Tasmota/tasmota/settings.h

875 lines
48 KiB
C

/*
settings.h - setting variables for Tasmota
Copyright (C) 2021 Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _SETTINGS_H_
#define _SETTINGS_H_
const uint8_t PARAM8_SIZE = 18; // Number of param bytes (SetOption)
// Bitfield to be used for any SetOption0 .. SetOption31 persistent single bit
typedef union { // Restricted by MISRA-C Rule 18.4 but so useful...
uint32_t data; // Allow bit manipulation using SetOption
struct { // SetOption0 .. SetOption31
uint32_t save_state : 1; // bit 0 - SetOption0 - (Settings) Save power state (1) and use after restart
uint32_t button_restrict : 1; // bit 1 - SetOption1 - (Button) Control button single press (1) or multipress (0)
uint32_t mqtt_add_global_info : 1; // bit 2 - SetOption2 - (MQTT) Add global temperature/humidity/pressure info to JSON sensor message
uint32_t mqtt_enabled : 1; // bit 3 - SetOption3 - (MQTT) Enable (1)
uint32_t mqtt_response : 1; // bit 4 - SetOption4 - (MQTT) Switch between RESULT (0) or COMMAND (1)
uint32_t mqtt_power_retain : 1; // bit 5 - CMND_POWERRETAIN
uint32_t mqtt_button_retain : 1; // bit 6 - CMND_BUTTONRETAIN
uint32_t mqtt_switch_retain : 1; // bit 7 - CMND_SWITCHRETAIN
uint32_t temperature_conversion : 1; // bit 8 - SetOption8 - (Temperature) Switch between Celsius (0) or Fahrenheit (1)
uint32_t mqtt_sensor_retain : 1; // bit 9 - CMND_SENSORRETAIN
uint32_t mqtt_offline : 1; // bit 10 - SetOption10 - (MQTT) Control LWT message format, Offline (1) or none (0)
uint32_t button_swap : 1; // bit 11 (v5.1.6) - SetOption11 - (Button) Swap (1) button single and double press functionality
uint32_t stop_flash_rotate : 1; // bit 12 (v5.2.0) - SetOption12 - (Settings) Switch between dynamic (0) or fixed (1) slot flash save location
uint32_t button_single : 1; // bit 13 (v5.4.0) - SetOption13 - (Button) Support only single press (1) to speed up button press recognition
uint32_t interlock : 1; // bit 14 (v5.6.0) - CMND_INTERLOCK - Enable (1) /disable (0) interlock
uint32_t pwm_control : 1; // bit 15 (v5.8.1) - SetOption15 - (Light) Switch between commands PWM (1) or COLOR/DIMMER/CT/CHANNEL (0)
uint32_t ws_clock_reverse : 1; // bit 16 (v5.8.1) - SetOption16 - (WS2812) Switch between clockwise (0) or counter-clockwise (1)
uint32_t decimal_text : 1; // bit 17 (v5.8.1) - SetOption17 - (Light) Switch between decimal (1) or hexadecimal (0) output
uint32_t light_signal : 1; // bit 18 (v5.10.0c) - SetOption18 - (Light) Pair light signal (1) with CO2 sensor
uint32_t hass_discovery : 1; // bit 19 (v5.11.1a) - SetOption19 - (HAss) Control automatic discovery (1) (See SetOption59)
uint32_t not_power_linked : 1; // bit 20 (v5.11.1f) - SetOption20 - (Light) Control power in relation to Dimmer/Color/Ct changes (1)
uint32_t no_power_on_check : 1; // bit 21 (v5.11.1i) - SetOption21 - (Energy) Show voltage even if powered off (1)
uint32_t mqtt_serial : 1; // bit 22 (v5.12.0f) - CMND_SERIALSEND and CMND_SERIALLOG
uint32_t mqtt_serial_raw : 1; // bit 23 (v6.1.1c) - CMND_SERIALSEND3
uint32_t pressure_conversion : 1; // bit 24 (v6.3.0.2) - SetOption24 - (Pressure) switch between hPa (0)or mmHg (1) unit
uint32_t knx_enabled : 1; // bit 25 (v5.12.0l) - CMND_KNX_ENABLED
uint32_t device_index_enable : 1; // bit 26 (v5.13.1a) - SetOption26 - (MQTT, HAss) Switch between POWER (0) or POWER1 (1)
uint32_t knx_enable_enhancement : 1; // bit 27 (v5.14.0a) - CMND_KNX_ENHANCED
uint32_t rf_receive_decimal : 1; // bit 28 (v6.0.0a) - SetOption28 - (RF) Receive data format hexadecimal (0) or decimal (1)
uint32_t ir_receive_decimal : 1; // bit 29 (v6.0.0a) - SetOption29 - (IR) Receive data format hexadecimal (0) or decimal (1)
uint32_t hass_light : 1; // bit 30 (v6.0.0b) - SetOption30 - (HAss) enforce autodiscovery as light (1)
uint32_t global_state : 1; // bit 31 (v6.1.0) - SetOption31 - (Wifi, MQTT) Control link led blinking (1)
};
} SOBitfield;
// Bitfield to be used for any SetOption50 .. SetOption81 persistent single bit
typedef union { // Restricted by MISRA-C Rule 18.4 but so useful...
uint32_t data; // Allow bit manipulation using SetOption
struct { // SetOption50 .. SetOption81
uint32_t timers_enable : 1; // bit 0 (v6.1.1b) - CMND_TIMERS
uint32_t user_esp8285_enable : 1; // bit 1 (v6.1.1.14) - SetOption51 - (GPIO) Enable ESP8285 user GPIO's (1)
uint32_t time_append_timezone : 1; // bit 2 (v6.2.1.2) - SetOption52 - (Time) Append timezone to JSON time (1)
uint32_t gui_hostname_ip : 1; // bit 3 (v6.2.1.20) - SetOption53 - (GUI) Show hostname and IP address in GUI main menu (1)
uint32_t tuya_apply_o20 : 1; // bit 4 (v6.3.0.4) - SetOption54 - (Tuya) Apply SetOption20 settings to Tuya device (1)
uint32_t mdns_enabled : 1; // bit 5 (v6.4.1.4) - SetOption55 - (mDNS) Service on (1) or off (0)
uint32_t use_wifi_scan : 1; // bit 6 (v6.3.0.10) - SetOption56 - (Wifi) Scan network at restart for configured AP's (1) or used stored AP (0)
uint32_t use_wifi_rescan : 1; // bit 7 (v6.3.0.10) - SetOption57 - (Wifi) Scan network every 44 minutes for configured AP's (1)
uint32_t receive_raw : 1; // bit 8 (v6.3.0.11) - SetOption58 - (IR) Add IR Raw data to JSON message (1)
uint32_t hass_tele_on_power : 1; // bit 9 (v6.3.0.13) - SetOption59 - (MQTT) Send tele/%topic%/STATE in addition to stat/%topic%/RESULT (1)
uint32_t sleep_normal : 1; // bit 10 (v6.3.0.15) - SetOption60 - (Sleep) Enable normal sleep (1) instead of dynamic sleep (0)
uint32_t button_switch_force_local : 1;// bit 11 (v6.3.0.16) - SetOption61 - (Button, Switch) Force local operation (1) when button/switch topic is set
uint32_t no_hold_retain : 1; // bit 12 (v6.4.1.19) - SetOption62 - (MQTT) Don't use retain flag on HOLD messages (1)
uint32_t no_power_feedback : 1; // bit 13 (v6.5.0.9) - SetOption63 - (Power) Don't scan relay power state at restart (1)
uint32_t use_underscore : 1; // bit 14 (v6.5.0.12) - SetOption64 - (JSON) Enable "_" (1) instead of "-" (0) as sensor index separator
uint32_t fast_power_cycle_disable : 1; // bit 15 (v6.6.0.20) - SetOption65 - (QPC) Disable (1) fast power cycle detection for device reset
uint32_t tuya_serial_mqtt_publish : 1; // bit 16 (v6.6.0.21) - SetOption66 - (Tuya) Enable (1) TuyaMcuReceived messages over Mqtt
uint32_t buzzer_enable : 1; // bit 17 (v6.6.0.1) - SetOption67 - (Buzzer) Enable (1) buzzer when available
uint32_t pwm_multi_channels : 1; // bit 18 (v6.6.0.3) - SetOption68 - (Light) Enable multi-channels PWM (1) instead of Color PWM (0)
uint32_t ex_tuya_dimmer_min_limit : 1; // bit 19 (v6.6.0.5) - SetOption69 - (not used) Limits Tuya dimmers to minimum of 10% (25) when enabled
uint32_t energy_weekend : 1; // bit 20 (v6.6.0.8) - CMND_TARIFF
uint32_t dds2382_model : 1; // bit 21 (v6.6.0.14) - SetOption71 - (DDS2382) Select different Modbus registers (1) for Active Energy (#6531)
uint32_t hardware_energy_total : 1; // bit 22 (v6.6.0.15) - SetOption72 - (Energy) Enable (1) hardware energy total counter as reference (#6561)
uint32_t mqtt_buttons : 1; // bit 23 (v8.2.0.3) - SetOption73 - (Button) Detach buttons from relays (1) and enable MQTT action state for multipress
uint32_t ds18x20_internal_pullup : 1; // bit 24 (v7.0.0.1) - SetOption74 - (DS18x20) Enable internal pullup (1) for single DS18x20 sensor
uint32_t grouptopic_mode : 1; // bit 25 (v7.0.0.1) - SetOption75 - (MQTT) GroupTopic replaces %topic% (0) or fixed topic cmnd/grouptopic (1)
uint32_t bootcount_update : 1; // bit 26 (v7.0.0.4) - SetOption76 - (Deepsleep) Enable incrementing bootcount (1) when deepsleep is enabled
uint32_t slider_dimmer_stay_on : 1; // bit 27 (v7.0.0.6) - SetOption77 - (Light) Do not power off (1) if slider moved to far left
uint32_t ex_compatibility_check : 1; // bit 28 (v7.1.2.6) - SetOption78 - (not used) Disable OTA compatibility check
uint32_t counter_reset_on_tele : 1; // bit 29 (v8.1.0.1) - SetOption79 - (Counter) Enable resetting of counters (1) after telemetry was sent
uint32_t shutter_mode : 1; // bit 30 (v6.6.0.14) - SetOption80 - (Shutter) Enable shutter support (1)
uint32_t pcf8574_ports_inverted : 1; // bit 31 (v6.6.0.14) - SetOption81 - (PCF8574) Invert all ports on PCF8574 devices (1)
};
} SOBitfield3;
// Bitfield to be used for any SetOption82 .. SetOption113 persistent single bit
typedef union { // Restricted by MISRA-C Rule 18.4 but so useful...
uint32_t data; // Allow bit manipulation using SetOption
struct { // SetOption82 .. SetOption113
uint32_t alexa_ct_range : 1; // bit 0 (v8.1.0.2) - SetOption82 - (Alexa) Reduced CT range for Alexa (1)
uint32_t zigbee_use_names : 1; // bit 1 (v8.1.0.4) - SetOption83 - (Zigbee) Use FriendlyNames (1) instead of ShortAddresses (0) when possible
uint32_t awsiot_shadow : 1; // bit 2 (v8.1.0.5) - SetOption84 - (AWS IoT) publish MQTT state to a device shadow (1)
uint32_t device_groups_enabled : 1; // bit 3 (v8.1.0.9) - SetOption85 - (DevGroups) Enable Device Groups (1)
uint32_t led_timeout : 1; // bit 4 (v8.1.0.9) - SetOption86 - (PWM Dimmer) Turn brightness LED's off (1) 5 seconds after last change
uint32_t powered_off_led : 1; // bit 5 (v8.1.0.9) - SetOption87 - (PWM Dimmer) Turn red LED on (1) when powered off
uint32_t multiple_device_groups : 1; // bit 6 (v8.1.0.9) - SetOption88 - (DevGroups) Enable relays in separate device groups/PWM Dimmer Buttons control remote devices (1)
uint32_t zigbee_distinct_topics : 1; // bit 7 (v8.1.0.10) - SetOption89 - (MQTT, Zigbee) Distinct MQTT topics per device for Zigbee (1) (#7835)
uint32_t only_json_message : 1; // bit 8 (v8.2.0.3) - SetOption90 - (MQTT) Disable non-json MQTT response (1)
uint32_t fade_at_startup : 1; // bit 9 (v8.2.0.3) - SetOption91 - (Light) Enable light fading at start/power on (1)
uint32_t pwm_ct_mode : 1; // bit 10 (v8.2.0.4) - SetOption92 - (Light) Set PWM Mode from regular PWM (0) to ColorTemp (1) control (Xiaomi Philips ...)
uint32_t compress_rules_cpu : 1; // bit 11 (v8.2.0.6) - SetOption93 - (Compress) Keep uncompressed rules in memory to avoid CPU load of uncompressing at each tick (1)
uint32_t max6675 : 1; // bit 12 (v8.3.1.2) - SetOption94 - (MAXxxx) Implement simpler MAX6675 protocol (1) instead of MAX31855 (0)
uint32_t network_wifi : 1; // bit 13 (v8.3.1.3) - CMND_WIFI
uint32_t network_ethernet : 1; // bit 14 (v8.3.1.3) - CMND_ETHERNET
uint32_t tuyamcu_baudrate : 1; // bit 15 (v8.3.1.6) - SetOption97 - (Tuya) Set Baud rate for TuyaMCU serial communication to 9600 (0) or 115200 (1)
uint32_t rotary_uses_rules : 1; // bit 16 (v8.3.1.6) - SetOption98 - (Rotary) Use rules (1) instead of light control (0)
uint32_t zerocross_dimmer : 1; // bit 17 (v8.3.1.4) - SetOption99 - (PWM Dimmer) Enable zerocross dimmer (1)
uint32_t remove_zbreceived : 1; // bit 18 (v8.3.1.7) - SetOption100 - (Zigbee) Remove ZbReceived form JSON message (1)
uint32_t zb_index_ep : 1; // bit 19 (v8.3.1.7) - SetOption101 - (Zigbee) Add the source endpoint as suffix to attributes, ex `Power3` (1) instead of `Power` (0) if sent from endpoint 3
uint32_t obsolete1 : 1; // bit 20 (v9.3.1.3) - SetOption102 - teleinfo_baudrate Obsolete Teleinfo config has now a dedicated bit field
uint32_t mqtt_tls : 1; // bit 21 (v8.4.0.1) - SetOption103 - (MQTT TLS) Enable TLS mode (1) (requires TLS version)
uint32_t mqtt_no_retain : 1; // bit 22 (v8.4.0.1) - SetOption104 - (MQTT) No Retain (1) - disable all MQTT retained messages, some brokers don't support it: AWS IoT, Losant
uint32_t white_blend_mode : 1; // bit 23 (v8.4.0.1) - SetOption105 - (Light) White Blend Mode (1) - used to be `RGBWWTable` last value `0`, now deprecated in favor of this option
uint32_t virtual_ct : 1; // bit 24 (v8.4.0.1) - SetOption106 - (Light) Virtual CT (1) - Creates a virtual White ColorTemp for RGBW lights
uint32_t virtual_ct_cw : 1; // bit 25 (v8.4.0.1) - SetOption107 - (Light) Virtual CT Channel (1) - signals whether the hardware white is cold CW (true) or warm WW (false)
uint32_t obsolete2 : 1; // bit 26 (v9.3.1.3) - SetOption108 - teleinfo_rawdata Obsolete Teleinfo config has now a dedicated bit field
uint32_t alexa_gen_1 : 1; // bit 27 (v8.4.0.3) - SetOption109 - (Alexa) Gen1 mode (1) - if you only have Echo Dot 2nd gen devices
uint32_t zb_disable_autobind : 1; // bit 28 (v8.5.0.1) - SetOption110 - (Zigbee) Disable auto-config (1) when pairing new devices
uint32_t buzzer_freq_mode : 1; // bit 29 (v8.5.0.1) - SetOption111 - (Buzzer) Use frequency output (1) for buzzer pin instead of on/off signal (0)
uint32_t zb_topic_fname : 1; // bit 30 (v8.5.0.1) - SetOption112 - (Zigbee) Use friendly name in zigbee topic (1) (use with SetOption89)
uint32_t rotary_poweron_dimlow : 1; // bit 31 (v9.0.0.2) - SetOption113 - (Rotary) Set dimmer low on rotary dial after power off (1)
};
} SOBitfield4;
// Bitfield to be used for any SetOption114 .. SetOption145 persistent single bit
typedef union { // Restricted by MISRA-C Rule 18.4 but so useful...
uint32_t data; // Allow bit manipulation using SetOption
struct { // SetOption114 .. SetOption145
uint32_t mqtt_switches : 1; // bit 0 (v9.0.0.3) - SetOption114 - (Switch) Detach Switches from relays and enable MQTT action state for all the SwitchModes (1)
uint32_t mi32_enable : 1; // bit 1 (v9.1.0.1) - SetOption115 - (ESP32 BLE) Enable ESP32 MI32 BLE (1)
uint32_t zb_disable_autoquery : 1; // bit 2 (v9.1.0.1) - SetOption116 - (Zigbee) Disable auto-query of zigbee lights and devices (1)
uint32_t fade_fixed_duration : 1; // bit 3 (v9.1.0.2) - SetOption117 - (Light) run fading at fixed duration instead of fixed slew rate
uint32_t zb_received_as_subtopic : 1; // bit 4 (v9.2.0.3) - SetOption118 - (Zigbee) Move ZbReceived from JSON message and into the subtopic replacing "SENSOR" default
uint32_t zb_omit_json_addr : 1; // bit 5 (v9.2.0.3) - SetOption119 - (Zigbee) Remove the device addr from json payload, can be used with zb_topic_fname where the addr is already known from the topic
uint32_t zb_topic_endpoint : 1; // bit 6 (v9.2.0.4) - SetOption120 - (Zigbee) Append endpoint number to topic if device dependent (use with SetOption89)
uint32_t mqtt_state_retain : 1; // bit 7 (v9.3.0.1) - CMND_STATERETAIN
uint32_t mqtt_info_retain : 1; // bit 8 (v9.3.0.1) - CMND_INFORETAIN
uint32_t wiegand_hex_output : 1; // bit 9 (v9.3.1.1) - SetOption123 - (Wiegand) switch tag number output to hex format (1)
uint32_t wiegand_keypad_to_tag : 1; // bit 10 (v9.3.1.1) - SetOption124 - (Wiegand) send key pad stroke as single char (0) or one tag (ending char #) (1)
uint32_t zigbee_hide_bridge_topic : 1; // bit 11 (v9.3.1.1) - SetOption125 - (Zigbee) Hide bridge topic from zigbee topic (use with SetOption89) (1)
uint32_t ds18x20_mean : 1; // bit 12 (v9.3.1.2) - SetOption126 - (DS18x20) Enable arithmetic mean over teleperiod for JSON temperature (1)
uint32_t wifi_no_sleep : 1; // bit 13 (v9.5.0.2) - SetOption127 - (Wifi) Keep wifi in no-sleep mode, prevents some occasional unresponsiveness
uint32_t disable_referer_chk : 1; // bit 14 (v9.5.0.5) - SetOption128 - (Web) Allow access without referer check
uint32_t energy_phase : 1; // bit 15 (v9.5.0.9) - SetOption129 - (Energy) Show phase information
uint32_t show_heap_with_timestamp : 1; // bit 16 (v9.5.0.9) - SetOption130 - (Debug) Show heap with logging timestamp
uint32_t spare17 : 1; // bit 17
uint32_t spare18 : 1; // bit 18
uint32_t spare19 : 1; // bit 19
uint32_t spare20 : 1; // bit 20
uint32_t spare21 : 1; // bit 21
uint32_t spare22 : 1; // bit 22
uint32_t spare23 : 1; // bit 23
uint32_t spare24 : 1; // bit 24
uint32_t spare25 : 1; // bit 25
uint32_t spare26 : 1; // bit 26
uint32_t spare27 : 1; // bit 27
uint32_t spare28 : 1; // bit 28
uint32_t spare29 : 1; // bit 29
uint32_t spare30 : 1; // bit 30
uint32_t spare31 : 1; // bit 31
};
} SOBitfield5;
// Bitfield to be used for persistent multi bit
typedef union {
uint32_t data; // Allow bit manipulation
struct {
uint32_t spare00 : 1;
uint32_t speed_conversion : 3; // (v8.1.0.10) - Tx2x sensor
uint32_t time_format : 2; // (v6.6.0.9) - CMND_TIME
uint32_t calc_resolution : 3;
uint32_t weight_resolution : 2;
uint32_t frequency_resolution : 2;
uint32_t axis_resolution : 2;
uint32_t current_resolution : 2;
uint32_t voltage_resolution : 2;
uint32_t wattage_resolution : 2;
uint32_t emulation : 2;
uint32_t energy_resolution : 3;
uint32_t pressure_resolution : 2;
uint32_t humidity_resolution : 2;
uint32_t temperature_resolution : 2;
};
} SysMBitfield1;
// Bitfield to be used for persistent multi bit
typedef union {
uint32_t data; // Allow bit manipulation
struct {
uint32_t spare00 : 1; // bit 0
uint32_t spare01 : 1; // bit 1
uint32_t spare02 : 1; // bit 2
uint32_t spare03 : 1; // bit 3
uint32_t spare04 : 1; // bit 4
uint32_t spare05 : 1; // bit 5
uint32_t spare06 : 1; // bit 6
uint32_t spare07 : 1; // bit 7
uint32_t spare08 : 1; // bit 8
uint32_t spare09 : 1; // bit 9
uint32_t spare10 : 1; // bit 10
uint32_t spare11 : 1; // bit 11
uint32_t spare12 : 1; // bit 12
uint32_t spare13 : 1; // bit 13
uint32_t spare14 : 1; // bit 14
uint32_t spare15 : 1; // bit 15
uint32_t spare16 : 1; // bit 16
uint32_t spare17 : 1; // bit 17
uint32_t spare18 : 1; // bit 18
uint32_t spare19 : 1; // bit 19
uint32_t spare20 : 1; // bit 20
uint32_t spare21 : 1; // bit 21
uint32_t spare22 : 1; // bit 22
uint32_t spare23 : 1; // bit 23
uint32_t spare24 : 1; // bit 24
uint32_t spare25 : 1; // bit 25
uint32_t spare26 : 1; // bit 26
uint32_t spare27 : 1; // bit 27
uint32_t spare28 : 1; // bit 28
uint32_t spare29 : 1; // bit 29
uint32_t temperature_set_res : 2; // bits 30/31 (v9.3.1.4) - (Tuya)
};
} SysMBitfield2;
// Bitfield to be used for non-SetOption persistent single bit
typedef union {
uint32_t data; // Allow bit manipulation
struct {
uint32_t telegram_send_enable : 1; // bit 0 (v9.4.0.3) - CMND_TMSTATE 0/1 - Enable Telegram send
uint32_t telegram_recv_enable : 1; // bit 1 (v9.4.0.3) - CMND_TMSTATE 2/3 - Enable Telegram receive
uint32_t telegram_echo_enable : 1; // bit 2 (v9.4.0.3) - CMND_TMSTATE 4/5 - Enable Telegram echo
uint32_t range_extender : 1; // bit 3 (v9.5.0.5) - CMND_RGXSTATE - Enable range extender
uint32_t range_extender_napt : 1; // bit 4 (v9.5.0.5) - CMND_RGXNAPT - Enable range extender NAPT
uint32_t sonoff_l1_music_sync : 1; // bit 5 (v9.5.0.5) - CMND_L1MUSICSYNC - Enable sync to music
uint32_t influxdb_default : 1; // bit 6 (v9.5.0.5) - Set influxdb initial defaults if 0
uint32_t influxdb_state : 1; // bit 7 (v9.5.0.5) - CMND_IFX - Enable influxdb support
uint32_t spare08 : 1; // bit 8
uint32_t spare09 : 1; // bit 9
uint32_t spare10 : 1; // bit 10
uint32_t spare11 : 1; // bit 11
uint32_t spare12 : 1; // bit 12
uint32_t spare13 : 1; // bit 13
uint32_t spare14 : 1; // bit 14
uint32_t spare15 : 1; // bit 15
uint32_t spare16 : 1; // bit 16
uint32_t spare17 : 1; // bit 17
uint32_t spare18 : 1; // bit 18
uint32_t spare19 : 1; // bit 19
uint32_t spare20 : 1; // bit 20
uint32_t spare21 : 1; // bit 21
uint32_t spare22 : 1; // bit 22
uint32_t spare23 : 1; // bit 23
uint32_t spare24 : 1; // bit 24
uint32_t spare25 : 1; // bit 25
uint32_t spare26 : 1; // bit 26
uint32_t spare27 : 1; // bit 27
uint32_t spare28 : 1; // bit 28
uint32_t spare29 : 1; // bit 29
uint32_t spare30 : 1; // bit 30
uint32_t spare31 : 1; // bit 31
};
} SBitfield1;
typedef union {
uint16_t data;
struct {
uint16_t hemis : 1; // bit 0 = 0=Northern, 1=Southern Hemisphere (=Opposite DST/STD)
uint16_t week : 3; // bits 1 - 3 = 0=Last week of the month, 1=First, 2=Second, 3=Third, 4=Fourth
uint16_t month : 4; // bits 4 - 7 = 1=Jan, 2=Feb, ... 12=Dec
uint16_t dow : 3; // bits 8 - 10 = day of week, 1=Sun, 2=Mon, ... 7=Sat
uint16_t hour : 5; // bits 11 - 15 = 0-23
};
} TimeRule;
typedef union {
uint32_t data;
struct {
uint32_t time : 11; // bits 0 - 10 = minutes in a day
uint32_t window : 4; // bits 11 - 14 = minutes random window
uint32_t repeat : 1; // bit 15
uint32_t days : 7; // bits 16 - 22 = week day mask
uint32_t device : 4; // bits 23 - 26 = 16 devices
uint32_t power : 2; // bits 27 - 28 = 4 power states - Off, On, Toggle, Blink or Rule
uint32_t mode : 2; // bits 29 - 30 = timer modes - 0 = Scheduler, 1 = Sunrise, 2 = Sunset
uint32_t arm : 1; // bit 31
};
} Timer;
typedef union { // Restricted by MISRA-C Rule 18.4 but so useful...
uint32_t data;
struct {
uint32_t stream : 1;
uint32_t mirror : 1;
uint32_t flip : 1;
uint32_t rtsp : 1;
uint32_t spare4 : 1;
uint32_t spare5 : 1;
uint32_t spare6 : 1;
uint32_t spare7 : 1;
uint32_t spare8 : 1;
uint32_t spare9 : 1;
uint32_t spare10 : 1;
uint32_t spare11 : 1;
uint32_t spare12 : 1;
uint32_t spare13 : 1;
uint32_t spare14 : 1;
uint32_t spare15 : 1;
uint32_t spare16 : 1;
uint32_t spare17 : 1;
uint32_t spare18 : 1;
uint32_t contrast : 3;
uint32_t brightness : 3;
uint32_t saturation : 3;
uint32_t resolution : 4;
};
} WebCamCfg;
typedef union {
uint16_t data;
struct {
uint16_t pinmode : 3; // Pin mode (1 through 6)
uint16_t pullup : 1; // Enable internal weak pull-up resistor
uint16_t saved_state : 1; // Save output state, if used.
uint16_t int_report_mode : 2; // Interrupt reporting mode 0 = immediate telemetry & event, 1 = immediate event only, 2 = immediate telemetry only
uint16_t int_report_defer : 4; // Number of interrupts to ignore until reporting (default 0, max 15)
uint16_t int_count_en : 1; // Enable interrupt counter for this pin
uint16_t int_retain_flag : 1; // Report if interrupt occured for pin in next teleperiod
uint16_t keep_output : 1; // For output modes, preserve the value currently in the MCP230xx
uint16_t spare14 : 1;
uint16_t spare15 : 1;
};
} Mcp230xxCfg;
typedef union {
uint8_t data;
struct {
uint8_t spare0 : 1;
uint8_t spare1 : 1;
uint8_t bh1750_2_resolution : 2;
uint8_t bh1750_1_resolution : 2; // Sensor10 1,2,3
uint8_t hx711_json_weight_change : 1; // Sensor34 8,x - Enable JSON message on weight change
uint8_t mhz19b_abc_disable : 1; // Disable ABC (Automatic Baseline Correction for MHZ19(B) (0 = Enabled (default), 1 = Disabled with Sensor15 command)
};
} SensorCfg1;
typedef union {
uint8_t data;
struct {
uint8_t pwm_count : 3; // Number of PWMs to use for light
uint8_t spare3 : 1;
uint8_t spare4 : 1;
uint8_t spare5 : 1;
uint8_t spare6 : 1;
uint8_t spare7 : 1;
};
} PWMDimmerCfg;
typedef union {
uint8_t data;
struct {
uint8_t nf_autotune : 1; // Autotune the NF Noise Level
uint8_t dist_autotune : 1; // Autotune Disturber on/off
uint8_t nf_autotune_both : 1; // Autotune over both Areas: INDOORS/OUDOORS
uint8_t mqtt_only_Light_Event : 1; // mqtt only if lightning Irq
uint8_t suppress_irq_no_Event : 1; // suppress mqtt "IRQ with no Event". (Chip Bug)
uint8_t spare5 : 1;
uint8_t spare6 : 1;
uint8_t spare7 : 1;
};
} As3935IntCfg;
typedef union {
uint16_t data;
struct {
uint16_t nf_autotune_time : 4; // NF Noise Autotune Time
uint16_t dist_autotune_time : 4; // Disturber Autotune Time
uint16_t nf_autotune_min : 4; // Min Stages
uint16_t spare3 : 4;
};
} As3935Param;
typedef union {
uint32_t data;
struct {
uint32_t raw_skip : 8; // raw frame to skip when sending raw data (set to 2 means send 1 frame, then skip 2, ...)
uint32_t raw_report_changed : 1; // Report only changed values in raw frames (only valid if raw_skip=0)
uint32_t raw_send : 1; // Enable sending also real time raw data over MQTT
uint32_t raw_limit : 1; // Limit raw data to minimal relevant fields (the ones moving quickly)
uint32_t mode_standard : 1; // Set Linky Standard Mode (9600 bps stream) else legacy (1200 bps)
uint32_t spare4_1 : 4; // Keep some spares for future uses
uint32_t spare8_1 : 8; // Keep some spares for future uses
uint32_t spare8_2 : 8; // Keep some spares for future uses
};
} TeleinfoCfg;
typedef struct {
uint32_t usage1_kWhtotal;
uint32_t usage2_kWhtotal;
uint32_t return1_kWhtotal;
uint32_t return2_kWhtotal;
uint32_t last_return_kWhtotal;
uint32_t last_usage_kWhtotal;
} EnergyUsage;
typedef struct {
uint8_t fnid = 0;
uint8_t dpid = 0;
} TuyaFnidDpidMap;
typedef union {
uint8_t data;
struct {
uint8_t type : 3;
uint8_t invert : 1;
uint8_t spare4 : 1;
uint8_t spare5 : 1;
uint8_t spare6 : 1;
uint8_t spare7 : 1;
};
} DisplayOptions;
const uint32_t settings_text_size = 699; // Settings->text_pool[size] = Settings->display_model (2D2) - Settings->text_pool (017)
const uint8_t MAX_TUYA_FUNCTIONS = 16;
typedef struct {
uint16_t cfg_holder; // 000 v6 header
uint16_t cfg_size; // 002
uint32_t save_flag; // 004
uint32_t version; // 008
uint16_t bootcount; // 00C
uint16_t cfg_crc; // 00E
SOBitfield flag; // 010
int16_t save_data; // 014
int8_t timezone; // 016
// Start of char array storing all parameter strings ********
char text_pool[138]; // 017 Size is settings_text_size
char ex_sta_ssid[2][33]; // 0A1
char ex_sta_pwd[2][65]; // 0E3
uint8_t text_pool_165[132]; // 165
char ex_mqtt_host[33]; // 1E9
uint8_t text_pool_20A[35]; // 20A
char ex_mqtt_user[33]; // 22D
char ex_mqtt_pwd[33]; // 24E
char ex_mqtt_topic[33]; // 26F
uint8_t text_pool_290[66]; // 290
// End of single char array of 698 chars max ****************
uint8_t display_model; // 2D2
uint8_t display_mode; // 2D3
uint8_t display_refresh; // 2D4
uint8_t display_rows; // 2D5
uint8_t display_cols[2]; // 2D6
uint8_t display_address[8]; // 2D8
int8_t display_dimmer_protected; // 2E0 - if positive range 0..15, if negative range 0..100 (neg) - don't use directly
uint8_t display_size; // 2E1
TimeRule tflag[2]; // 2E2
uint16_t pwm_frequency; // 2E6
power_t power; // 2E8
uint16_t pwm_value[MAX_PWMS]; // 2EC
int16_t altitude; // 2F6
uint16_t tele_period; // 2F8
uint8_t display_rotate; // 2FA
uint8_t ledstate; // 2FB
uint8_t param[PARAM8_SIZE]; // 2FC SetOption32 .. SetOption49
int16_t toffset[2]; // 30E
uint8_t display_font; // 312
DisplayOptions display_options; // 313
int32_t energy_kWhtoday_ph[3]; // 314
int32_t energy_kWhyesterday_ph[3]; // 320
int32_t energy_kWhtotal_ph[3]; // 32C
uint8_t free_338[7]; // 338
uint8_t tuyamcu_topic; // 33F Manage tuyaSend topic. ex_energy_power_delta on 6.6.0.20, replaced on 8.5.0.1
uint16_t domoticz_update_timer; // 340
uint16_t pwm_range; // 342
uint32_t domoticz_relay_idx[MAX_DOMOTICZ_IDX]; // 344
uint32_t domoticz_key_idx[MAX_DOMOTICZ_IDX]; // 354
uint32_t energy_power_calibration; // 364
uint32_t energy_voltage_calibration; // 368
uint32_t energy_current_calibration; // 36C
uint32_t energy_kWhtoday; // 370
uint32_t energy_kWhyesterday; // 374
uint16_t energy_kWhdoy; // 378
uint16_t energy_min_power; // 37A
uint16_t energy_max_power; // 37C
uint16_t energy_min_voltage; // 37E
uint16_t energy_max_voltage; // 380
uint16_t energy_min_current; // 382
uint16_t energy_max_current; // 384
uint16_t energy_max_power_limit; // 386 MaxPowerLimit
uint16_t energy_max_power_limit_hold; // 388 MaxPowerLimitHold
uint16_t energy_max_power_limit_window; // 38A MaxPowerLimitWindow
uint16_t energy_max_power_safe_limit; // 38C MaxSafePowerLimit
uint16_t energy_max_power_safe_limit_hold; // 38E MaxSafePowerLimitHold
uint16_t energy_max_power_safe_limit_window; // 390 MaxSafePowerLimitWindow
uint16_t energy_max_energy; // 392 MaxEnergy
uint16_t energy_max_energy_start; // 394 MaxEnergyStart
uint16_t mqtt_retry; // 396
uint8_t poweronstate; // 398
uint8_t last_module; // 399
uint16_t blinktime; // 39A
uint16_t blinkcount; // 39C
uint16_t light_rotation; // 39E
SOBitfield3 flag3; // 3A0
uint8_t ex_switchmode[8]; // 3A4 - Free since 9.2.0.6
myio my_gp; // 3AC 2 x 18 bytes (ESP8266) / 2 x 40 bytes (ESP32) / 2 x 22 bytes (ESP32-C3)
#ifdef ESP8266
uint16_t gpio16_converted; // 3D0
uint8_t free_esp8266_3D2[42]; // 3D2
#endif // ESP8266
#ifdef ESP32
#ifdef CONFIG_IDF_TARGET_ESP32C3
uint8_t free_esp32c3_3D8[36]; // 3D8 - Due to smaller myio
#endif // CONFIG_IDF_TARGET_ESP32C3
#endif // ESP32
mytmplt user_template; // 3FC 2 x 15 bytes (ESP8266) / 2 x 37 bytes (ESP32) / 2 x 23 bytes (ESP32-C3)
#ifdef ESP8266
uint8_t free_esp8266_41A[55]; // 41A
#endif // ESP8266
#ifdef ESP32
#ifdef CONFIG_IDF_TARGET_ESP32C3
uint8_t free_esp32c3_42A[28]; // 42A - Due to smaller mytmplt
#endif // CONFIG_IDF_TARGET_ESP32C3
uint8_t eth_type; // 446
uint8_t eth_clk_mode; // 447
uint8_t free_esp32_448[4]; // 448
WebCamCfg webcam_config; // 44C
uint8_t eth_address; // 450
#endif // ESP32
char serial_delimiter; // 451
uint8_t seriallog_level; // 452
uint8_t sleep; // 453
uint16_t domoticz_switch_idx[MAX_DOMOTICZ_IDX]; // 454
uint16_t domoticz_sensor_idx[MAX_DOMOTICZ_SNS_IDX]; // 45C
uint8_t module; // 474
uint8_t ws_color[4][3]; // 475
uint8_t ws_width[3]; // 481
#ifdef ESP8266
myio8 ex_my_gp8; // 484 17 bytes (ESP8266) - Free since 9.0.0.1
#endif // ESP8266
#ifdef ESP32
uint8_t free_esp32_484[17]; // 484
#endif // ESP32
uint8_t ex_my_adc0; // 495 Free since 9.0.0.1
uint16_t light_pixels; // 496
uint8_t light_color[5]; // 498
uint8_t light_correction; // 49D
uint8_t light_dimmer; // 49E
uint8_t rule_enabled; // 49F
uint8_t rule_once; // 4A0 Bit 6+7 used by xdrv_10_scripter
uint8_t light_fade; // 4A1
uint8_t light_speed; // 4A2
uint8_t light_scheme; // 4A3
uint8_t light_width; // 4A4
uint8_t knx_GA_registered; // 4A5 Number of Group Address to read
uint16_t light_wakeup; // 4A6
uint8_t knx_CB_registered; // 4A8 Number of Group Address to write
uint8_t switchmode[MAX_SWITCHES_SET]; // 4A9
uint8_t free_4c5[5]; // 4C5
uint8_t ex_interlock[4]; // 4CA MAX_INTERLOCKS = MAX_RELAYS / 2 (Legacy)
uint16_t influxdb_port; // 4CE
power_t interlock[MAX_INTERLOCKS_SET]; // 4D0 MAX_INTERLOCKS = MAX_RELAYS / 2
uint8_t free_508[36]; // 508
uint16_t mqtt_keepalive; // 52C
uint16_t mqtt_socket_timeout; // 52E
uint8_t mqtt_wifi_timeout; // 530
uint8_t ina219_mode; // 531
uint16_t pulse_timer[MAX_PULSETIMERS]; // 532
uint16_t button_debounce; // 542
uint32_t ipv4_address[5]; // 544
uint32_t ipv4_rgx_address; // 558
uint32_t ipv4_rgx_subnetmask; // 55C
uint8_t free_560[92]; // 560
SysMBitfield1 flag2; // 5BC
uint32_t pulse_counter[MAX_COUNTERS]; // 5C0
uint16_t pulse_counter_type; // 5D0
uint16_t pulse_counter_debounce; // 5D2
uint8_t rf_code[17][9]; // 5D4
uint8_t timezone_minutes; // 66D
uint16_t switch_debounce; // 66E
Timer timer[MAX_TIMERS]; // 670
int latitude; // 6B0
int longitude; // 6B4
uint16_t knx_physsical_addr; // 6B8 (address_t is a uint16_t)
uint16_t knx_GA_addr[MAX_KNX_GA]; // 6BA (address_t is a uint16_t) x KNX_max_GA
uint16_t knx_CB_addr[MAX_KNX_CB]; // 6CE (address_t is a uint16_t) x KNX_max_CB
uint8_t knx_GA_param[MAX_KNX_GA]; // 6E2 Type of Input (relay changed, button pressed, sensor read <-teleperiod)
uint8_t knx_CB_param[MAX_KNX_CB]; // 6EC Type of Output (set relay, toggle relay, reply sensor value)
Mcp230xxCfg mcp230xx_config[16]; // 6F6
uint8_t mcp230xx_int_prio; // 716
SensorCfg1 SensorBits1; // 717 On/Off settings used by Sensor Commands
uint16_t mcp230xx_int_timer; // 718
uint8_t rgbwwTable[5]; // 71A
uint8_t user_template_base; // 71F
char user_template_name[15]; // 720 15 bytes - Backward compatibility since v8.2.0.3
#ifdef ESP8266
mytmplt8285 ex_user_template8; // 72F 14 bytes (ESP8266) - Free since 9.0.0.1
#endif // ESP8266
#ifdef ESP32
uint8_t free_esp32_72f[14]; // 72F
#endif // ESP32
uint8_t novasds_startingoffset; // 73D
uint8_t web_color[18][3]; // 73E
uint16_t display_width; // 774
uint16_t display_height; // 776
uint16_t baudrate; // 778
uint16_t sbaudrate; // 77A
EnergyUsage energy_usage; // 77C
uint32_t sensors[2][4]; // 794 Disable individual (0) sensor drivers / (1) GUI sensor output
uint32_t energy_kWhtotal_time; // 7B4
uint32_t weight_item; // 7B8 Weight of one item in gram * 10
uint16_t ledmask; // 7BC
uint16_t weight_max; // 7BE Total max weight in kilogram
uint32_t weight_reference; // 7C0 Reference weight in gram
uint32_t weight_calibration; // 7C4
uint32_t energy_frequency_calibration; // 7C8 Also used by HX711 to save last weight
uint16_t web_refresh; // 7CC
char script_pram[5][10]; // 7CE
char rules[MAX_RULE_SETS][MAX_RULE_SIZE]; // 800 Uses 512 bytes in v5.12.0m, 3 x 512 bytes in v5.14.0b
TuyaFnidDpidMap tuya_fnid_map[MAX_TUYA_FUNCTIONS]; // E00 32 bytes
uint16_t ina226_r_shunt[4]; // E20
uint16_t ina226_i_fs[4]; // E28
uint16_t tariff[4][2]; // E30
uint16_t shutter_opentime[MAX_SHUTTERS]; // E40
uint16_t shutter_closetime[MAX_SHUTTERS]; // E48
int16_t shuttercoeff[5][MAX_SHUTTERS]; // E50
uint8_t shutter_options[MAX_SHUTTERS]; // E78
uint8_t shutter_set50percent[MAX_SHUTTERS]; // E7C
uint8_t shutter_position[MAX_SHUTTERS]; // E80
uint8_t shutter_startrelay[MAX_SHUTTERS]; // E84
uint8_t pcf8574_config[MAX_PCF8574]; // E88
uint8_t ot_hot_water_setpoint; // E8C
uint8_t ot_boiler_setpoint; // E8D
uint8_t ot_flags; // E8E
uint8_t ledpwm_mask; // E8F
uint16_t dimmer_hw_min; // E90
uint16_t dimmer_hw_max; // E92
uint32_t deepsleep; // E94
uint16_t hass_new_discovery; // E98 ex2_energy_power_delta on 8.4.0.3, replaced on 8.5.0.1
uint8_t shutter_motordelay[MAX_SHUTTERS]; // E9A
int8_t temp_comp; // E9E
uint8_t weight_change; // E9F
uint8_t web_color2[2][3]; // EA0 Needs to be on integer / 3 distance from web_color
uint8_t free_ea6[33]; // EA6
uint8_t sta_config; // EC7
uint8_t sta_active; // EC8
uint8_t rule_stop; // EC9
uint16_t syslog_port; // ECA
uint8_t syslog_level; // ECC
uint8_t webserver; // ECD
uint8_t weblog_level; // ECE
uint8_t mqtt_fingerprint[2][20]; // ECF
uint8_t influxdb_version; // EF7
SOBitfield4 flag4; // EF8
uint16_t mqtt_port; // EFC
uint8_t serial_config; // EFE
uint8_t wifi_output_power; // EFF
uint8_t shutter_accuracy; // F00
uint8_t mqttlog_level; // F01
uint8_t sps30_inuse_hours; // F02
uint8_t hotplug_scan; // F03
uint8_t bri_power_on; // F04
PWMDimmerCfg pwm_dimmer_cfg; // F05
uint8_t bri_preset_low; // F06
uint8_t bri_preset_high; // F07
int8_t hum_comp; // F08
uint8_t wifi_channel; // F09
uint8_t wifi_bssid[6]; // F0A
uint8_t as3935_sensor_cfg[5]; // F10
As3935IntCfg as3935_functions; // F15
As3935Param as3935_parameter; // F16
uint64_t zb_ext_panid; // F18
uint64_t zb_precfgkey_l; // F20
uint64_t zb_precfgkey_h; // F28
uint16_t zb_pan_id; // F30
uint8_t zb_channel; // F32
int8_t zb_txradio_dbm; // F33
uint16_t pms_wake_interval; // F34
uint8_t config_version; // F36
uint8_t windmeter_pulses_x_rot; // F37
uint16_t windmeter_radius; // F38
uint16_t windmeter_pulse_debounce; // F3A
int16_t windmeter_speed_factor; // F3C
uint8_t windmeter_tele_pchange; // F3E
uint8_t ledpwm_on; // F3F
uint8_t ledpwm_off; // F40
uint8_t tcp_baudrate; // F41
uint8_t fallback_module; // F42
uint8_t shutter_mode; // F43
uint16_t energy_power_delta[3]; // F44
uint16_t shutter_pwmrange[2][MAX_SHUTTERS]; // F4A
uint8_t dimmer_step; // F5A
uint8_t shd_leading_edge; // F5B
uint16_t shd_warmup_brightness; // F5C
uint8_t shd_warmup_time; // F5E
uint8_t tcp_config; // F5F
uint8_t free_f60[60]; // F60 - Decrement if adding new Setting variables just above and below
// Only 32 bit boundary variables below
uint32_t energy_kWhtotal; // F9C
SBitfield1 sbflag1; // FA0
TeleinfoCfg teleinfo; // FA4
uint64_t rf_protocol_mask; // FA8
uint8_t device_group_tie[4]; // FB0
SOBitfield5 flag5; // FB4
uint16_t pulse_counter_debounce_low; // FB8
uint16_t pulse_counter_debounce_high; // FBA
uint32_t keeloq_master_msb; // FBC
uint32_t keeloq_master_lsb; // FC0
uint32_t keeloq_serial; // FC4
uint32_t keeloq_count; // FC8
uint32_t device_group_share_in; // FCC Bitmask of device group items imported
uint32_t device_group_share_out; // FD0 Bitmask of device group items exported
uint32_t bootcount_reset_time; // FD4
SysMBitfield2 mbflag2; // FD8
uint32_t shutter_button[MAX_SHUTTER_KEYS]; // FDC
uint32_t i2c_drivers[3]; // FEC I2cDriver
uint32_t cfg_timestamp; // FF8
uint32_t cfg_crc32; // FFC
} TSettings;
typedef struct {
uint16_t valid; // 280 (RTC memory offset 100 - sizeof(RTCRBT))
uint8_t fast_reboot_count; // 282
uint8_t free_003[1]; // 283
} TRtcReboot;
TRtcReboot RtcReboot;
#ifdef ESP32
RTC_NOINIT_ATTR TRtcReboot RtcDataReboot;
#endif // ESP32
typedef struct {
uint16_t valid; // 290 (RTC memory offset 100)
uint8_t oswatch_blocked_loop; // 292
uint8_t ota_loader; // 293
uint32_t energy_kWhtoday; // 294
uint32_t energy_kWhtotal; // 298
volatile uint32_t pulse_counter[MAX_COUNTERS]; // 29C - See #9521 why volatile
power_t power; // 2AC
EnergyUsage energy_usage; // 2B0
uint32_t nextwakeup; // 2C8
uint32_t baudrate; // 2CC
uint32_t ultradeepsleep; // 2D0
uint16_t deepsleep_slip; // 2D4
uint8_t free_2d6[2]; // 2D6
int32_t energy_kWhtoday_ph[3]; // 2D8
int32_t energy_kWhtotal_ph[3]; // 2E4
// 2F0 - 2FF free locations
} TRtcSettings;
TRtcSettings RtcSettings;
#ifdef ESP32
RTC_NOINIT_ATTR TRtcSettings RtcDataSettings;
#endif // ESP32
struct TIME_T {
uint8_t second;
uint8_t minute;
uint8_t hour;
uint8_t day_of_week; // sunday is day 1
uint8_t day_of_month;
uint8_t month;
char name_of_month[4];
uint16_t day_of_year;
uint16_t year;
uint32_t days;
uint32_t valid;
} RtcTime;
struct XDRVMAILBOX {
bool grpflg;
bool usridx;
uint16_t command_code;
uint32_t index;
uint32_t data_len;
int32_t payload;
char *topic;
char *data;
char *command;
} XdrvMailbox;
#ifdef USE_SHUTTER
const uint8_t MAX_RULES_FLAG = 11; // Number of bits used in RulesBitfield (tricky I know...)
#else
const uint8_t MAX_RULES_FLAG = 9; // Number of bits used in RulesBitfield (tricky I know...)
#endif // USE_SHUTTER
typedef union { // Restricted by MISRA-C Rule 18.4 but so useful...
uint16_t data; // Allow bit manipulation
struct {
uint16_t system_init : 1; // Changing layout here needs adjustments in xdrv_10_rules.ino too
uint16_t system_boot : 1;
uint16_t time_init : 1;
uint16_t time_set : 1;
uint16_t mqtt_connected : 1;
uint16_t mqtt_disconnected : 1;
uint16_t wifi_connected : 1;
uint16_t wifi_disconnected : 1;
uint16_t http_init : 1;
uint16_t shutter_moved : 1;
uint16_t shutter_moving : 1;
uint16_t spare11 : 1;
uint16_t spare12 : 1;
uint16_t spare13 : 1;
uint16_t spare14 : 1;
uint16_t spare15 : 1;
};
} RulesBitfield;
typedef union {
uint8_t data;
struct {
uint8_t network_down : 1;
uint8_t mqtt_down : 1;
uint8_t wifi_down : 1;
uint8_t eth_down : 1;
uint8_t spare04 : 1;
uint8_t spare05 : 1;
uint8_t spare06 : 1;
uint8_t spare07 : 1;
};
} StateBitfield;
// See issue https://github.com/esp8266/Arduino/issues/2913
#ifdef ESP8266
#ifdef USE_ADC_VCC
ADC_MODE(ADC_VCC); // Set ADC input for Power Supply Voltage usage
#endif
#endif
#endif // _SETTINGS_H_