mirror of https://github.com/arendst/Tasmota.git
98 lines
3.5 KiB
Python
98 lines
3.5 KiB
Python
# From: https://github.com/letscontrolit/ESPEasy/blob/mega/tools/pio/post_esp32.py
|
|
# Thanks TD-er :)
|
|
|
|
Import("env")
|
|
import os
|
|
|
|
def decode_flash_size_speed(byte_value):
|
|
speed = byte_value[0] & 0x0f
|
|
size = (byte_value[0] & 0xf0) / 16
|
|
|
|
spi_speed = {
|
|
0: "40",
|
|
1: "26",
|
|
2: "20",
|
|
0xf: "80"
|
|
}
|
|
speed_mhz = spi_speed.get(speed)
|
|
size_mb = str(1<<int(size))
|
|
|
|
return "0x{}: {}MHz, {}MB".format(byte_value.hex(), speed_mhz, size_mb)
|
|
|
|
|
|
def esp32_create_factory_bin(source, target, env):
|
|
#print("Generating one file initial flash firmware for esp32")
|
|
|
|
offset = 0x0
|
|
flash_page_size = 256
|
|
|
|
# The offset from begin of the file where the app0 partition starts
|
|
# This is defined in the partition .csv file
|
|
sketch_partition_start = 0x10000
|
|
|
|
# Typical layout of the generated file:
|
|
# Offset | File
|
|
# - 0x1000 | ~\.platformio\packages\framework-arduinoespressif32\tools\sdk\esp32\bin\bootloader_dout_40m.bin
|
|
# - 0x8000 | ~\Tasmota\.pio\build\<env name>\partitions.bin
|
|
# - 0xe000 | ~\.platformio\packages\framework-arduinoespressif32\tools\partitions\boot_app0.bin
|
|
# - 0x10000 | ~\Tasmota\.pio\build\<env name>/firmware.bin
|
|
|
|
new_file_name = env.subst("$BUILD_DIR/${PROGNAME}.factory.bin")
|
|
sections = env.subst(env.get('FLASH_EXTRA_IMAGES'))
|
|
new_file = open(new_file_name,"wb")
|
|
new_file.truncate() # Make sure no left over data is present from a previous build
|
|
|
|
firmware_name = env.subst("$BUILD_DIR/${PROGNAME}.bin")
|
|
|
|
# fill the file with 0xFF binary data to reflect 'erased and not yet written' data.
|
|
# Make sure to use exactly the size that normally would be erased
|
|
new_file.seek(0)
|
|
total_size = sketch_partition_start + os.path.getsize(firmware_name)
|
|
total_size = total_size - (total_size % flash_page_size) + flash_page_size
|
|
|
|
new_file.write(bytes([0xff] * total_size))
|
|
|
|
print(" {} | {}".format("Offset", "File"))
|
|
for section in sections:
|
|
sect_adr,sect_file = section.split(" ",1)
|
|
print(" - {} | {}".format(sect_adr,sect_file))
|
|
source = open(sect_file,"rb")
|
|
new_file.seek(int(sect_adr,0)-offset)
|
|
new_file.write(source.read())
|
|
if "bootloader" in sect_file:
|
|
# Need to patch the bootloader to match the flash size
|
|
flash_size = env.BoardConfig().get("upload.flash_size")
|
|
|
|
spi_speed_size_byte_offset = 3
|
|
source.seek(spi_speed_size_byte_offset)
|
|
spi_speed_size_byte = source.read(1)
|
|
new_spi_speed_size_byte = spi_speed_size_byte[0] & 0x0f
|
|
|
|
spi_size = {
|
|
"1MB": 0x00,
|
|
"2MB": 0x10,
|
|
"4MB": 0x20,
|
|
"8MB": 0x30,
|
|
"16MB": 0x40
|
|
}
|
|
new_spi_speed_size_byte |= spi_size.get(flash_size, spi_speed_size_byte[0] & 0xf0)
|
|
|
|
if new_spi_speed_size_byte != spi_speed_size_byte:
|
|
new_byte = bytes([new_spi_speed_size_byte])
|
|
print(" | Patch flash size value {} -> {}".format(decode_flash_size_speed(spi_speed_size_byte), decode_flash_size_speed(new_byte)))
|
|
new_file.seek(int(sect_adr,0)-offset + spi_speed_size_byte_offset)
|
|
new_file.write(new_byte)
|
|
|
|
source.close()
|
|
|
|
|
|
firmware_start = sketch_partition_start-offset
|
|
firmware = open(firmware_name,"rb")
|
|
print(" - {} | {}".format(hex(firmware_start),firmware_name))
|
|
new_file.seek(firmware_start)
|
|
new_file.write(firmware.read())
|
|
new_file.close()
|
|
firmware.close()
|
|
|
|
env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", esp32_create_factory_bin)
|