mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Tasmota/tasmota/tasmota_xsns_sensor/xsns_81_seesaw_soil.ino

364 lines
13 KiB
C++
Raw Permalink Blame History

/*
xsns_81_seesaw_soil - I2C Capacitance & temperature sensor support for Tasmota
Copyright (C) 2021 Wayne Ross, Theo Arends, Peter Franck
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_I2C
#ifdef USE_SEESAW_SOIL
/*********************************************************************************************\
* SEESAW_SOIL - Capacitice Soil Moisture & Temperature Sensor
*
* I2C Address: 0x36, 0x37, 0x38, 0x39
*
* This version of the driver replaces all delay loops by a state machine. So the number
* of instruction cycles consumed has been reduced dramatically. The sensors are reset,
* detected, commanded and read all at once. So the reading times won't increase with the
* number of sensors attached. The detection of sensors does not happen in FUNC_INIT any
* more. All i2c handling happens in the 50ms state machine.
* The memory footprint has suffered a little bit from this redesign, naturally.
*
* Memory footprint: 1444 bytes flash / 68 bytes RAM
*
* NOTE: #define SEESAW_SOIL_PUBLISH enables immediate MQTT on soil moisture change
* otherwise the moisture value will only be emitted every TelePeriod
* #define SEESAW_SOIL_RAW enables displaying analog capacitance input in the
* web page for calibration purposes
* #define SEESAW_SOIL_PERSISTENT_NAMING to get sensor names indexed by i2c address
\*********************************************************************************************/
#define XSNS_81 81
#define XI2C_56 56 // See I2CDEVICES.md
#include "Adafruit_seesaw.h" // we only use definitions, no code
#define SEESAW_SOIL_MAX_SENSORS 4
#define SEESAW_SOIL_START_ADDRESS 0x36
// I2C state machine
#define STATE_IDLE 0x00
#define STATE_RESET 0x01
#define STATE_INIT 0x02
#define STATE_DETECT 0x04
#define STATE_COMMAND_TEMP 0x08
#define STATE_READ_TEMP 0x10
#define STATE_COMMAND_MOIST 0x20
#define STATE_READ_MOIST 0x40
// I2C commands
#define COMMAND_RESET 0x01
#define COMMAND_ID 0x02
#define COMMAND_TEMP 0x04
#define COMMAND_MOIST 0x08
// I2C delays
#define DELAY_DETECT 1 // ms delay before reading ID
#define DELAY_TEMP 1 // ms delay between command and reading
#define DELAY_MOIST 5 // ms delay between command and reading
#define DELAY_RESET 500 // ms delay after slave reset
// Convert capacitance into a moisture.
// From observation, a free air reading is at 320, immersed in tap water, reading is 1014
// So let's make a scale that converts those (apparent) facts into a percentage
#define MAX_CAPACITANCE 1020.0f // subject to calibration
#define MIN_CAPACITANCE 320 // subject to calibration
#define CAP_TO_MOIST(c) ((max((int)(c),MIN_CAPACITANCE)-MIN_CAPACITANCE)/(MAX_CAPACITANCE-MIN_CAPACITANCE)*100)
struct SEESAW_SOIL {
const char name[8] = "SeeSoil"; // spaces not allowed for Homeassistant integration/mqtt topics
uint8_t count = 0; // global sensor count (0xFF = not initialized)
uint8_t state = STATE_IDLE; // current state
bool present = false; // driver active
} SeeSoil;
struct SEESAW_SOIL_SNS {
uint8_t address; // i2c address
float moisture;
float temperature;
#ifdef SEESAW_SOIL_RAW
uint16_t capacitance; // raw analog reading
#endif // SEESAW_SOIL_RAW
} SeeSoilSNS[SEESAW_SOIL_MAX_SENSORS];
/*********************************************************************************************\
* i2c routines
\*********************************************************************************************/
void seeSoilInit(void) {
for (int i = 0; i < SEESAW_SOIL_MAX_SENSORS; i++) {
int addr = SEESAW_SOIL_START_ADDRESS + i;
if ( ! I2cSetDevice(addr) ) { continue; }
seeSoilCommand(COMMAND_RESET);
}
SeeSoil.state = STATE_RESET;
SeeSoil.present = true;
}
void seeSoilEvery50ms(void){ // i2c state machine
static uint32_t state_time;
uint32_t time_diff = millis() - state_time;
switch (SeeSoil.state) {
case STATE_RESET: // reset was just issued
SeeSoil.state = STATE_INIT;
break;
case STATE_INIT: // wait for sensors to settle
if (time_diff < DELAY_RESET) { return; }
seeSoilCommand(COMMAND_ID); // send hardware id commands
SeeSoil.state = STATE_DETECT;
break;
case STATE_DETECT: // detect sensors
if (time_diff < DELAY_DETECT) { return; }
seeSoilDetect();
SeeSoil.state=STATE_COMMAND_TEMP;
break;
case STATE_COMMAND_TEMP: // send temperature commands
seeSoilCommand(COMMAND_TEMP);
SeeSoil.state = STATE_READ_TEMP;
break;
case STATE_READ_TEMP:
if (time_diff < DELAY_TEMP) { return; }
seeSoilRead(COMMAND_TEMP); // read temperature values
SeeSoil.state = STATE_COMMAND_MOIST;
break;
case STATE_COMMAND_MOIST: // send moisture commands
seeSoilCommand(COMMAND_MOIST);
SeeSoil.state = STATE_READ_MOIST;
break;
case STATE_READ_MOIST:
if (time_diff < DELAY_MOIST) { return; }
seeSoilRead(COMMAND_MOIST); // read moisture values
SeeSoil.state = STATE_COMMAND_TEMP;
break;
}
state_time = millis();
}
void seeSoilDetect(void) { // detect sensors
uint8_t buf;
SeeSoil.count = 0;
SeeSoil.present = false;
for (int i = 0; i < SEESAW_SOIL_MAX_SENSORS; i++) {
uint32_t addr = SEESAW_SOIL_START_ADDRESS + i;
if ( ! I2cSetDevice(addr)) { continue; }
if (1 != Wire.requestFrom((uint8_t) addr, (uint8_t) 1)) { continue; }
buf = (uint8_t) Wire.read();
if (buf != SEESAW_HW_ID_CODE) { // check hardware id
#ifdef DEBUG_SEESAW_SOIL
AddLog(LOG_LEVEL_DEBUG, PSTR("SEE: HWID mismatch ADDR=%X, ID=%X"), addr, buf);
#endif // DEBUG_SEESAW_SOIL
continue;
}
SeeSoilSNS[SeeSoil.count].address = addr;
SeeSoilSNS[SeeSoil.count].temperature = NAN;
SeeSoilSNS[SeeSoil.count].moisture = NAN;
#ifdef SEESAW_SOIL_RAW
SeeSoilSNS[SeeSoil.count].capacitance = 0; // raw analog reading
#endif // SEESAW_SOIL_RAW
I2cSetActiveFound(SeeSoilSNS[SeeSoil.count].address, SeeSoil.name);
SeeSoil.count++;
SeeSoil.present = true;
#ifdef DEBUG_SEESAW_SOIL
AddLog(LOG_LEVEL_DEBUG, PSTR("SEE: FOUND sensor %u at %02X"), i, addr);
#endif // DEBUG_SEESAW_SOIL
}
}
void seeSoilCommand(uint32_t command) { // issue commands to sensors
uint8_t regLow;
uint8_t regHigh = SEESAW_STATUS_BASE;
uint32_t count = SeeSoil.count;
switch (command) {
case COMMAND_RESET:
count = SEESAW_SOIL_MAX_SENSORS;
regLow = SEESAW_STATUS_SWRST;
break;
case COMMAND_ID:
count = SEESAW_SOIL_MAX_SENSORS;
regLow = SEESAW_STATUS_HW_ID;
break;
case COMMAND_TEMP:
regLow = SEESAW_STATUS_TEMP;
break;
case COMMAND_MOIST:
regHigh = SEESAW_TOUCH_BASE;
regLow = SEESAW_TOUCH_CHANNEL_OFFSET;
break;
default:
#ifdef DEBUG_SEESAW_SOIL
AddLog(LOG_LEVEL_DEBUG, PSTR("SEE: ILL CMD:%02X"), command);
#endif // DEBUG_SEESAW_SOIL
return;
}
for (int i = 0; i < count; i++) {
uint32_t addr = (command & (COMMAND_RESET|COMMAND_ID)) ? SEESAW_SOIL_START_ADDRESS + i : SeeSoilSNS[i].address;
Wire.beginTransmission((uint8_t) addr);
Wire.write((uint8_t) regHigh);
Wire.write((uint8_t) regLow);
uint32_t err = Wire.endTransmission();
#ifdef DEBUG_SEESAW_SOIL
AddLog(LOG_LEVEL_DEBUG, PSTR("SEE: SNS=%u ADDR=%02X CMD=%02X ERR=%u"), i, addr, command, err);
#endif // DEBUG_SEESAW_SOIL
}
}
void seeSoilRead(uint32_t command) { // read values from sensors
uint8_t buf[4];
uint32_t num;
int32_t ret;
num = (command == COMMAND_TEMP) ? 4 : 2; // response size in bytes
for (int i = 0; i < SeeSoil.count; i++) { // for all sensors
if (num != Wire.requestFrom((uint8_t) SeeSoilSNS[i].address, (uint8_t) num)) { continue; }
bzero(buf, sizeof(buf));
for (int b = 0; b < num; b++) {
buf[b] = (uint8_t) Wire.read();
}
if (command == COMMAND_TEMP) {
ret = ((uint32_t)buf[0] << 24) | ((uint32_t)buf[1] << 16) |
((uint32_t)buf[2] << 8) | (uint32_t)buf[3];
SeeSoilSNS[i].temperature = ConvertTemp((1.0 / (1UL << 16)) * ret);
} else { // COMMAND_MOIST
ret = (uint32_t)buf[0] << 8 | (uint32_t)buf[1];
SeeSoilSNS[i].moisture = CAP_TO_MOIST(ret);
#ifdef SEESAW_SOIL_RAW
SeeSoilSNS[i].capacitance = ret;
#endif // SEESAW_SOIL_RAW
}
#ifdef DEBUG_SEESAW_SOIL
AddLog(LOG_LEVEL_DEBUG, PSTR("SEE: READ #%u ADDR=%02X NUM=%u RET=%X"), i, SeeSoilSNS[i].address, num, ret);
#endif // DEBUG_SEESAW_SOIL
}
}
/*********************************************************************************************\
* JSON routines
\*********************************************************************************************/
#ifdef SEESAW_SOIL_PUBLISH
void seeSoilEverySecond(void) { // update sensor values and publish if changed
static uint16_t old_moist[SEESAW_SOIL_MAX_SENSORS];
static bool firstcall = true;
for (int i = 0; i < SeeSoil.count; i++) {
if (firstcall) { firstcall = false; }
else {
if ((uint32_t) SeeSoilSNS[i].moisture != old_moist[i]) {
Response_P(PSTR("{")); // send values to MQTT & rules
seeSoilJson(i);
ResponseJsonEnd();
MqttPublishTeleSensor();
}
}
old_moist[i] = (uint32_t) SeeSoilSNS[i].moisture;
}
}
#endif // SEESAW_SOIL_PUBLISH
void seeSoilShow(bool json) {
char sensor_name[sizeof(SeeSoil.name) + 3];
for (uint32_t i = 0; i < SeeSoil.count; i++) {
seeSoilName(i, sensor_name, sizeof(sensor_name));
if (json) {
ResponseAppend_P(PSTR(",")); // compose tele json
seeSoilJson(i);
if (0 == TasmotaGlobal.tele_period) {
#ifdef USE_DOMOTICZ
DomoticzTempHumPressureSensor(SeeSoilSNS[i].temperature, SeeSoilSNS[i].moisture, -42.0f);
#endif // USE_DOMOTICZ
#ifdef USE_KNX
KnxSensor(KNX_TEMPERATURE, SeeSoilSNS[i].temperature);
KnxSensor(KNX_HUMIDITY, SeeSoilSNS[i].moisture);
#endif // USE_KNX
}
#ifdef USE_WEBSERVER
} else {
#ifdef SEESAW_SOIL_RAW
WSContentSend_PD(HTTP_SNS_ANALOG, sensor_name, 0, SeeSoilSNS[i].capacitance);
#endif // SEESAW_SOIL_RAW
WSContentSend_PD(HTTP_SNS_MOISTURE, sensor_name, (uint32_t) SeeSoilSNS[i].moisture);
WSContentSend_Temp(sensor_name, SeeSoilSNS[i].temperature);
#endif // USE_WEBSERVER
}
} // for each sensor connected
}
void seeSoilJson(int no) { // common json
char sensor_name[sizeof(SeeSoil.name) + 3];
seeSoilName(no, sensor_name, sizeof(sensor_name));
ResponseAppend_P(PSTR ("\"%s\":{\"" D_JSON_ID "\":\"%02X\",\"" D_JSON_TEMPERATURE "\":%*_f,\"" D_JSON_MOISTURE "\":%u}"),
sensor_name, SeeSoilSNS[no].address,
Settings->flag2.temperature_resolution, &SeeSoilSNS[no].temperature,
(uint32_t) SeeSoilSNS[no].moisture);
}
void seeSoilName(int no, char *name, int len) // generates a sensor name
{
#ifdef SEESAW_SOIL_PERSISTENT_NAMING
snprintf_P(name, len, PSTR("%s%c%02X"), SeeSoil.name, IndexSeparator(), SeeSoilSNS[no].address);
#else
if (SeeSoil.count > 1) {
snprintf_P(name, len, PSTR("%s%c%u"), SeeSoil.name, IndexSeparator(), no + 1);
}
else {
strlcpy(name, SeeSoil.name, len);
}
#endif // SEESAW_SOIL_PERSISTENT_NAMING
}
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
bool Xsns81(uint32_t function)
{
if (!I2cEnabled(XI2C_56)) { return false; }
bool result = false;
if (FUNC_INIT == function) {
seeSoilInit();
}
else if (SeeSoil.present){
switch (function) {
case FUNC_EVERY_50_MSECOND:
seeSoilEvery50ms();
break;
#ifdef SEESAW_SOIL_PUBLISH
case FUNC_EVERY_SECOND:
seeSoilEverySecond();
break;
#endif // SEESAW_SOIL_PUBLISH
case FUNC_JSON_APPEND:
seeSoilShow(1);
break;
#ifdef USE_WEBSERVER
case FUNC_WEB_SENSOR:
seeSoilShow(0);
break;
#endif // USE_WEBSERVER
}
}
return result;
}
#endif // USE_SEESAW_SOIL
#endif // USE_I2C
Reference in New Issue View Git Blame Copy Permalink