Mirror of arendst/Tasmota@github.com - Open-source firmware for ESP8266/8285/32-based smart home products
Go to file
arendst 0747e0fc68 Updated MH-Z19 drivers
5.10.0a
 * Add (experimental) support for sensor SHT3x
 * Add support
for sensor MH-Z19(B) using serial interface to be enabled with define
USE_MHZ19_HARD_SERIAL in user_config.h (#561, #1248)
 * Add
(experimental) support for sensor MH-Z19(B) using SoftwareSerial to be
enabled with define USE_MHZ19_SOFT_SERIAL_OBSOLETE in user_config.h
(#561, #1248)
 * Add (experimental) support for sensor MH-Z19(B) using
stripped SoftwareSerial to be enabled with define USE_MHZ19_SOFT_SERIAL
in user_config.h (#561, #1248)
 * Add support for iTead SI7021
temperature and humidity sensor by consolidating DHT22 into AM2301 and
using former DHT22 as SI7021 (#735)
 * Fix BME280 calculation (#1051)
 *
Add support for BME680 using adafruit libraries (#1212)
 * Change
ADS1115 default voltage range from +/-2V to +/-6V (#1289)
 * Add
multipress support and more user configurable options to Sonoff Dual R2
(#1291)
 * Fix Sonoff Bridge missed learned key if learned data contains
0x55 (End of Transmission) flag (#1095, #1294)
 * Add support for
TSL2561 using adafruit library (#661, #1311)
 * Add alternative support
for SHT3x (#1314)
2017-12-08 14:14:10 +01:00
api v5.1.4 2017-06-01 17:37:30 +02:00
arduino Add support for ESP8266 core v2.4.0-rc2 2017-10-17 10:02:50 +02:00
lib Updated MH-Z19 drivers 2017-12-08 14:14:10 +01:00
pio Add optiomal pio OTA upload support 2017-09-30 15:53:50 +02:00
sonoff Updated MH-Z19 drivers 2017-12-08 14:14:10 +01:00
.gitattributes Add linefeed normalisation 2017-03-07 09:36:01 +01:00
.gitignore Update platformio info 2017-01-28 16:44:00 +01:00
.travis.yml v5.1.4 2017-06-01 17:37:30 +02:00
LICENSE.txt v5.1.0 2017-05-13 13:02:10 +02:00
README.md v5.10.0a Add sensor SHT3X 2017-12-01 15:59:53 +01:00
esp8266.flash.1m0.ld Add 1M flash with no spiffs linker script 2017-04-25 18:16:40 +02:00
platformio.ini v5.9.1j - Add Dual R2, Rewrite DS18x20 and fixes 2017-11-27 17:46:51 +01:00

README.md

Sonoff-Tasmota

Provide ESP8266 based Sonoff by iTead Studio and ElectroDragon IoT Relay with Serial, Web and MQTT control allowing 'Over the Air' or OTA firmware updates using Arduino IDE.

Current version is 5.10.0a - See sonoff/_releasenotes.ino for change information.

ATTENTION All versions

Only Flash Mode DOUT is supported. Do not use Flash Mode DIO / QIO / QOUT as it might seem to brick your device.

See Wiki for background information.

ATTENTION Version 5 and up

These versions use a new linker script to free flash memory for future code additions. It moves the settings from Spiffs to Eeprom. If you compile your own firmware download the new linker to your IDE or Platformio base folder. See Wiki > Prerequisite.

Best practice to implement is:

  • Open the webpage to your device
  • Perform option Backup Configuration
  • Upgrade new firmware using Firmware upgrade
  • If configuration conversion fails keep the webpage open and perform Restore Configuration

You should now have a device with 32k more code memory to play with.

Version Information

  • Sonoff-Tasmota provides all (Sonoff) modules in one file and starts with module Sonoff Basic.
  • Once uploaded select module using the configuration webpage or the commands Modules and Module.
  • After reboot select config menu again or use commands GPIOs and GPIO to change GPIO with desired sensor.

See Wiki for more information.
See Community for forum and more user experience.

The following devices are supported:

License

This program is licensed under GPL-3.0