mirror of https://github.com/arendst/Tasmota.git
147 lines
4.2 KiB
C++
147 lines
4.2 KiB
C++
/*
|
|
* IRremoteESP8266: IRServer - demonstrates sending IR codes controlled from a webserver
|
|
* Version 0.3 May, 2019
|
|
* Version 0.2 June, 2017
|
|
* Copyright 2015 Mark Szabo
|
|
* Copyright 2019 David Conran
|
|
*
|
|
* An IR LED circuit *MUST* be connected to the ESP on a pin
|
|
* as specified by kIrLed below.
|
|
*
|
|
* TL;DR: The IR LED needs to be driven by a transistor for a good result.
|
|
*
|
|
* Suggested circuit:
|
|
* https://github.com/crankyoldgit/IRremoteESP8266/wiki#ir-sending
|
|
*
|
|
* Common mistakes & tips:
|
|
* * Don't just connect the IR LED directly to the pin, it won't
|
|
* have enough current to drive the IR LED effectively.
|
|
* * Make sure you have the IR LED polarity correct.
|
|
* See: https://learn.sparkfun.com/tutorials/polarity/diode-and-led-polarity
|
|
* * Typical digital camera/phones can be used to see if the IR LED is flashed.
|
|
* Replace the IR LED with a normal LED if you don't have a digital camera
|
|
* when debugging.
|
|
* * Avoid using the following pins unless you really know what you are doing:
|
|
* * Pin 0/D3: Can interfere with the boot/program mode & support circuits.
|
|
* * Pin 1/TX/TXD0: Any serial transmissions from the ESP8266 will interfere.
|
|
* * Pin 3/RX/RXD0: Any serial transmissions to the ESP8266 will interfere.
|
|
* * ESP-01 modules are tricky. We suggest you use a module with more GPIOs
|
|
* for your first time. e.g. ESP-12 etc.
|
|
*/
|
|
#include <Arduino.h>
|
|
#if defined(ESP8266)
|
|
#include <ESP8266WiFi.h>
|
|
#include <ESP8266WebServer.h>
|
|
#include <ESP8266mDNS.h>
|
|
#endif // ESP8266
|
|
#if defined(ESP32)
|
|
#include <WiFi.h>
|
|
#include <WebServer.h>
|
|
#include <ESPmDNS.h>
|
|
#endif // ESP32
|
|
#include <IRremoteESP8266.h>
|
|
#include <IRsend.h>
|
|
#include <WiFiClient.h>
|
|
|
|
const char* kSsid = ".....";
|
|
const char* kPassword = ".....";
|
|
MDNSResponder mdns;
|
|
|
|
#if defined(ESP8266)
|
|
ESP8266WebServer server(80);
|
|
#undef HOSTNAME
|
|
#define HOSTNAME "esp8266"
|
|
#endif // ESP8266
|
|
#if defined(ESP32)
|
|
WebServer server(80);
|
|
#undef HOSTNAME
|
|
#define HOSTNAME "esp32"
|
|
#endif // ESP32
|
|
|
|
const uint16_t kIrLed = 4; // ESP GPIO pin to use. Recommended: 4 (D2).
|
|
|
|
IRsend irsend(kIrLed); // Set the GPIO to be used to sending the message.
|
|
|
|
void handleRoot() {
|
|
server.send(200, "text/html",
|
|
"<html>" \
|
|
"<head><title>" HOSTNAME " Demo</title></head>" \
|
|
"<body>" \
|
|
"<h1>Hello from " HOSTNAME ", you can send NEC encoded IR" \
|
|
"signals from here!</h1>" \
|
|
"<p><a href=\"ir?code=16769055\">Send 0xFFE01F</a></p>" \
|
|
"<p><a href=\"ir?code=16429347\">Send 0xFAB123</a></p>" \
|
|
"<p><a href=\"ir?code=16771222\">Send 0xFFE896</a></p>" \
|
|
"</body>" \
|
|
"</html>");
|
|
}
|
|
|
|
void handleIr() {
|
|
for (uint8_t i = 0; i < server.args(); i++) {
|
|
if (server.argName(i) == "code") {
|
|
uint32_t code = strtoul(server.arg(i).c_str(), NULL, 10);
|
|
#if SEND_NEC
|
|
irsend.sendNEC(code, 32);
|
|
#endif // SEND_NEC
|
|
}
|
|
}
|
|
handleRoot();
|
|
}
|
|
|
|
void handleNotFound() {
|
|
String message = "File Not Found\n\n";
|
|
message += "URI: ";
|
|
message += server.uri();
|
|
message += "\nMethod: ";
|
|
message += (server.method() == HTTP_GET)?"GET":"POST";
|
|
message += "\nArguments: ";
|
|
message += server.args();
|
|
message += "\n";
|
|
for (uint8_t i = 0; i < server.args(); i++)
|
|
message += " " + server.argName(i) + ": " + server.arg(i) + "\n";
|
|
server.send(404, "text/plain", message);
|
|
}
|
|
|
|
void setup(void) {
|
|
irsend.begin();
|
|
|
|
Serial.begin(115200);
|
|
WiFi.begin(kSsid, kPassword);
|
|
Serial.println("");
|
|
|
|
// Wait for connection
|
|
while (WiFi.status() != WL_CONNECTED) {
|
|
delay(500);
|
|
Serial.print(".");
|
|
}
|
|
Serial.println("");
|
|
Serial.print("Connected to ");
|
|
Serial.println(kSsid);
|
|
Serial.print("IP address: ");
|
|
Serial.println(WiFi.localIP().toString());
|
|
|
|
#if defined(ESP8266)
|
|
if (mdns.begin(HOSTNAME, WiFi.localIP())) {
|
|
#else // ESP8266
|
|
if (mdns.begin(HOSTNAME)) {
|
|
#endif // ESP8266
|
|
Serial.println("MDNS responder started");
|
|
}
|
|
|
|
server.on("/", handleRoot);
|
|
server.on("/ir", handleIr);
|
|
|
|
server.on("/inline", [](){
|
|
server.send(200, "text/plain", "this works as well");
|
|
});
|
|
|
|
server.onNotFound(handleNotFound);
|
|
|
|
server.begin();
|
|
Serial.println("HTTP server started");
|
|
}
|
|
|
|
void loop(void) {
|
|
server.handleClient();
|
|
}
|