mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Tasmota/tasmota/tasmota_xdrv_driver/xdrv_36_keeloq.ino

288 lines
8.5 KiB
C++
Raw Permalink Blame History

/*
xdrv_36_keeloq.ino - Jarolift Keeloq shutter support for Tasmota
Copyright (C) 2021 he-so
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_KEELOQ
/*********************************************************************************************\
* Keeloq shutter support
*
* Uses hardware SPI and two user configurable GPIO's (CC1101 GDO0 and CC1101 GDO2)
*
* Considering the implementation these two user GPIO's are fake.
* Only CC1101 GDO0 is used and must always be GPIO05 dictated by the used CC1101 library.
\*********************************************************************************************/
#define XDRV_36 36
#include "cc1101.h"
#include <KeeloqLib.h>
#define SYNC_WORD 199
#define Lowpulse 400
#define Highpulse 800
const char kJaroliftCommands[] PROGMEM = "Keeloq|" // prefix
"SendRaw|SendButton|Set";
void (* const jaroliftCommand[])(void) PROGMEM = {
&CmndSendRaw, &CmdSendButton, &CmdSet};
CC1101 cc1101;
struct JAROLIFT_DEVICE {
int device_key_msb = 0x0; // stores cryptkey MSB
int device_key_lsb = 0x0; // stores cryptkey LSB
uint64_t button = 0x0; // 1000=0x8 up, 0100=0x4 stop, 0010=0x2 down, 0001=0x1 learning
int disc = 0x0100; // 0x0100 for single channel remote
uint32_t enc = 0x0; // stores the 32Bit encrypted code
uint64_t pack = 0; // Contains data to send.
int count = 0;
uint32_t serial = 0x0;
int8_t port_tx;
int8_t port_rx;
} jaroliftDevice;
void CmdSet(void)
{
if (XdrvMailbox.data_len > 0) {
if (XdrvMailbox.payload > 0) {
char *p;
uint32_t i = 0;
uint32_t param[4] = { 0 };
for (char *str = strtok_r(XdrvMailbox.data, ", ", &p); str && i < 4; str = strtok_r(nullptr, ", ", &p)) {
param[i] = strtoul(str, nullptr, 0);
i++;
}
for (uint32_t i = 0; i < 3; i++) {
if (param[i] < 1) { param[i] = 1; } // msb, lsb, serial, counter
}
DEBUG_DRIVER_LOG(PSTR("KLQ: params %08x %08x %08x %08x"), param[0], param[1], param[2], param[3]);
Settings->keeloq_master_msb = param[0];
Settings->keeloq_master_lsb = param[1];
Settings->keeloq_serial = param[2];
Settings->keeloq_count = param[3];
jaroliftDevice.serial = param[2];
jaroliftDevice.count = param[3];
GenerateDeviceCryptKey();
ResponseCmndDone();
} else {
DEBUG_DRIVER_LOG(PSTR("KLQ: no payload"));
}
} else {
DEBUG_DRIVER_LOG(PSTR("KLQ: no param"));
}
}
void GenerateDeviceCryptKey()
{
Keeloq k(Settings->keeloq_master_msb, Settings->keeloq_master_lsb);
jaroliftDevice.device_key_msb = k.decrypt(jaroliftDevice.serial | 0x60000000L);
jaroliftDevice.device_key_lsb = k.decrypt(jaroliftDevice.serial | 0x20000000L);
AddLog(LOG_LEVEL_DEBUG, PSTR("KLQ: generated device keys %08x %08x"), jaroliftDevice.device_key_msb, jaroliftDevice.device_key_lsb);
}
void CmdSendButton(void)
{
noInterrupts();
entertx();
if (XdrvMailbox.data_len > 0)
{
if (XdrvMailbox.payload > 0)
{
jaroliftDevice.button = strtoul(XdrvMailbox.data, nullptr, 0);
DEBUG_DRIVER_LOG(PSTR("KLQ: msb %08x, lsb %08x, serial %08x, disc %08x, button %08x"),
jaroliftDevice.device_key_msb, jaroliftDevice.device_key_lsb, jaroliftDevice.serial, jaroliftDevice.disc, jaroliftDevice.button);
AddLog(LOG_LEVEL_DEBUG, PSTR("KLQ: count %08x"), jaroliftDevice.count);
CreateKeeloqPacket();
jaroliftDevice.count++;
Settings->keeloq_count = jaroliftDevice.count;
for(int repeat = 0; repeat <= 1; repeat++)
{
uint64_t bitsToSend = jaroliftDevice.pack;
digitalWrite(jaroliftDevice.port_tx, LOW);
delayMicroseconds(1150);
SendSyncPreamble(13);
delayMicroseconds(3500);
for(int i=72; i>0; i--)
{
SendBit(bitsToSend & 0x0000000000000001);
bitsToSend >>= 1;
}
DEBUG_DRIVER_LOG(PSTR("KLQ: finished sending bits at %d"), micros());
delay(16); // delay in loop context is save for wdt
}
}
}
interrupts();
enterrx();
ResponseCmndDone();
}
void SendBit(byte bitToSend)
{
if (bitToSend==1)
{
digitalWrite(jaroliftDevice.port_tx, LOW); // Simple encoding of bit state 1
delayMicroseconds(Lowpulse);
digitalWrite(jaroliftDevice.port_tx, HIGH);
delayMicroseconds(Highpulse);
}
else
{
digitalWrite(jaroliftDevice.port_tx, LOW); // Simple encoding of bit state 0
delayMicroseconds(Highpulse);
digitalWrite(jaroliftDevice.port_tx, HIGH);
delayMicroseconds(Lowpulse);
}
}
void CmndSendRaw(void)
{
DEBUG_DRIVER_LOG(PSTR("KLQ: cmd send called at %d"), micros());
noInterrupts();
entertx();
for(int repeat = 0; repeat <= 1; repeat++)
{
if (XdrvMailbox.data_len > 0)
{
digitalWrite(jaroliftDevice.port_tx, LOW);
delayMicroseconds(1150);
SendSyncPreamble(13);
delayMicroseconds(3500);
for(int i=XdrvMailbox.data_len-1; i>=0; i--)
{
SendBit(XdrvMailbox.data[i] == '1');
}
DEBUG_DRIVER_LOG(PSTR("KLQ: finished sending bits at %d"), micros());
delay(16); // delay in loop context is save for wdt
}
interrupts();
}
enterrx();
ResponseCmndDone();
}
void enterrx() {
unsigned char marcState = 0;
cc1101.setRxState();
delay(2);
unsigned long rx_time = micros();
while (((marcState = cc1101.readStatusReg(CC1101_MARCSTATE)) & 0x1F) != 0x0D )
{
if (micros() - rx_time > 50000) break; // Quit when marcState does not change...
}
}
void entertx() {
unsigned char marcState = 0;
cc1101.setTxState();
delay(2);
unsigned long rx_time = micros();
while (((marcState = cc1101.readStatusReg(CC1101_MARCSTATE)) & 0x1F) != 0x13 && 0x14 && 0x15)
{
if (micros() - rx_time > 50000) break; // Quit when marcState does not change...
}
}
void SendSyncPreamble(int l)
{
for (int i = 0; i < l; ++i)
{
digitalWrite(jaroliftDevice.port_tx, LOW);
delayMicroseconds(400);
digitalWrite(jaroliftDevice.port_tx, HIGH);
delayMicroseconds(380);
}
}
void CreateKeeloqPacket()
{
Keeloq k(jaroliftDevice.device_key_msb, jaroliftDevice.device_key_lsb);
unsigned int result = (jaroliftDevice.disc << 16) | jaroliftDevice.count;
jaroliftDevice.pack = (uint64_t)0;
jaroliftDevice.pack |= jaroliftDevice.serial & 0xfffffffL;
jaroliftDevice.pack |= (jaroliftDevice.button & 0xfL) << 28;
jaroliftDevice.pack <<= 32;
jaroliftDevice.enc = k.encrypt(result);
jaroliftDevice.pack |= jaroliftDevice.enc;
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("KLQ: pack high %08x, low %08x"), jaroliftDevice.pack>>32, jaroliftDevice.pack);
}
void KeeloqInit()
{
jaroliftDevice.port_tx = Pin(GPIO_CC1101_GDO2); // Output port for transmission
jaroliftDevice.port_rx = Pin(GPIO_CC1101_GDO0); // Input port for reception
DEBUG_DRIVER_LOG(PSTR("KLQ: cc1101.init()"));
delay(100);
cc1101.init();
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("KLQ: CC1101 done"));
cc1101.setSyncWord(SYNC_WORD, false);
cc1101.setCarrierFreq(CFREQ_433);
cc1101.disableAddressCheck();
pinMode(jaroliftDevice.port_tx, OUTPUT);
pinMode(jaroliftDevice.port_rx, INPUT_PULLUP);
jaroliftDevice.serial = Settings->keeloq_serial;
jaroliftDevice.count = Settings->keeloq_count;
GenerateDeviceCryptKey();
}
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
bool Xdrv36(uint32_t function)
{
if (!PinUsed(GPIO_CC1101_GDO0) || !PinUsed(GPIO_CC1101_GDO2)) { return false; }
bool result = false;
switch (function) {
case FUNC_COMMAND:
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("KLQ: calling command"));
result = DecodeCommand(kJaroliftCommands, jaroliftCommand);
break;
case FUNC_INIT:
KeeloqInit();
DEBUG_DRIVER_LOG(PSTR("KLQ: init done"));
break;
case FUNC_ACTIVE:
result = true;
break;
}
return result;
}
#endif // USE_KEELOQ
Reference in New Issue View Git Blame Copy Permalink