mirror of https://github.com/arendst/Tasmota.git
200 lines
8.5 KiB
C++
200 lines
8.5 KiB
C++
/*
|
|
xnrg_30_dummy.ino - Dummy energy sensor support for Tasmota
|
|
|
|
Copyright (C) 2021 Theo Arends
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifdef USE_ENERGY_SENSOR
|
|
#ifdef USE_ENERGY_DUMMY
|
|
/*********************************************************************************************\
|
|
* Provides dummy energy monitoring for up to three channels based on relay count
|
|
*
|
|
* User is supposed to enter valid data for Voltage, Current and Power using commands
|
|
* VoltageSet 240 (= 240V), CurrentSet 0.417 (= 417mA) and PowerSet 100 (= 100W) or
|
|
* VoltageCal 24000 (= 240V), CurrentCal 41666 (= 0.417A) and PowerCal 10000 (= 100W)
|
|
* Each phase or channel can be set using commands overriding above commands
|
|
* EnergyConfig1, EnergyConfig2 and EnergyConfig3 for Current phases (0.417 = 417mA)
|
|
* EnergyConfig4, EnergyConfig5 and EnergyConfig6 for Active Power phases (100 = 100W)
|
|
* In addition on ESP32 supporting more channels:
|
|
* EnergyConfig11 to 18 for Current phases 1 to 8 (0.417 = 417mA)
|
|
* EnergyConfig111 to 118 for Active Power phases 1 to 8 (100 = 100W)
|
|
*
|
|
* Active Power is adjusted to calculated Apparent Power (=U*I) if the latter is smaller than the first
|
|
*
|
|
* Enable by selecting any GPIO as Option A2
|
|
\*********************************************************************************************/
|
|
|
|
#define XNRG_30 30
|
|
|
|
#define NRG_DUMMY_U_COMMON true // Phase voltage = false, Common voltage = true
|
|
#define NRG_DUMMY_F_COMMON true // Phase frequency = false, Common frequency = true
|
|
#define NRG_DUMMY_DC false // AC = false, DC = true;
|
|
#define NRG_DUMMY_OVERTEMP true // Use global temperature for overtemp detection
|
|
|
|
#define NRG_DUMMY_UREF 24000 // Voltage 240.00 V (= P / I)
|
|
#define NRG_DUMMY_IREF 41666 // Current 0.417 A (= P / U)
|
|
#define NRG_DUMMY_PREF 10000 // Power 100.00 W (= U * I)
|
|
#define NRG_DUMMY_FREF 5000 // Frequency 50.00 Hz
|
|
|
|
/********************************************************************************************/
|
|
|
|
struct {
|
|
int32_t current[ENERGY_MAX_PHASES] = { 0 };
|
|
int32_t power[ENERGY_MAX_PHASES] = { 0 };
|
|
} NrgDummy;
|
|
|
|
void NrgDummyEverySecond(void) {
|
|
if (Energy->power_on) { // Powered on
|
|
for (uint32_t channel = 0; channel < Energy->phase_count; channel++) {
|
|
|
|
float power_calibration = (float)EnergyGetCalibration(ENERGY_POWER_CALIBRATION, channel) / 100;
|
|
float voltage_calibration = (float)EnergyGetCalibration(ENERGY_VOLTAGE_CALIBRATION, channel) / 100;
|
|
float current_calibration = (float)EnergyGetCalibration(ENERGY_CURRENT_CALIBRATION, channel) / 100000;
|
|
float frequency_calibration = (float)EnergyGetCalibration(ENERGY_FREQUENCY_CALIBRATION, channel) / 100;
|
|
|
|
if (voltage_calibration > 100) {
|
|
Energy->voltage[channel] = voltage_calibration; // V
|
|
}
|
|
Energy->frequency[channel] = (frequency_calibration > 45) ? frequency_calibration : NAN; // Hz
|
|
if (bitRead(TasmotaGlobal.power, channel)) { // Emulate power read only if device is powered on
|
|
Energy->active_power[channel] = (NrgDummy.power[channel]) ? ((float)NrgDummy.power[channel] / 1000) : power_calibration; // W
|
|
if (0 == Energy->active_power[channel]) {
|
|
Energy->current[channel] = 0;
|
|
} else {
|
|
Energy->current[channel] = (NrgDummy.current[channel]) ? ((float)NrgDummy.current[channel] / 1000) : current_calibration; // A
|
|
Energy->kWhtoday_delta[channel] += Energy->active_power[channel] * 1000 / 36;
|
|
}
|
|
Energy->data_valid[channel] = 0;
|
|
}
|
|
}
|
|
EnergyUpdateToday();
|
|
}
|
|
}
|
|
|
|
bool NrgDummyCommand(void) {
|
|
bool serviced = true;
|
|
|
|
int32_t value = (int32_t)(CharToFloat(XdrvMailbox.data) * 1000); // 1.234 = 1234, -1.234 = -1234
|
|
uint32_t abs_value = abs(value) / 10; // 1.23 = 123, -1.23 = 123
|
|
|
|
if ((CMND_POWERCAL == Energy->command_code) ||
|
|
(CMND_VOLTAGECAL == Energy->command_code) ||
|
|
(CMND_CURRENTCAL == Energy->command_code)) {
|
|
// Service in xdrv_03_energy.ino
|
|
}
|
|
else if (CMND_POWERSET == Energy->command_code) {
|
|
if (XdrvMailbox.data_len) {
|
|
if ((abs_value >= 100) && (abs_value <= 16000000)) { // Between 1.00 and 160000.00 W
|
|
XdrvMailbox.payload = abs_value;
|
|
}
|
|
}
|
|
}
|
|
else if (CMND_VOLTAGESET == Energy->command_code) {
|
|
if (XdrvMailbox.data_len) {
|
|
if ((abs_value >= 10000) && (abs_value <= 40000)) { // Between 100.00 and 400.00 V
|
|
XdrvMailbox.payload = abs_value;
|
|
}
|
|
}
|
|
}
|
|
else if (CMND_CURRENTSET == Energy->command_code) {
|
|
if (XdrvMailbox.data_len) {
|
|
if ((abs_value >= 1000) && (abs_value <= 40000000)) { // Between 10.00 mA and 400.00000 A
|
|
XdrvMailbox.payload = abs_value;
|
|
}
|
|
}
|
|
}
|
|
else if (CMND_FREQUENCYSET == Energy->command_code) {
|
|
if (XdrvMailbox.data_len) {
|
|
if ((abs_value >= 4500) && (abs_value <= 6500)) { // Between 45.00 and 65.00 Hz
|
|
XdrvMailbox.payload = abs_value;
|
|
}
|
|
}
|
|
}
|
|
else if (CMND_ENERGYCONFIG == Energy->command_code) {
|
|
AddLog(LOG_LEVEL_DEBUG, PSTR("NRG: Config index %d, payload %d, value %d, data '%s'"),
|
|
XdrvMailbox.index, XdrvMailbox.payload, value, XdrvMailbox.data ? XdrvMailbox.data : "null" );
|
|
|
|
// EnergyConfig1 to 3 = Set Energy->current[channel] in A like 0.417 for 417mA
|
|
if ((XdrvMailbox.index > 0) && (XdrvMailbox.index < 4)) {
|
|
NrgDummy.current[XdrvMailbox.index -1] = value;
|
|
}
|
|
// EnergyConfig4 to 6 = Set Energy->active_power[channel] in W like 100 for 100W
|
|
if ((XdrvMailbox.index > 3) && (XdrvMailbox.index < 7)) {
|
|
NrgDummy.power[XdrvMailbox.index -4] = value;
|
|
}
|
|
#ifdef ESP32
|
|
// EnergyConfig11 to 18 = Set Energy->current[channel] in A like 0.417 for 417mA
|
|
if ((XdrvMailbox.index > 10) && (XdrvMailbox.index < ENERGY_MAX_PHASES + 10)) {
|
|
NrgDummy.current[XdrvMailbox.index -1] = value;
|
|
}
|
|
// EnergyConfig111 to 118 = Set Energy->active_power[channel] in W like 100 for 100W
|
|
if ((XdrvMailbox.index > 110) && (XdrvMailbox.index < ENERGY_MAX_PHASES +110)) {
|
|
NrgDummy.power[XdrvMailbox.index -4] = value;
|
|
}
|
|
#endif
|
|
}
|
|
else serviced = false; // Unknown command
|
|
|
|
return serviced;
|
|
}
|
|
|
|
void NrgDummyDrvInit(void) {
|
|
uint32_t phase_count = (Settings->param[P_DUMMY_RELAYS] > 0) ? Settings->param[P_DUMMY_RELAYS] : TasmotaGlobal.devices_present; // SetOption48 - (Energy) Support energy dummy relays
|
|
if (TasmotaGlobal.gpio_optiona.dummy_energy && phase_count) {
|
|
Energy->phase_count = (phase_count < ENERGY_MAX_PHASES) ? phase_count : ENERGY_MAX_PHASES;
|
|
|
|
if (HLW_PREF_PULSE == EnergyGetCalibration(ENERGY_POWER_CALIBRATION)) {
|
|
for (uint32_t i = 0; i < Energy->phase_count; i++) {
|
|
EnergySetCalibration(ENERGY_POWER_CALIBRATION, NRG_DUMMY_PREF, i);
|
|
EnergySetCalibration(ENERGY_VOLTAGE_CALIBRATION, NRG_DUMMY_UREF, i);
|
|
EnergySetCalibration(ENERGY_CURRENT_CALIBRATION, NRG_DUMMY_IREF, i);
|
|
EnergySetCalibration(ENERGY_FREQUENCY_CALIBRATION, NRG_DUMMY_FREF, i);
|
|
}
|
|
}
|
|
|
|
Energy->voltage_common = NRG_DUMMY_U_COMMON; // Phase voltage = false, Common voltage = true
|
|
Energy->frequency_common = NRG_DUMMY_F_COMMON; // Phase frequency = false, Common frequency = true
|
|
Energy->type_dc = NRG_DUMMY_DC; // AC = false, DC = true;
|
|
Energy->use_overtemp = NRG_DUMMY_OVERTEMP; // Use global temperature for overtemp detection
|
|
|
|
TasmotaGlobal.energy_driver = XNRG_30;
|
|
}
|
|
}
|
|
|
|
/*********************************************************************************************\
|
|
* Interface
|
|
\*********************************************************************************************/
|
|
|
|
bool Xnrg30(uint32_t function) {
|
|
bool result = false;
|
|
|
|
switch (function) {
|
|
case FUNC_ENERGY_EVERY_SECOND:
|
|
NrgDummyEverySecond();
|
|
break;
|
|
case FUNC_COMMAND:
|
|
result = NrgDummyCommand();
|
|
break;
|
|
case FUNC_PRE_INIT:
|
|
NrgDummyDrvInit();
|
|
break;
|
|
}
|
|
return result;
|
|
}
|
|
|
|
#endif // USE_ENERGY_DUMMY
|
|
#endif // USE_ENERGY_SENSOR
|