Tasmota/tasmota/tasmota_xdrv_driver/xdrv_29_deepsleep.ino

233 lines
9.6 KiB
C++

/*
xdrv_29_deepsleep.ino - DeepSleep support for Tasmota
Copyright (C) 2023 Stefan Bode
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_DEEPSLEEP
/*********************************************************************************************\
* DeepSleep Support
*
* - For wakeup from DeepSleep needs GPIO16 to be connected to RST
* - GPIO_DEEPSLEEP may be used to stop DeepSleep when connected to Gnd
* - GPIO16 may be configured as GPIO_DEEPSLEEP
*
* See wiki https://tasmota.github.io/docs/DeepSleep/
\*********************************************************************************************/
#define XDRV_29 29
#define D_PRFX_DEEPSLEEP "DeepSleep"
#define D_CMND_DEEPSLEEP_TIME "Time"
#ifndef DEEPSLEEP_NETWORK_TIMEOUT
#define DEEPSLEEP_NETWORK_TIMEOUT 15
#endif
const uint32_t DEEPSLEEP_MAX = 10 * 366 * 24 * 60 * 60; // Allow max 10 years sleep
const uint32_t DEEPSLEEP_MAX_CYCLE = 60 * 60; // Maximum time for a deepsleep as defined by chip hardware
const uint32_t DEEPSLEEP_MIN_TIME = 5; // Allow 5 seconds skew
const uint32_t DEEPSLEEP_START_COUNTDOWN = 4; // Allow 4 seconds to update web console before deepsleep
const char kDeepsleepCommands[] PROGMEM = D_PRFX_DEEPSLEEP "|"
D_CMND_DEEPSLEEP_TIME ;
void (* const DeepsleepCommand[])(void) PROGMEM = {
&CmndDeepsleepTime };
uint32_t deepsleep_sleeptime = 0;
uint8_t deepsleep_flag = 0;
bool DeepSleepEnabled(void)
{
if ((Settings->deepsleep < 10) || (Settings->deepsleep > DEEPSLEEP_MAX)) {
Settings->deepsleep = 0; // Issue #6961
return false; // Disabled
}
if (PinUsed(GPIO_DEEPSLEEP)) {
pinMode(Pin(GPIO_DEEPSLEEP), INPUT_PULLUP);
return (digitalRead(Pin(GPIO_DEEPSLEEP))); // Disable DeepSleep if user holds pin GPIO_DEEPSLEEP low
}
return true; // Enabled
}
void DeepSleepReInit(void)
{
if ((ResetReason() == REASON_DEEP_SLEEP_AWAKE) && DeepSleepEnabled()) {
if ((RtcSettings.ultradeepsleep > DEEPSLEEP_MAX_CYCLE) && (RtcSettings.ultradeepsleep < 1700000000)) {
// Go back to sleep after 60 minutes if requested deepsleep has not been reached
RtcSettings.ultradeepsleep = RtcSettings.ultradeepsleep - DEEPSLEEP_MAX_CYCLE;
AddLog(LOG_LEVEL_ERROR, PSTR("DSL: Remain DeepSleep %d"), RtcSettings.ultradeepsleep);
RtcSettingsSave();
RtcRebootReset();
#ifdef ESP8266
ESP.deepSleep(100 * RtcSettings.deepsleep_slip * (DEEPSLEEP_MAX_CYCLE < RtcSettings.ultradeepsleep ? DEEPSLEEP_MAX_CYCLE : RtcSettings.ultradeepsleep), WAKE_RF_DEFAULT);
#endif // ESP8266
#ifdef ESP32
esp_sleep_enable_timer_wakeup(100 * RtcSettings.deepsleep_slip * (DEEPSLEEP_MAX_CYCLE < RtcSettings.ultradeepsleep ? DEEPSLEEP_MAX_CYCLE : RtcSettings.ultradeepsleep));
esp_deep_sleep_start();
#endif // ESP32
yield();
// Sleeping
}
}
// Stay awake
RtcSettings.ultradeepsleep = 0;
}
void DeepSleepStart(void)
{
char stopic[TOPSZ];
// Deepsleep_slip is ideally 10.000 == 100%
// Typically the device has up to 4% slip. Anything else is a wrong setting in the deepsleep_slip
// Therefore all values >110% or <90% will be resetted to 100% to avoid crazy sleep times.
// This should normally never executed, but can happen an manual wakeup and problems during wakeup
if ((RtcSettings.nextwakeup == 0) ||
(RtcSettings.deepsleep_slip < 9000) ||
(RtcSettings.deepsleep_slip > 11000) ||
(RtcSettings.nextwakeup > (LocalTime() + Settings->deepsleep))) {
AddLog(LOG_LEVEL_ERROR, PSTR("DSL: Reset wrong settings wakeup: %ld, slip %ld"), RtcSettings.nextwakeup, RtcSettings.deepsleep_slip );
RtcSettings.nextwakeup = 0;
RtcSettings.deepsleep_slip = 10000;
}
// Timeslip in 0.1 seconds between the real wakeup and the calculated wakeup
// Because deepsleep is in second and timeslip in 0.1 sec the compare always check if the slip is in the 10% range
int32_t timeslip = (int32_t)(RtcSettings.nextwakeup + millis() / 1000 - LocalTime()) * 10;
// Allow 10% of deepsleep error to count as valid deepsleep; expecting 3-4%
// if more then 10% timeslip = 0 == non valid wakeup; maybe manual
timeslip = (timeslip < -(int32_t)Settings->deepsleep) ? 0 : (timeslip > (int32_t)Settings->deepsleep) ? 0 : 1;
if (timeslip) {
RtcSettings.nextwakeup += Settings->deepsleep;
RtcSettings.deepsleep_slip = (RtcSettings.nextwakeup - LocalTime()) * RtcSettings.deepsleep_slip / tmax((Settings->deepsleep - (millis() / 1000)),5);
// Avoid crazy numbers. Again maximum 10% deviation.
RtcSettings.deepsleep_slip = tmin(tmax(RtcSettings.deepsleep_slip, 9000), 11000);
}
// AddLog(LOG_LEVEL_DEBUG, PSTR("DSL: Time %ld, next %ld, slip %ld"), timeslip, RtcSettings.nextwakeup, RtcSettings.deepsleep_slip );
// It may happen that wakeup in just <5 seconds in future
// In this case also add deepsleep to nextwakeup
if (RtcSettings.nextwakeup <= (LocalTime() + DEEPSLEEP_MIN_TIME)) {
// ensure nextwakeup is at least in the future, and add 5%
RtcSettings.nextwakeup += (((LocalTime() + DEEPSLEEP_MIN_TIME - RtcSettings.nextwakeup) / Settings->deepsleep) + 1) * Settings->deepsleep;
RtcSettings.nextwakeup += Settings->deepsleep * 0.05;
// AddLog(LOG_LEVEL_DEBUG, PSTR("DSL: Time too short: time %ld, next %ld, slip %ld"), timeslip, RtcSettings.nextwakeup, RtcSettings.deepsleep_slip);
}
String dt = GetDT(RtcSettings.nextwakeup); // 2017-03-07T11:08:02
// Limit sleeptime to DEEPSLEEP_MAX_CYCLE
// uint32_t deepsleep_sleeptime = DEEPSLEEP_MAX_CYCLE < (RtcSettings.nextwakeup - LocalTime()) ? (uint32_t)DEEPSLEEP_MAX_CYCLE : RtcSettings.nextwakeup - LocalTime();
deepsleep_sleeptime = tmin((uint32_t)DEEPSLEEP_MAX_CYCLE ,RtcSettings.nextwakeup - LocalTime());
// Sending Deepsleep parameters to automation for react
Response_P(PSTR("{\"" D_PRFX_DEEPSLEEP "\":{\"" D_JSON_TIME "\":\"%s\",\"" D_PRFX_DEEPSLEEP "\":%d,\"Wakeup\":%d}}"), (char*)dt.c_str(), LocalTime(), RtcSettings.nextwakeup);
MqttPublishPrefixTopicRulesProcess_P(TELE, PSTR(D_PRFX_DEEPSLEEP), true);
// Change LWT Topic to Sleep to ensure automation see different state
//GetTopic_P(stopic, TELE, TasmotaGlobal.mqtt_topic, S_LWT);
//Response_P(PSTR(D_PRFX_DEEPSLEEP));
//MqttPublish(stopic, true);
//MqttClient.disconnect(true);
//EspClient.stop();
WifiShutdown();
RtcSettings.ultradeepsleep = RtcSettings.nextwakeup - LocalTime();
RtcSettingsSave();
RtcRebootReset();
#ifdef ESP8266
ESP.deepSleep(100 * RtcSettings.deepsleep_slip * deepsleep_sleeptime);
#endif // ESP8266
#ifdef ESP32
esp_sleep_enable_timer_wakeup(100 * RtcSettings.deepsleep_slip * deepsleep_sleeptime);
esp_deep_sleep_start();
#endif // ESP32
yield();
}
void DeepSleepEverySecond(void)
{
//AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("Wifi Info: up %d, wifidown %d, wifistatus %d, flag %d"),TasmotaGlobal.uptime, TasmotaGlobal.global_state.wifi_down, Wifi.status , deepsleep_flag);
if (DEEPSLEEP_NETWORK_TIMEOUT && TasmotaGlobal.uptime > DEEPSLEEP_NETWORK_TIMEOUT && Wifi.status != WL_CONNECTED && !deepsleep_flag && DeepSleepEnabled()) {
AddLog(LOG_LEVEL_ERROR, PSTR("Error Wifi could not connect %d seconds. Deepsleep"), DEEPSLEEP_NETWORK_TIMEOUT);
deepsleep_flag = DEEPSLEEP_START_COUNTDOWN; // Start deepsleep in 4 seconds
}
if (!deepsleep_flag) { return; }
if (DeepSleepEnabled()) {
if (DEEPSLEEP_START_COUNTDOWN == deepsleep_flag) {
SettingsSaveAll();
DeepSleepStart();
}
} else {
deepsleep_flag = 0;
}
}
/*********************************************************************************************\
* Commands
\*********************************************************************************************/
void CmndDeepsleepTime(void)
{
if ((0 == XdrvMailbox.payload) ||
((XdrvMailbox.payload > 10) && (XdrvMailbox.payload < DEEPSLEEP_MAX))) {
Settings->deepsleep = XdrvMailbox.payload;
RtcSettings.nextwakeup = 0;
deepsleep_flag = (0 == XdrvMailbox.payload) ? 0 : DEEPSLEEP_START_COUNTDOWN;
if (deepsleep_flag) {
if (!Settings->tele_period) {
Settings->tele_period = TELE_PERIOD; // Need teleperiod to go back to sleep
}
}
TasmotaGlobal.discovery_counter = 1; // force TasDiscovery()
}
ResponseCmndNumber(Settings->deepsleep);
}
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
bool Xdrv29(uint32_t function)
{
bool result = false;
switch (function) {
case FUNC_EVERY_SECOND:
DeepSleepEverySecond();
break;
case FUNC_AFTER_TELEPERIOD:
if (DeepSleepEnabled() && !deepsleep_flag && (Settings->tele_period == 10 || Settings->tele_period == 300 || millis() > 20000)) {
deepsleep_flag = DEEPSLEEP_START_COUNTDOWN; // Start deepsleep in 4 seconds
}
break;
case FUNC_COMMAND:
result = DecodeCommand(kDeepsleepCommands, DeepsleepCommand);
break;
case FUNC_PRE_INIT:
DeepSleepReInit();
break;
}
return result;
}
#endif //USE_DEEPSLEEP