mirror of https://github.com/arendst/Tasmota.git
78 lines
2.2 KiB
Plaintext
78 lines
2.2 KiB
Plaintext
#-
|
|
- I2C driver for the Touch Screen driver CHSC6540 of the M5Stack Tough
|
|
-
|
|
- This is based on
|
|
- https://github.com/m5stack/M5Tough/blob/master/src/M5Touch.cpp
|
|
- https://github.com/m5stack/M5Tough/blob/master/src/M5Touch.h
|
|
-#
|
|
|
|
class CHSC6540 : I2C_Driver
|
|
var tp_int # gpio used as INT - going low when the screen is touched
|
|
# prevous values
|
|
var touched, x, y # previous values (bool, int, int) to be repeated when not touched
|
|
|
|
def init()
|
|
# set current values
|
|
self.x = 0
|
|
self.y = 0
|
|
self.touched = false
|
|
|
|
self.tp_int = gpio.pin(gpio.INTERRUPT, 0)
|
|
super(self).init("CHSC6540", 0x2E)
|
|
|
|
tasmota.add_driver(self)
|
|
# check that display is present
|
|
import introspect
|
|
if !introspect.module("display")
|
|
tasmota.log("I2C: can't start CHSC6540 without display enabled", 3)
|
|
self.wire = nil
|
|
end
|
|
|
|
if self.tp_int < 0
|
|
tasmota.log("I2C: can't start CHSC6540 without INTERRUPT-1 gpio configured", 3)
|
|
self.wire = nil
|
|
else
|
|
gpio.pin_mode(self.tp_int, gpio.INPUT_PULLUP)
|
|
end
|
|
|
|
# all good, configure device
|
|
if self.wire
|
|
self.write8(0x5A, 0x5A) # INT mode change
|
|
|
|
tasmota.add_driver(self)
|
|
end
|
|
end
|
|
|
|
# is the screen pressed - i.e. TP_INT is low
|
|
def is_pressed()
|
|
if self.wire == nil return end
|
|
return gpio.digital_read(self.tp_int) == 0
|
|
end
|
|
|
|
def every_50ms()
|
|
if self.wire == nil return end
|
|
|
|
self.touched = self.is_pressed()
|
|
# tasmota.log("DEBUG> int="+str(self.tp_int)+" touched="+str(self.touched), 2)
|
|
if self.touched
|
|
var raw_read = self.wire.read_bytes(self.addr, 0x02, 11) # read a series of 11 bytes at from register 0x02
|
|
var pts = raw_read[0]
|
|
if pts <= 0 || pts > 2 return end # wrong
|
|
# supports multi-touch
|
|
#var p0f = (raw_read[4] & 0x10) != 0 # unused for now
|
|
self.x = raw_read.get(1,-2) & 0x0FFF
|
|
self.y = raw_read.get(3,-2) & 0x0FFF
|
|
# tasmota.log(format("I2C: screen pressed x=%i y=%i", self.x, self.y), 2)
|
|
# var p1x = raw_read.get(7,2) & 0x0FFF
|
|
# var p1y = raw_read.get(9,2) & 0x0FFF
|
|
end
|
|
|
|
# return values
|
|
import display
|
|
display.touch_update(self.touched ? 1 : 0, self.x, self.y, 0)
|
|
end
|
|
|
|
end
|
|
|
|
return CHSC6540()
|