mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Tasmota/sonoff/xdrv_16_tuyadimmer.ino

339 lines
12 KiB
C++
Raw Blame History

/*
xdrv_16_tuyadimmer.ino - Tuya dimmer support for Sonoff-Tasmota
Copyright (C) 2018 digiblur, Joel Stein and Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_TUYA_DIMMER
#ifndef TUYA_DIMMER_ID
#define TUYA_DIMMER_ID 3
#endif
#define TUYA_BUFFER_SIZE 256
#include <TasmotaSerial.h>
TasmotaSerial *TuyaSerial = nullptr;
uint8_t tuya_new_dim = 0; // Tuya dimmer value temp
boolean tuya_ignore_dim = false; // Flag to skip serial send to prevent looping when processing inbound states from the faceplate interaction
uint8_t tuya_cmd_status = 0; // Current status of serial-read
uint8_t tuya_cmd_checksum = 0; // Checksum of tuya command
uint8_t tuya_data_len = 0; // Data lenght of command
int8_t tuya_wifi_state = -2;
char tuya_buffer[TUYA_BUFFER_SIZE]; // Serial receive buffer
int tuya_byte_counter = 0; // Index in serial receive buffer
boolean TuyaSetPower()
{
boolean status = false;
uint8_t rpower = XdrvMailbox.index;
int16_t source = XdrvMailbox.payload;
if (source != SRC_SWITCH && TuyaSerial) { // ignore to prevent loop from pushing state from faceplate interaction
snprintf_P(log_data, sizeof(log_data), PSTR("TYA: SetDevicePower.rpower=%d"), rpower);
AddLog(LOG_LEVEL_DEBUG);
TuyaSerial->write((uint8_t)0x55); // Tuya header 55AA
TuyaSerial->write((uint8_t)0xAA);
TuyaSerial->write((uint8_t)0x00); // version 00
TuyaSerial->write((uint8_t)0x06); // Tuya command 06
TuyaSerial->write((uint8_t)0x00);
TuyaSerial->write((uint8_t)0x05); // following data length 0x05
TuyaSerial->write((uint8_t)0x01); // relay number 1,2,3
TuyaSerial->write((uint8_t)0x01);
TuyaSerial->write((uint8_t)0x00);
TuyaSerial->write((uint8_t)0x01);
TuyaSerial->write((uint8_t)rpower); // status
TuyaSerial->write((uint8_t)0x0D + rpower); // checksum sum of all bytes in packet mod 256
TuyaSerial->flush();
status = true;
}
return status;
}
void LightSerialDuty(uint8_t duty)
{
if (duty > 0 && !tuya_ignore_dim && TuyaSerial) {
if (duty < 25) {
duty = 25; // dimming acts odd below 25(10%) - this mirrors the threshold set on the faceplate itself
}
TuyaSerial->write((uint8_t)0x55); // Tuya header 55AA
TuyaSerial->write((uint8_t)0xAA);
TuyaSerial->write((uint8_t)0x00); // version 00
TuyaSerial->write((uint8_t)0x06); // Tuya command 06 - send order
TuyaSerial->write((uint8_t)0x00);
TuyaSerial->write((uint8_t)0x08); // following data length 0x08
TuyaSerial->write((uint8_t)Settings.param[P_TUYA_DIMMER_ID]); // dimmer id
TuyaSerial->write((uint8_t)0x02); // type=value
TuyaSerial->write((uint8_t)0x00); // length hi
TuyaSerial->write((uint8_t)0x04); // length low
TuyaSerial->write((uint8_t)0x00); //
TuyaSerial->write((uint8_t)0x00); //
TuyaSerial->write((uint8_t)0x00); //
TuyaSerial->write((uint8_t) duty ); // dim value (0-255)
TuyaSerial->write((uint8_t) byte(Settings.param[P_TUYA_DIMMER_ID] + 19 + duty) ); // checksum:sum of all bytes in packet mod 256
TuyaSerial->flush();
snprintf_P(log_data, sizeof(log_data), PSTR( "TYA: Send Serial Packet Dim Value=%d (id=%d)"), duty, Settings.param[P_TUYA_DIMMER_ID]);
AddLog(LOG_LEVEL_DEBUG);
} else {
tuya_ignore_dim = false; // reset flag
snprintf_P(log_data, sizeof(log_data), PSTR( "TYA: Send Dim Level skipped due to 0 or already set. Value=%d"), duty);
AddLog(LOG_LEVEL_DEBUG);
}
}
void TuyaPacketProcess()
{
char scmnd[20];
snprintf_P(log_data, sizeof(log_data), PSTR("TYA: Packet Size=%d"), tuya_byte_counter);
AddLog(LOG_LEVEL_DEBUG);
if (tuya_byte_counter == 7 && tuya_buffer[3] == 14 ) { // heartbeat packet
AddLog_P(LOG_LEVEL_DEBUG, PSTR("TYA: Heartbeat"));
}
else if (tuya_byte_counter == 12 && tuya_buffer[3] == 7 && tuya_buffer[5] == 5) { // on/off packet
snprintf_P(log_data, sizeof(log_data),PSTR("TYA: Rcvd - %s State"),tuya_buffer[10]?"On":"Off");
AddLog(LOG_LEVEL_DEBUG);
if((power || Settings.light_dimmer > 0) && (power != tuya_buffer[10])) {
ExecuteCommandPower(1, tuya_buffer[10], SRC_SWITCH); // send SRC_SWITCH? to use as flag to prevent loop from inbound states from faceplate interaction
}
}
else if (tuya_byte_counter == 15 && tuya_buffer[3] == 7 && tuya_buffer[5] == 8) { // dim packet
snprintf_P(log_data, sizeof(log_data), PSTR("TYA: Rcvd Dim State=%d"), tuya_buffer[13]);
AddLog(LOG_LEVEL_DEBUG);
tuya_new_dim = round(tuya_buffer[13] * (100. / 255.));
if((power) && (tuya_new_dim > 0) && (abs(tuya_new_dim - Settings.light_dimmer) > 2)) {
snprintf_P(log_data, sizeof(log_data), PSTR("TYA: Send CMND_DIMMER=%d"), tuya_new_dim );
AddLog(LOG_LEVEL_DEBUG);
snprintf_P(scmnd, sizeof(scmnd), PSTR(D_CMND_DIMMER " %d"), tuya_new_dim );
snprintf_P(log_data, sizeof(log_data), PSTR("TYA: Send CMND_DIMMER_STR=%s"), scmnd );
AddLog(LOG_LEVEL_DEBUG);
tuya_ignore_dim = true;
ExecuteCommand(scmnd, SRC_SWITCH);
}
}
else if (tuya_byte_counter == 8 && tuya_buffer[3] == 5 && tuya_buffer[5] == 1 && tuya_buffer[7] == 5 ) { // reset WiFi settings packet
AddLog_P(LOG_LEVEL_DEBUG, PSTR("TYA: WiFi Reset Rcvd"));
TuyaResetWifi();
}
else if (tuya_byte_counter == 7 && tuya_buffer[3] == 3 && tuya_buffer[6] == 2) { // WiFi LED has been sucessfully set.
AddLog_P(LOG_LEVEL_DEBUG, PSTR("TYA: WiFi LED set ACK"));
tuya_wifi_state = WifiState();
}
}
void TuyaSerialInput()
{
while (TuyaSerial->available()) {
yield();
byte serial_in_byte = TuyaSerial->read();
//snprintf_P(log_data, sizeof(log_data), PSTR("TYA: serial_in_byte %d, tuya_cmd_status %d, tuya_cmd_checksum %d, tuya_data_len %d, tuya_byte_counter %d"), serial_in_byte, tuya_cmd_status, tuya_cmd_checksum, tuya_data_len, tuya_byte_counter);
//AddLog(LOG_LEVEL_DEBUG);
if (serial_in_byte == 0x55) { // Start TUYA Packet
tuya_cmd_status = 1;
tuya_buffer[tuya_byte_counter++] = serial_in_byte;
tuya_cmd_checksum += serial_in_byte;
}
else if (tuya_cmd_status == 1 && serial_in_byte == 0xAA){ // Only packtes with header 0x55AA are valid
tuya_cmd_status = 2;
AddLog_P(LOG_LEVEL_DEBUG, PSTR("TYA: 0x55AA Packet Start"));
tuya_byte_counter = 0;
tuya_buffer[tuya_byte_counter++] = 0x55;
tuya_buffer[tuya_byte_counter++] = 0xAA;
tuya_cmd_checksum = 0xFF;
}
else if (tuya_cmd_status == 2){
if(tuya_byte_counter == 5){ // Get length of data
tuya_cmd_status = 3;
tuya_data_len = serial_in_byte;
}
tuya_cmd_checksum += serial_in_byte;
tuya_buffer[tuya_byte_counter++] = serial_in_byte;
}
else if ((tuya_cmd_status == 3) && (tuya_byte_counter == (6 + tuya_data_len)) && (tuya_cmd_checksum == serial_in_byte)){ // Compare checksum and process packet
tuya_buffer[tuya_byte_counter++] = serial_in_byte;
snprintf_P(log_data, sizeof(log_data), PSTR("TYA: 0x55 Packet End: \""));
for (int i = 0; i < tuya_byte_counter; i++) {
snprintf_P(log_data, sizeof(log_data), PSTR("%s%02x"), log_data, tuya_buffer[i]);
}
snprintf_P(log_data, sizeof(log_data), PSTR("%s\""), log_data);
AddLog(LOG_LEVEL_DEBUG);
TuyaPacketProcess();
tuya_byte_counter = 0;
tuya_cmd_status = 0;
tuya_cmd_checksum = 0;
tuya_data_len = 0;
} // read additional packets from TUYA
else if(tuya_byte_counter < TUYA_BUFFER_SIZE -1) { // add char to string if it still fits
tuya_buffer[tuya_byte_counter++] = serial_in_byte;
tuya_cmd_checksum += serial_in_byte;
} else {
tuya_byte_counter = 0;
tuya_cmd_status = 0;
tuya_cmd_checksum = 0;
tuya_data_len = 0;
}
}
}
boolean TuyaModuleSelected()
{
if (!(pin[GPIO_TUYA_RX] < 99) || !(pin[GPIO_TUYA_TX] < 99)) { // fallback to hardware-serial if not explicitly selected
pin[GPIO_TUYA_RX] = 1;
pin[GPIO_TUYA_TX] = 3;
}
light_type = LT_SERIAL;
return true;
}
void TuyaSetWifiLed(){
uint8_t wifi_state = 0x02;
switch(WifiState()){
case WIFI_SMARTCONFIG:
wifi_state = 0x00;
break;
case WIFI_MANAGER:
case WIFI_WPSCONFIG:
wifi_state = 0x01;
break;
case WIFI_RESTART:
wifi_state = 0x03;
break;
}
snprintf_P(log_data, sizeof(log_data), "TYA: Set WiFi LED to state %d (%d)", wifi_state, WifiState());
AddLog(LOG_LEVEL_DEBUG);
TuyaSerial->write((uint8_t)0x55); // header 55AA
TuyaSerial->write((uint8_t)0xAA);
TuyaSerial->write((uint8_t)0x00); // version 00
TuyaSerial->write((uint8_t)0x03); // command 03 - set wifi state
TuyaSerial->write((uint8_t)0x00);
TuyaSerial->write((uint8_t)0x01); // following data length 0x01
TuyaSerial->write((uint8_t)wifi_state); // wifi state (0x00 == smartconfig, 0x01 == AP, 0x02 == not connected, 0x03 == connected)
TuyaSerial->write((uint8_t)(0x03 + wifi_state)); // checksum:sum of all bytes in packet mod 256
TuyaSerial->flush();
}
void TuyaInit()
{
if (!Settings.param[P_TUYA_DIMMER_ID]) {
Settings.param[P_TUYA_DIMMER_ID] = TUYA_DIMMER_ID;
}
TuyaSerial = new TasmotaSerial(pin[GPIO_TUYA_RX], pin[GPIO_TUYA_TX], 1);
if (TuyaSerial->begin(9600)) {
if (TuyaSerial->hardwareSerial()) { ClaimSerial(); }
// Get current status of MCU
snprintf_P(log_data, sizeof(log_data), "TYA: Request MCU state");
AddLog(LOG_LEVEL_DEBUG);
TuyaSerial->write((uint8_t)0x55); // header 55AA
TuyaSerial->write((uint8_t)0xAA);
TuyaSerial->write((uint8_t)0x00); // version 00
TuyaSerial->write((uint8_t)0x08); // command 08 - get status
TuyaSerial->write((uint8_t)0x00);
TuyaSerial->write((uint8_t)0x00); // following data length 0x00
TuyaSerial->write((uint8_t)0x07); // checksum:sum of all bytes in packet mod 256
TuyaSerial->flush();
}
}
void TuyaResetWifi()
{
if (!Settings.flag.button_restrict) {
char scmnd[20];
tuya_wifi_state = -1;
snprintf_P(scmnd, sizeof(scmnd), D_CMND_WIFICONFIG " %d", 2);
ExecuteCommand(scmnd, SRC_BUTTON);
}
}
boolean TuyaButtonPressed()
{
if ((PRESSED == XdrvMailbox.payload) && (NOT_PRESSED == lastbutton[XdrvMailbox.index])) {
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_APPLICATION D_BUTTON "%d " D_LEVEL_10), XdrvMailbox.index +1);
AddLog(LOG_LEVEL_DEBUG);
TuyaResetWifi();
}
return true; // Serviced here
}
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
#define XDRV_16
boolean Xdrv16(byte function)
{
boolean result = false;
if (TUYA_DIMMER == Settings.module) {
switch (function) {
case FUNC_MODULE_INIT:
result = TuyaModuleSelected();
break;
case FUNC_INIT:
TuyaInit();
break;
case FUNC_LOOP:
if (TuyaSerial) { TuyaSerialInput(); }
break;
case FUNC_SET_DEVICE_POWER:
result = TuyaSetPower();
break;
case FUNC_BUTTON_PRESSED:
result = TuyaButtonPressed();
break;
case FUNC_EVERY_SECOND:
if(TuyaSerial && tuya_wifi_state!=WifiState()) { TuyaSetWifiLed(); }
break;
}
}
return result;
}
#endif // USE_TUYA_DIMMER
Reference in New Issue View Git Blame Copy Permalink