_SREQ | Z_SYS, SYS_OSAL_NV_READ, CONF_PRECFGKEY,0x00, 0x00 ) // 2108620000
ZBR(ZBR_PFGK3, Z_SRSP | Z_SYS, SYS_OSAL_NV_READ, Z_SUCCESS,
0x10 /* len */,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* key_l */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* key_h */
/*0x01, 0x03, 0x05, 0x07, 0x09, 0x0B, 0x0D, 0x0F,
0x00, 0x02, 0x04, 0x06, 0x08, 0x0A, 0x0C, 0x0D*/ ) // 6108001001030507090B0D0F00020406080A0C0D
ZBM(ZBS_PFGKEN, Z_SREQ | Z_SYS, SYS_OSAL_NV_READ, CONF_PRECFGKEYS_ENABLE,0x00, 0x00 ) // 2108630000
ZBM(ZBR_PFGKEN, Z_SRSP | Z_SYS, SYS_OSAL_NV_READ, Z_SUCCESS,
0x01 /* len */, 0x00 ) // 6108000100
ZBM(ZBS_LOGTYPE, Z_SREQ | Z_SYS, SYS_OSAL_NV_READ, CONF_LOGICAL_TYPE,0x00, 0x00 ) // 2108870000
ZBM(ZBS_LOGTYPE_COORD, Z_SRSP | Z_SYS, SYS_OSAL_NV_READ, Z_SUCCESS,
0x01 /* len */, 0x00 ) // 6108000100 - coordinator
ZBM(ZBS_LOGTYPE_ROUTER, Z_SRSP | Z_SYS, SYS_OSAL_NV_READ, Z_SUCCESS,
0x01 /* len */, 0x01 ) // 6108000101 - router
ZBM(ZBS_LOGTYPE_DEVICE, Z_SRSP | Z_SYS, SYS_OSAL_NV_READ, Z_SUCCESS,
0x01 /* len */, 0x02 ) // 6108000102 - device
// commands to "format" the device
// Write configuration - write success
ZBM(ZBR_WNV_OK, Z_SRSP | Z_SYS, SYS_OSAL_NV_WRITE, Z_SUCCESS ) // 610900 - NV Write
ZBM(ZBR_WNV_OKE, Z_SRSP | Z_SYS, SYS_OSAL_NV_WRITE ) // 6109xx - NV Write, OK or error
// Factory reset
ZBM(ZBS_FACTRES, Z_SREQ | Z_SYS, SYS_OSAL_NV_WRITE, CONF_STARTUP_OPTION,0x00, 0x00, 0x01 /* len */, 0x03 ) // 21090300000103
// Write PAN ID
ZBR(ZBS_W_PAN, Z_SREQ | Z_SYS, SYS_OSAL_NV_WRITE, CONF_PANID,0x00, 0x00, 0x02 /* len */, 0x00, 0x00 /* pan_id */ ) // 210983000002xxxx
// Write Universal PAN ID
ZBR(ZBS_W_ALL_PAN, Z_SREQ | Z_SYS, SYS_OSAL_NV_WRITE, CONF_PANID,0x00, 0x00, 0x02 /* len */, Z_B0(0xFFFF), Z_B1(0xFFFF) ) // 210983000002FFFF
// Write EXT PAN ID
ZBR(ZBS_W_EXTPAN, Z_SREQ | Z_SYS, SYS_OSAL_NV_WRITE, CONF_EXTENDED_PAN_ID,0x00, 0x00, 0x08 /* len */,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ext_pan_id */
) // 21092D0000086263151D004B1200
// Write Channel ID
ZBR(ZBS_W_CHANN, Z_SREQ | Z_SYS, SYS_OSAL_NV_WRITE, CONF_CHANLIST,0x00, 0x00, 0x04 /* len */,
Z_B0(USE_ZIGBEE_CHANNEL_MASK), Z_B1(USE_ZIGBEE_CHANNEL_MASK), Z_B2(USE_ZIGBEE_CHANNEL_MASK), Z_B3(USE_ZIGBEE_CHANNEL_MASK),
/*0x00, 0x08, 0x00, 0x00*/ ) // 210984000004xxxxxxxx
// Write All Channels
const uint32_t ZB_ALL_CHANNELS = 0x07FFF800;
ZBR(ZBS_W_ALL_CHANN, Z_SREQ | Z_SYS, SYS_OSAL_NV_WRITE, CONF_CHANLIST,0x00, 0x00, 0x04 /* len */,
Z_B0(ZB_ALL_CHANNELS), Z_B1(ZB_ALL_CHANNELS), Z_B2(ZB_ALL_CHANNELS), Z_B3(ZB_ALL_CHANNELS),
/*0x00, 0x08, 0x00, 0x00*/ ) // 21098400000400F8FF7F
// Configure BDB Channels
ZBR(ZBS_W_BDB_CHANN, Z_SREQ | Z_APP_CNF, Z_APP_CNF_BDB_SET_CHANNEL, 0x01 /*primary*/,
Z_B0(USE_ZIGBEE_CHANNEL_MASK), Z_B1(USE_ZIGBEE_CHANNEL_MASK), Z_B2(USE_ZIGBEE_CHANNEL_MASK), Z_B3(USE_ZIGBEE_CHANNEL_MASK),
/*0x00, 0x08, 0x00, 0x00*/ ) // 2F0801xxxxxxxx
// Configure BDB Channels secondary channel to zeroes
ZBM(ZBS_W_BDB_CHANN2, Z_SREQ | Z_APP_CNF, Z_APP_CNF_BDB_SET_CHANNEL, 0x00 /*secondary*/,
0x00, 0x08, 0x00, 0x00 ) // 2F080000000000
ZBM(ZBR_W_BDB_CHANN_OK, Z_SRSP | Z_APP_CNF, Z_APP_CNF_BDB_SET_CHANNEL, Z_SUCCESS ) // 6F0800
// Write Logical Type = 00 = coordinator
ZBM(ZBS_W_LOGTYP_COORD, Z_SREQ | Z_SYS, SYS_OSAL_NV_WRITE, CONF_LOGICAL_TYPE,0x00, 0x00, 0x01 /* len */, 0x00 ) // 21098700000100
// Write Logical Type = 01 = router
ZBM(ZBS_W_LOGTYP_ROUTER, Z_SREQ | Z_SYS, SYS_OSAL_NV_WRITE, CONF_LOGICAL_TYPE,0x00, 0x00, 0x01 /* len */, 0x01 ) // 21098700000101
// Write Logical Type = 02 = device
ZBM(ZBS_W_LOGTYP_DEVICE, Z_SREQ | Z_SYS, SYS_OSAL_NV_WRITE, CONF_LOGICAL_TYPE,0x00, 0x00, 0x01 /* len */, 0x02 ) // 21098700000102
// Write precfgkey
ZBR(ZBS_W_PFGK, Z_SREQ | Z_SYS, SYS_OSAL_NV_WRITE, CONF_PRECFGKEY,0x00, 0x00,
0x10 /* len */,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* key_l */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* key_h */ /*0x01, 0x03, 0x05, 0x07, 0x09, 0x0B, 0x0D, 0x0F,
0x00, 0x02, 0x04, 0x06, 0x08, 0x0A, 0x0C, 0x0D*/ ) // 21096200001001030507090B0D0F00020406080A0C0D
// Write precfgkey enable
ZBM(ZBS_W_PFGKEN, Z_SREQ | Z_SYS, SYS_OSAL_NV_WRITE, CONF_PRECFGKEYS_ENABLE,0x00, 0x00, 0x01 /* len */, 0x00 ) // 21096300000100
// Write Security Mode
ZBM(ZBS_WNV_SECMODE, Z_SREQ | Z_SYS, SYS_OSAL_NV_WRITE, Z_B0(CONF_TCLK_TABLE_START), Z_B1(CONF_TCLK_TABLE_START),
0x00 /* offset */, 0x20 /* len */,
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
0x5a, 0x69, 0x67, 0x42, 0x65, 0x65, 0x41, 0x6c,
0x6c, 0x69, 0x61, 0x6e, 0x63, 0x65, 0x30, 0x39,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00) // 2109010100200FFFFFFFFFFFFFFFF5A6967426565416C6C69616E636530390000000000000000
// Write Z_ZDO Direct CB
ZBM(ZBS_W_ZDODCB, Z_SREQ | Z_SYS, SYS_OSAL_NV_WRITE, CONF_ZDO_DIRECT_CB,0x00, 0x00, 0x01 /* len */, 0x01 ) // 21098F00000101
// NV Init ZNP Has Configured
ZBR(ZBS_WNV_INITZNPHC, Z_SREQ | Z_SYS, SYS_OSAL_NV_ITEM_INIT, ZNP_HAS_CONFIGURED & 0xFF, ZNP_HAS_CONFIGURED >> 8,
0x01, 0x00 /* InitLen 16 bits */, 0x01 /* len */, 0x00 ) // 2107000F01000100 - 610709
// Init succeeded
//ZBM(ZBR_WNV_INIT_OK, Z_SRSP | Z_SYS, SYS_OSAL_NV_ITEM_INIT, Z_CREATED ) // 610709 - NV Write
ZBM(ZBR_WNV_INIT_OK, Z_SRSP | Z_SYS, SYS_OSAL_NV_ITEM_INIT ) // 6107xx, Success if 610700 or 610709 - NV Write
// Write ZNP Has Configured
ZBR(ZBS_WNV_ZNPHC, Z_SREQ | Z_SYS, SYS_OSAL_NV_WRITE, Z_B0(ZNP_HAS_CONFIGURED), Z_B1(ZNP_HAS_CONFIGURED),
0x00 /* offset */, 0x01 /* len */, 0x55 ) // 2109000F000155 - 610900
// Z_ZDO:startupFromApp
ZBM(ZBS_STARTUPFROMAPP, Z_SREQ | Z_ZDO, ZDO_STARTUP_FROM_APP, 100, 0 /* delay */) // 25406400
ZBM(ZBR_STARTUPFROMAPP, Z_SRSP | Z_ZDO, ZDO_STARTUP_FROM_APP ) // 6540 + 01 for new network, 00 for exisitng network, 02 for error
ZBM(AREQ_STARTUPFROMAPP, Z_AREQ | Z_ZDO, ZDO_STATE_CHANGE_IND ) // 45C00xx - state change
ZBM(AREQ_STARTUPFROMAPP_COORD, Z_AREQ | Z_ZDO, ZDO_STATE_CHANGE_IND, ZDO_DEV_ZB_COORD ) // 45C009 + 08 = starting, 09 = started
ZBM(AREQ_STARTUPFROMAPP_ROUTER, Z_AREQ | Z_ZDO, ZDO_STATE_CHANGE_IND, ZDO_DEV_ROUTER ) // 45C009 + 02 = looking PanID, 07 = started
ZBM(AREQ_STARTUPFROMAPP_DEVICE, Z_AREQ | Z_ZDO, ZDO_STATE_CHANGE_IND, ZDO_DEV_END_DEVICE ) // 45C009 + 02 = looking PanID, 06 = started
// BDB START Commissioning
ZBM(ZBS_BDB_START_COMMIS, Z_SREQ | Z_APP_CNF, Z_APP_CNF_BDB_START_COMMISSIONING, 0x04 /*mode*/) // 2F0504
ZBM(ZBR_BDB_START_COMMIS, Z_SRSP | Z_APP_CNF, Z_APP_CNF_BDB_START_COMMISSIONING, Z_SUCCESS) // 6F0500
// GetDeviceInfo
ZBM(ZBS_GETDEVICEINFO, Z_SREQ | Z_UTIL, Z_UTIL_GET_DEVICE_INFO ) // 2700
ZBM(ZBR_GETDEVICEINFO, Z_SRSP | Z_UTIL, Z_UTIL_GET_DEVICE_INFO, Z_SUCCESS ) // Ex= 6700.00.6263151D004B1200.0000.07.09.00
// IEEE Adr (8 bytes) = 6263151D004B1200
// Short Addr (2 bytes) = 0000
// Device Type (1 byte) = 07 (coord?)
// Device State (1 byte) = 09 (coordinator started)
// NumAssocDevices (1 byte) = 00
// Read Pan ID
//ZBM(ZBS_READ_NV_PANID, Z_SREQ | Z_SYS, SYS_OSAL_NV_READ, PANID & 0xFF, PANID >> 8, 0x00 /* offset */ ) // 2108830000
// Z_ZDO:nodeDescReq
ZBM(ZBS_ZDO_NODEDESCREQ, Z_SREQ | Z_ZDO, ZDO_NODE_DESC_REQ, 0x00, 0x00 /* dst addr */, 0x00, 0x00 /* NWKAddrOfInterest */) // 250200000000
ZBM(ZBR_ZDO_NODEDESCREQ, Z_SRSP | Z_ZDO, ZDO_NODE_DESC_REQ, Z_SUCCESS ) // 650200
// Async resp ex: 4582.0000.00.0000.00.40.8F.0000.50.A000.0100.A000.00
ZBM(AREQ_ZDO_NODEDESCRSP, Z_AREQ | Z_ZDO, ZDO_NODE_DESC_RSP) // 4582
// SrcAddr (2 bytes) 0000
// Status (1 byte) 00 Success
// NwkAddr (2 bytes) 0000
// LogicalType (1 byte) - 00 Coordinator
// APSFlags (1 byte) - 40 0=APSFlags 4=NodeFreqBands
// MACCapabilityFlags (1 byte) - 8F ALL
// ManufacturerCode (2 bytes) - 0000
// MaxBufferSize (1 byte) - 50 NPDU
// MaxTransferSize (2 bytes) - A000 = 160
// ServerMask (2 bytes) - 0100 - Primary Trust Center
// MaxOutTransferSize (2 bytes) - A000 = 160
// DescriptorCapabilities (1 byte) - 00
// Z_ZDO:activeEpReq
ZBM(ZBS_ZDO_ACTIVEEPREQ, Z_SREQ | Z_ZDO, ZDO_ACTIVE_EP_REQ, 0x00, 0x00, 0x00, 0x00) // 250500000000
ZBM(ZBR_ZDO_ACTIVEEPREQ, Z_SRSP | Z_ZDO, ZDO_ACTIVE_EP_REQ, Z_SUCCESS) // 65050000
// ZBM(ZBR_ZDO_ACTIVEEPRSP_NONE, Z_AREQ | Z_ZDO, ZDO_ACTIVE_EP_RSP, 0x00, 0x00 /* srcAddr */, Z_SUCCESS,
// 0x00, 0x00 /* nwkaddr */, 0x00 /* activeepcount */) // 45050000 - no Ep running
// Change #14819 - we now allow some EP to be alreaady declared
ZBM(ZBR_ZDO_ACTIVEEPRSP_SUCESS, Z_AREQ | Z_ZDO, ZDO_ACTIVE_EP_RSP, 0x00, 0x00 /* srcAddr */, Z_SUCCESS) // 45050000xxxx - no Ep running
ZBM(ZBR_ZDO_ACTIVEEPRSP_OK, Z_AREQ | Z_ZDO, ZDO_ACTIVE_EP_RSP, 0x00, 0x00 /* srcAddr */, Z_SUCCESS,
0x00, 0x00 /* nwkaddr */, 0x03 /* activeepcount */, 0xF2, 0x0B, 0x01 /* the actual endpoints */) // 4585000000000003F20B01
// Z_AF:register profile:104, ep:01
ZBM(ZBS_AF_REGISTER01, Z_SREQ | Z_AF, AF_REGISTER, 0x01 /* endpoint */, Z_B0(Z_PROF_HA), Z_B1(Z_PROF_HA), // 24000401050000000000
0x05, 0x00 /* AppDeviceId */, 0x00 /* AppDevVer */, 0x00 /* LatencyReq */,
0x00 /* AppNumInClusters */, 0x00 /* AppNumOutClusters */)
ZBM(ZBR_AF_REGISTER, Z_SRSP | Z_AF, AF_REGISTER, Z_SUCCESS) // 640000
ZBM(ZBR_AF_REGISTER_NOERROR, Z_SRSP | Z_AF, AF_REGISTER) // 6400xx -- don't abort if an error occurs
ZBM(ZBS_AF_REGISTER0B, Z_SREQ | Z_AF, AF_REGISTER, 0x0B /* endpoint */, Z_B0(Z_PROF_HA), Z_B1(Z_PROF_HA), // 2400040B050000000000
0x05, 0x00 /* AppDeviceId */, 0x00 /* AppDevVer */, 0x00 /* LatencyReq */,
0x00 /* AppNumInClusters */, 0x00 /* AppNumOutClusters */)
// Green Power endpoint 242 0xF2
ZBM(ZBS_AF_REGISTERF2, Z_SREQ | Z_AF, AF_REGISTER, 0xF2 /* endpoint */, Z_B0(Z_PROF_GP), Z_B1(Z_PROF_GP), //
0x05, 0x61 /* AppDeviceId */, 0x00 /* AppDevVer */, 0x00 /* LatencyReq */,
0x00 /* AppNumInClusters */,
0x01 /* AppNumOutClusters */,
0x21,0x00) // 0x0021
// Z_AF:register profile:104, ep:01 - main clusters for router or device
ZBM(ZBS_AF_REGISTER_ALL, Z_SREQ | Z_AF, AF_REGISTER, 0x01 /* endpoint */, Z_B0(Z_PROF_HA), Z_B1(Z_PROF_HA), // 24000401050000000000
0x05, 0x00 /* AppDeviceId */, 0x00 /* AppDevVer */, 0x00 /* LatencyReq */,
0x0E /* AppNumInClusters */, // actually all clusters will be received
0x00,0x00, 0x04,0x00, 0x05,0x00, 0x06,0x00, // 0x0000, 0x0004, 0x0005, 0x0006
0x07,0x00, 0x08,0x00, 0x0A,0x00, 0x02,0x01, // 0x0007, 0x0008, 0x000A, 0X0102
0x00,0x03, 0x00,0x04, 0x02,0x04, 0x03,0x04, // 0x0300, 0x0400, 0x0402, 0x0403
0x05,0x04, 0x06,0x04, // 0x0405, 0x0406
0x00 /* AppNumOutClusters */)
// Z_ZDO:mgmtPermitJoinReq
ZBM(ZBS_PERMITJOINREQ_CLOSE, Z_SREQ | Z_ZDO, ZDO_MGMT_PERMIT_JOIN_REQ, 0x02 /* AddrMode */, // 25360200000000
0x00, 0x00 /* DstAddr */, 0x00 /* Duration */, 0x00 /* TCSignificance */)
ZBM(ZBR_PERMITJOINREQ, Z_SRSP | Z_ZDO, ZDO_MGMT_PERMIT_JOIN_REQ, Z_SUCCESS) // 653600
ZBM(ZBR_PERMITJOIN_AREQ_RSP, Z_AREQ | Z_ZDO, ZDO_MGMT_PERMIT_JOIN_RSP, 0x00, 0x00 /* srcAddr*/, Z_SUCCESS ) // 45B6000000
// Update the relevant commands with Settings
void ZNP_UpdateConfig(uint8_t zb_channel, uint16_t zb_pan_id, uint64_t zb_ext_panid, uint64_t zb_precfgkey_l, uint64_t zb_precfgkey_h) {
uint32_t zb_channel_mask = (1 << zb_channel);
ZBW(ZBR_PAN, Z_SRSP | Z_SYS, SYS_OSAL_NV_READ, Z_SUCCESS, 0x02 /* len */,
Z_B0(zb_pan_id), Z_B1(zb_pan_id) ) // 61080002xxxx
ZBW(ZBR_EXTPAN, Z_SRSP | Z_SYS, SYS_OSAL_NV_READ, Z_SUCCESS,
0x08 /* len */,
Z_B0(zb_ext_panid), Z_B1(zb_ext_panid), Z_B2(zb_ext_panid), Z_B3(zb_ext_panid),
Z_B4(zb_ext_panid), Z_B5(zb_ext_panid), Z_B6(zb_ext_panid), Z_B7(zb_ext_panid),
) // 61080008xxxxxxxxxxxxxxxx
ZBW(ZBR_CHANN, Z_SRSP | Z_SYS, SYS_OSAL_NV_READ, Z_SUCCESS,
0x04 /* len */,
Z_B0(zb_channel_mask), Z_B1(zb_channel_mask), Z_B2(zb_channel_mask), Z_B3(zb_channel_mask),
) // 61080004xxxxxxxx
// Zstack 1.2
ZBW(ZBR_PFGK, Z_SRSP | Z_SAPI, SAPI_READ_CONFIGURATION, Z_SUCCESS, CONF_PRECFGKEY,
0x10 /* len */,
Z_B0(zb_precfgkey_l), Z_B1(zb_precfgkey_l), Z_B2(zb_precfgkey_l), Z_B3(zb_precfgkey_l),
Z_B4(zb_precfgkey_l), Z_B5(zb_precfgkey_l), Z_B6(zb_precfgkey_l), Z_B7(zb_precfgkey_l),
Z_B0(zb_precfgkey_h), Z_B1(zb_precfgkey_h), Z_B2(zb_precfgkey_h), Z_B3(zb_precfgkey_h),
Z_B4(zb_precfgkey_h), Z_B5(zb_precfgkey_h), Z_B6(zb_precfgkey_h), Z_B7(zb_precfgkey_h),
/*0x01, 0x03, 0x05, 0x07, 0x09, 0x0B, 0x0D, 0x0F,
0x00, 0x02, 0x04, 0x06, 0x08, 0x0A, 0x0C, 0x0D*/ ) // 660400621001030507090B0D0F00020406080A0C0D
// ZStack 3
ZBW(ZBR_PFGK3, Z_SRSP | Z_SYS, SYS_OSAL_NV_READ, Z_SUCCESS,
0x10 /* len */,
Z_B0(zb_precfgkey_l), Z_B1(zb_precfgkey_l), Z_B2(zb_precfgkey_l), Z_B3(zb_precfgkey_l),
Z_B4(zb_precfgkey_l), Z_B5(zb_precfgkey_l), Z_B6(zb_precfgkey_l), Z_B7(zb_precfgkey_l),
Z_B0(zb_precfgkey_h), Z_B1(zb_precfgkey_h), Z_B2(zb_precfgkey_h), Z_B3(zb_precfgkey_h),
Z_B4(zb_precfgkey_h), Z_B5(zb_precfgkey_h), Z_B6(zb_precfgkey_h), Z_B7(zb_precfgkey_h),
/*0x01, 0x03, 0x05, 0x07, 0x09, 0x0B, 0x0D, 0x0F,
0x00, 0x02, 0x04, 0x06, 0x08, 0x0A, 0x0C, 0x0D*/ ) // 6108001001030507090B0D0F00020406080A0C0D
ZBW(ZBS_W_PAN, Z_SREQ | Z_SYS, SYS_OSAL_NV_WRITE, CONF_PANID,0x00, 0x00, 0x02 /* len */, Z_B0(zb_pan_id), Z_B1(zb_pan_id) ) // 210983000002xxxx
// Write EXT PAN ID
ZBW(ZBS_W_EXTPAN, Z_SREQ | Z_SYS, SYS_OSAL_NV_WRITE, CONF_EXTENDED_PAN_ID,0x00, 0x00, 0x08 /* len */,
Z_B0(zb_ext_panid), Z_B1(zb_ext_panid), Z_B2(zb_ext_panid), Z_B3(zb_ext_panid),
Z_B4(zb_ext_panid), Z_B5(zb_ext_panid), Z_B6(zb_ext_panid), Z_B7(zb_ext_panid)
) // 21092D0000086263151D004B1200
// Write Channel ID
ZBW(ZBS_W_CHANN, Z_SREQ | Z_SYS, SYS_OSAL_NV_WRITE, CONF_CHANLIST,0x00, 0x00, 0x04 /* len */,
Z_B0(zb_channel_mask), Z_B1(zb_channel_mask), Z_B2(zb_channel_mask), Z_B3(zb_channel_mask),
/*0x00, 0x08, 0x00, 0x00*/ ) // 210984000004xxxxxxxx
// Write BDB Channel ID - ZStack3 specific
ZBW(ZBS_W_BDB_CHANN, Z_SREQ | Z_APP_CNF, Z_APP_CNF_BDB_SET_CHANNEL, 0x01 /*primary*/,
Z_B0(zb_channel_mask), Z_B1(zb_channel_mask), Z_B2(zb_channel_mask), Z_B3(zb_channel_mask),
/*0x00, 0x08, 0x00, 0x00*/ ) // 2F0801xxxxxxxx
// Write precfgkey
ZBW(ZBS_W_PFGK, Z_SREQ | Z_SYS, SYS_OSAL_NV_WRITE, CONF_PRECFGKEY,0x00, 0x00,
0x10 /* len */,
Z_B0(zb_precfgkey_l), Z_B1(zb_precfgkey_l), Z_B2(zb_precfgkey_l), Z_B3(zb_precfgkey_l),
Z_B4(zb_precfgkey_l), Z_B5(zb_precfgkey_l), Z_B6(zb_precfgkey_l), Z_B7(zb_precfgkey_l),
Z_B0(zb_precfgkey_h), Z_B1(zb_precfgkey_h), Z_B2(zb_precfgkey_h), Z_B3(zb_precfgkey_h),
Z_B4(zb_precfgkey_h), Z_B5(zb_precfgkey_h), Z_B6(zb_precfgkey_h), Z_B7(zb_precfgkey_h),
) // 21096200001001030507090B0D0F00020406080A0C0D
}
// Update configuration for ZStack 3
void ZNP_UpdateZStack3(void) {
ZBW(ZBS_ZNPHC, Z_SREQ | Z_SYS, SYS_OSAL_NV_READ, ZNP_HAS_CONFIGURED3 & 0xFF, ZNP_HAS_CONFIGURED3 >> 8, 0x00 /* offset */ ) // 2108000F00 - 6108000155
ZBW(ZBS_WNV_INITZNPHC, Z_SREQ | Z_SYS, SYS_OSAL_NV_ITEM_INIT, ZNP_HAS_CONFIGURED3 & 0xFF, ZNP_HAS_CONFIGURED3 >> 8,
0x01, 0x00 /* InitLen 16 bits */, 0x01 /* len */, 0x00 ) // 2107000F01000100 - 610709
ZBW(ZBS_WNV_ZNPHC, Z_SREQ | Z_SYS, SYS_OSAL_NV_WRITE, Z_B0(ZNP_HAS_CONFIGURED3), Z_B1(ZNP_HAS_CONFIGURED3),
0x00 /* offset */, 0x01 /* len */, 0x55 ) // 2109000F000155 - 610900
}
static const Zigbee_Instruction zb_prog[] PROGMEM = {
ZI_LABEL(0)
ZI_NOOP()
ZI_ON_ERROR_GOTO(ZIGBEE_LABEL_ABORT)
ZI_ON_TIMEOUT_GOTO(ZIGBEE_LABEL_ABORT)
ZI_ON_RECV_UNEXPECTED(&ZNP_Recv_Default)
ZI_WAIT(15500) // wait for 15 seconds for Tasmota to stabilize
//ZI_MQTT_STATE(ZIGBEE_STATUS_BOOT, "Booting")
ZI_LOG(LOG_LEVEL_INFO, D_LOG_ZIGBEE "rebooting ZNP device")
ZI_CALL(&ZNP_Reset_Device, 0) // LOW = reset
ZI_WAIT(100) // wait for .1 second
ZI_CALL(&ZNP_Reset_Device, 1) // HIGH = release reset
ZI_WAIT_RECV_FUNC(5000, ZBR_RESET, &ZNP_Reboot) // timeout 5s
ZI_WAIT(100)
ZI_LOG(LOG_LEVEL_DEBUG, kCheckingDeviceConfiguration) // Log Debug: checking device configuration
ZI_SEND(ZBS_VERSION) // check ZNP software version
ZI_WAIT_RECV_FUNC(2000, ZBR_VERSION, &ZNP_ReceiveCheckVersion) // Check if version is valid
// Dispatching whether coordinator, router or end-device
ZI_CALL(&Z_SwitchDeviceType, 0) // goto ZIGBEE_LABEL_INIT_ROUTER, ZIGBEE_LABEL_INIT_DEVICE or continue if coordinator
// ======================================================================
// Start as Zigbee Coordinator
// ======================================================================
// Check the configuration as Coordinator
ZI_ON_ERROR_GOTO(ZIGBEE_LABEL_FACT_RESET_COORD)
ZI_SEND(ZBS_ZNPHC) // check value of ZNP Has Configured
ZI_WAIT_RECV(2000, ZBR_ZNPHC)
ZI_SEND(ZBS_LOGTYPE) // check the logical type
ZI_WAIT_RECV(1000, ZBS_LOGTYPE_COORD) // it should be coordinator
ZI_SEND(ZBS_PAN) // check PAN ID
ZI_WAIT_RECV(1000, ZBR_PAN)
ZI_SEND(ZBS_EXTPAN) // check EXT PAN ID
ZI_WAIT_RECV(1000, ZBR_EXTPAN)
ZI_SEND(ZBS_CHANN) // check CHANNEL
ZI_WAIT_RECV(1000, ZBR_CHANN)
ZI_SEND(ZBS_PFGKEN) // check PFGKEN
ZI_WAIT_RECV(1000, ZBR_PFGKEN)
ZI_LABEL(ZIGBEE_LABEL_START_COORD)
// Check if the MCU is running ZStack3, it so goto ZIGBEE_LABEL_ZB3_INIT, or continue
ZI_CALL(&Z_GotoZB3, ZIGBEE_LABEL_ZB3_INIT)
// ======================================================================
// Start procedure for ZStack 1.2
// ======================================================================
ZI_SEND(ZBS_PFGK) // check PFGK on ZB1.2
ZI_WAIT_RECV(1000, ZBR_PFGK)
// all is good, we can start
ZI_MQTT_STATE(ZIGBEE_STATUS_STARTING, kConfiguredCoord)
ZI_ON_ERROR_GOTO(ZIGBEE_LABEL_ABORT) // set any failure to ABORT
ZI_SEND(ZBS_STARTUPFROMAPP) // start coordinator
ZI_WAIT_RECV(10000, ZBR_STARTUPFROMAPP) // wait for sync ack of command
ZI_WAIT_UNTIL_FUNC(20000, AREQ_STARTUPFROMAPP, &ZNP_ReceiveStateChange) // wait for async message that coordinator started, max 20s
ZI_GOTO(ZIGBEE_LABEL_COORD_STARTED)
// ======================================================================
// Start procedure for ZStack 3
// ======================================================================
ZI_LABEL(ZIGBEE_LABEL_ZB3_INIT)
ZI_SEND(ZBS_PFGK3) // check PFGK on ZB3
ZI_WAIT_RECV(1000, ZBR_PFGK3)
ZI_MQTT_STATE(ZIGBEE_STATUS_STARTING, kConfiguredCoord)
ZI_ON_ERROR_GOTO(ZIGBEE_LABEL_ABORT) // set any failure to ABORT
// Set channel mask for primary and secondary, using BDB_SET_CHANNEL
ZI_SEND(ZBS_W_BDB_CHANN) // set channel for primary network
ZI_WAIT_RECV(2000, ZBR_W_BDB_CHANN_OK)
ZI_SEND(ZBS_W_BDB_CHANN2) // no channel for secondary network
ZI_WAIT_RECV(2000, ZBR_W_BDB_CHANN_OK)
// all is good, we can start
ZI_SEND(ZBS_BDB_START_COMMIS) // start coordinator
ZI_WAIT_RECV(10000, ZBR_BDB_START_COMMIS) // wait for sync ack of command
ZI_WAIT_UNTIL_FUNC(20000, AREQ_STARTUPFROMAPP, &ZNP_ReceiveStateChange) // wait for async message that coordinator started, max 20s
// ======================================================================
// Coordinator has started, to post-configuration
// ======================================================================
ZI_LABEL(ZIGBEE_LABEL_COORD_STARTED) // Coordinator has started
ZI_SEND(ZBS_GETDEVICEINFO) // GetDeviceInfo
ZI_WAIT_RECV_FUNC(2000, ZBR_GETDEVICEINFO, &ZNP_ReceiveDeviceInfo)
ZI_SEND(ZBS_ZDO_NODEDESCREQ) // Z_ZDO:nodeDescReq
ZI_WAIT_RECV(1000, ZBR_ZDO_NODEDESCREQ)
ZI_WAIT_UNTIL(5000, AREQ_ZDO_NODEDESCRSP)
ZI_SEND(ZBS_ZDO_ACTIVEEPREQ) // Z_ZDO:activeEpReq
ZI_WAIT_RECV(1000, ZBR_ZDO_ACTIVEEPREQ)
ZI_WAIT_UNTIL(1000, ZBR_ZDO_ACTIVEEPRSP_SUCESS)
ZI_SEND(ZBS_AF_REGISTER01) // Z_AF register for endpoint 01, profile 0x0104 Home Automation
ZI_WAIT_RECV(1000, ZBR_AF_REGISTER)
ZI_SEND(ZBS_AF_REGISTER0B) // Z_AF register for endpoint 0B, profile 0x0104 Home Automation
ZI_WAIT_RECV(1000, ZBR_AF_REGISTER)
ZI_SEND(ZBS_AF_REGISTERF2) // Z_AF register for endpoint F2, profile 0xa1e0 Green Power
ZI_WAIT_RECV(1000, ZBR_AF_REGISTER_NOERROR) // don't abort if endpoint F2 was not accepted
// Write again channels, see https://github.com/Koenkk/zigbee-herdsman/blob/37bea20ba04ee5d4938abc21a7569b43f831de32/src/adapter/z-stack/adapter/startZnp.ts#L244-L245
ZI_SEND(ZBS_W_CHANN) // write CHANNEL
ZI_WAIT_RECV(1000, ZBR_WNV_OK)
// redo Z_ZDO:activeEpReq to check that Ep are available
// This is not really necessary and will fail if F2 was not allowed
// ZI_SEND(ZBS_ZDO_ACTIVEEPREQ) // Z_ZDO:activeEpReq
// ZI_WAIT_RECV(1000, ZBR_ZDO_ACTIVEEPREQ)
// ZI_WAIT_UNTIL(1000, ZBR_ZDO_ACTIVEEPRSP_OK)
ZI_SEND(ZBS_PERMITJOINREQ_CLOSE) // Closing the Permit Join
ZI_WAIT_RECV(1000, ZBR_PERMITJOINREQ)
ZI_WAIT_UNTIL(1000, ZBR_PERMITJOIN_AREQ_RSP)
// ======================================================================
// Correctly configured and running, enable all Tasmota features
// ======================================================================
ZI_LABEL(ZIGBEE_LABEL_READY)
ZI_CALL(&Z_Prepare_Storage, 0)
ZI_CALL(&Z_Load_Devices, 0)
ZI_CALL(&Z_Load_Data, 0)
ZI_CALL(&Z_Set_Save_Data_Timer, 0)
ZI_CALL(&Z_ZbAutoload, 0)
ZI_MQTT_STATE(ZIGBEE_STATUS_OK, kStarted)
ZI_LOG(LOG_LEVEL_INFO, kZigbeeStarted)
ZI_CALL(&Z_State_Ready, 1) // Now accept incoming messages
ZI_CALL(&Z_Query_Bulbs, 0)
ZI_LABEL(ZIGBEE_LABEL_MAIN_LOOP)
ZI_WAIT_FOREVER()
ZI_GOTO(ZIGBEE_LABEL_READY)
// ======================================================================
// Wrong configuration, do a factory reset and push configuration
// ======================================================================
ZI_LABEL(ZIGBEE_LABEL_FACT_RESET_COORD) // reformat device
ZI_MQTT_STATE(ZIGBEE_STATUS_RESET_CONF, kResetting)
//ZI_LOG(LOG_LEVEL_INFO, D_LOG_ZIGBEE "zigbee bad configuration of device, doing a factory reset")
ZI_ON_ERROR_GOTO(ZIGBEE_LABEL_ABORT)
ZI_SEND(ZBS_FACTRES) // factory reset
ZI_WAIT_RECV(1000, ZBR_WNV_OK)
ZI_SEND(ZBS_RESET) // reset device
ZI_WAIT_RECV(5000, ZBR_RESET)
ZI_SEND(ZBS_W_PAN) // write PAN ID
ZI_WAIT_RECV(1000, ZBR_WNV_OK)
ZI_SEND(ZBS_W_EXTPAN) // write EXT PAN ID
ZI_WAIT_RECV(1000, ZBR_WNV_OK)
ZI_SEND(ZBS_W_CHANN) // write CHANNEL
ZI_WAIT_RECV(1000, ZBR_WNV_OK)
ZI_SEND(ZBS_W_LOGTYP_COORD) // write Logical Type = coordinator
ZI_WAIT_RECV(1000, ZBR_WNV_OK)
ZI_SEND(ZBS_W_PFGK) // write PRECFGKEY
ZI_WAIT_RECV(1000, ZBR_WNV_OK)
ZI_SEND(ZBS_W_PFGKEN) // write PRECFGKEY Enable
ZI_WAIT_RECV(1000, ZBR_WNV_OK)
ZI_SEND(ZBS_WNV_SECMODE) // write Security Mode
ZI_WAIT_RECV(1000, ZBR_WNV_OKE) // Tolerate error for ZNP 3.x
ZI_SEND(ZBS_W_ZDODCB) // write Z_ZDO Direct CB
ZI_WAIT_RECV(1000, ZBR_WNV_OK)
// Now mark the device as ready, writing 0x55 in memory slot 0x0F00
ZI_SEND(ZBS_WNV_INITZNPHC) // Init NV ZNP Has Configured
ZI_WAIT_RECV_FUNC(1000, ZBR_WNV_INIT_OK, &ZNP_CheckNVWrite)
ZI_SEND(ZBS_WNV_ZNPHC) // Write NV ZNP Has Configured
ZI_WAIT_RECV(1000, ZBR_WNV_OK)
//ZI_LOG(LOG_LEVEL_INFO, D_LOG_ZIGBEE "zigbee device reconfigured")
ZI_GOTO(ZIGBEE_LABEL_START_COORD)
// ======================================================================
// Start as Zigbee Router
// ======================================================================
ZI_LABEL(ZIGBEE_LABEL_INIT_ROUTER) // Init as a router
// Check the configuration as Router
ZI_ON_ERROR_GOTO(ZIGBEE_LABEL_FACT_RESET_ROUTER)
ZI_SEND(ZBS_ZNPHC) // check value of ZNP Has Configured
ZI_WAIT_RECV(2000, ZBR_ZNPHC)
ZI_SEND(ZBS_LOGTYPE) // check the logical type
ZI_WAIT_RECV(1000, ZBS_LOGTYPE_ROUTER) // it should be coordinator
// ZI_LABEL(ZIGBEE_LABEL_START_ROUTER) // Init as a router
ZI_MQTT_STATE(ZIGBEE_STATUS_STARTING, kConfiguredRouter)
ZI_LABEL(ZIGBEE_LABEL_START_ROUTER_DEVICE)
ZI_ON_ERROR_GOTO(ZIGBEE_LABEL_ABORT)
ZI_SEND(ZBS_AF_REGISTER_ALL) // Z_AF register for endpoint 01, profile 0x0104 Home Automation
ZI_WAIT_RECV(1000, ZBR_AF_REGISTER)
ZI_SEND(ZBS_STARTUPFROMAPP) // start router
ZI_WAIT_RECV(2000, ZBR_STARTUPFROMAPP) // wait for sync ack of command
ZI_WAIT_UNTIL_FUNC(0xFFFF, AREQ_STARTUPFROMAPP, &ZNP_ReceiveStateChange) // wait for async message that coordinator started
ZI_SEND(ZBS_GETDEVICEINFO) // GetDeviceInfo
ZI_WAIT_RECV_FUNC(2000, ZBR_GETDEVICEINFO, &ZNP_ReceiveDeviceInfo)
ZI_GOTO(ZIGBEE_LABEL_READY)
ZI_LABEL(ZIGBEE_LABEL_FACT_RESET_ROUTER) // Factory reset for router
ZI_MQTT_STATE(ZIGBEE_STATUS_RESET_CONF, kResetting)
ZI_ON_ERROR_GOTO(ZIGBEE_LABEL_ABORT)
ZI_SEND(ZBS_FACTRES) // factory reset
ZI_WAIT_RECV(1000, ZBR_WNV_OK)
ZI_SEND(ZBS_RESET) // reset device
ZI_WAIT_RECV(5000, ZBR_RESET)
ZI_SEND(ZBS_W_LOGTYP_ROUTER) // write Logical Type = router
ZI_WAIT_RECV(1000, ZBR_WNV_OK)
ZI_LABEL(ZIGBEE_LABEL_FACT_RESET_ROUTER_DEVICE_POST)
ZI_SEND(ZBS_W_ALL_PAN) // write universal PAN ID = 0xFFFF
ZI_WAIT_RECV(1000, ZBR_WNV_OK)
ZI_SEND(ZBS_W_ALL_CHANN) // write Allows all CHANNELS = 0x07FFF800, 11-26
ZI_WAIT_RECV(1000, ZBR_WNV_OK)
// Now mark the device as ready, writing 0x55 in memory slot 0x0F00
ZI_SEND(ZBS_WNV_INITZNPHC) // Init NV ZNP Has Configured
ZI_WAIT_RECV_FUNC(1000, ZBR_WNV_INIT_OK, &ZNP_CheckNVWrite)
ZI_SEND(ZBS_WNV_ZNPHC) // Write NV ZNP Has Configured
ZI_WAIT_RECV(1000, ZBR_WNV_OK)
ZI_GOTO(ZIGBEE_LABEL_START_ROUTER_DEVICE)
// ======================================================================
// Start as Zigbee Device
// ======================================================================
ZI_LABEL(ZIGBEE_LABEL_INIT_DEVICE) // Init as a router
// Check the configuration as Router
ZI_ON_ERROR_GOTO(ZIGBEE_LABEL_FACT_RESET_DEVICE)
ZI_SEND(ZBS_ZNPHC) // check value of ZNP Has Configured
ZI_WAIT_RECV(2000, ZBR_ZNPHC)
ZI_SEND(ZBS_LOGTYPE) // check the logical type
ZI_WAIT_RECV(1000, ZBS_LOGTYPE_DEVICE) // it should be coordinator
ZI_MQTT_STATE(ZIGBEE_STATUS_STARTING, kConfiguredDevice)
ZI_GOTO(ZIGBEE_LABEL_START_ROUTER_DEVICE)
ZI_LABEL(ZIGBEE_LABEL_FACT_RESET_DEVICE) // Factory reset for router
ZI_MQTT_STATE(ZIGBEE_STATUS_RESET_CONF, kResetting)
ZI_ON_ERROR_GOTO(ZIGBEE_LABEL_ABORT)
ZI_SEND(ZBS_FACTRES) // factory reset
ZI_WAIT_RECV(1000, ZBR_WNV_OK)
ZI_SEND(ZBS_RESET) // reset device
ZI_WAIT_RECV(5000, ZBR_RESET)
ZI_SEND(ZBS_W_LOGTYP_DEVICE) // write Logical Type = router
ZI_WAIT_RECV(1000, ZBR_WNV_OK)
ZI_GOTO(ZIGBEE_LABEL_FACT_RESET_ROUTER_DEVICE_POST)
// Error: version of Z-Stack is not supported
ZI_LABEL(ZIGBEE_LABEL_UNSUPPORTED_VERSION)
ZI_MQTT_STATE(ZIGBEE_STATUS_UNSUPPORTED_VERSION, kZNP123)
ZI_GOTO(ZIGBEE_LABEL_ABORT)
// Abort state machine, general error
ZI_LABEL(ZIGBEE_LABEL_ABORT) // Label 99: abort
ZI_MQTT_STATE(ZIGBEE_STATUS_ABORT, kAbort)
ZI_LOG(LOG_LEVEL_ERROR, kZigbeeAbort)
ZI_STOP(ZIGBEE_LABEL_ABORT)
};
#endif // USE_ZIGBEE_ZNP
#ifdef USE_ZIGBEE_EZSP
// patterns for EZSP
// wait for RSTACK, meaning the device booted
ZBM(ZBR_RSTACK, Z_B0(EZSP_rstAck), Z_B1(EZSP_rstAck)) // FEFF - internal code for RSTACK
// call version() and ask for EZSP v8
ZBM(ZBS_VERSION, EZSP_version, 0x00, 0x08) // 000008
ZBM(ZBR_VERSION, EZSP_version, 0x00, 0x08, 0x02) // 00000802 - expect v8, proto v2
// general configuration
// inspired from bellows: https://github.com/zigpy/bellows/blob/dev/bellows/config/ezsp.py
ZBM(ZBS_SET_ADDR_TABLE, EZSP_setConfigurationValue, 0x00 /*high*/, EZSP_CONFIG_KEY_TABLE_SIZE, 0x02, 0x00) // 53001E0400
ZBM(ZBS_SET_MCAST_TABLE, EZSP_setConfigurationValue, 0x00 /*high*/, EZSP_CONFIG_MULTICAST_TABLE_SIZE, 0x10, 0x00) // 5300061000
ZBM(ZBS_SET_STK_PROF, EZSP_setConfigurationValue, 0x00 /*high*/, EZSP_CONFIG_STACK_PROFILE, 0x02, 0x00) // 53000C0200
ZBM(ZBS_SET_SEC_LEVEL, EZSP_setConfigurationValue, 0x00 /*high*/, EZSP_CONFIG_SECURITY_LEVEL, 0x05, 0x00) // 53000D0500
#ifdef USE_ZIGBEE_FORCE_NO_CHILDREN
ZBM(ZBS_SET_MAX_DEVICES, EZSP_setConfigurationValue, 0x00 /*high*/, EZSP_CONFIG_MAX_END_DEVICE_CHILDREN, 0x00, 0x00) // 5300112000
#endif
ZBM(ZBS_SET_INDIRECT_TMO, EZSP_setConfigurationValue, 0x00 /*high*/, EZSP_CONFIG_INDIRECT_TRANSMISSION_TIMEOUT, 0x00, 0x1E) // 530012001E
ZBM(ZBS_SET_TC_CACHE, EZSP_setConfigurationValue, 0x00 /*high*/, EZSP_CONFIG_TRUST_CENTER_ADDRESS_CACHE_SIZE, 0x02, 0x00) // 5300190200
ZBM(ZBS_SET_ROUTE_TBL, EZSP_setConfigurationValue, 0x00 /*high*/, EZSP_CONFIG_SOURCE_ROUTE_TABLE_SIZE, 0x10, 0x00) // 53001A1000
ZBM(ZBS_SET_KEY_TBL, EZSP_setConfigurationValue, 0x00 /*high*/, EZSP_CONFIG_KEY_TABLE_SIZE, 0x04, 0x00) // 53001E0400
ZBM(ZBS_SET_PANID_CNFLCT, EZSP_setConfigurationValue, 0x00 /*high*/, EZSP_CONFIG_PAN_ID_CONFLICT_REPORT_THRESHOLD, 0x02, 0x00)// 5300220200
ZBM(ZBS_SET_ZDO_REQ, EZSP_setConfigurationValue, 0x00 /*high*/, EZSP_CONFIG_APPLICATION_ZDO_FLAGS, EMBER_APP_RECEIVES_SUPPORTED_ZDO_REQUESTS | EMBER_APP_HANDLES_UNSUPPORTED_ZDO_REQUESTS, 0x00) // 53002A0300
ZBM(ZBS_SET_NETWORKS, EZSP_setConfigurationValue, 0x00 /*high*/, EZSP_CONFIG_SUPPORTED_NETWORKS, 0x01, 0x00) // 53002D0100
ZBM(ZBS_SET_PACKET_BUF, EZSP_setConfigurationValue, 0x00 /*high*/, EZSP_CONFIG_PACKET_BUFFER_COUNT, 0xFF, 0x00) // 530001FF00
ZBM(ZBR_SET_OK, EZSP_setConfigurationValue, 0x00 /*high*/, 0x00 /*ok*/) // 530000
// There is a bug in v6.7 where the response if 000000 instead of 530000
// If we detect the version to be v6.7, the first byte is changed to 00
ZBR(ZBR_SET_OK2, EZSP_setConfigurationValue, 0x00 /*high*/, 0x00 /*ok*/)
// Read some configuration values
// ZBM(ZBS_GET_APS_UNI, EZSP_getConfigurationValue, 0x00 /*high*/, EZSP_CONFIG_APS_UNICAST_MESSAGE_COUNT) // 520003
// ZBM(ZBR_GET_OK, EZSP_getConfigurationValue, 0x00 /*high*/, 0x00 /*ok*/) // 5200 - followed by the value
// Add Endpoints
ZBM(ZBS_ADD_ENDPOINT1, EZSP_addEndpoint, 0x00 /*high*/, 0x01 /*ep*/, Z_B0(Z_PROF_HA), Z_B1(Z_PROF_HA),
0x05, 0x00 /* AppDeviceId */, 0x00 /* AppDevVer */,
0x0F /* inputClusterCount */, // actually all clusters will be received
0X0F /* outputClusterCount */, // 02000104010500000F0F0000040005000600070008000A00020100030004020403040504060400050000040005000600070008000A0002010003000402040304050406040005
0x00,0x00, 0x04,0x00, 0x05,0x00, 0x06,0x00, // 0x0000, 0x0004, 0x0005, 0x0006
0x07,0x00, 0x08,0x00, 0x0A,0x00, 0x02,0x01, // 0x0007, 0x0008, 0x000A, 0X0102
0x00,0x03, 0x00,0x04, 0x02,0x04, 0x03,0x04, // 0x0300, 0x0400, 0x0402, 0x0403
0x05,0x04, 0x06,0x04, 0x00,0x05, // 0x0405, 0x0406, 0x0500
0x00,0x00, 0x04,0x00, 0x05,0x00, 0x06,0x00, // 0x0000, 0x0004, 0x0005, 0x0006
0x07,0x00, 0x08,0x00, 0x0A,0x00, 0x02,0x01, // 0x0007, 0x0008, 0x000A, 0X0102
0x00,0x03, 0x00,0x04, 0x02,0x04, 0x03,0x04, // 0x0300, 0x0400, 0x0402, 0x0403
0x05,0x04, 0x06,0x04, 0x00,0x05, // 0x0405, 0x0406, 0x0500
)
ZBM(ZBS_ADD_ENDPOINTB, EZSP_addEndpoint, 0x00 /*high*/, 0x0B /*ep*/, Z_B0(Z_PROF_HA), Z_B1(Z_PROF_HA),
0x05, 0x00 /* AppDeviceId */, 0x00 /* AppDevVer */,
0x00 /* inputClusterCount */, // actually all clusters will be received
0X00 /* outputClusterCount */, // 02000B04010500000000
// 0x00,0x00, 0x04,0x00, 0x05,0x00, 0x06,0x00, // 0x0000, 0x0004, 0x0005, 0x0006
// 0x07,0x00, 0x08,0x00, 0x0A,0x00, 0x02,0x01, // 0x0007, 0x0008, 0x000A, 0X0102
// 0x00,0x03, 0x00,0x04, 0x02,0x04, 0x03,0x04, // 0x0300, 0x0400, 0x0402, 0x0403
// 0x05,0x04, 0x06,0x04, // 0x0405, 0x0406, 0x0500
)
ZBM(ZBR_ADD_ENDPOINT, EZSP_addEndpoint, 0x00 /*high*/, 0x00 /*ok*/) // 020000
// set concentrator false
ZBM(ZBS_SET_CONCENTRATOR, EZSP_setConcentrator, 0x00 /*high*/, 0x00 /*false*/, 0xF9,0xFF /*HIGH_RAM_CONCENTRATOR*/,
0x58,0x02 /*minTime*/, 0x08,0x07 /*maxTime*/, 0x02 /*errThr*/, 0x05 /*failThr*/, 0x00 /*maxHops*/) // 100000F9FF58020807020500
ZBM(ZBR_SET_CONCENTRATOR, EZSP_setConcentrator, 0x00 /*high*/, 0x00 /*ok*/) // 100000
// setInitialSecurityState
#define EZ_SECURITY_MODE EMBER_TRUST_CENTER_GLOBAL_LINK_KEY | EMBER_HAVE_PRECONFIGURED_KEY | EMBER_HAVE_NETWORK_KEY | EMBER_NO_FRAME_COUNTER_RESET | EMBER_REQUIRE_ENCRYPTED_KEY
ZBR(ZBS_SET_SECURITY, EZSP_setInitialSecurityState, 0x00 /*high*/,
Z_B0(EZ_SECURITY_MODE), Z_B1(EZ_SECURITY_MODE),
// preConfiguredKey
0x5A, 0x69, 0x67, 0x42, 0x65, 0x65, 0x41, 0x6C, 0x6C, 0x69, 0x61, 0x6E, 0x63, 0x65, 0x30, 0x39, // well known key "ZigBeeAlliance09"
// networkKey
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* key_l */
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* key_h */ 0x00 /*sequence*/,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*trustcenter*/
)
ZBM(ZBR_SET_SECURITY, EZSP_setInitialSecurityState, 0x00 /*high*/, 0x00 /*status*/)
#define EMBER_JOINER_GLOBAL_LINK_KEY 0x0010
#define EMBER_NWK_LEAVE_REQUEST_NOT_ALLOWED 0x0100
#define EZ_EXT_SECURITY EMBER_JOINER_GLOBAL_LINK_KEY | EMBER_NWK_LEAVE_REQUEST_NOT_ALLOWED
ZBM(ZBS_SET_VALUE_EXTERNAL, EZSP_setValue, 0x00,/*high*/ EZSP_VALUE_EXTENDED_SECURITY_BITMASK, 2, Z_B0(EZ_EXT_SECURITY), Z_B1(EZ_EXT_SECURITY))
ZBM(ZBR_SET_VALUE_EXTERNAL, EZSP_setValue, 0x00,/*high*/ 0x00/*status*/)
// setIndividual policies
ZBM(ZBS_SET_POLICY_00, EZSP_setPolicy, 0x00 /*high*/, EZSP_TRUST_CENTER_POLICY,
EZSP_DECISION_ALLOW_JOINS | EZSP_DECISION_ALLOW_UNSECURED_REJOINS) // 55000003
ZBM(ZBS_SET_POLICY_02, EZSP_setPolicy, 0x00 /*high*/, EZSP_UNICAST_REPLIES_POLICY,
EZSP_HOST_WILL_NOT_SUPPLY_REPLY) // 55000220
ZBM(ZBS_SET_POLICY_03, EZSP_setPolicy, 0x00 /*high*/, EZSP_POLL_HANDLER_POLICY,
EZSP_POLL_HANDLER_IGNORE) // 55000330
ZBM(ZBS_SET_POLICY_04, EZSP_setPolicy, 0x00 /*high*/, EZSP_MESSAGE_CONTENTS_IN_CALLBACK_POLICY,
EZSP_MESSAGE_TAG_ONLY_IN_CALLBACK) // 55000440
ZBM(ZBS_SET_POLICY_05, EZSP_setPolicy, 0x00 /*high*/, EZSP_TC_KEY_REQUEST_POLICY,
EZSP_ALLOW_TC_KEY_REQUESTS_AND_SEND_CURRENT_KEY) // 55000551
ZBM(ZBS_SET_POLICY_06, EZSP_setPolicy, 0x00 /*high*/, EZSP_APP_KEY_REQUEST_POLICY,
EZSP_DENY_APP_KEY_REQUESTS) // 55000660
ZBM(ZBR_SET_POLICY_XX, EZSP_setPolicy, 0x00 /*high*/, 0x00 /*status*/)
// networkInit - restart the network from previous settings
ZBM(ZBS_NETWORK_INIT, EZSP_networkInit, 0x00 /*high*/, 0x00, 0x00) // 17000000
ZBM(ZBR_NETWORK_INIT, EZSP_networkInit, 0x00 /*high*/, 0x00 /*status*/) // 170000
// formNetwork - i.e. start zigbee network as coordinator
ZBR(ZBS_FORM_NETWORK, EZSP_formNetwork, 0x00 /*high*/,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ext_pan_id */
0x00, 0x00, // pan_id
USE_ZIGBEE_TXRADIO_DBM /*radioTxPower*/,
USE_ZIGBEE_CHANNEL /*channel*/,
EMBER_USE_MAC_ASSOCIATION,
0xFF,0xFF, /*nwkManagerId, unused*/
0x00, /*nwkUpdateId, unused*/
0x00,0x00,0x00,0x00, /*NWK channel mask, unused*/
) // 1E00...
ZBM(ZBR_FORM_NETWORK, EZSP_formNetwork, 0x00 /*high*/, 0x00 /*status*/) // 1E0000
ZBM(ZBR_NETWORK_UP, EZSP_stackStatusHandler, 0x00 /*high*/, EMBER_NETWORK_UP) // 190090
// leaveNetwork
ZBR(ZBS_LEAVE_NETWORK, EZSP_leaveNetwork, 0x00 /*high*/) // 2000
ZBM(ZBR_LEAVE_NETWORK, EZSP_leaveNetwork, 0x00 /*high*/) // 2000, we don't care whether it succeeeded or the network was not up
// read configuration details
ZBM(ZBS_GET_NETW_PARM, EZSP_getNetworkParameters, 0x00 /*high*/) // 2800
ZBM(ZBR_GET_NETW_PARM, EZSP_getNetworkParameters, 0x00 /*high*/, 0x00 /*ok*/) // 2800
ZBR(ZBR_CHECK_NETW_PARM, EZSP_getNetworkParameters, 0x00 /*high*/,
0x00 /*status*/,
EMBER_COORDINATOR /*0x01*/,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* ext_pan_id */
0x00, 0x00, // pan_id
USE_ZIGBEE_TXRADIO_DBM /*radioTxPower*/,
USE_ZIGBEE_CHANNEL /*channel*/,
) // 2800...
ZBM(ZBS_GET_EUI64, EZSP_getEui64, 0x00 /*high*/) // 2600
ZBM(ZBR_GET_EUI64, EZSP_getEui64, 0x00 /*high*/) // 2600
ZBM(ZBS_GET_NODEID, EZSP_getNodeId, 0x00 /*high*/) // 2700
ZBM(ZBR_GET_NODEID, EZSP_getNodeId, 0x00 /*high*/) // 2700
// auto subscribe to group 0 in slot 0
ZBM(ZBS_SET_MCAST_ENTRY, EZSP_setMulticastTableEntry, 0x00 /*high*/,
0x00 /* slot */, 0x00,0x00 /* group */, 0x01 /* endpoint */, 0x00 /* network */) // 64000000000100
ZBM(ZBR_SET_MCAST_ENTRY, EZSP_setMulticastTableEntry, 0x00 /*high*/, 0x00 /* status */)
// check the network key
// getCurrentSecurityState
// TODO double check the security bitmask
ZBM(ZBS_GET_KEY_NWK, EZSP_getKey, 0x00 /*high*/, EMBER_CURRENT_NETWORK_KEY) // 6A0003
ZBM(ZBR_GET_KEY_NWK, EZSP_getKey, 0x00 /*high*/, 0x00 /*status*/) // 6A0000...
/*********************************************************************************************\
* Update the relevant commands with Settings
\*********************************************************************************************/
//
uint64_t ezsp_key_low, ezsp_key_high;
void EZ_UpdateConfig(uint8_t zb_channel, uint16_t zb_pan_id, uint64_t zb_ext_panid, uint64_t zb_precfgkey_l, uint64_t zb_precfgkey_h, int8_t zb_txradio_dbm) {
int8_t txradio = zb_txradio_dbm;
// restrict txradio to acceptable range, and use default otherwise
if (txradio < 0) { txradio = USE_ZIGBEE_TXRADIO_DBM; }
if (txradio > 20) { txradio = USE_ZIGBEE_TXRADIO_DBM; }
ezsp_key_low = zb_precfgkey_l;
ezsp_key_high = zb_precfgkey_h;
ZBW(ZBS_SET_SECURITY, EZSP_setInitialSecurityState, 0x00 /*high*/,
Z_B0(EZ_SECURITY_MODE), Z_B1(EZ_SECURITY_MODE),
// preConfiguredKey
0x5A, 0x69, 0x67, 0x42, 0x65, 0x65, 0x41, 0x6C, 0x6C, 0x69, 0x61, 0x6E, 0x63, 0x65, 0x30, 0x39, // well known key "ZigBeeAlliance09"
// networkKey
Z_B0(zb_precfgkey_l), Z_B1(zb_precfgkey_l), Z_B2(zb_precfgkey_l), Z_B3(zb_precfgkey_l),
Z_B4(zb_precfgkey_l), Z_B5(zb_precfgkey_l), Z_B6(zb_precfgkey_l), Z_B7(zb_precfgkey_l),
Z_B0(zb_precfgkey_h), Z_B1(zb_precfgkey_h), Z_B2(zb_precfgkey_h), Z_B3(zb_precfgkey_h),
Z_B4(zb_precfgkey_h), Z_B5(zb_precfgkey_h), Z_B6(zb_precfgkey_h), Z_B7(zb_precfgkey_h),
0x00 /*sequence*/,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /*trustcenter*/
)
ZBW(ZBS_FORM_NETWORK, EZSP_formNetwork, 0x00 /*high*/,
Z_B0(zb_ext_panid), Z_B1(zb_ext_panid), Z_B2(zb_ext_panid), Z_B3(zb_ext_panid),
Z_B4(zb_ext_panid), Z_B5(zb_ext_panid), Z_B6(zb_ext_panid), Z_B7(zb_ext_panid),
Z_B0(zb_pan_id), Z_B1(zb_pan_id),
(uint8_t)txradio /*radioTxPower*/,
zb_channel /*channel*/,
EMBER_USE_MAC_ASSOCIATION,
0xFF,0xFF, /*nwkManagerId, unused*/
0x00, /*nwkUpdateId, unused*/
0x00,0x00,0x00,0x00, /*NWK channel mask, unused*/
) // 1E00...
ZBW(ZBR_CHECK_NETW_PARM, EZSP_getNetworkParameters, 0x00 /*high*/,
0x00 /*status*/,
EMBER_COORDINATOR /*0x01*/,
Z_B0(zb_ext_panid), Z_B1(zb_ext_panid), Z_B2(zb_ext_panid), Z_B3(zb_ext_panid),
Z_B4(zb_ext_panid), Z_B5(zb_ext_panid), Z_B6(zb_ext_panid), Z_B7(zb_ext_panid),
Z_B0(zb_pan_id), Z_B1(zb_pan_id),
(uint8_t)txradio /*radioTxPower*/,
zb_channel /*channel*/,
) // 2800...
}
static const Zigbee_Instruction zb_prog[] PROGMEM = {
ZI_LABEL(0)
ZI_CALL(&EZ_Reset_Device, 0) // immediately drive reset low
ZI_LOG(LOG_LEVEL_INFO, kResettingDevice) // Log Debug: resetting EZSP device
// ZI_CALL(EZ_Set_ResetConfig, 0) // for the firt pass, don't do a reset_config
ZI_LABEL(ZIGBEE_LABEL_RESTART)
ZI_ON_ERROR_GOTO(ZIGBEE_LABEL_ABORT)
ZI_ON_TIMEOUT_GOTO(ZIGBEE_LABEL_ABORT)
ZI_ON_RECV_UNEXPECTED(&EZ_Recv_Default)
ZI_WAIT(15500) // wait for 15 seconds for Tasmota to stabilize
// Hardware reset
ZI_LOG(LOG_LEVEL_INFO, kResettingDevice) // Log Debug: resetting EZSP device
ZI_CALL(&EZ_Reset_Device, 0) // LOW = reset
ZI_WAIT(100) // wait for .1 second
ZI_CALL(&EZ_Reset_Device, 1) // HIGH = release reset
// wait for device to start
ZI_WAIT_UNTIL(5000, ZBR_RSTACK) // wait for RSTACK message
// Init device and probe version
ZI_SEND(ZBS_VERSION) ZI_WAIT_RECV_FUNC(5000, ZBR_VERSION, &EZ_ReceiveCheckVersion) // check EXT PAN ID
// configure EFR32
ZI_MQTT_STATE(ZIGBEE_STATUS_STARTING, kConfiguredCoord)
ZI_SEND(ZBS_SET_ADDR_TABLE) ZI_WAIT_RECV(2500, ZBR_SET_OK) // Address table size
ZI_SEND(ZBS_SET_MCAST_TABLE) ZI_WAIT_RECV(2500, ZBR_SET_OK)
ZI_SEND(ZBS_SET_STK_PROF) ZI_WAIT_RECV(2500, ZBR_SET_OK)
ZI_SEND(ZBS_SET_SEC_LEVEL) ZI_WAIT_RECV(2500, ZBR_SET_OK)
#ifdef USE_ZIGBEE_FORCE_NO_CHILDREN
ZI_SEND(ZBS_SET_MAX_DEVICES) ZI_WAIT_RECV(2500, ZBR_SET_OK)
#endif
ZI_SEND(ZBS_SET_INDIRECT_TMO) ZI_WAIT_RECV(2500, ZBR_SET_OK)
ZI_SEND(ZBS_SET_TC_CACHE) ZI_WAIT_RECV(2500, ZBR_SET_OK)
ZI_SEND(ZBS_SET_ROUTE_TBL) ZI_WAIT_RECV(2500, ZBR_SET_OK)
ZI_SEND(ZBS_SET_KEY_TBL) ZI_WAIT_RECV(2500, ZBR_SET_OK)
ZI_SEND(ZBS_SET_PANID_CNFLCT) ZI_WAIT_RECV(2500, ZBR_SET_OK)
ZI_SEND(ZBS_SET_ZDO_REQ) ZI_WAIT_RECV(2500, ZBR_SET_OK)
ZI_SEND(ZBS_SET_NETWORKS) ZI_WAIT_RECV(2500, ZBR_SET_OK)
ZI_SEND(ZBS_SET_PACKET_BUF) ZI_WAIT_RECV(2500, ZBR_SET_OK2)
// read configuration
// TODO - not sure it's useful
//ZI_SEND(ZBS_GET_APS_UNI) ZI_WAIT_RECV_FUNC(2500, ZBR_GET_OK, &EZ_ReadAPSUnicastMessage)
// add endpoint 0x01 and 0x0B
ZI_SEND(ZBS_ADD_ENDPOINT1) ZI_WAIT_RECV(2500, ZBR_ADD_ENDPOINT)
ZI_SEND(ZBS_ADD_ENDPOINTB) ZI_WAIT_RECV(2500, ZBR_ADD_ENDPOINT)
// set Concentrator
ZI_SEND(ZBS_SET_CONCENTRATOR) ZI_WAIT_RECV(2500, ZBR_SET_CONCENTRATOR)
// setInitialSecurityState
ZI_SEND(ZBS_SET_POLICY_00) ZI_WAIT_RECV(2500, ZBR_SET_POLICY_XX)
ZI_SEND(ZBS_SET_POLICY_02) ZI_WAIT_RECV(2500, ZBR_SET_POLICY_XX)
ZI_SEND(ZBS_SET_POLICY_03) ZI_WAIT_RECV(2500, ZBR_SET_POLICY_XX)
// ZI_SEND(ZBS_SET_POLICY_04) ZI_WAIT_RECV(2500, ZBR_SET_POLICY_XX)
ZI_SEND(ZBS_SET_POLICY_05) ZI_WAIT_RECV(2500, ZBR_SET_POLICY_XX)
ZI_SEND(ZBS_SET_POLICY_06) ZI_WAIT_RECV(2500, ZBR_SET_POLICY_XX)
// Decide whether we try 'networkInit()' to restore configuration, or create a new network
ZI_CALL(&EZ_GotoIfResetConfig, ZIGBEE_LABEL_CONFIGURE_EZSP) // goto ZIGBEE_LABEL_CONFIGURE_EZSP if reset_config is set
// ZI_GOTO(ZIGBEE_LABEL_CONFIGURE_EZSP)
// Try networkInit to restore settings, and check if network comes up
ZI_ON_TIMEOUT_GOTO(ZIGBEE_LABEL_BAD_CONFIG) //
ZI_ON_ERROR_GOTO(ZIGBEE_LABEL_BAD_CONFIG)
ZI_SEND(ZBS_NETWORK_INIT) ZI_WAIT_RECV(2500, ZBR_NETWORK_INIT)
ZI_WAIT_RECV(1500, ZBR_NETWORK_UP) // wait for network to start
// check if configuration is ok
ZI_SEND(ZBS_GET_KEY_NWK) ZI_WAIT_RECV_FUNC(2500, ZBR_GET_KEY_NWK, &EZ_CheckKeyNWK)
ZI_SEND(ZBS_GET_EUI64) ZI_WAIT_RECV_FUNC(2500, ZBR_GET_EUI64, &EZ_GetEUI64)
ZI_SEND(ZBS_GET_NETW_PARM) ZI_WAIT_RECV_FUNC(2500, ZBR_CHECK_NETW_PARM, &EZ_NetworkParameters)
// all ok, proceed to next step
ZI_GOTO(ZIGBEE_LABEL_NETWORK_CONFIGURED)
ZI_LABEL(ZIGBEE_LABEL_BAD_CONFIG)
ZI_MQTT_STATE(ZIGBEE_STATUS_RESET_CONF, kResetting)
ZI_CALL(EZ_Set_ResetConfig, 1) // change mode to reset_config
ZI_GOTO(ZIGBEE_LABEL_RESTART) // restart state_machine
ZI_LABEL(ZIGBEE_LABEL_CONFIGURE_EZSP)
// Set back normal error handlers
ZI_LOG(LOG_LEVEL_INFO, kReconfiguringDevice) // Log Debug: reconfiguring EZSP device
ZI_ON_TIMEOUT_GOTO(ZIGBEE_LABEL_ABORT)
ZI_ON_ERROR_GOTO(ZIGBEE_LABEL_ABORT)
// set encryption keys
ZI_SEND(ZBS_SET_SECURITY) ZI_WAIT_RECV(2500, ZBR_SET_SECURITY)
ZI_SEND(ZBS_SET_VALUE_EXTERNAL) ZI_WAIT_RECV(2500, ZBR_SET_VALUE_EXTERNAL)
// formNetwork
ZI_SEND(ZBS_FORM_NETWORK) ZI_WAIT_RECV(2500, ZBR_FORM_NETWORK)
ZI_WAIT_RECV(5000, ZBR_NETWORK_UP) // wait for network to start
ZI_LABEL(ZIGBEE_LABEL_NETWORK_CONFIGURED)
// Set back normal error handlers
ZI_ON_TIMEOUT_GOTO(ZIGBEE_LABEL_ABORT)
ZI_ON_ERROR_GOTO(ZIGBEE_LABEL_ABORT)
// Query device information
ZI_SEND(ZBS_GET_EUI64) ZI_WAIT_RECV_FUNC(2500, ZBR_GET_EUI64, &EZ_GetEUI64)
ZI_SEND(ZBS_GET_NODEID) ZI_WAIT_RECV_FUNC(2500, ZBR_GET_NODEID, &EZ_GetNodeId)
// auto-register multicast group 0x0000
ZI_LOG(LOG_LEVEL_INFO, kZigbeeGroup0)
ZI_SEND(ZBS_SET_MCAST_ENTRY) ZI_WAIT_RECV(2500, ZBR_SET_MCAST_ENTRY)
// ZI_LABEL(ZIGBEE_LABEL_READY)
ZI_CALL(&Z_Prepare_Storage, 0)
ZI_CALL(&Z_Load_Devices, 0)
ZI_CALL(&Z_Load_Data, 0)
ZI_CALL(&Z_Set_Save_Data_Timer, 0)
ZI_CALL(&Z_ZbAutoload, 0)
ZI_MQTT_STATE(ZIGBEE_STATUS_OK, kStarted)
ZI_LOG(LOG_LEVEL_INFO, kZigbeeStarted)
ZI_CALL(&Z_State_Ready, 1) // Now accept incoming messages
ZI_CALL(&Z_Query_Bulbs, 0)
ZI_LABEL(ZIGBEE_LABEL_MAIN_LOOP)
ZI_WAIT_FOREVER()
ZI_GOTO(ZIGBEE_LABEL_MAIN_LOOP)
// Error: version of Z-Stack is not supported
ZI_LABEL(ZIGBEE_LABEL_UNSUPPORTED_VERSION)
ZI_MQTT_STATE(ZIGBEE_STATUS_UNSUPPORTED_VERSION, kEZ8)
ZI_GOTO(ZIGBEE_LABEL_ABORT)
// Abort state machine, general error
ZI_LABEL(ZIGBEE_LABEL_ABORT) // Label 99: abort
ZI_MQTT_STATE(ZIGBEE_STATUS_ABORT, kAbort)
ZI_LOG(LOG_LEVEL_ERROR, kZigbeeAbort)
ZI_STOP(ZIGBEE_LABEL_ABORT)
};
#endif // USE_ZIGBEE_EZSP
uint8_t ZigbeeGetInstructionSize(uint8_t instr) { // in Zigbee_Instruction lines (words)
if (instr >= ZGB_INSTR_12_BYTES) {
return 3;
} else if (instr >= ZGB_INSTR_8_BYTES) {
return 2;
} else {
return 1;
}
}
void ZigbeeGotoLabel(uint8_t label) {
// look for the label scanning entire code
uint8_t cur_instr = 0;
uint8_t cur_d8 = 0;
uint8_t cur_instr_len = 1; // size of current instruction in words
for (uint32_t i = 0; i < nitems(zb_prog); i += cur_instr_len) {
const Zigbee_Instruction *cur_instr_line = &zb_prog[i];
cur_instr = pgm_read_byte(&cur_instr_line->i.i);
cur_d8 = pgm_read_byte(&cur_instr_line->i.d8);
//AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("ZGB GOTO: pc %d instr %d"), i, cur_instr);
if (ZGB_INSTR_LABEL == cur_instr) {
//AddLog(LOG_LEVEL_DEBUG_MORE, PSTR(D_LOG_ZIGBEE "found label %d at pc %d"), cur_d8, i);
if (label == cur_d8) {
// label found, goto to this pc
zigbee.pc = i;
zigbee.state_machine = true;
zigbee.state_waiting = false;
return;
}
}
// get instruction length
cur_instr_len = ZigbeeGetInstructionSize(cur_instr);
}
// no label found, abort
AddLog(LOG_LEVEL_ERROR, PSTR(D_LOG_ZIGBEE "Goto label not found, label=%d pc=%d"), label, zigbee.pc);
if (ZIGBEE_LABEL_ABORT != label) {
// if not already looking for ZIGBEE_LABEL_ABORT, goto ZIGBEE_LABEL_ABORT
ZigbeeGotoLabel(ZIGBEE_LABEL_ABORT);
} else {
AddLog(LOG_LEVEL_ERROR, PSTR(D_LOG_ZIGBEE "Label Abort (%d) not present, aborting Zigbee"), ZIGBEE_LABEL_ABORT);
zigbee.state_machine = false;
zigbee.active = false;
}
}
void ZigbeeStateMachine_Run(void) {
uint8_t cur_instr = 0;
uint8_t cur_d8 = 0;
uint16_t cur_d16 = 0;
const void* cur_ptr1 = nullptr;
const void* cur_ptr2 = nullptr;
uint32_t now = millis();
if (zigbee.state_waiting) { // state machine is waiting for external event or timeout
// checking if timeout expired
if ((zigbee.next_timeout) && (now > zigbee.next_timeout)) { // if next_timeout == 0 then wait forever
if (!zigbee.state_no_timeout) {
AddLog(LOG_LEVEL_INFO, PSTR(D_LOG_ZIGBEE "timeout, goto label %d"), zigbee.on_timeout_goto);
ZigbeeGotoLabel(zigbee.on_timeout_goto);
} else {
zigbee.state_waiting = false; // simply stop waiting
}
}
}
while ((zigbee.state_machine) && (!zigbee.state_waiting)) {
// reinit receive filters and functions (they only work for a single instruction)
zigbee.recv_filter = nullptr;
zigbee.recv_func = nullptr;
zigbee.recv_until = false;
zigbee.state_no_timeout = false; // reset the no_timeout for next instruction
if (zigbee.pc > nitems(zb_prog)) {
AddLog(LOG_LEVEL_ERROR, PSTR(D_LOG_ZIGBEE "Invalid pc: %d, aborting"), zigbee.pc);
zigbee.pc = -1;
}
if (zigbee.pc < 0) {
zigbee.state_machine = false;
return;
}
// load current instruction details
const Zigbee_Instruction *cur_instr_line = &zb_prog[zigbee.pc];
cur_instr = pgm_read_byte(&cur_instr_line->i.i);
cur_d8 = pgm_read_byte(&cur_instr_line->i.d8);
cur_d16 = pgm_read_word(&cur_instr_line->i.d16);
if (cur_instr >= ZGB_INSTR_8_BYTES) {
cur_instr_line++;
cur_ptr1 = cur_instr_line->p;
}
if (cur_instr >= ZGB_INSTR_12_BYTES) {
cur_instr_line++;
cur_ptr2 = cur_instr_line->p;
}
zigbee.pc += ZigbeeGetInstructionSize(cur_instr); // move pc to next instruction, before any goto
switch (cur_instr) {
case ZGB_INSTR_NOOP:
case ZGB_INSTR_LABEL: // do nothing
break;
case ZGB_INSTR_GOTO:
ZigbeeGotoLabel(cur_d8);
break;
case ZGB_INSTR_ON_ERROR_GOTO:
zigbee.on_error_goto = cur_d8;
break;
case ZGB_INSTR_ON_TIMEOUT_GOTO:
zigbee.on_timeout_goto = cur_d8;
break;
case ZGB_INSTR_WAIT:
zigbee.next_timeout = now + cur_d16;
zigbee.state_waiting = true;
zigbee.state_no_timeout = true; // do not generate a timeout error when waiting is done
break;
case ZGB_INSTR_WAIT_FOREVER:
zigbee.next_timeout = 0;
zigbee.state_waiting = true;
break;
case ZGB_INSTR_STOP:
zigbee.state_machine = false;
if (cur_d8) {
AddLog(LOG_LEVEL_ERROR, PSTR(D_LOG_ZIGBEE "Stopping (%d)"), cur_d8);
}
break;
case ZGB_INSTR_CALL:
if (cur_ptr1) {
uint32_t res;
res = (*((ZB_Func)cur_ptr1))(cur_d8);
// res = (*((ZB_Func)cur_ptr1))(cur_d8, cur_d16);
if (res > 0) {
ZigbeeGotoLabel(res);
continue; // avoid incrementing PC after goto
} else if (res == 0) {
// do nothing
} else if (res == -1) {
// do nothing
} else {
ZigbeeGotoLabel(zigbee.on_error_goto);
continue;
}
}
break;
case ZGB_INSTR_LOG:
AddLog(cur_d8, (char*) cur_ptr1);
break;
case ZGB_INSTR_MQTT_STATE:
{
const char *f_msg = (const char*) cur_ptr1;
Response_P(PSTR("{\"" D_JSON_ZIGBEE_STATE "\":{\"Status\":%d,\"Message\":\"%s\"}}"),
cur_d8, f_msg);
MqttPublishPrefixTopicRulesProcess_P(RESULT_OR_TELE, PSTR(D_JSON_ZIGBEE_STATE));
}
break;
case ZGB_INSTR_SEND:
#ifdef USE_ZIGBEE_ZNP
ZigbeeZNPSend((uint8_t*) cur_ptr1, cur_d8 /* len */);
#endif // USE_ZIGBEE_ZNP
#ifdef USE_ZIGBEE_EZSP
ZigbeeEZSPSendCmd((uint8_t*) cur_ptr1, cur_d8 /* len */); // send cancel byte
#endif // USE_ZIGBEE_EZSP
break;
case ZGB_INSTR_WAIT_UNTIL:
zigbee.recv_until = true; // and reuse ZGB_INSTR_WAIT_RECV
case ZGB_INSTR_WAIT_RECV:
zigbee.recv_filter = (uint8_t *) cur_ptr1;
zigbee.recv_filter_len = cur_d8; // len
if (0xFFFF == cur_d16) {
zigbee.next_timeout = 0; // forever
} else {
zigbee.next_timeout = now + cur_d16;
}
zigbee.state_waiting = true;
break;
case ZGB_ON_RECV_UNEXPECTED:
zigbee.recv_unexpected = (ZB_RecvMsgFunc) cur_ptr1;
break;
case ZGB_INSTR_WAIT_UNTIL_CALL:
zigbee.recv_until = true; // and reuse ZGB_INSTR_WAIT_RECV
case ZGB_INSTR_WAIT_RECV_CALL:
zigbee.recv_filter = (uint8_t *) cur_ptr1;
zigbee.recv_filter_len = cur_d8; // len
zigbee.recv_func = (ZB_RecvMsgFunc) cur_ptr2;
if (0xFFFF == cur_d16) {
zigbee.next_timeout = 0; // forever
} else {
zigbee.next_timeout = now + cur_d16;
}
zigbee.state_waiting = true;
break;
}
}
}
//
// Process a bytes buffer and call any callback that matches the received message
//
int32_t ZigbeeProcessInput(SBuffer &buf) {
if (!zigbee.state_machine) { return -1; } // if state machine is stopped, send 'ignore' message
// apply the receive filter, acts as 'startsWith()'
bool recv_filter_match = true;
bool recv_prefix_match = false; // do the first 2 bytes match the response
if ((zigbee.recv_filter) && (zigbee.recv_filter_len > 0)) {
if (zigbee.recv_filter_len >= 2) {
recv_prefix_match = false;
if ( (pgm_read_byte(&zigbee.recv_filter[0]) == buf.get8(0)) &&
(pgm_read_byte(&zigbee.recv_filter[1]) == buf.get8(1)) ) {
recv_prefix_match = true;
}
}
for (uint32_t i = 0; i < zigbee.recv_filter_len; i++) {
if (pgm_read_byte(&zigbee.recv_filter[i]) != buf.get8(i)) {
recv_filter_match = false;
break;
}
}
}
// if there is a recv_callback, call it now
int32_t res = -1; // default to ok
// res = 0 - proceed to next state
// res > 0 - proceed to the specified state
// res = -1 - silently ignore the message
// res <= -2 - move to error state
// pre-compute the suggested value
if ((zigbee.recv_filter) && (zigbee.recv_filter_len > 0)) {
if (!recv_prefix_match) {
res = -1; // ignore
} else { // recv_prefix_match
if (recv_filter_match) {
res = 0; // ok
} else {
if (zigbee.recv_until) {
res = -1; // ignore until full match
} else {
res = -2; // error, because message is expected but wrong value
}
}
}
} else { // we don't have any filter, ignore message by default
res = -1;
}
if (recv_prefix_match) {
if (zigbee.recv_func) {
res = (*zigbee.recv_func)(res, buf);
}
}
if (-1 == res) {
// if frame was ignored up to now
if (zigbee.recv_unexpected) {
res = (*zigbee.recv_unexpected)(res, buf);
}
}
// change state accordingly
if (0 == res) {
// if ok, continue execution
zigbee.state_waiting = false;
} else if (res > 0) {
ZigbeeGotoLabel(res); // if >0 then go to specified label
} else if (-1 == res) {
// -1 means ignore message
// just do nothing
} else {
// any other negative value means error
ZigbeeGotoLabel(zigbee.on_error_goto);
}
return 0; // Fix GCC 10.1 warning
}
//
// Condiditional GOTO depending on ZB3 or not
// Take the branch if ZB3
int32_t Z_GotoZB3(uint8_t value) {
if (zigbee.zb3) {
return value; // take the branch
} else {
return 0; // continue
}
}
#endif // USE_ZIGBEE
Reference in New Issue View Git Blame Copy Permalink