mirror of https://github.com/arendst/Tasmota.git
357 lines
11 KiB
C++
357 lines
11 KiB
C++
/*
|
||
xnrg_22_bl6523.ino - BL6523 based Watt hour meter support for Tasmota
|
||
|
||
Copyright (C) 2022 Jeevas Vasudevan
|
||
|
||
This program is free software: you can redistribute it and/or modify
|
||
it under the terms of the GNU General Public License as published by
|
||
the Free Software Foundation, either version 3 of the License, or
|
||
(at your option) any later version.
|
||
|
||
This program is distributed in the hope that it will be useful,
|
||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
GNU General Public License for more details.
|
||
|
||
You should have received a copy of the GNU General Public License
|
||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||
*/
|
||
|
||
#ifdef USE_ENERGY_SENSOR
|
||
#ifdef USE_BL6523
|
||
/*********************************************************************************************\
|
||
* Chinese BL6523 based Watt hour meter
|
||
*
|
||
* This meter provides accurate Voltage, Frequency, Ampere, Wattage, Power Factor, KWh
|
||
* To use Tasmota the user needs to add an ESP8266 or ESP32
|
||
* Three lines need to be connected via 1KOhh resistors to ESP from the main board(RX,TX GND)
|
||
*
|
||
* Connection Eg (ESP8266) - Non - Isolated:
|
||
* BL6523 RX ->1KOhm-> ESP IO4(D2) (Should be Input Capable)
|
||
* BL6523 TX ->1KOhm-> ESP IO5(D1) (Should be Input Capable)
|
||
* BL6523 GND -> ESP GND
|
||
*
|
||
* Connection Eg (ESP32) - Non - Isolated:
|
||
* BL6523 RX ->1KOhm-> ESP IO4 (Should be Input Capable)
|
||
* BL6523 TX ->1KOhm-> ESP IO5 (Should be Input Capable)
|
||
* BL6523 GND -> ESP GND
|
||
*
|
||
* To build add the below to user_config_override.h
|
||
* #define USE_ENERGY_SENSOR // Enable Energy sensor framework
|
||
* #define USE_BL6523 // Add support for Chinese BL6523 based Watt hour meter (+1k code)¸
|
||
*
|
||
* After Installation use the below template sample:
|
||
* {"NAME":"BL6523 Smart Meter","GPIO":[0,0,0,0,7488,7520,0,0,0,0,0,0,0,0],"FLAG":0,"BASE":18}
|
||
\*********************************************************************************************/
|
||
|
||
#define XNRG_22 22
|
||
|
||
#include <TasmotaSerial.h>
|
||
|
||
#define BL6523_RX_DATASET_SIZE 2
|
||
#define BL6523_TX_DATASET_SIZE 4
|
||
|
||
#define BL6523_BAUD 4800
|
||
#define BL6523_REG_AMPS 0x05
|
||
#define BL6523_REG_VOLTS 0x07
|
||
#define BL6523_REG_FREQ 0x09
|
||
#define BL6523_REG_WATTS 0x0A
|
||
#define BL6523_REG_POWF 0x08
|
||
#define BL6523_REG_WATTHR 0x0C
|
||
|
||
#define SINGLE_PHASE 0
|
||
#define RX_WAIT 100
|
||
|
||
#define BL6523_IREF 297899
|
||
#define BL6523_UREF 13304
|
||
#define BL6523_FREF 3907
|
||
#define BL6523_PREF 707
|
||
#define BL6523_PWHRREF_D 33 // Substract this from BL6523_PREF to get WattHr Div.
|
||
|
||
TasmotaSerial *Bl6523RxSerial;
|
||
TasmotaSerial *Bl6523TxSerial;
|
||
|
||
struct BL6523
|
||
{
|
||
uint8_t type = 1;
|
||
uint8_t valid = 0;
|
||
uint8_t got_data_stone = 0;
|
||
bool discovery_triggered = false;
|
||
} Bl6523;
|
||
|
||
bool Bl6523ReadData(void)
|
||
{
|
||
uint32_t powf_word = 0, powf_buf = 0, i = 0;
|
||
float powf = 0.0f;
|
||
|
||
if (!Bl6523RxSerial->available())
|
||
{
|
||
AddLog(LOG_LEVEL_DEBUG, PSTR("BL6:No Rx Data available" ));
|
||
return false;
|
||
}
|
||
|
||
while ((Bl6523RxSerial->peek() != 0x35) && Bl6523RxSerial->available())
|
||
{
|
||
Bl6523RxSerial->read();
|
||
}
|
||
|
||
if (Bl6523RxSerial->available() < BL6523_RX_DATASET_SIZE)
|
||
{
|
||
AddLog(LOG_LEVEL_DEBUG, PSTR("BL6:Rx less than expected" ));
|
||
return false;
|
||
}
|
||
|
||
uint8_t rx_buffer[BL6523_RX_DATASET_SIZE];
|
||
Bl6523RxSerial->readBytes(rx_buffer, BL6523_RX_DATASET_SIZE);
|
||
Bl6523RxSerial->flush(); // Make room for another burst
|
||
|
||
AddLogBuffer(LOG_LEVEL_DEBUG_MORE, rx_buffer, BL6523_RX_DATASET_SIZE);
|
||
|
||
i=0;
|
||
while (Bl6523TxSerial->available() < BL6523_TX_DATASET_SIZE)
|
||
{
|
||
// sleep till TX buffer is full
|
||
delay(10);
|
||
if ( i++ > RX_WAIT ){
|
||
break;
|
||
}
|
||
}
|
||
|
||
|
||
uint8_t tx_buffer[BL6523_TX_DATASET_SIZE];
|
||
Bl6523TxSerial->readBytes(tx_buffer, BL6523_TX_DATASET_SIZE);
|
||
Bl6523TxSerial->flush(); // Make room for another burst
|
||
|
||
|
||
AddLogBuffer(LOG_LEVEL_DEBUG_MORE, tx_buffer, BL6523_TX_DATASET_SIZE);
|
||
|
||
/* Checksum: （Addr+Data_L+Data_M+Data_H） & 0xFF, then byte invert */
|
||
uint8_t crc = rx_buffer[1]; //Addr
|
||
for (uint32_t i = 0; i < (BL6523_TX_DATASET_SIZE - 1); i++)
|
||
{
|
||
crc += tx_buffer[i]; //Add Data_L,Data_M and Data_H to Addr
|
||
}
|
||
crc &= 0xff; // Bitwise AND 0xFF
|
||
crc = ~crc; // Invert the byte
|
||
if (crc != tx_buffer[BL6523_TX_DATASET_SIZE - 1])
|
||
{
|
||
AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("BL6:" D_CHECKSUM_FAILURE));
|
||
Bl6523TxSerial->flush();
|
||
Bl6523RxSerial->flush();
|
||
return false;
|
||
}
|
||
|
||
/* WRITE DATA (format: command(write->0xCA) address data_low data_mid data_high checksum )
|
||
WRITE Sample(RX):
|
||
RX: CA 3E 55 00 00 6C (WRPROT - allow)
|
||
RX: CA 14 00 00 10 DB (MODE)
|
||
RX: CA 15 04 00 00 E6 (GAIN - IB 16x gain )
|
||
RX: CA 19 08 00 00 DE (WA_CFDIV )
|
||
RX: CA 3E AA 00 00 17 (WRPROT - disable)
|
||
*/
|
||
|
||
/* READ DATA (format: command(read->0x35) address data_low data_mid data_high checksum )
|
||
READ Sample(RX-TX) Data:
|
||
RX: 35 05 TX: E4 00 00 16 (IA rms )
|
||
RX: 35 07 TX: D5 A3 2E 52 (V rms )
|
||
RX: 35 09 TX: F0 FB 02 09 (FREQ)
|
||
RX: 35 0A TX: 00 00 00 F5 (WATT)
|
||
RX: 35 08 TX: 00 00 00 F7 (PF)
|
||
RX: 35 0C TX: 00 00 00 F3 (WATT_HR)
|
||
*/
|
||
|
||
switch(rx_buffer[1]) {
|
||
case BL6523_REG_AMPS :
|
||
Energy.current[SINGLE_PHASE] = (float)((tx_buffer[2] << 16) | (tx_buffer[1] << 8) | tx_buffer[0]) / Settings->energy_current_calibration; // 1.260 A
|
||
break;
|
||
case BL6523_REG_VOLTS :
|
||
Energy.voltage[SINGLE_PHASE] = (float)((tx_buffer[2] << 16) | (tx_buffer[1] << 8) | tx_buffer[0]) / Settings->energy_voltage_calibration; // 230.2 V
|
||
break;
|
||
case BL6523_REG_FREQ :
|
||
Energy.frequency[SINGLE_PHASE] = (float)((tx_buffer[2] << 16) | (tx_buffer[1] << 8) | tx_buffer[0]) / Settings->energy_frequency_calibration; // 50.0 Hz
|
||
break;
|
||
case BL6523_REG_WATTS :
|
||
Energy.active_power[SINGLE_PHASE] = (float)((tx_buffer[2] << 16) | (tx_buffer[1] << 8) | tx_buffer[0]) / Settings->energy_power_calibration; // -196.3 W
|
||
break;
|
||
case BL6523_REG_POWF :
|
||
/* Power factor =(sign bit)*((PF[22]×2^－1）＋（PF[21]×2^－2）＋。。。)
|
||
Eg., reg value 0x7FFFFF(HEX) -> PF 1, 0x800000(HEX) -> -1, 0x400000(HEX) -> 0.5
|
||
*/
|
||
powf = 0.0f;
|
||
powf_buf = ((tx_buffer[2] << 16) | (tx_buffer[1] << 8) | tx_buffer[0]);
|
||
powf_word = (powf_buf >> 23) ? ~(powf_buf & 0x7fffff) : powf_buf & 0x7fffff; //Extract the 23 bits and invert if sign bit(24) is set
|
||
for (int i = 0; i < 23; i++){ // Accumulate powf from 23 bits
|
||
powf += ((powf_word >> (22-i)) * pow(2,(0-(i+1))));
|
||
powf_word = powf_word & (0x7fffff >> (1+i));
|
||
}
|
||
powf = (powf_buf >> 23) ? (0.0f - (powf)) : powf; // Negate if sign bit(24) is set
|
||
Energy.power_factor[SINGLE_PHASE] = powf;
|
||
break;
|
||
case BL6523_REG_WATTHR :
|
||
Energy.import_active[SINGLE_PHASE] = (float)((tx_buffer[2] << 16) | (tx_buffer[1] << 8) | tx_buffer[0]) / ( Settings->energy_power_calibration - BL6523_PWHRREF_D ); // 6.216 kWh => used in EnergyUpdateTotal()
|
||
break;
|
||
default :
|
||
break;
|
||
}
|
||
Energy.data_valid[SINGLE_PHASE] = 0;
|
||
EnergyUpdateTotal();
|
||
if (!Bl6523.discovery_triggered)
|
||
{
|
||
TasmotaGlobal.discovery_counter = 1; // force TasDiscovery()
|
||
Bl6523.discovery_triggered = true;
|
||
}
|
||
return true;
|
||
|
||
}
|
||
|
||
/*********************************************************************************************/
|
||
|
||
void Bl6523Update(void)
|
||
{ // Every 250 millisecond
|
||
if (Bl6523ReadData())
|
||
{
|
||
Bl6523.valid = 60;
|
||
}
|
||
else
|
||
{
|
||
if (Bl6523.valid) {
|
||
Bl6523.valid--;
|
||
}
|
||
}
|
||
}
|
||
|
||
/*********************************************************************************************/
|
||
|
||
void Bl6523Init(void)
|
||
{
|
||
|
||
Bl6523.type = 0;
|
||
Bl6523RxSerial = new TasmotaSerial(Pin(GPIO_BL6523_RX), -1, 1);
|
||
Bl6523TxSerial = new TasmotaSerial(Pin(GPIO_BL6523_TX), -1, 1);
|
||
if ((Bl6523RxSerial->begin(BL6523_BAUD)) && (Bl6523TxSerial->begin(BL6523_BAUD)))
|
||
{
|
||
if (Bl6523RxSerial->hardwareSerial())
|
||
{
|
||
ClaimSerial();
|
||
}
|
||
if (Bl6523TxSerial->hardwareSerial())
|
||
{
|
||
ClaimSerial();
|
||
}
|
||
Bl6523.type = 1;
|
||
Energy.phase_count = 1;
|
||
AddLog(LOG_LEVEL_DEBUG, PSTR("BL6:Init Success" ));
|
||
}
|
||
else
|
||
{
|
||
AddLog(LOG_LEVEL_DEBUG, PSTR("BL6:Init Failure!" ));
|
||
TasmotaGlobal.energy_driver = ENERGY_NONE;
|
||
}
|
||
|
||
}
|
||
|
||
bool Bl6523Command(void) {
|
||
bool serviced = true;
|
||
|
||
int32_t value = (int32_t)(CharToFloat(XdrvMailbox.data) * 1000); // 1.234 = 1234, -1.234 = -1234
|
||
uint32_t abs_value = abs(value) / 10; // 1.23 = 123, -1.23 = 123
|
||
|
||
if ((CMND_POWERCAL == Energy.command_code) || (CMND_VOLTAGECAL == Energy.command_code) || (CMND_CURRENTCAL == Energy.command_code)) {
|
||
// Service in xdrv_03_energy.ino
|
||
}
|
||
else if (CMND_POWERSET == Energy.command_code) {
|
||
if (XdrvMailbox.data_len) {
|
||
if ((abs_value > 100) && (abs_value < 200000)) { // Between 1.00 and 2000.00 W
|
||
Settings->energy_power_calibration = abs_value;
|
||
}
|
||
}
|
||
}
|
||
else if (CMND_VOLTAGESET == Energy.command_code) {
|
||
if (XdrvMailbox.data_len) {
|
||
if ((abs_value > 10000) && (abs_value < 26000)) { // Between 100.00 and 260.00 V
|
||
Settings->energy_voltage_calibration = abs_value;
|
||
}
|
||
}
|
||
}
|
||
else if (CMND_CURRENTSET == Energy.command_code) {
|
||
if (XdrvMailbox.data_len) {
|
||
if ((abs_value > 1000) && (abs_value < 1000000)) { // Between 10.00 mA and 10.00000 A
|
||
Settings->energy_current_calibration = abs_value;
|
||
}
|
||
}
|
||
}
|
||
else if (CMND_FREQUENCYSET == Energy.command_code) {
|
||
if (XdrvMailbox.data_len) {
|
||
if ((abs_value > 4500) && (abs_value < 6500)) { // Between 45.00 and 65.00 Hz
|
||
Settings->energy_frequency_calibration = abs_value;
|
||
}
|
||
}
|
||
}
|
||
else if (CMND_ENERGYCONFIG == Energy.command_code) {
|
||
AddLog(LOG_LEVEL_DEBUG, PSTR("NRG: Config index %d, payload %d, value %d, data '%s'"),
|
||
XdrvMailbox.index, XdrvMailbox.payload, value, XdrvMailbox.data ? XdrvMailbox.data : "null" );
|
||
|
||
// EnergyConfig1 to 3 = Set Energy.current[channel] in A like 0.417 for 417mA
|
||
if ((XdrvMailbox.index > 0) && (XdrvMailbox.index < 4)) {
|
||
//Bl6523.current[XdrvMailbox.index -1] = value;
|
||
}
|
||
// EnergyConfig4 to 6 = Set Energy.active_power[channel] in W like 100 for 100W
|
||
if ((XdrvMailbox.index > 3) && (XdrvMailbox.index < 7)) {
|
||
//Bl6523.power[XdrvMailbox.index -4] = value;
|
||
}
|
||
}
|
||
else serviced = false; // Unknown command
|
||
|
||
return serviced;
|
||
}
|
||
|
||
void Bl6523DrvInit(void)
|
||
{
|
||
if (PinUsed(GPIO_BL6523_RX) && PinUsed(GPIO_BL6523_TX)) {
|
||
AddLog(LOG_LEVEL_DEBUG, PSTR("BL6:PreInit Success" ));
|
||
TasmotaGlobal.energy_driver = XNRG_22;
|
||
if (HLW_PREF_PULSE == Settings->energy_power_calibration) {
|
||
Settings->energy_frequency_calibration = BL6523_FREF;
|
||
Settings->energy_voltage_calibration = BL6523_UREF;
|
||
Settings->energy_current_calibration = BL6523_IREF;
|
||
Settings->energy_power_calibration = BL6523_PREF;
|
||
}
|
||
|
||
}
|
||
else
|
||
{
|
||
AddLog(LOG_LEVEL_DEBUG, PSTR("BL6:PreInit Failure!" ));
|
||
TasmotaGlobal.energy_driver = ENERGY_NONE;
|
||
}
|
||
|
||
}
|
||
|
||
/*********************************************************************************************\
|
||
* Interface
|
||
\*********************************************************************************************/
|
||
|
||
bool Xnrg22(uint8_t function)
|
||
{
|
||
bool result = false;
|
||
|
||
switch (function)
|
||
{
|
||
case FUNC_EVERY_250_MSECOND:
|
||
Bl6523Update();
|
||
break;
|
||
case FUNC_COMMAND:
|
||
result = Bl6523Command();
|
||
break;
|
||
case FUNC_INIT:
|
||
Bl6523Init();
|
||
break;
|
||
case FUNC_PRE_INIT:
|
||
Bl6523DrvInit();
|
||
break;
|
||
}
|
||
|
||
return result;
|
||
}
|
||
|
||
#endif // USE_BL6523
|
||
#endif // USE_ENERGY_SENSOR
|