Tasmota/tasmota/language/ru_RU.h

1028 lines
44 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
ru-RU.h - localization for Russian - Rissia for Tasmota
Copyright (C) 2021 Theo Arends / roman-vn
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _LANGUAGE_RU_RU_H_
#define _LANGUAGE_RU_RU_H_
/*************************** ATTENTION *******************************\
*
* Due to memory constraints only UTF-8 is supported.
* To save code space keep text as short as possible.
* Time and Date provided by SDK can not be localized (yet).
* Use online command StateText to translate ON, OFF, HOLD and TOGGLE.
* Use online command Prefix to translate cmnd, stat and tele.
*
* Updated until v5.12.0b
\*********************************************************************/
//#define LANGUAGE_MODULE_NAME // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English)
#define LANGUAGE_LCID 1049
// HTML (ISO 639-1) Language Code
#define D_HTML_LANGUAGE "ru"
// "2017-03-07T11:08:02" - ISO8601:2004
#define D_YEAR_MONTH_SEPARATOR "-"
#define D_MONTH_DAY_SEPARATOR "-"
#define D_DATE_TIME_SEPARATOR "T"
#define D_HOUR_MINUTE_SEPARATOR ":"
#define D_MINUTE_SECOND_SEPARATOR ":"
#define D_DAY3LIST "ВскПонВтрСрдЧетПятСуб"
#define D_MONTH3LIST "ЯнвФевМарАпрМайИюнИюлАвгСенОктНояДек"
// Non JSON decimal separator
#define D_DECIMAL_SEPARATOR ","
// Common
#define D_ADMIN "Admin"
#define D_AIR_QUALITY "Качество воздуха"
#define D_AP "AP" // Access Point
#define D_AS "как"
#define D_AUTO "АВТО"
#define D_BATT "Batt" // Short for Battery
#define D_BLINK "Мигать"
#define D_BLINKOFF "Не Мигать"
#define D_BOOT_COUNT "Количество загрузок"
#define D_BRIGHTLIGHT "Яркость"
#define D_BSSID "BSSId"
#define D_BUTTON "Кнопка"
#define D_BY "by" // Written by me
#define D_BYTES "Байт"
#define D_CELSIUS "Цельсия"
#define D_CHANNEL "Channel"
#define D_CO2 "Углекислый газ"
#define D_CODE "код" // Button code
#define D_COLDLIGHT "Холодный"
#define D_COMMAND "Команда"
#define D_CONNECTED "Соединен"
#define D_CORS_DOMAIN "CORS Domain"
#define D_COUNT "Подсчет"
#define D_COUNTER "Счетчик"
#define D_CT_POWER "CT Power"
#define D_CURRENT "Ток" // As in Voltage and Current
#define D_DATA "Данные"
#define D_DARKLIGHT "Темный"
#define D_DEBUG "Отладка"
#define D_DEWPOINT "Dew point"
#define D_DISABLED "Блокирован"
#define D_DISTANCE "Distance"
#define D_DNS_SERVER "DNS Сервер"
#define D_DO "Disolved Oxygen"
#define D_DONE "Выполнено"
#define D_DST_TIME "DST"
#define D_EC "EC"
#define D_ECO2 "eCO₂"
#define D_EMULATION "Эмуляция"
#define D_ENABLED "Активно"
#define D_ERASE "Стирать"
#define D_ERROR "Ошибка"
#define D_FAHRENHEIT "Фаренгейт"
#define D_FAILED "Неудачно"
#define D_FALLBACK "Обратная связь"
#define D_FALLBACK_TOPIC "Топик обратной связи"
#define D_FALSE "Ложно"
#define D_FILE "Файл"
#define D_FLOW_RATE "Flow rate"
#define D_FRAGMENTATION "frag." // Lower case abbreviated version of fragmentation used in "memory fragmentation"
#define D_FREE_MEMORY "Свободная память"
#define D_PSR_MAX_MEMORY "PS-RAM Memory"
#define D_PSR_FREE_MEMORY "PS-RAM free Memory"
#define D_FREQUENCY "Frequency"
#define D_GAS "Газ"
#define D_GATEWAY "Шлюз"
#define D_GROUP "Группа"
#define D_HOST "Хост"
#define D_HOSTNAME "Имя Хоста"
#define D_HUMIDITY "Влажность"
#define D_ILLUMINANCE "Освещенность"
#define D_IMMEDIATE "немедленно" // Button immediate
#define D_INDEX "Индекс"
#define D_INFO "Инфо"
#define D_INFRARED "Infrared"
#define D_INITIALIZED "Инициализировано"
#define D_IP_ADDRESS "IP Адрес"
#define D_LIGHT "Свет"
#define D_LWT "LWT"
#define D_LQI "LQI" // Zigbee Link Quality Index
#define D_MODULE "Модуль"
#define D_MOISTURE "Moisture"
#define D_MQTT "MQTT"
#define D_MULTI_PRESS "многократное нажатие"
#define D_NOISE "Шум"
#define D_NONE "Нет"
#define D_O2 "Oxygen"
#define D_OFF "Выкл"
#define D_OFFLINE "Офф-лайн"
#define D_OK "Ок"
#define D_ON "Вкл"
#define D_ONLINE "Он-лайн"
#define D_ORP "ORP"
#define D_PASSWORD "Пароль"
#define D_PH "pH"
#define D_PORT "Порт"
#define D_POWER_FACTOR "Коэффициент Мощности"
#define D_POWERUSAGE "Мощность"
#define D_POWERUSAGE_ACTIVE "Active Power"
#define D_POWERUSAGE_APPARENT "Apparent Power"
#define D_POWERUSAGE_REACTIVE "Reactive Power"
#define D_PRESSURE "Давление"
#define D_PRESSUREATSEALEVEL "Давление на уровне моря"
#define D_PROGRAM_FLASH_SIZE "Размер Flash для программ"
#define D_PROGRAM_SIZE "Размер программы "
#define D_PROJECT "Проект"
#define D_RAIN "Rain"
#define D_RANGE "Range"
#define D_RECEIVED "Получено"
#define D_RESTART "Перезапуск"
#define D_RESTARTING "Перезапуск"
#define D_RESTART_REASON "Причина перезагрузки"
#define D_RESTORE "восстановление"
#define D_RETAINED "нераспред."
#define D_RULE "Rule"
#define D_SAVE "Сохранить"
#define D_SENSOR "Датчик"
#define D_SSID "SSId"
#define D_START "Старт"
#define D_STD_TIME "STD"
#define D_STOP "Стоп"
#define D_SUBNET_MASK "Маска Подсети"
#define D_SUBSCRIBE_TO "Подписаться на"
#define D_UNSUBSCRIBE_FROM "Unsubscribe from"
#define D_SUCCESSFUL "Успешно"
#define D_SUNRISE "Sunrise"
#define D_SUNSET "Sunset"
#define D_TEMPERATURE "Температура"
#define D_TO "до"
#define D_TOGGLE "Переключить"
#define D_TOPIC "Топик"
#define D_TOTAL_USAGE "Total Usage"
#define D_TRANSMIT "Передать"
#define D_TRUE "Истина"
#define D_TVOC "TVOC"
#define D_UPGRADE "обновление"
#define D_UPLOAD "Загрузить"
#define D_UPTIME "Uptime"
#define D_USER "Пользователь"
#define D_UTC_TIME "UTC"
#define D_UV_INDEX "UV Index"
#define D_UV_INDEX_1 "Low"
#define D_UV_INDEX_2 "Mid"
#define D_UV_INDEX_3 "High"
#define D_UV_INDEX_4 "Danger"
#define D_UV_INDEX_5 "BurnL1/2"
#define D_UV_INDEX_6 "BurnL3"
#define D_UV_INDEX_7 "OoR"
#define D_UV_LEVEL "УФ уровень"
#define D_UV_POWER "UV Power"
#define D_VERSION "Версия"
#define D_VOLTAGE "Напряжение"
#define D_VOLUME "Volume"
#define D_WEIGHT "Weight"
#define D_WARMLIGHT "Тепло"
#define D_WEB_SERVER "Web сервер"
// tasmota.ino
#define D_WARNING_MINIMAL_VERSION "ПРЕДУПРЕЖДЕНИЕ Эта версия не поддерживает персистентные настройки"
#define D_LEVEL_10 "уровень 1-0"
#define D_LEVEL_01 "уровень 0-1"
#define D_SERIAL_LOGGING_DISABLED "Serial logging отключен"
#define D_SYSLOG_LOGGING_REENABLED "Syslog logging включен"
#define D_SET_BAUDRATE_TO "Установить скорость передачи (Baudrate)"
#define D_RECEIVED_TOPIC "Полученный Топик"
#define D_DATA_SIZE "Размер данных"
#define D_ANALOG_INPUT "Аналоговый вход"
// support.ino
#define D_OSWATCH "osWatch"
#define D_BLOCKED_LOOP "Блокирующий цикл"
#define D_WPS_FAILED_WITH_STATUS "WPS конфигурация НЕУДАЧНА со статусом"
#define D_ACTIVE_FOR_3_MINUTES "активен в течение 3 минут"
#define D_FAILED_TO_START "не удалось запустить"
#define D_PATCH_ISSUE_2186 "Проблема с исправлением 2186"
#define D_CONNECTING_TO_AP "Подключение к AP"
#define D_IN_MODE "в режиме"
#define D_CONNECT_FAILED_NO_IP_ADDRESS "Ошибка подключения, IP-адрес не получен"
#define D_CONNECT_FAILED_AP_NOT_REACHED "Ошибка соединения, AP не может быть достигнута"
#define D_CONNECT_FAILED_WRONG_PASSWORD "Ошибка соединения"
#define D_CONNECT_FAILED_AP_TIMEOUT "Ошибка соединения с AP по тайм-ауту"
#define D_ATTEMPTING_CONNECTION "Попытка подключения..."
#define D_CHECKING_CONNECTION "Проверка соединения..."
#define D_QUERY_DONE "Запрос выполнен. Обнаружены службы MQTT"
#define D_MQTT_SERVICE_FOUND "MQTT сервис service найдено"
#define D_FOUND_AT "найдено в"
#define D_SYSLOG_HOST_NOT_FOUND "System лог хост не найден"
// settings.ino
#define D_SAVED_TO_FLASH_AT "Сохранено во флэш-память"
#define D_LOADED_FROM_FLASH_AT "Загружено из флэш-памяти"
#define D_USE_DEFAULTS "Использовать значение по умолчанию"
#define D_ERASED_SECTOR "Стереть сектор"
// xdrv_02_webserver.ino
#define D_NOSCRIPT "To use Tasmota, please enable JavaScript"
#define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "Прошивка MINIMAL<br>пожалуйста обновите"
#define D_WEBSERVER_ACTIVE_ON "Веб-сервер активен"
#define D_WITH_IP_ADDRESS "с IP-адресом"
#define D_WEBSERVER_STOPPED "Веб-сервер остановлен"
#define D_FILE_NOT_FOUND "Файл не найден"
#define D_REDIRECTED "Перенаправлено на адаптивный портал"
#define D_WIFIMANAGER_SET_ACCESSPOINT_AND_STATION "Wifi менеджер устанавливает Точку Доступа и сохраняет станцию"
#define D_WIFIMANAGER_SET_ACCESSPOINT "Wifi менеджер установил Точку Доступа"
#define D_TRYING_TO_CONNECT "Попытка подключения устройства к сети"
#define D_RESTART_IN "Перезапуск"
#define D_SECONDS "секунд"
#define D_DEVICE_WILL_RESTART "Устройство будет перезапущено через несколько секунд"
#define D_BUTTON_TOGGLE "Переключить"
#define D_CONFIGURATION "Конфигурация"
#define D_INFORMATION "Информация"
#define D_FIRMWARE_UPGRADE "Обновление прошивки"
#define D_CONSOLE "Консоль"
#define D_CONFIRM_RESTART "Подтвердить перезагрузку"
#define D_CONFIGURE_MODULE "Конфигурация Модуля"
#define D_CONFIGURE_WIFI "Конфигурация WiFi"
#define D_CONFIGURE_MQTT "Конфигурация MQTT"
#define D_CONFIGURE_DOMOTICZ "Конфигурация Domoticz"
#define D_CONFIGURE_LOGGING "Конфигурация Logging"
#define D_CONFIGURE_OTHER "Конфигурация прочее"
#define D_CONFIRM_RESET_CONFIGURATION "Подтвердить Сброс Конфигурации"
#define D_RESET_CONFIGURATION "Сброс Конфигурации"
#define D_BACKUP_CONFIGURATION "Резервное копирование Конфигурации"
#define D_RESTORE_CONFIGURATION "Восстановление Конфигурации"
#define D_MAIN_MENU "Главное Меню"
#define D_MODULE_PARAMETERS "Параметры модуля"
#define D_MODULE_TYPE "Тип модуля"
#define D_PULLUP_ENABLE "No Button/Switch pull-up"
#define D_ADC "ADC"
#define D_GPIO "GPIO"
#define D_SERIAL_IN "Serial вход"
#define D_SERIAL_OUT "Serial выход"
#define D_WIFI_PARAMETERS "Параметры Wifi"
#define D_SCAN_FOR_WIFI_NETWORKS "Сканирование беспроводных сетей Wifi"
#define D_SCAN_DONE "Сканирование завершено"
#define D_NO_NETWORKS_FOUND "Не найдено сетей"
#define D_REFRESH_TO_SCAN_AGAIN "Обновить для повторного сканирования"
#define D_DUPLICATE_ACCESSPOINT "Дублировать Точку Доступа (AP)"
#define D_SKIPPING_LOW_QUALITY "Пропущено из-за низкого качества"
#define D_RSSI "RSSI"
#define D_WEP "WEP"
#define D_WPA_PSK "WPA PSK"
#define D_WPA2_PSK "WPA2 PSK"
#define D_AP1_SSID "AP1 SSId"
#define D_AP1_PASSWORD "AP1 Пароль"
#define D_AP2_SSID "AP2 SSId"
#define D_AP2_PASSWORD "AP2 Пароль"
#define D_MQTT_PARAMETERS "Параметры MQTT"
#define D_CLIENT "Клиент"
#define D_FULL_TOPIC "Полный Топик"
#define D_LOGGING_PARAMETERS "Параметры Logging"
#define D_SERIAL_LOG_LEVEL "Serial лог уровень"
#define D_MQTT_LOG_LEVEL "Mqtt log level"
#define D_WEB_LOG_LEVEL "Web лог уровень"
#define D_SYS_LOG_LEVEL "System лог уровень"
#define D_MORE_DEBUG "Дополнительная информация для отладки"
#define D_SYSLOG_HOST "System лог хост"
#define D_SYSLOG_PORT "System лог порт"
#define D_TELEMETRY_PERIOD "Период телеметрии"
#define D_OTHER_PARAMETERS "Параметры Прочие"
#define D_TEMPLATE "Template"
#define D_ACTIVATE "Activate"
#define D_DEVICE_NAME "Device Name"
#define D_WEB_ADMIN_PASSWORD "Пароль Web администратора"
#define D_MQTT_ENABLE "MQTT активен"
#define D_MQTT_TLS_ENABLE "MQTT TLS"
#define D_FRIENDLY_NAME "Дружественное Имя"
#define D_BELKIN_WEMO "Belkin WeMo"
#define D_HUE_BRIDGE "Hue Bridge"
#define D_SINGLE_DEVICE "одиночное"
#define D_MULTI_DEVICE "мульти"
#define D_CONFIGURE_TEMPLATE "Конфигурация Template"
#define D_TEMPLATE_PARAMETERS "Параметры Template"
#define D_TEMPLATE_NAME "Name"
#define D_BASE_TYPE "Based on"
#define D_TEMPLATE_FLAGS "Options"
#define D_SAVE_CONFIGURATION "Сохранить конфигурацию"
#define D_CONFIGURATION_SAVED "Конфигурация сохранена "
#define D_CONFIGURATION_RESET "Конфигурация сброшена"
#define D_PROGRAM_VERSION "Версия программы"
#define D_BUILD_DATE_AND_TIME "Дата & Время сборки"
#define D_CORE_AND_SDK_VERSION "Версия Core/SDK"
#define D_FLASH_WRITE_COUNT "Кол-во записей Flash"
#define D_MAC_ADDRESS "MAC Адрес"
#define D_MQTT_HOST "MQTT Хост"
#define D_MQTT_PORT "MQTT Порт"
#define D_MQTT_CLIENT "MQTT Клиент ID"
#define D_MQTT_USER "MQTT Пользователь"
#define D_MQTT_TOPIC "MQTT Топик"
#define D_MQTT_GROUP_TOPIC "MQTT Топик группы"
#define D_MQTT_FULL_TOPIC "MQTT Топик полный"
#define D_MQTT_NO_RETAIN "MQTT No Retain"
#define D_MDNS_DISCOVERY "mDNS Обнаружение"
#define D_MDNS_ADVERTISE "mDNS Транcляция"
#define D_ESP_CHIP_ID "ID чипа ESP"
#define D_FLASH_CHIP_ID "ID чипа Flash памяти"
#define D_FLASH_CHIP_SIZE "Размер Flash памяти"
#define D_FREE_PROGRAM_SPACE "Свободное пространство программ"
#define D_UPGRADE_BY_WEBSERVER "Обновление через Веб-сервер"
#define D_OTA_URL "OTA Url"
#define D_START_UPGRADE "Начать обновление"
#define D_UPGRADE_BY_FILE_UPLOAD "Обновление путем загрузки файлов"
#define D_UPLOAD_STARTED "Загрузка началась"
#define D_UPGRADE_STARTED "Обновление началось"
#define D_UPLOAD_DONE "Загрузка завершена"
#define D_UPLOAD_TRANSFER "Upload transfer"
#define D_TRANSFER_STARTED "Transfer started"
#define D_UPLOAD_ERR_1 "Файл не выбран"
#define D_UPLOAD_ERR_2 "Недостаточно места"
#define D_UPLOAD_ERR_3 "Invalid file signature"
#define D_UPLOAD_ERR_4 "Размер прошивки больше, чем реальный размер флеш памяти"
#define D_UPLOAD_ERR_5 "Ошибка загрузки буфера"
#define D_UPLOAD_ERR_6 "Ошибка загрузки. Включено лог уровня 3"
#define D_UPLOAD_ERR_7 "Загрузка прервана"
#define D_UPLOAD_ERR_8 "Файл неверный"
#define D_UPLOAD_ERR_9 "Слишком большой файл"
#define D_UPLOAD_ERR_10 "Failed to init RF chip"
#define D_UPLOAD_ERR_11 "Failed to erase RF chip"
#define D_UPLOAD_ERR_12 "Failed to write to RF chip"
#define D_UPLOAD_ERR_13 "Failed to decode RF firmware"
#define D_UPLOAD_ERR_14 "Not compatible"
#define D_UPLOAD_ERROR_CODE "Код ошибки загрузки"
#define D_ENTER_COMMAND "Введите команду"
#define D_ENABLE_WEBLOG_FOR_RESPONSE "Включить Веб лог уровня 2 если ожидается ответ"
#define D_NEED_USER_AND_PASSWORD "Ожидается user=<username>&password=<password>"
// xdrv_01_mqtt.ino
#define D_FINGERPRINT "Проверка TLS Fingerprint..."
#define D_TLS_CONNECT_FAILED_TO "Сбой подключения TLS к"
#define D_RETRY_IN "Повторить"
#define D_VERIFIED "Проверено Fingerprint"
#define D_INSECURE "Небезопасное соединение, недействительный Fingerprint"
#define D_CONNECT_FAILED_TO "Ошибка подключения к"
// xplg_wemohue.ino
#define D_MULTICAST_DISABLED "Multicast отключен"
#define D_MULTICAST_REJOINED "Multicast (ре)соединился"
#define D_MULTICAST_JOIN_FAILED "Multicast ошибка соединения"
#define D_FAILED_TO_SEND_RESPONSE "Не удалось отправить ответ"
#define D_WEMO "WeMo"
#define D_WEMO_BASIC_EVENT "WeMo основное событие"
#define D_WEMO_EVENT_SERVICE "WeMo служба событий"
#define D_WEMO_META_SERVICE "WeMo мета-сервис"
#define D_WEMO_SETUP "WeMo настройка"
#define D_RESPONSE_SENT "Ответ отправлен"
#define D_HUE "Hue"
#define D_HUE_BRIDGE_SETUP "Hue настройка"
#define D_HUE_API_NOT_IMPLEMENTED "Hue API не реализовано"
#define D_HUE_API "Hue API"
#define D_HUE_POST_ARGS "Hue POST args"
#define D_3_RESPONSE_PACKETS_SENT "3 ответных пакета получено"
// xdrv_07_domoticz.ino
#define D_DOMOTICZ_PARAMETERS "Параметры Domoticz"
#define D_DOMOTICZ_IDX "Idx"
#define D_DOMOTICZ_KEY_IDX "Key idx"
#define D_DOMOTICZ_SWITCH_IDX "Switch idx"
#define D_DOMOTICZ_SENSOR_IDX "Sensor idx"
#define D_DOMOTICZ_TEMP "Temp"
#define D_DOMOTICZ_TEMP_HUM "Temp,Hum"
#define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Hum,Baro"
#define D_DOMOTICZ_POWER_ENERGY "Power,Energy"
#define D_DOMOTICZ_ILLUMINANCE "Illuminance"
#define D_DOMOTICZ_COUNT "Count/PM1"
#define D_DOMOTICZ_VOLTAGE "Voltage/PM2,5"
#define D_DOMOTICZ_CURRENT "Current/PM10"
#define D_DOMOTICZ_AIRQUALITY "AirQuality"
#define D_DOMOTICZ_P1_SMART_METER "P1SmartMeter"
#define D_DOMOTICZ_UPDATE_TIMER "Update timer"
// xdrv_09_timers.ino
#define D_CONFIGURE_TIMER "Конфигурация Timer"
#define D_TIMER_PARAMETERS "Параметры Timer"
#define D_TIMER_ENABLE "Enable Timers"
#define D_TIMER_ARM "Arm"
#define D_TIMER_TIME "Time"
#define D_TIMER_DAYS "Days"
#define D_TIMER_REPEAT "Repeat"
#define D_TIMER_OUTPUT "Output"
#define D_TIMER_ACTION "Action"
// xdrv_10_knx.ino
#define D_CONFIGURE_KNX "Конфигурация KNX"
#define D_KNX_PARAMETERS "Параметры KNX"
#define D_KNX_GENERAL_CONFIG "General"
#define D_KNX_PHYSICAL_ADDRESS "Physical Address"
#define D_KNX_PHYSICAL_ADDRESS_NOTE "( Must be unique on the KNX network )"
#define D_KNX_ENABLE "Enable KNX"
#define D_KNX_GROUP_ADDRESS_TO_WRITE "Data to Send to Group Addresses"
#define D_ADD "Add"
#define D_DELETE "Delete"
#define D_REPLY "Reply"
#define D_KNX_GROUP_ADDRESS_TO_READ "Group Addresses to Receive Data from"
#define D_RECEIVED_FROM "Received from"
#define D_KNX_COMMAND_WRITE "Write"
#define D_KNX_COMMAND_READ "Read"
#define D_KNX_COMMAND_OTHER "Other"
#define D_SENT_TO "sent to"
#define D_KNX_WARNING "The group address ( 0 / 0 / 0 ) is reserved and can not be used."
#define D_KNX_ENHANCEMENT "Communication Enhancement"
#define D_KNX_TX_SLOT "KNX TX"
#define D_KNX_RX_SLOT "KNX RX"
#define D_KNX_TX_SCENE "KNX SCENE TX"
#define D_KNX_RX_SCENE "KNX SCENE RX"
// xdrv_23_zigbee
#define D_ZIGBEE_PERMITJOIN_ACTIVE "Devices allowed to join"
#define D_ZIGBEE_MAPPING_TITLE "Tasmota Zigbee Mapping"
#define D_ZIGBEE_NOT_STARTED "Zigbee not started"
#define D_ZIGBEE_MAPPING_IN_PROGRESS_SEC "Mapping in progress (%d s. remaining)"
#define D_ZIGBEE_MAPPING_NOT_PRESENT "No mapping"
#define D_ZIGBEE_MAP_REFRESH "Zigbee Map Refresh"
#define D_ZIGBEE_MAP "Zigbee Map"
#define D_ZIGBEE_PERMITJOIN "Zigbee Permit Join"
#define D_ZIGBEE_GENERATE_KEY "generating random Zigbee network key"
#define D_ZIGBEE_UNKNOWN_DEVICE "Unknown device"
#define D_ZIGBEE_UNKNOWN_ATTRIBUTE "Unknown attribute"
#define D_ZIGBEE_INVALID_PARAM "Invalid parameter"
#define D_ZIGBEE_MISSING_PARAM "Missing parameters"
#define D_ZIGBEE_UNKNWON_ATTRIBUTE "Unknown attribute name (ignored): %s"
#define D_ZIGBEE_TOO_MANY_CLUSTERS "No more than one cluster id per command"
#define D_ZIGBEE_WRONG_DELIMITER "Wrong delimiter for payload"
#define D_ZIGBEE_UNRECOGNIZED_COMMAND "Unrecognized zigbee command: %s"
#define D_ZIGBEE_TOO_MANY_COMMANDS "Only 1 command allowed (%d)"
#define D_ZIGBEE_NO_ATTRIBUTE "No attribute in list"
#define D_ZIGBEE_UNSUPPORTED_ATTRIBUTE_TYPE "Unsupported attribute type"
#define D_ZIGBEE_JSON_REQUIRED "Config requires JSON objects"
#define D_ZIGBEE_RESET_1_OR_2 "1 or 2 to reset"
#define D_ZIGBEE_EEPROM_FOUND_AT_ADDRESS "ZBBridge EEPROM found at address"
#define D_ZIGBEE_RANDOMIZING_ZBCONFIG "Randomizing Zigbee parameters, please check with 'ZbConfig'"
// xdrv_03_energy.ino
#define D_ENERGY_TODAY "Энергия Сегодня"
#define D_ENERGY_YESTERDAY "Энергия Вчера"
#define D_ENERGY_TOTAL "Энергия Всего"
// xdrv_27_shutter.ino
#define D_OPEN "Open"
#define D_CLOSE "Close"
#define D_DOMOTICZ_SHUTTER "Shutter"
// xdrv_28_pcf8574.ino
#define D_CONFIGURE_PCF8574 "Configure PCF8574"
#define D_PCF8574_PARAMETERS "PCF8574 parameters"
#define D_INVERT_PORTS "Invert Ports"
#define D_DEVICE "Device"
#define D_DEVICE_INPUT "Input"
#define D_DEVICE_OUTPUT "Output"
// xsns_05_ds18b20.ino
#define D_SENSOR_BUSY "Датчик DS18x20 занят"
#define D_SENSOR_CRC_ERROR "Датчик DS18x20 - ошибка CRC"
#define D_SENSORS_FOUND "Датчик DS18x20 найден"
// xsns_06_dht.ino
#define D_TIMEOUT_WAITING_FOR "Тайм-аут, в ожидании"
#define D_START_SIGNAL_LOW "сигнал старт низкий"
#define D_START_SIGNAL_HIGH "сигнал старт высокий"
#define D_PULSE "пульс"
#define D_CHECKSUM_FAILURE "Ошибка контрольной суммы"
// xsns_07_sht1x.ino
#define D_SENSOR_DID_NOT_ACK_COMMAND "Датчик не получил команду ACK"
#define D_SHT1X_FOUND "SHT1X найден"
// xsns_18_pms5003.ino
#define D_STANDARD_CONCENTRATION "CF-1 PM" // Standard Particle CF-1 Particle Matter
#define D_ENVIRONMENTAL_CONCENTRATION "PM" // Environmetal Particle Matter
#define D_PARTICALS_BEYOND "Particals"
// xsns_27_apds9960.ino
#define D_GESTURE "Gesture"
#define D_COLOR_RED "Red"
#define D_COLOR_GREEN "Green"
#define D_COLOR_BLUE "Blue"
#define D_CCT "CCT"
#define D_PROXIMITY "Proximity"
// xsns_32_mpu6050.ino
#define D_AX_AXIS "Accel. X-Axis"
#define D_AY_AXIS "Accel. Y-Axis"
#define D_AZ_AXIS "Accel. Z-Axis"
#define D_GX_AXIS "Gyro X-Axis"
#define D_GY_AXIS "Gyro Y-Axis"
#define D_GZ_AXIS "Gyro Z-Axis"
// xsns_34_hx711.ino
#define D_HX_CAL_REMOVE "Remove weigth"
#define D_HX_CAL_REFERENCE "Load reference weigth"
#define D_HX_CAL_DONE "Calibrated"
#define D_HX_CAL_FAIL "Calibration failed"
#define D_RESET_HX711 "Reset Scale"
#define D_CONFIGURE_HX711 "Configure Scale"
#define D_HX711_PARAMETERS "Scale parameters"
#define D_ITEM_WEIGHT "Item weight"
#define D_REFERENCE_WEIGHT "Reference weigth"
#define D_CALIBRATE "Calibrate"
#define D_CALIBRATION "Calibration"
//xsns_35_tx20.ino
#define D_TX20_WIND_DIRECTION "Wind Direction"
#define D_TX20_WIND_SPEED "Wind Speed"
#define D_TX20_WIND_SPEED_MIN "Wind Speed Min"
#define D_TX20_WIND_SPEED_MAX "Wind Speed Max"
#define D_TX20_NORTH "N"
#define D_TX20_EAST "E"
#define D_TX20_SOUTH "S"
#define D_TX20_WEST "W"
// xsns_53_sml.ino
#define D_TPWRIN "Energy Total-In"
#define D_TPWROUT "Energy Total-Out"
#define D_TPWRCURR "Active Power-In/Out"
#define D_TPWRCURR1 "Active Power-In p1"
#define D_TPWRCURR2 "Active Power-In p2"
#define D_TPWRCURR3 "Active Power-In p3"
#define D_Strom_L1 "Current L1"
#define D_Strom_L2 "Current L2"
#define D_Strom_L3 "Current L3"
#define D_Spannung_L1 "Voltage L1"
#define D_Spannung_L2 "Voltage L2"
#define D_Spannung_L3 "Voltage L3"
#define D_METERNR "Meter_number"
#define D_METERSID "Service ID"
#define D_GasIN "Counter"
#define D_H2oIN "Counter"
#define D_StL1L2L3 "Current L1+L2+L3"
#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
// tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
#define D_SENSOR_NONE "-нет-"
#define D_SENSOR_USER "User"
#define D_SENSOR_OPTION "Option"
#define D_SENSOR_DHT11 "DHT11"
#define D_SENSOR_AM2301 "AM2301"
#define D_SENSOR_SI7021 "SI7021"
#define D_SENSOR_DS18X20 "DS18x20"
#define D_SENSOR_I2C_SCL "I2C SCL"
#define D_SENSOR_I2C_SDA "I2C SDA"
#define D_SENSOR_WS2812 "WS2812"
#define D_SENSOR_DFR562 "MP3 Player"
#define D_SENSOR_IRSEND "IRsend"
#define D_SENSOR_SWITCH "Свич" // Suffix "1"
#define D_SENSOR_BUTTON "Кнопка" // Suffix "1"
#define D_SENSOR_RELAY "Реле" // Suffix "1i"
#define D_SENSOR_LED "Led" // Suffix "1i"
#define D_SENSOR_LED_LINK "LedLink" // Suffix "i"
#define D_SENSOR_PWM "PWM" // Suffix "1"
#define D_SENSOR_COUNTER "Счетчик" // Suffix "1"
#define D_SENSOR_IRRECV "IRrecv"
#define D_SENSOR_MHZ_RX "MHZ Rx"
#define D_SENSOR_MHZ_TX "MHZ Tx"
#define D_SENSOR_PZEM004_RX "PZEM004 Rx"
#define D_SENSOR_PZEM016_RX "PZEM016 Rx"
#define D_SENSOR_PZEM017_RX "PZEM017 Rx"
#define D_SENSOR_PZEM0XX_TX "PZEM0XX Tx"
#define D_SENSOR_SAIR_RX "SAir Rx"
#define D_SENSOR_SAIR_TX "SAir Tx"
#define D_SENSOR_SPI_CS "SPI CS"
#define D_SENSOR_SPI_DC "SPI DC"
#define D_SENSOR_SPI_MISO "SPI MISO"
#define D_SENSOR_SPI_MOSI "SPI MOSI"
#define D_SENSOR_SPI_CLK "SPI CLK"
#define D_SENSOR_BACKLIGHT "Backlight"
#define D_SENSOR_PMS5003_TX "PMS5003 Tx"
#define D_SENSOR_PMS5003_RX "PMS5003 Rx"
#define D_SENSOR_SDS0X1_RX "SDS0X1 Rx"
#define D_SENSOR_SDS0X1_TX "SDS0X1 Tx"
#define D_SENSOR_HPMA_RX "HPMA Rx"
#define D_SENSOR_HPMA_TX "HPMA Tx"
#define D_SENSOR_SBR_RX "SerBr Rx"
#define D_SENSOR_SBR_TX "SerBr Tx"
#define D_SENSOR_SR04_TRIG "SR04 Tri/TX"
#define D_SENSOR_SR04_ECHO "SR04 Ech/RX"
#define D_SENSOR_SDM72_TX "SDM72 Tx"
#define D_SENSOR_SDM72_RX "SDM72 Rx"
#define D_SENSOR_SDM120_TX "SDMx20 Tx"
#define D_SENSOR_SDM120_RX "SDMx20 Rx"
#define D_SENSOR_SDM630_TX "SDM630 Tx"
#define D_SENSOR_SDM630_RX "SDM630 Rx"
#define D_SENSOR_WE517_TX "WE517 Tx"
#define D_SENSOR_WE517_RX "WE517 Rx"
#define D_SENSOR_TM1637_CLK "TM1637 CLK"
#define D_SENSOR_TM1637_DIO "TM1637 DIO"
#define D_SENSOR_TM1638_CLK "TM1638 CLK"
#define D_SENSOR_TM1638_DIO "TM1638 DIO"
#define D_SENSOR_TM1638_STB "TM1638 STB"
#define D_SENSOR_HX711_SCK "HX711 SCK"
#define D_SENSOR_HX711_DAT "HX711 DAT"
#define D_SENSOR_FTC532 "FTC532"
#define D_SENSOR_BS814_CLK "BS814 CLK"
#define D_SENSOR_BS814_DAT "BS814 DAT"
#define D_SENSOR_TX2X_TX "TX2x"
#define D_SENSOR_RFSEND "RFSend"
#define D_SENSOR_RFRECV "RFrecv"
#define D_SENSOR_TUYA_TX "Tuya Tx"
#define D_SENSOR_TUYA_RX "Tuya Rx"
#define D_SENSOR_MGC3130_XFER "MGC3130 Xfr"
#define D_SENSOR_MGC3130_RESET "MGC3130 Rst"
#define D_SENSOR_SSPI_MISO "SSPI MISO"
#define D_SENSOR_SSPI_MOSI "SSPI MOSI"
#define D_SENSOR_SSPI_SCLK "SSPI SCLK"
#define D_SENSOR_SSPI_CS "SSPI CS"
#define D_SENSOR_SSPI_DC "SSPI DC"
#define D_SENSOR_RF_SENSOR "RF Sensor"
#define D_SENSOR_AZ_RX "AZ Rx"
#define D_SENSOR_AZ_TX "AZ Tx"
#define D_SENSOR_MAX31855_CS "MX31855 CS"
#define D_SENSOR_MAX31855_CLK "MX31855 CLK"
#define D_SENSOR_MAX31855_DO "MX31855 DO"
#define D_SENSOR_MAX31865_CS "MX31865 CS"
#define D_SENSOR_NRG_SEL "HLWBL SEL" // Suffix "i"
#define D_SENSOR_NRG_CF1 "HLWBL CF1"
#define D_SENSOR_HLW_CF "HLW8012 CF"
#define D_SENSOR_HJL_CF "BL0937 CF"
#define D_SENSOR_MCP39F5_TX "MCP39F5 Tx"
#define D_SENSOR_MCP39F5_RX "MCP39F5 Rx"
#define D_SENSOR_MCP39F5_RST "MCP39F5 Rst"
#define D_SENSOR_CSE7761_TX "CSE7761 Tx"
#define D_SENSOR_CSE7761_RX "CSE7761 Rx"
#define D_SENSOR_CSE7766_TX "CSE7766 Tx"
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
#define D_SENSOR_PN532_TX "PN532 Tx"
#define D_SENSOR_PN532_RX "PN532 Rx"
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
#define D_SENSOR_P9813_CLK "P9813 Clk"
#define D_SENSOR_P9813_DAT "P9813 Dat"
#define D_SENSOR_MY92X1_DI "MY92x1 DI"
#define D_SENSOR_MY92X1_DCKI "MY92x1 DCKI"
#define D_SENSOR_ARIRFRCV "ALux IrRcv"
#define D_SENSOR_ARIRFSEL "ALux IrSel"
#define D_SENSOR_TXD "Serial Tx"
#define D_SENSOR_RXD "Serial Rx"
#define D_SENSOR_ROTARY "Rotary" // Suffix "1A"
#define D_SENSOR_HRE_CLOCK "HRE Clock"
#define D_SENSOR_HRE_DATA "HRE Data"
#define D_SENSOR_ADE7953_IRQ "ADE7953 IRQ"
#define D_SENSOR_BUZZER "Buzzer"
#define D_SENSOR_OLED_RESET "OLED Reset"
#define D_SENSOR_ZIGBEE_TXD "Zigbee Tx"
#define D_SENSOR_ZIGBEE_RXD "Zigbee Rx"
#define D_SENSOR_ZIGBEE_RST "Zigbee Rst"
#define D_SENSOR_SOLAXX1_TX "SolaxX1 Tx"
#define D_SENSOR_SOLAXX1_RX "SolaxX1 Rx"
#define D_SENSOR_IBEACON_TX "iBeacon TX"
#define D_SENSOR_IBEACON_RX "iBeacon RX"
#define D_SENSOR_RDM6300_RX "RDM6300 RX"
#define D_SENSOR_CC1101_CS "CC1101 CS"
#define D_SENSOR_A4988_DIR "A4988 DIR"
#define D_SENSOR_A4988_STP "A4988 STP"
#define D_SENSOR_A4988_ENA "A4988 ENA"
#define D_SENSOR_A4988_MS1 "A4988 MS1"
#define D_SENSOR_OUTPUT_HI "Output Hi"
#define D_SENSOR_OUTPUT_LO "Output Lo"
#define D_SENSOR_AS608_TX "AS608 Tx"
#define D_SENSOR_AS608_RX "AS608 Rx"
#define D_SENSOR_DDS2382_TX "DDS238-2 Tx"
#define D_SENSOR_DDS2382_RX "DDS238-2 Rx"
#define D_SENSOR_DDSU666_TX "DDSU666 Tx"
#define D_SENSOR_DDSU666_RX "DDSU666 Rx"
#define D_SENSOR_SM2135_CLK "SM2135 Clk"
#define D_SENSOR_SM2135_DAT "SM2135 Dat"
#define D_SENSOR_DEEPSLEEP "DeepSleep"
#define D_SENSOR_EXS_ENABLE "EXS Enable"
#define D_SENSOR_CLIENT_TX "Client TX"
#define D_SENSOR_CLIENT_RX "Client RX"
#define D_SENSOR_CLIENT_RESET "Client RST"
#define D_SENSOR_GPS_RX "GPS RX"
#define D_SENSOR_GPS_TX "GPS TX"
#define D_SENSOR_HM10_RX "HM10 RX"
#define D_SENSOR_HM10_TX "HM10 TX"
#define D_SENSOR_LE01MR_RX "LE-01MR Rx"
#define D_SENSOR_LE01MR_TX "LE-01MR Tx"
#define D_SENSOR_BL0940_RX "BL0940 Rx"
#define D_SENSOR_CC1101_GDO0 "CC1101 GDO0"
#define D_SENSOR_CC1101_GDO2 "CC1101 GDO2"
#define D_SENSOR_HRXL_RX "HRXL Rx"
#define D_SENSOR_DYP_RX "DYP Rx"
#define D_SENSOR_ELECTRIQ_MOODL "MOODL Tx"
#define D_SENSOR_AS3935 "AS3935"
#define D_SENSOR_WINDMETER_SPEED "WindMeter Spd"
#define D_SENSOR_TELEINFO_RX "TInfo Rx"
#define D_SENSOR_TELEINFO_ENABLE "TInfo EN"
#define D_SENSOR_LMT01_PULSE "LMT01 Pulse"
#define D_SENSOR_ADC_INPUT "ADC Input"
#define D_SENSOR_ADC_TEMP "ADC Temp"
#define D_SENSOR_ADC_LIGHT "ADC Light"
#define D_SENSOR_ADC_BUTTON "ADC Button"
#define D_SENSOR_ADC_RANGE "ADC Range"
#define D_SENSOR_ADC_CT_POWER "ADC CT Power"
#define D_SENSOR_ADC_JOYSTICK "ADC Joystick"
#define D_SENSOR_ADC_PH "ADC pH"
#define D_GPIO_WEBCAM_PWDN "CAM_PWDN"
#define D_GPIO_WEBCAM_RESET "CAM_RESET"
#define D_GPIO_WEBCAM_XCLK "CAM_XCLK"
#define D_GPIO_WEBCAM_SIOD "CAM_SIOD"
#define D_GPIO_WEBCAM_SIOC "CAM_SIOC"
#define D_GPIO_WEBCAM_DATA "CAM_DATA"
#define D_GPIO_WEBCAM_VSYNC "CAM_VSYNC"
#define D_GPIO_WEBCAM_HREF "CAM_HREF"
#define D_GPIO_WEBCAM_PCLK "CAM_PCLK"
#define D_GPIO_WEBCAM_PSCLK "CAM_PSCLK"
#define D_GPIO_WEBCAM_HSD "CAM_HSD"
#define D_GPIO_WEBCAM_PSRCS "CAM_PSRCS"
#define D_SENSOR_ETH_PHY_POWER "ETH POWER"
#define D_SENSOR_ETH_PHY_MDC "ETH MDC"
#define D_SENSOR_ETH_PHY_MDIO "ETH MDIO"
#define D_SENSOR_TCP_TXD "TCP Tx"
#define D_SENSOR_TCP_RXD "TCP Rx"
#define D_SENSOR_IEM3000_TX "iEM3000 TX"
#define D_SENSOR_IEM3000_RX "iEM3000 RX"
#define D_SENSOR_MIEL_HVAC_TX "MiEl HVAC Tx"
#define D_SENSOR_MIEL_HVAC_RX "MiEl HVAC Rx"
#define D_SENSOR_PROJECTOR_CTRL_TX "DLP Tx"
#define D_SENSOR_PROJECTOR_CTRL_RX "DLP Rx"
#define D_SENSOR_SHELLY_DIMMER_BOOT0 "SHD Boot 0"
#define D_SENSOR_SHELLY_DIMMER_RST_INV "SHD Reset"
#define D_SENSOR_RC522_RST "RC522 Rst"
#define D_SENSOR_RC522_CS "RC522 CS"
#define D_SENSOR_NRF24_CS "NRF24 CS"
#define D_SENSOR_NRF24_DC "NRF24 DC"
#define D_SENSOR_XPT2046_CS "XPT2046 CS"
#define D_SENSOR_ILI9341_CS "ILI9341 CS"
#define D_SENSOR_ILI9341_DC "ILI9341 DC"
#define D_SENSOR_ILI9488_CS "ILI9488 CS"
#define D_SENSOR_EPAPER29_CS "EPaper29 CS"
#define D_SENSOR_EPAPER42_CS "EPaper42 CS"
#define D_SENSOR_SSD1351_CS "SSD1351 CS"
#define D_SENSOR_SSD1351_DC "SSD1351 DC"
#define D_SENSOR_RA8876_CS "RA8876 CS"
#define D_SENSOR_ST7789_CS "ST7789 CS"
#define D_SENSOR_ST7789_DC "ST7789 DC"
#define D_SENSOR_SSD1331_CS "SSD1331 CS"
#define D_SENSOR_SSD1331_DC "SSD1331 DC"
#define D_SENSOR_SDCARD_CS "SDCard CS"
#define D_SENSOR_WIEGAND_D0 "Wiegand D0"
#define D_SENSOR_WIEGAND_D1 "Wiegand D1"
#define D_SENSOR_NEOPOOL_TX "NeoPool Tx"
#define D_SENSOR_NEOPOOL_RX "NeoPool Rx"
// Units
#define D_UNIT_AMPERE "А"
#define D_UNIT_CELSIUS "C"
#define D_UNIT_CENTIMETER "cm"
#define D_UNIT_DEGREE "°"
#define D_UNIT_FAHRENHEIT "F"
#define D_UNIT_HERTZ "Hz"
#define D_UNIT_HOUR "Ч"
#define D_UNIT_GALLONS "gal"
#define D_UNIT_GALLONS_PER_MIN "g/m"
#define D_UNIT_INCREMENTS "inc"
#define D_UNIT_KELVIN "K"
#define D_UNIT_KILOMETER "km"
#define D_UNIT_KILOGRAM "kg"
#define D_UNIT_KILOMETER_PER_HOUR "km/h" // or "km/h"
#define D_UNIT_KILOOHM "кОм"
#define D_UNIT_KILOWATTHOUR "кВт"
#define D_UNIT_LITERS "L"
#define D_UNIT_LITERS_PER_MIN "L/m"
#define D_UNIT_LUX "лк"
#define D_UNIT_MICROGRAM_PER_CUBIC_METER "мкг/м³"
#define D_UNIT_MICROMETER "мкм"
#define D_UNIT_MICROSECOND "мкс"
#define D_UNIT_MICROSIEMENS_PER_CM "µS/cm"
#define D_UNIT_MILLIAMPERE "мА"
#define D_UNIT_MILLILITERS "ml"
#define D_UNIT_MILLIMETER "mm"
#define D_UNIT_MILLIMETER_MERCURY "мм рт.ст."
#define D_UNIT_MILLISECOND "мс"
#define D_UNIT_MILLIVOLT "mV"
#define D_UNIT_MINUTE "мин"
#define D_UNIT_PARTS_PER_BILLION "ppb"
#define D_UNIT_PARTS_PER_DECILITER "ppd"
#define D_UNIT_PARTS_PER_MILLION "ppm"
#define D_UNIT_MILIGRAMS_PER_LITER "mg/L"
#define D_UNIT_PERCENT "%%"
#define D_UNIT_PRESSURE "гПа"
#define D_UNIT_SECOND "сек"
#define D_UNIT_SECTORS "секторов"
#define D_UNIT_VA "VA"
#define D_UNIT_VAR "VAr"
#define D_UNIT_VOLT "В"
#define D_UNIT_WATT "Вт"
#define D_UNIT_WATTHOUR "ВтЧ"
#define D_UNIT_WATT_METER_QUADRAT "W/m²"
//SDM220, SDM120, SDM72, LE01MR
#define D_EXPORT_POWER "Export Power"
#define D_IMPORT_POWER "Import Power"
#define D_PHASE_ANGLE "Угол фазы"
#define D_IMPORT_ACTIVE "Импорт активной мощности"
#define D_EXPORT_ACTIVE "Экспорт активной мощности"
#define D_IMPORT_REACTIVE "Импорт реактивной мощности"
#define D_EXPORT_REACTIVE "Экспорт реактивной мощности"
#define D_TOTAL_REACTIVE "Итого реактивная мощность"
#define D_UNIT_KWARH "kVArh"
#define D_UNIT_ANGLE "Град"
#define D_TOTAL_ACTIVE "Total Active"
//SOLAXX1
#define D_PV1_VOLTAGE "PV1 Voltage"
#define D_PV1_CURRENT "PV1 Current"
#define D_PV1_POWER "PV1 Power"
#define D_PV2_VOLTAGE "PV2 Voltage"
#define D_PV2_CURRENT "PV2 Current"
#define D_PV2_POWER "PV2 Power"
#define D_SOLAR_POWER "Solar Power"
#define D_INVERTER_POWER "Inverter Power"
#define D_STATUS "Status"
#define D_WAITING "Waiting"
#define D_CHECKING "Checking"
#define D_WORKING "Working"
#define D_FAILURE "Failure"
#define D_SOLAX_ERROR_0 "No Error Code"
#define D_SOLAX_ERROR_1 "Grid Lost Fault"
#define D_SOLAX_ERROR_2 "Grid Voltage Fault"
#define D_SOLAX_ERROR_3 "Grid Frequency Fault"
#define D_SOLAX_ERROR_4 "Pv Voltage Fault"
#define D_SOLAX_ERROR_5 "Isolation Fault"
#define D_SOLAX_ERROR_6 "Over Temperature Fault"
#define D_SOLAX_ERROR_7 "Fan Fault"
#define D_SOLAX_ERROR_8 "Other Device Fault"
//xdrv_10_scripter.ino
#define D_CONFIGURE_SCRIPT "Edit script"
#define D_SCRIPT "edit script"
#define D_SDCARD_UPLOAD "file upload"
#define D_UFSDIR "ufs directory"
#define D_UPL_DONE "Done"
#define D_SCRIPT_CHARS_LEFT "chars left"
#define D_SCRIPT_CHARS_NO_MORE "no more chars"
#define D_SCRIPT_DOWNLOAD "Download"
#define D_SCRIPT_ENABLE "script enable"
#define D_SCRIPT_UPLOAD "Upload"
#define D_SCRIPT_UPLOAD_FILES "Upload files"
//xdrv_50_filesystem.ino
#define D_MANAGE_FILE_SYSTEM "Manage File system"
#define D_FS_SIZE "Size"
#define D_FS_FREE "Free"
//xsns_67_as3935.ino
#define D_AS3935_GAIN "gain:"
#define D_AS3935_ENERGY "energy:"
#define D_AS3935_DISTANCE "distance:"
#define D_AS3935_DISTURBER "disturber:"
#define D_AS3935_VRMS "µVrms:"
#define D_AS3935_APRX "aprx.:"
#define D_AS3935_AWAY "away"
#define D_AS3935_LIGHT "lightning"
#define D_AS3935_OUT "lightning out of range"
#define D_AS3935_NOT "distance not determined"
#define D_AS3935_ABOVE "lightning overhead"
#define D_AS3935_NOISE "noise detected"
#define D_AS3935_DISTDET "disturber detected"
#define D_AS3935_INTNOEV "Interrupt with no Event!"
#define D_AS3935_FLICKER "IRQ flicker!"
#define D_AS3935_POWEROFF "Power Off"
#define D_AS3935_NOMESS "listening..."
#define D_AS3935_ON "On"
#define D_AS3935_OFF "Off"
#define D_AS3935_INDOORS "Indoors"
#define D_AS3935_OUTDOORS "Outdoors"
#define D_AS3935_CAL_FAIL "calibration failed"
#define D_AS3935_CAL_OK "calibration set to:"
//xsns_68_opentherm.ino
#define D_SENSOR_BOILER_OT_RX "OpenTherm RX"
#define D_SENSOR_BOILER_OT_TX "OpenTherm TX"
// xnrg_15_teleinfo Denky (Teleinfo)
#define D_CONTRACT "Contract"
#define D_POWER_LOAD "Power load"
#define D_CURRENT_TARIFF "Current Tariff"
#define D_TARIFF "Tariff"
#define D_OVERLOAD "ADPS"
#define D_MAX_POWER "Max Power"
#define D_MAX_CURRENT "Max Current"
// xsns_79_as608.ino
#define D_FP_ENROLL_PLACEFINGER "Place finger"
#define D_FP_ENROLL_REMOVEFINGER "Remove finger"
#define D_FP_ENROLL_PLACESAMEFINGER "Place same finger again"
#define D_FP_ENROLL_RETRY "Error so retry"
#define D_FP_ENROLL_RESTART "Restart"
#define D_FP_ENROLL_ERROR "Error"
#define D_FP_ENROLL_RESET "Reset"
#define D_FP_ENROLL_ACTIVE "Active"
#define D_FP_ENROLL_INACTIVE "Inactive"
// Indexed by Adafruit_Fingerprint.h defines
#define D_FP_PACKETRECIEVEERR "Comms error" // 0x01 Error when receiving data package
#define D_FP_NOFINGER "" // 0x02 No finger on the sensor
#define D_FP_IMAGEFAIL "Imaging error" // 0x03 Failed to enroll the finger
#define D_FP_IMAGEMESS "Image too messy" // 0x06 Failed to generate character file due to overly disorderly fingerprint image
#define D_FP_FEATUREFAIL "Fingerprint too small" // 0x07 Failed to generate character file due to the lack of character point or small fingerprint image
#define D_FP_NOMATCH "No match" // 0x08 Finger doesn't match
#define D_FP_NOTFOUND "Did not find a match" // 0x09 Failed to find matching finger
#define D_FP_ENROLLMISMATCH "Fingerprint did not match" // 0x0A Failed to combine the character files
#define D_FP_BADLOCATION "Bad location" // 0x0B Addressed PageID is beyond the finger library
#define D_FP_DBRANGEFAIL "DB range error" // 0x0C Error when reading template from library or invalid template
#define D_FP_UPLOADFEATUREFAIL "Upload feature error" // 0x0D Error when uploading template
#define D_FP_PACKETRESPONSEFAIL "Packet response error" // 0x0E Module failed to receive the following data packages
#define D_FP_UPLOADFAIL "Upload error" // 0x0F Error when uploading image
#define D_FP_DELETEFAIL "Delete error" // 0x10 Failed to delete the template
#define D_FP_DBCLEARFAIL "DB Clear error" // 0x11 Failed to clear finger library
#define D_FP_PASSFAIL "Password error" // 0x13 Find whether the fingerprint passed or failed
#define D_FP_INVALIDIMAGE "Image invalid" // 0x15 Failed to generate image because of lac of valid primary image
#define D_FP_FLASHERR "Flash write error" // 0x18 Error when writing flash
#define D_FP_INVALIDREG "Invalid number" // 0x1A Invalid register number
#define D_FP_ADDRCODE "Address code" // 0x20 Address code
#define D_FP_PASSVERIFY "Password verified" // 0x21 Verify the fingerprint passed
#define D_FP_UNKNOWNERROR "Error" // Any other error
// xsns_83_neopool.ino
#define D_NEOPOOL_MACH_NONE "NeoPool" // Machine names
#define D_NEOPOOL_MACH_HIDROLIFE "Hidrolife (yellow)"
#define D_NEOPOOL_MACH_AQUASCENIC "Aquascenic (blue)"
#define D_NEOPOOL_MACH_OXILIFE "Oxilife (green)"
#define D_NEOPOOL_MACH_BIONET "Bionet (light blue)"
#define D_NEOPOOL_MACH_HIDRONISER "Hidroniser (red)"
#define D_NEOPOOL_MACH_UVSCENIC "UVScenic (lilac)"
#define D_NEOPOOL_MACH_STATION "Station (orange)"
#define D_NEOPOOL_MACH_BRILIX "Brilix"
#define D_NEOPOOL_MACH_GENERIC "Generic"
#define D_NEOPOOL_MACH_BAYROL "Bayrol"
#define D_NEOPOOL_MACH_HAY "Hay"
#define D_NEOPOOL_FILTRATION_MANUAL "Manual" // Filtration modes
#define D_NEOPOOL_FILTRATION_AUTO "Auto"
#define D_NEOPOOL_FILTRATION_HEATING "Heating"
#define D_NEOPOOL_FILTRATION_SMART "Smart"
#define D_NEOPOOL_FILTRATION_INTELLIGENT "Intelligent"
#define D_NEOPOOL_FILTRATION_BACKWASH "Backwash"
#define D_NEOPOOL_FILTRATION_NONE "" // Filtration speed level
#define D_NEOPOOL_FILTRATION_SLOW "slow"
#define D_NEOPOOL_FILTRATION_MEDIUM "medium"
#define D_NEOPOOL_FILTRATION_FAST "fast"
#define D_NEOPOOL_TYPE "Type" // Sensor & relais names
#define D_NEOPOOL_REDOX "Redox"
#define D_NEOPOOL_CHLORINE "Chlorine"
#define D_NEOPOOL_CONDUCTIVITY "Conductivity"
#define D_NEOPOOL_IONIZATION "Ionization"
#define D_NEOPOOL_HYDROLYSIS "Hydrolysis"
#define D_NEOPOOL_RELAY "Relay"
#define D_NEOPOOL_RELAY_FILTRATION "Filtration"
#define D_NEOPOOL_RELAY_LIGHT "Light"
#define D_NEOPOOL_RELAY_PH_ACID "Acid pump"
#define D_NEOPOOL_RELAY_PH_BASE "Base pump"
#define D_NEOPOOL_RELAY_RX "Redox level"
#define D_NEOPOOL_RELAY_CL "Chlorine pump"
#define D_NEOPOOL_RELAY_CD "Brine pump"
#define D_NEOPOOL_TIME "Time"
#define D_NEOPOOL_FILT_MODE "Filtration"
#define D_NEOPOOL_POLARIZATION "Pol" // Sensor status
#define D_NEOPOOL_PR_OFF "PrOff"
#define D_NEOPOOL_SETPOINT_OK "Ok"
#define D_NEOPOOL_COVER "Cover"
#define D_NEOPOOL_SHOCK "Shock"
#define D_NEOPOOL_ALARM "! "
#define D_NEOPOOL_LOW "Low"
#define D_NEOPOOL_FLOW1 "FL1"
#define D_NEOPOOL_FLOW2 "FL2"
#define D_NEOPOOL_PH_HIGH "too high" // ph Alarms
#define D_NEOPOOL_PH_LOW "too low"
#define D_NEOPOOL_PUMP_TIME_EXCEEDED "pump time exceeded"
#endif // _LANGUAGE_RU_RU_H_