mirror of https://github.com/arendst/Tasmota.git
453 lines
17 KiB
C++
453 lines
17 KiB
C++
/*
|
|
xsns_50_paj7620.ino - gesture sensor support for Tasmota
|
|
|
|
Copyright (C) 2020 Theo Arends & Christian Baars
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
|
|
--------------------------------------------------------------------------------------------
|
|
Version Date Action Description
|
|
--------------------------------------------------------------------------------------------
|
|
|
|
|
|
---
|
|
1.0.0.0 20190808 started - further development by Christian Baars - https://github.com/Staars/Sonoff-Tasmota
|
|
forked - from arendst/tasmota - https://github.com/arendst/Tasmota
|
|
base - code base from arendst and - https://github.com/Seeed-Studio/Gesture_PAJ7620
|
|
|
|
*/
|
|
|
|
#ifdef USE_I2C
|
|
#ifdef USE_PAJ7620
|
|
/*********************************************************************************************\
|
|
* PAJ7620 - Gesture sensor
|
|
*
|
|
* I2C Address: 0x73 - standard address
|
|
\*********************************************************************************************/
|
|
|
|
#define XSNS_50 50
|
|
#define XI2C_34 34 // See I2CDEVICES.md
|
|
|
|
#define PAJ7620_ADDR 0x73 // standard address
|
|
|
|
#define PAJ7620_BANK_SEL 0xEF // 8 bit, write -> 0 or 1
|
|
|
|
// the registers are organized in 2 banks
|
|
// bank: 0
|
|
#define PAJ7620_GET_GESTURE 0x43 // 8 bit, read
|
|
#define PAJ7620_PROXIMITY_AVG_Y 0x6c // 8 bit, read -> 255: near , lower numbers: far
|
|
|
|
#define PAJ7620_OBJECT_CENTER_X 0xad // 5 bit, read
|
|
#define PAJ7620_OBJECT_CENTER_Y 0xaf // 5 bit, read
|
|
|
|
#define PAJ7620_DOWN 1 // readings from PAJ7620_GET_GESTURE
|
|
#define PAJ7620_UP 2
|
|
#define PAJ7620_RIGHT 4
|
|
#define PAJ7620_LEFT 8
|
|
#define PAJ7620_NEAR 16
|
|
#define PAJ7620_FAR 32
|
|
#define PAJ7620_CW 64
|
|
#define PAJ7620_CCW 128
|
|
|
|
// bank: 1
|
|
// nothing at the moment
|
|
|
|
const uint8_t PAJ7620initRegisterArray[][2] PROGMEM = { // set all needed registers
|
|
{0xEF,0x00}, // bank 0
|
|
{0x32,0x29}, {0x33,0x01}, {0x34,0x00}, {0x35,0x01}, {0x36,0x00}, {0x37,0x07}, {0x38,0x17}, {0x39,0x06},
|
|
{0x3A,0x12}, {0x3F,0x00}, {0x40,0x02}, {0x41,0xFF}, {0x42,0x01}, {0x46,0x2D}, {0x47,0x0F}, {0x48,0x3C},
|
|
{0x49,0x00}, {0x4A,0x1E}, {0x4B,0x00}, {0x4C,0x20}, {0x4D,0x00}, {0x4E,0x1A}, {0x4F,0x14}, {0x50,0x00},
|
|
{0x51,0x10}, {0x52,0x00}, {0x5C,0x02}, {0x5D,0x00}, {0x5E,0x10}, {0x5F,0x3F}, {0x60,0x27}, {0x61,0x28},
|
|
{0x62,0x00}, {0x63,0x03}, {0x64,0xF7}, {0x65,0x03}, {0x66,0xD9}, {0x67,0x03}, {0x68,0x01}, {0x69,0xC8},
|
|
{0x6A,0x40}, {0x6D,0x04}, {0x6E,0x00}, {0x6F,0x00}, {0x70,0x80}, {0x71,0x00}, {0x72,0x00}, {0x73,0x00},
|
|
{0x74,0xF0}, {0x75,0x00}, {0x80,0x42}, {0x81,0x44}, {0x82,0x04}, {0x83,0x20}, {0x84,0x20}, {0x85,0x00},
|
|
{0x86,0x10}, {0x87,0x00}, {0x88,0x05}, {0x89,0x18}, {0x8A,0x10}, {0x8B,0x01}, {0x8C,0x37}, {0x8D,0x00},
|
|
{0x8E,0xF0}, {0x8F,0x81}, {0x90,0x06}, {0x91,0x06}, {0x92,0x1E}, {0x93,0x0D}, {0x94,0x0A}, {0x95,0x0A},
|
|
{0x96,0x0C}, {0x97,0x05}, {0x98,0x0A}, {0x99,0x41}, {0x9A,0x14}, {0x9B,0x0A}, {0x9C,0x3F}, {0x9D,0x33},
|
|
{0x9E,0xAE}, {0x9F,0xF9}, {0xA0,0x48}, {0xA1,0x13}, {0xA2,0x10}, {0xA3,0x08}, {0xA4,0x30}, {0xA5,0x19},
|
|
{0xA6,0x10}, {0xA7,0x08}, {0xA8,0x24}, {0xA9,0x04}, {0xAA,0x1E}, {0xAB,0x1E}, {0xCC,0x19}, {0xCD,0x0B},
|
|
{0xCE,0x13}, {0xCF,0x64}, {0xD0,0x21}, {0xD1,0x0F}, {0xD2,0x88}, {0xE0,0x01}, {0xE1,0x04}, {0xE2,0x41},
|
|
{0xE3,0xD6}, {0xE4,0x00}, {0xE5,0x0C}, {0xE6,0x0A}, {0xE7,0x00}, {0xE8,0x00}, {0xE9,0x00}, {0xEE,0x07},
|
|
{0xEF,0x01}, // bank 1
|
|
{0x00,0x1E}, {0x01,0x1E}, {0x02,0x0F}, {0x03,0x10}, {0x04,0x02}, {0x05,0x00}, {0x06,0xB0}, {0x07,0x04},
|
|
{0x08,0x0D}, {0x09,0x0E}, {0x0A,0x9C}, {0x0B,0x04}, {0x0C,0x05}, {0x0D,0x0F}, {0x0E,0x02}, {0x0F,0x12},
|
|
{0x10,0x02}, {0x11,0x02}, {0x12,0x00}, {0x13,0x01}, {0x14,0x05}, {0x15,0x07}, {0x16,0x05}, {0x17,0x07},
|
|
{0x18,0x01}, {0x19,0x04}, {0x1A,0x05}, {0x1B,0x0C}, {0x1C,0x2A}, {0x1D,0x01}, {0x1E,0x00}, {0x21,0x00},
|
|
{0x22,0x00}, {0x23,0x00}, {0x25,0x01}, {0x26,0x00}, {0x27,0x39}, {0x28,0x7F}, {0x29,0x08}, {0x30,0x03},
|
|
{0x31,0x00}, {0x32,0x1A}, {0x33,0x1A}, {0x34,0x07}, {0x35,0x07}, {0x36,0x01}, {0x37,0xFF}, {0x38,0x36},
|
|
{0x39,0x07}, {0x3A,0x00}, {0x3E,0xFF}, {0x3F,0x00}, {0x40,0x77}, {0x41,0x40}, {0x42,0x00}, {0x43,0x30},
|
|
{0x44,0xA0}, {0x45,0x5C}, {0x46,0x00}, {0x47,0x00}, {0x48,0x58}, {0x4A,0x1E}, {0x4B,0x1E}, {0x4C,0x00},
|
|
{0x4D,0x00}, {0x4E,0xA0}, {0x4F,0x80}, {0x50,0x00}, {0x51,0x00}, {0x52,0x00}, {0x53,0x00}, {0x54,0x00},
|
|
{0x57,0x80}, {0x59,0x10}, {0x5A,0x08}, {0x5B,0x94}, {0x5C,0xE8}, {0x5D,0x08}, {0x5E,0x3D}, {0x5F,0x99},
|
|
{0x60,0x45}, {0x61,0x40}, {0x63,0x2D}, {0x64,0x02}, {0x65,0x96}, {0x66,0x00}, {0x67,0x97}, {0x68,0x01},
|
|
{0x69,0xCD}, {0x6A,0x01}, {0x6B,0xB0}, {0x6C,0x04}, {0x6D,0x2C}, {0x6E,0x01}, {0x6F,0x32}, {0x71,0x00},
|
|
{0x72,0x01}, {0x73,0x35}, {0x74,0x00}, {0x75,0x33}, {0x76,0x31}, {0x77,0x01}, {0x7C,0x84}, {0x7D,0x03},
|
|
{0x7E,0x01},
|
|
{0xEF,0x00} // back to bank 0
|
|
};
|
|
|
|
/*********************************************************************************************\
|
|
* constants
|
|
\*********************************************************************************************/
|
|
|
|
const char kPaj7620Directions[] PROGMEM = "Down|Up|Right|Left|Near|Far|CW|CCW";
|
|
|
|
const uint8_t PAJ7620_PIN[]= {1,2,3,4}; // TOP-SECRET!! ;)
|
|
|
|
/********************************************************************************************\
|
|
| *globals
|
|
\*********************************************************************************************/
|
|
|
|
char PAJ7620_name[] = "PAJ7620";
|
|
|
|
uint32_t PAJ7620_timeout_counter = 10; // the time interval is 100 ms -> i.e. 10 is 1 second (= start up interval)
|
|
uint32_t PAJ7620_next_job = 0; // 0 = detect, 1 = init, 2 = wait for gesture, 255 = sensor not found and do nothing
|
|
uint32_t PAJ7620_mode = 1; // 0 = mute, 1 = gestures only, 2 = gestures, 3 = corner, 4 = PIN, 5 = xy
|
|
|
|
struct {
|
|
uint8_t current;
|
|
uint8_t last;
|
|
uint8_t same; // number of identical gestures in a row - 255 should be enough
|
|
uint8_t unfinished; // used for up,down,left,right to avoid false interpretation for near and far
|
|
} PAJ7620_gesture;
|
|
|
|
bool PAJ7620_finished_gesture = false;
|
|
char PAJ7620_currentGestureName[6];
|
|
|
|
struct{
|
|
uint8_t x;
|
|
uint8_t y;
|
|
uint8_t last_x;
|
|
uint8_t last_y;
|
|
uint8_t proximity;
|
|
uint8_t last_proximity;
|
|
uint8_t corner;
|
|
struct { //TODO: multiple PIN's
|
|
uint8_t step:3; // max. 4 steps ATM, but leave a little more space
|
|
uint8_t countdown:3; // max. 0.7 seconds for each corner
|
|
uint8_t valid:1;
|
|
} PIN;
|
|
} PAJ7620_state;
|
|
|
|
/*********************************************************************************************\
|
|
* helper function
|
|
\*********************************************************************************************/
|
|
|
|
void PAJ7620SelectBank(uint8_t bank)
|
|
{
|
|
I2cWrite(PAJ7620_ADDR, PAJ7620_BANK_SEL, bank &1, 1);
|
|
}
|
|
|
|
/********************************************************************************************/
|
|
|
|
void PAJ7620DecodeGesture(void)
|
|
{
|
|
uint32_t index = 0;
|
|
switch (PAJ7620_gesture.current) { // We will accept only "clean" recognized gestures, the sensor can report multiple gestures at once via bitfield, but these are discarded
|
|
case PAJ7620_LEFT:
|
|
index++; // 3
|
|
case PAJ7620_RIGHT:
|
|
index++; // 2
|
|
case PAJ7620_UP:
|
|
index++; // 1
|
|
case PAJ7620_DOWN:
|
|
if (PAJ7620_gesture.unfinished) {
|
|
PAJ7620_finished_gesture = true;
|
|
break;
|
|
}
|
|
PAJ7620_gesture.unfinished = PAJ7620_gesture.current;
|
|
PAJ7620_timeout_counter = 5;
|
|
break;
|
|
case PAJ7620_NEAR:
|
|
index = 4;
|
|
PAJ7620_finished_gesture = true;
|
|
PAJ7620_timeout_counter = 25; // more time to "escape" from gesture (will be 2.8 second)
|
|
break;
|
|
case PAJ7620_FAR:
|
|
index = 5;
|
|
PAJ7620_finished_gesture = true;
|
|
PAJ7620_timeout_counter = 25;
|
|
break;
|
|
case PAJ7620_CW:
|
|
index = 6;
|
|
PAJ7620_finished_gesture = true;
|
|
break;
|
|
case PAJ7620_CCW:
|
|
index = 7;
|
|
PAJ7620_finished_gesture = true;
|
|
break;
|
|
default:
|
|
index = 8;
|
|
if (PAJ7620_gesture.unfinished) {
|
|
PAJ7620_finished_gesture = true; // this will finish up, down, left, right
|
|
}
|
|
break;
|
|
}
|
|
if (index < 8) {
|
|
GetTextIndexed(PAJ7620_currentGestureName, sizeof(PAJ7620_currentGestureName), index, kPaj7620Directions);
|
|
}
|
|
|
|
if (PAJ7620_finished_gesture) {
|
|
if (PAJ7620_gesture.unfinished) {
|
|
if ((PAJ7620_gesture.current != PAJ7620_NEAR) && (PAJ7620_gesture.current != PAJ7620_FAR)) {
|
|
PAJ7620_gesture.current = PAJ7620_gesture.unfinished; // to count correctly for up, down, right, left
|
|
}
|
|
}
|
|
if (PAJ7620_gesture.current == PAJ7620_gesture.last) {
|
|
PAJ7620_gesture.same++;
|
|
} else {
|
|
PAJ7620_gesture.same = 1;
|
|
}
|
|
PAJ7620_gesture.last = PAJ7620_gesture.current;
|
|
PAJ7620_finished_gesture = false;
|
|
PAJ7620_gesture.unfinished = 0;
|
|
PAJ7620_timeout_counter += 3; // add delay 0.3 seconds for every kind of gesture
|
|
MqttPublishSensor();
|
|
}
|
|
}
|
|
|
|
/********************************************************************************************/
|
|
|
|
void PAJ7620ReadGesture(void)
|
|
{
|
|
switch (PAJ7620_mode) {
|
|
case 1:
|
|
PAJ7620_gesture.current = I2cRead8(PAJ7620_ADDR,PAJ7620_GET_GESTURE);
|
|
if ((PAJ7620_gesture.current > 0) || PAJ7620_gesture.unfinished) {
|
|
DEBUG_SENSOR_LOG(PSTR("PAJ: gesture: %u"), PAJ7620_gesture.current);
|
|
PAJ7620DecodeGesture();
|
|
}
|
|
break;
|
|
case 2:
|
|
PAJ7620_state.proximity = I2cRead8(PAJ7620_ADDR, PAJ7620_PROXIMITY_AVG_Y);
|
|
if ((PAJ7620_state.proximity > 0) || (PAJ7620_state.last_proximity > 0)) {
|
|
if (PAJ7620_state.proximity != PAJ7620_state.last_proximity) {
|
|
PAJ7620_state.last_proximity = PAJ7620_state.proximity;
|
|
DEBUG_SENSOR_LOG(PSTR("PAJ: Proximity: %u"), PAJ7620_state.proximity);
|
|
MqttPublishSensor();
|
|
}
|
|
}
|
|
break;
|
|
case 3:
|
|
case 4:
|
|
case 5:
|
|
PAJ7620_state.x = I2cRead8(PAJ7620_ADDR, PAJ7620_OBJECT_CENTER_X);
|
|
PAJ7620_state.y = I2cRead8(PAJ7620_ADDR, PAJ7620_OBJECT_CENTER_Y);
|
|
if ((PAJ7620_state.y > 0) && (PAJ7620_state.x > 0)) {
|
|
if ((PAJ7620_state.y != PAJ7620_state.last_y) || (PAJ7620_state.x != PAJ7620_state.last_x)) {
|
|
PAJ7620_state.last_y = PAJ7620_state.y;
|
|
PAJ7620_state.last_x = PAJ7620_state.x;
|
|
DEBUG_SENSOR_LOG(PSTR("PAJ: x: %u y: %u"), PAJ7620_state.x, PAJ7620_state.y);
|
|
|
|
PAJ7620_state.corner = 0;
|
|
// 1|2
|
|
// ---
|
|
// 3|4
|
|
switch (PAJ7620_state.y) {
|
|
case 0: case 1: case 2: case 3: case 4: case 5:// case 0..5: would be nicer
|
|
PAJ7620_state.corner = 3;
|
|
break;
|
|
case 9: case 10: case 11: case 12: case 13: case 14:
|
|
PAJ7620_state.corner = 1;
|
|
break;
|
|
}
|
|
if (PAJ7620_state.corner != 0) {
|
|
switch (PAJ7620_state.x) {
|
|
case 0: case 1: case 2: case 3: case 4: case 5:
|
|
break;
|
|
case 9: case 10: case 11: case 12: case 13: case 14:
|
|
PAJ7620_state.corner++;
|
|
break;
|
|
default:
|
|
PAJ7620_state.corner = 0;
|
|
break;
|
|
}
|
|
}
|
|
DEBUG_SENSOR_LOG(PSTR("PAJ: corner: %u"), PAJ7620_state.corner);
|
|
// PIN-part:
|
|
if (PAJ7620_state.PIN.countdown == 0) {
|
|
PAJ7620_state.PIN.step = 0;
|
|
PAJ7620_state.PIN.valid = 0;
|
|
}
|
|
if (!PAJ7620_state.PIN.step) {
|
|
if (PAJ7620_state.corner == PAJ7620_PIN[PAJ7620_state.PIN.step]) {
|
|
PAJ7620_state.PIN.step = 1;
|
|
PAJ7620_state.PIN.countdown = 7;
|
|
}
|
|
} else {
|
|
if (PAJ7620_state.corner == PAJ7620_PIN[PAJ7620_state.PIN.step]) {
|
|
PAJ7620_state.PIN.step += 1;
|
|
PAJ7620_state.PIN.countdown = 7;
|
|
} else {
|
|
PAJ7620_state.PIN.countdown -= 1;
|
|
}
|
|
}
|
|
if (PAJ7620_state.PIN.step == 4) {
|
|
PAJ7620_state.PIN.valid = 1;
|
|
DEBUG_SENSOR_LOG(PSTR("PAJ: PIN valid!!"));
|
|
PAJ7620_state.PIN.countdown = 0; // will restart in the next loop
|
|
}
|
|
MqttPublishSensor();
|
|
}
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
/********************************************************************************************/
|
|
|
|
void PAJ7620Detect(void)
|
|
{
|
|
if (I2cActive(PAJ7620_ADDR)) { return; }
|
|
|
|
PAJ7620SelectBank(0);
|
|
PAJ7620SelectBank(0); // do it twice
|
|
uint16_t PAJ7620_id = I2cRead16LE(PAJ7620_ADDR,0); // read ID from reg 1 and 0
|
|
uint8_t PAJ7620_ver = I2cRead8(PAJ7620_ADDR,2);
|
|
if (0x7620 == PAJ7620_id) { // this device ID makes sense ;)
|
|
I2cSetActiveFound(PAJ7620_ADDR, PAJ7620_name);
|
|
AddLog_P2(LOG_LEVEL_DEBUG, PSTR("PAJ: ID: 0x%x and VER: %u"), PAJ7620_id, PAJ7620_ver);
|
|
PAJ7620_next_job = 1; // now init
|
|
}
|
|
else {
|
|
DEBUG_SENSOR_LOG(PSTR("PAJ: sensor not found, false ID 0x%x"), PAJ7620_id);
|
|
}
|
|
}
|
|
|
|
/********************************************************************************************/
|
|
|
|
void PAJ7620Init(void)
|
|
{
|
|
DEBUG_SENSOR_LOG(PSTR("PAJ: init sensor start %u"),millis());
|
|
union{
|
|
uint32_t raw;
|
|
uint8_t reg_val[4];
|
|
} buf;
|
|
|
|
for (uint32_t i = 0; i < (sizeof(PAJ7620initRegisterArray) / 2); i += 2)
|
|
{
|
|
buf.raw = pgm_read_dword(PAJ7620initRegisterArray + i);
|
|
DEBUG_SENSOR_LOG("PAJ: %x %x %x %x",buf.reg_val[0],buf.reg_val[1],buf.reg_val[2],buf.reg_val[3]);
|
|
I2cWrite(PAJ7620_ADDR, buf.reg_val[0], buf.reg_val[1], 1);
|
|
I2cWrite(PAJ7620_ADDR, buf.reg_val[2], buf.reg_val[3], 1);
|
|
}
|
|
DEBUG_SENSOR_LOG(PSTR("PAJ: init sensor done %u"),millis());
|
|
PAJ7620_next_job = 2; // now loop and wait for gestures
|
|
}
|
|
|
|
/********************************************************************************************/
|
|
|
|
void PAJ7620Loop(void)
|
|
{
|
|
if (0 == PAJ7620_timeout_counter) {
|
|
switch (PAJ7620_next_job) {
|
|
case 1:
|
|
PAJ7620Init();
|
|
break;
|
|
case 2:
|
|
if (PAJ7620_mode != 0) {
|
|
PAJ7620ReadGesture();
|
|
}
|
|
break;
|
|
}
|
|
} else {
|
|
PAJ7620_timeout_counter--;
|
|
}
|
|
}
|
|
|
|
/********************************************************************************************/
|
|
|
|
void PAJ7620Show(bool json)
|
|
{
|
|
if (json) {
|
|
if (PAJ7620_currentGestureName[0] != '\0' ) {
|
|
ResponseAppend_P(PSTR(",\"%s\":{\"%s\":%u}"), PAJ7620_name, PAJ7620_currentGestureName, PAJ7620_gesture.same);
|
|
PAJ7620_currentGestureName[0] = '\0';
|
|
return;
|
|
}
|
|
switch (PAJ7620_mode) {
|
|
case 2:
|
|
ResponseAppend_P(PSTR(",\"%s\":{\"Proximity\":%u}"), PAJ7620_name, PAJ7620_state.proximity);
|
|
break;
|
|
case 3:
|
|
if (PAJ7620_state.corner > 0) {
|
|
ResponseAppend_P(PSTR(",\"%s\":{\"Corner\":%u}"), PAJ7620_name, PAJ7620_state.corner);
|
|
}
|
|
break;
|
|
case 4:
|
|
if (PAJ7620_state.PIN.valid) {
|
|
ResponseAppend_P(PSTR(",\"%s\":{\"PIN\":%u}"), PAJ7620_name, 1); //TODO: more than one PIN
|
|
PAJ7620_state.PIN.valid = 0;
|
|
}
|
|
break;
|
|
case 5:
|
|
ResponseAppend_P(PSTR(",\"%s\":{\"x\":%u,\"y\":%u}"), PAJ7620_name, PAJ7620_state.x, PAJ7620_state.y);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/*********************************************************************************************\
|
|
* Command Sensor50
|
|
*
|
|
* 1 - Gesture mode
|
|
* 2 - Proximity mode
|
|
* 3 - Corner mode
|
|
* 4 - PIN mode
|
|
* 5 - X/Y mode
|
|
\*********************************************************************************************/
|
|
|
|
bool PAJ7620CommandSensor(void)
|
|
{
|
|
if ((XdrvMailbox.payload >= 0) && (XdrvMailbox.payload <= 5)) {
|
|
PAJ7620_mode = XdrvMailbox.payload;
|
|
}
|
|
Response_P(S_JSON_SENSOR_INDEX_NVALUE, XSNS_50, PAJ7620_mode);
|
|
|
|
return true;
|
|
}
|
|
|
|
/*********************************************************************************************\
|
|
* Interface
|
|
\*********************************************************************************************/
|
|
|
|
bool Xsns50(uint8_t function)
|
|
{
|
|
if (!I2cEnabled(XI2C_34)) { return false; }
|
|
|
|
bool result = false;
|
|
|
|
if (FUNC_INIT == function) {
|
|
PAJ7620Detect();
|
|
}
|
|
else if (PAJ7620_next_job) {
|
|
switch (function) {
|
|
case FUNC_COMMAND_SENSOR:
|
|
if (XSNS_50 == XdrvMailbox.index){
|
|
result = PAJ7620CommandSensor();
|
|
}
|
|
break;
|
|
case FUNC_EVERY_100_MSECOND:
|
|
PAJ7620Loop();
|
|
break;
|
|
case FUNC_JSON_APPEND:
|
|
PAJ7620Show(1);
|
|
break;
|
|
}
|
|
}
|
|
return result;
|
|
}
|
|
|
|
#endif // USE_PAJ7620
|
|
#endif // USE_I2C
|