mirror of https://github.com/arendst/Tasmota.git
79 lines
2.2 KiB
C++
79 lines
2.2 KiB
C++
/***************************************************************************
|
|
This is a library for the BME680 gas, humidity, temperature & pressure sensor
|
|
|
|
Designed specifically to work with the Adafruit BME680 Breakout
|
|
----> http://www.adafruit.com/products/3660
|
|
|
|
These sensors use I2C or SPI to communicate, 2 or 4 pins are required
|
|
to interface.
|
|
|
|
Adafruit invests time and resources providing this open source code,
|
|
please support Adafruit and open-source hardware by purchasing products
|
|
from Adafruit!
|
|
|
|
Written by Limor Fried & Kevin Townsend for Adafruit Industries.
|
|
BSD license, all text above must be included in any redistribution
|
|
***************************************************************************/
|
|
|
|
#include <Wire.h>
|
|
#include <SPI.h>
|
|
#include <Adafruit_Sensor.h>
|
|
#include "Adafruit_BME680.h"
|
|
|
|
#define BME_SCK 13
|
|
#define BME_MISO 12
|
|
#define BME_MOSI 11
|
|
#define BME_CS 10
|
|
|
|
#define SEALEVELPRESSURE_HPA (1013.25)
|
|
|
|
Adafruit_BME680 bme; // I2C
|
|
//Adafruit_BME680 bme(BME_CS); // hardware SPI
|
|
//Adafruit_BME680 bme(BME_CS, BME_MOSI, BME_MISO, BME_SCK);
|
|
|
|
void setup() {
|
|
Serial.begin(9600);
|
|
while (!Serial);
|
|
Serial.println(F("BME680 test"));
|
|
|
|
if (!bme.begin()) {
|
|
Serial.println("Could not find a valid BME680 sensor, check wiring!");
|
|
while (1);
|
|
}
|
|
|
|
// Set up oversampling and filter initialization
|
|
bme.setTemperatureOversampling(BME680_OS_8X);
|
|
bme.setHumidityOversampling(BME680_OS_2X);
|
|
bme.setPressureOversampling(BME680_OS_4X);
|
|
bme.setIIRFilterSize(BME680_FILTER_SIZE_3);
|
|
bme.setGasHeater(320, 150); // 320*C for 150 ms
|
|
}
|
|
|
|
void loop() {
|
|
if (! bme.performReading()) {
|
|
Serial.println("Failed to perform reading :(");
|
|
return;
|
|
}
|
|
Serial.print("Temperature = ");
|
|
Serial.print(bme.temperature);
|
|
Serial.println(" *C");
|
|
|
|
Serial.print("Pressure = ");
|
|
Serial.print(bme.pressure / 100.0);
|
|
Serial.println(" hPa");
|
|
|
|
Serial.print("Humidity = ");
|
|
Serial.print(bme.humidity);
|
|
Serial.println(" %");
|
|
|
|
Serial.print("Gas = ");
|
|
Serial.print(bme.gas_resistance / 1000.0);
|
|
Serial.println(" KOhms");
|
|
|
|
Serial.print("Approx. Altitude = ");
|
|
Serial.print(bme.readAltitude(SEALEVELPRESSURE_HPA));
|
|
Serial.println(" m");
|
|
|
|
Serial.println();
|
|
delay(2000);
|
|
} |