mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Tasmota/tasmota/xnrg_02_cse7766.ino

309 lines
11 KiB
C++
Raw Blame History

/*
xnrg_02_cse7766.ino - CSE7766 and HLW8032 energy sensor support for Tasmota
Copyright (C) 2020 Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_ENERGY_SENSOR
#ifdef USE_CSE7766
/*********************************************************************************************\
* CSE7759 and CSE7766 - Energy (Sonoff S31 and Sonoff Pow R2)
* HLW8032 - Energy (Blitzwolf SHP5)
*
* Needs GPIO_CSE7766_RX only
*
* Based on datasheet from http://www.chipsea.com/UploadFiles/2017/08/11144342F01B5662.pdf
\*********************************************************************************************/
#define XNRG_02 2
#define CSE_MAX_INVALID_POWER 128 // Number of invalid power receipts before deciding active power is zero
#define CSE_NOT_CALIBRATED 0xAA
#define CSE_PULSES_NOT_INITIALIZED -1
#define CSE_PREF 1000
#define CSE_UREF 100
#define CSE_BUFFER_SIZE 25
#include <TasmotaSerial.h>
TasmotaSerial *CseSerial = nullptr;
struct CSE {
long voltage_cycle = 0;
long current_cycle = 0;
long power_cycle = 0;
long power_cycle_first = 0;
long cf_pulses = 0;
long cf_pulses_last_time = CSE_PULSES_NOT_INITIALIZED;
int byte_counter = 0;
uint8_t *rx_buffer = nullptr;
uint8_t power_invalid = 0;
bool received = false;
} Cse;
void CseReceived(void)
{
// 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23
// F2 5A 02 F7 60 00 03 61 00 40 10 05 72 40 51 A6 58 63 10 1B E1 7F 4D 4E - F2 = Power cycle exceeds range - takes too long - No load
// 55 5A 02 F7 60 00 03 5A 00 40 10 04 8B 9F 51 A6 58 18 72 75 61 AC A1 30 - 55 = Ok, 61 = Power not valid (load below 5W)
// 55 5A 02 F7 60 00 03 AB 00 40 10 02 60 5D 51 A6 58 03 E9 EF 71 0B 7A 36 - 55 = Ok, 71 = Ok
// Hd Id VCal---- Voltage- ICal---- Current- PCal---- Power--- Ad CF--- Ck
uint8_t header = Cse.rx_buffer[0];
if ((header & 0xFC) == 0xFC) {
AddLog_P(LOG_LEVEL_DEBUG, PSTR("CSE: Abnormal hardware"));
return;
}
// Get chip calibration data (coefficients) and use as initial defaults
if (HLW_UREF_PULSE == Settings.energy_voltage_calibration) {
long voltage_coefficient = 191200; // uSec
if (CSE_NOT_CALIBRATED != header) {
voltage_coefficient = Cse.rx_buffer[2] << 16 | Cse.rx_buffer[3] << 8 | Cse.rx_buffer[4];
}
Settings.energy_voltage_calibration = voltage_coefficient / CSE_UREF;
}
if (HLW_IREF_PULSE == Settings.energy_current_calibration) {
long current_coefficient = 16140; // uSec
if (CSE_NOT_CALIBRATED != header) {
current_coefficient = Cse.rx_buffer[8] << 16 | Cse.rx_buffer[9] << 8 | Cse.rx_buffer[10];
}
Settings.energy_current_calibration = current_coefficient;
}
if (HLW_PREF_PULSE == Settings.energy_power_calibration) {
long power_coefficient = 5364000; // uSec
if (CSE_NOT_CALIBRATED != header) {
power_coefficient = Cse.rx_buffer[14] << 16 | Cse.rx_buffer[15] << 8 | Cse.rx_buffer[16];
}
Settings.energy_power_calibration = power_coefficient / CSE_PREF;
}
uint8_t adjustement = Cse.rx_buffer[20];
Cse.voltage_cycle = Cse.rx_buffer[5] << 16 | Cse.rx_buffer[6] << 8 | Cse.rx_buffer[7];
Cse.current_cycle = Cse.rx_buffer[11] << 16 | Cse.rx_buffer[12] << 8 | Cse.rx_buffer[13];
Cse.power_cycle = Cse.rx_buffer[17] << 16 | Cse.rx_buffer[18] << 8 | Cse.rx_buffer[19];
Cse.cf_pulses = Cse.rx_buffer[21] << 8 | Cse.rx_buffer[22];
if (Energy.power_on) { // Powered on
if (adjustement & 0x40) { // Voltage valid
Energy.voltage[0] = (float)(Settings.energy_voltage_calibration * CSE_UREF) / (float)Cse.voltage_cycle;
}
if (adjustement & 0x10) { // Power valid
Cse.power_invalid = 0;
if ((header & 0xF2) == 0xF2) { // Power cycle exceeds range
Energy.active_power[0] = 0;
} else {
if (0 == Cse.power_cycle_first) { Cse.power_cycle_first = Cse.power_cycle; } // Skip first incomplete Cse.power_cycle
if (Cse.power_cycle_first != Cse.power_cycle) {
Cse.power_cycle_first = -1;
Energy.active_power[0] = (float)(Settings.energy_power_calibration * CSE_PREF) / (float)Cse.power_cycle;
} else {
Energy.active_power[0] = 0;
}
}
} else {
if (Cse.power_invalid < Settings.param[P_CSE7766_INVALID_POWER]) { // Allow measurements down to about 1W
Cse.power_invalid++;
} else {
Cse.power_cycle_first = 0;
Energy.active_power[0] = 0; // Powered on but no load
}
}
if (adjustement & 0x20) { // Current valid
if (0 == Energy.active_power[0]) {
Energy.current[0] = 0;
} else {
Energy.current[0] = (float)Settings.energy_current_calibration / (float)Cse.current_cycle;
}
}
} else { // Powered off
Cse.power_cycle_first = 0;
Energy.voltage[0] = 0;
Energy.active_power[0] = 0;
Energy.current[0] = 0;
}
}
bool CseSerialInput(void)
{
while (CseSerial->available()) {
yield();
uint8_t serial_in_byte = CseSerial->read();
if (Cse.received) {
Cse.rx_buffer[Cse.byte_counter++] = serial_in_byte;
if (24 == Cse.byte_counter) {
AddLogBuffer(LOG_LEVEL_DEBUG_MORE, Cse.rx_buffer, 24);
uint8_t checksum = 0;
for (uint32_t i = 2; i < 23; i++) { checksum += Cse.rx_buffer[i]; }
if (checksum == Cse.rx_buffer[23]) {
Energy.data_valid[0] = 0;
CseReceived();
Cse.received = false;
return true;
} else {
AddLog_P(LOG_LEVEL_DEBUG, PSTR("CSE: " D_CHECKSUM_FAILURE));
do { // Sync buffer with data (issue #1907 and #3425)
memmove(Cse.rx_buffer, Cse.rx_buffer +1, 24);
Cse.byte_counter--;
} while ((Cse.byte_counter > 2) && (0x5A != Cse.rx_buffer[1]));
if (0x5A != Cse.rx_buffer[1]) {
Cse.received = false;
Cse.byte_counter = 0;
}
}
}
} else {
if ((0x5A == serial_in_byte) && (1 == Cse.byte_counter)) { // 0x5A - Packet header 2
Cse.received = true;
} else {
Cse.byte_counter = 0;
}
Cse.rx_buffer[Cse.byte_counter++] = serial_in_byte;
}
}
}
/********************************************************************************************/
void CseEverySecond(void)
{
if (Energy.data_valid[0] > ENERGY_WATCHDOG) {
Cse.voltage_cycle = 0;
Cse.current_cycle = 0;
Cse.power_cycle = 0;
} else {
long cf_frequency = 0;
if (CSE_PULSES_NOT_INITIALIZED == Cse.cf_pulses_last_time) {
Cse.cf_pulses_last_time = Cse.cf_pulses; // Init after restart
} else {
if (Cse.cf_pulses < Cse.cf_pulses_last_time) { // Rolled over after 65535 pulses
cf_frequency = (65536 - Cse.cf_pulses_last_time) + Cse.cf_pulses;
} else {
cf_frequency = Cse.cf_pulses - Cse.cf_pulses_last_time;
}
if (cf_frequency && Energy.active_power[0]) {
unsigned long delta = (cf_frequency * Settings.energy_power_calibration) / 36;
// prevent invalid load delta steps even checksum is valid (issue #5789):
// if (delta <= (3680*100/36) * 10 ) { // max load for S31/Pow R2: 3.68kW
// prevent invalid load delta steps even checksum is valid but allow up to 4kW (issue #7155):
if (delta <= (4000*100/36) * 10 ) { // max load for S31/Pow R2: 4.00kW
Cse.cf_pulses_last_time = Cse.cf_pulses;
Energy.kWhtoday_delta += delta;
}
else {
AddLog_P(LOG_LEVEL_DEBUG, PSTR("CSE: Load overflow"));
Cse.cf_pulses_last_time = CSE_PULSES_NOT_INITIALIZED;
}
EnergyUpdateToday();
}
}
}
}
void CseSnsInit(void)
{
// Software serial init needs to be done here as earlier (serial) interrupts may lead to Exceptions
// CseSerial = new TasmotaSerial(Pin(GPIO_CSE7766_RX), Pin(GPIO_CSE7766_TX), 1);
CseSerial = new TasmotaSerial(Pin(GPIO_CSE7766_RX), -1, 1);
if (CseSerial->begin(4800, 2)) { // Fake Software Serial 8E1 by using two stop bits
if (CseSerial->hardwareSerial()) {
SetSerial(4800, TS_SERIAL_8E1);
ClaimSerial();
}
if (0 == Settings.param[P_CSE7766_INVALID_POWER]) {
Settings.param[P_CSE7766_INVALID_POWER] = CSE_MAX_INVALID_POWER; // SetOption39 1..255
}
Cse.power_invalid = Settings.param[P_CSE7766_INVALID_POWER];
} else {
energy_flg = ENERGY_NONE;
}
}
void CseDrvInit(void)
{
// if (PinUsed(GPIO_CSE7766_RX) && PinUsed(GPIO_CSE7766_TX)) {
if (PinUsed(GPIO_CSE7766_RX)) {
Cse.rx_buffer = (uint8_t*)(malloc(CSE_BUFFER_SIZE));
if (Cse.rx_buffer != nullptr) {
energy_flg = XNRG_02;
}
}
}
bool CseCommand(void)
{
bool serviced = true;
if (CMND_POWERSET == Energy.command_code) {
if (XdrvMailbox.data_len && Cse.power_cycle) {
Settings.energy_power_calibration = (unsigned long)(CharToFloat(XdrvMailbox.data) * Cse.power_cycle) / CSE_PREF;
}
}
else if (CMND_VOLTAGESET == Energy.command_code) {
if (XdrvMailbox.data_len && Cse.voltage_cycle) {
Settings.energy_voltage_calibration = (unsigned long)(CharToFloat(XdrvMailbox.data) * Cse.voltage_cycle) / CSE_UREF;
}
}
else if (CMND_CURRENTSET == Energy.command_code) {
if (XdrvMailbox.data_len && Cse.current_cycle) {
Settings.energy_current_calibration = (unsigned long)(CharToFloat(XdrvMailbox.data) * Cse.current_cycle) / 1000;
}
}
else serviced = false; // Unknown command
return serviced;
}
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
bool Xnrg02(uint8_t function)
{
bool result = false;
switch (function) {
case FUNC_LOOP:
if (CseSerial) { CseSerialInput(); }
break;
case FUNC_ENERGY_EVERY_SECOND:
CseEverySecond();
break;
case FUNC_COMMAND:
result = CseCommand();
break;
case FUNC_INIT:
CseSnsInit();
break;
case FUNC_PRE_INIT:
CseDrvInit();
break;
}
return result;
}
#endif // USE_CSE7766
#endif // USE_ENERGY_SENSOR
Reference in New Issue View Git Blame Copy Permalink