mirror of https://github.com/arendst/Tasmota.git
593 lines
21 KiB
C++
593 lines
21 KiB
C++
/*
|
|
xsns_35_Tx20.ino - La Crosse Tx20/Tx23 wind sensor support for Tasmota
|
|
|
|
Copyright (C) 2021 Thomas Eckerstorfer, Norbert Richter and Theo Arends
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#if defined(USE_TX20_WIND_SENSOR) || defined(USE_TX23_WIND_SENSOR)
|
|
|
|
/*********************************************************************************************\
|
|
* La Crosse TX20/TX23 Anemometer
|
|
*
|
|
* based on https://github.com/bunnyhu/ESP8266_TX20_wind_sensor/
|
|
* http://blog.bubux.de/windsensor-tx20-mit-esp8266/
|
|
* https://www.john.geek.nz/2011/07/la-crosse-tx20-anemometer-communication-protocol/
|
|
* http://www.rd-1000.com/chpm78/lacrosse/Lacrosse_TX23_protocol.html
|
|
* https://www.john.geek.nz/2012/08/la-crosse-tx23u-anemometer-communication-protocol/
|
|
*
|
|
* TX23 RJ11 connection:
|
|
* 1 yellow - GND
|
|
* 2 green - NC
|
|
* 3 red - Vcc 3.3V
|
|
* 4 black/brown - TxD Signal (GPIOxx)
|
|
*
|
|
* Reads speed and direction
|
|
*
|
|
* Calculate statistics:
|
|
* speed avg/min/max
|
|
* direction avg/min/max/range
|
|
*
|
|
* avg values are updated continuously (using exponentially weighted average)
|
|
* min/max/range values are reset after TelePeriod time or TX2X_WEIGHT_AVG_SAMPLE seconds
|
|
* (if TelePeriod is disabled)
|
|
*
|
|
* Statistic calculation can be disabled by defining USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
* (saves 1k8)
|
|
\*********************************************************************************************/
|
|
|
|
#define XSNS_35 35
|
|
|
|
#if defined(USE_TX20_WIND_SENSOR) && defined(USE_TX23_WIND_SENSOR)
|
|
#undef USE_TX20_WIND_SENSOR
|
|
#warning **** use USE_TX20_WIND_SENSOR or USE_TX23_WIND_SENSOR but not both together, TX20 disabled ****
|
|
#endif // USE_TX20_WIND_SENSOR && USE_TX23_WIND_SENSOR
|
|
|
|
// #define USE_TX2X_WIND_SENSOR_NOSTATISTICS // suppress statistics (speed/dir avg/min/max/range)
|
|
#define TX2X_BIT_TIME 1220 // microseconds
|
|
#define TX2X_WEIGHT_AVG_SAMPLE 150 // seconds
|
|
#define TX2X_TIMEOUT 10 // seconds
|
|
#define TX23_READ_INTERVAL 4 // seconds (don't use less than 3)
|
|
|
|
// The Arduino standard GPIO routines are not enough,
|
|
// must use some from the Espressif SDK as well
|
|
extern "C" {
|
|
#include "gpio.h"
|
|
}
|
|
|
|
#ifdef USE_TX20_WIND_SENSOR
|
|
#undef D_TX2x_NAME
|
|
#define D_TX2x_NAME "TX20"
|
|
#else // USE_TX20_WIND_SENSOR
|
|
#undef D_TX2x_NAME
|
|
#define D_TX2x_NAME "TX23"
|
|
#endif // USE_TX20_WIND_SENSOR
|
|
|
|
#ifdef USE_WEBSERVER
|
|
#define D_TX20_WIND_AVG "∅"
|
|
#define D_TX20_WIND_ANGLE "∠"
|
|
#define D_TX20_WIND_DEGREE "°"
|
|
const char HTTP_SNS_TX2X[] PROGMEM =
|
|
"{s}" D_TX2x_NAME " " D_TX20_WIND_SPEED "{m}%*_f %s{e}"
|
|
#ifndef USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
"{s}" D_TX2x_NAME " " D_TX20_WIND_SPEED " " D_TX20_WIND_AVG "{m}%*_f %s{e}"
|
|
"{s}" D_TX2x_NAME " " D_TX20_WIND_SPEED_MIN "{m}%*_f %s{e}"
|
|
"{s}" D_TX2x_NAME " " D_TX20_WIND_SPEED_MAX "{m}%*_f %s{e}"
|
|
#endif // USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
"{s}" D_TX2x_NAME " " D_TX20_WIND_DIRECTION "{m}%s %*_f" D_TX20_WIND_DEGREE "{e}"
|
|
#ifndef USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
"{s}" D_TX2x_NAME " " D_TX20_WIND_DIRECTION " " D_TX20_WIND_AVG "{m}%s %*_f" D_TX20_WIND_DEGREE "{e}"
|
|
"{s}" D_TX2x_NAME " " D_TX20_WIND_DIRECTION " " D_TX20_WIND_ANGLE "{m}%*_f" D_TX20_WIND_DEGREE " (%*_f,%*_f)" D_TX20_WIND_DEGREE;
|
|
#endif // USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
;
|
|
#endif // USE_WEBSERVER
|
|
|
|
// float saves 48 byte
|
|
float const tx2x_f_pi = 3.1415926535897932384626433; // Pi
|
|
float const tx2x_f_halfpi = tx2x_f_pi / 2.0;
|
|
float const tx2x_f_pi180 = tx2x_f_pi / 180.0;
|
|
|
|
#define TX2X_DIRECTIONS_MAXSIZE 3
|
|
const char kTx2xDirections[] PROGMEM = D_TX20_NORTH "|"
|
|
D_TX20_NORTH D_TX20_NORTH D_TX20_EAST "|"
|
|
D_TX20_NORTH D_TX20_EAST "|"
|
|
D_TX20_EAST D_TX20_NORTH D_TX20_EAST "|"
|
|
D_TX20_EAST "|"
|
|
D_TX20_EAST D_TX20_SOUTH D_TX20_EAST "|"
|
|
D_TX20_SOUTH D_TX20_EAST "|"
|
|
D_TX20_SOUTH D_TX20_SOUTH D_TX20_EAST "|"
|
|
D_TX20_SOUTH "|"
|
|
D_TX20_SOUTH D_TX20_SOUTH D_TX20_WEST "|"
|
|
D_TX20_SOUTH D_TX20_WEST "|"
|
|
D_TX20_WEST D_TX20_SOUTH D_TX20_WEST "|"
|
|
D_TX20_WEST "|"
|
|
D_TX20_WEST D_TX20_NORTH D_TX20_WEST "|"
|
|
D_TX20_NORTH D_TX20_WEST "|"
|
|
D_TX20_NORTH D_TX20_NORTH D_TX20_WEST;
|
|
|
|
int32_t tx2x_wind_speed = 0;
|
|
int32_t tx2x_wind_direction = 0;
|
|
|
|
#ifndef USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
int32_t tx2x_wind_speed_min = 0xfff;
|
|
int32_t tx2x_wind_speed_max = 0;
|
|
float tx2x_wind_speed_avg = 0;
|
|
float tx2x_wind_direction_avg_x = 0;
|
|
float tx2x_wind_direction_avg_y = 0;
|
|
float tx2x_wind_direction_avg = 0;
|
|
int32_t tx2x_wind_direction_min = 0;
|
|
int32_t tx2x_wind_direction_max = 0;
|
|
|
|
uint32_t tx2x_count = 0;
|
|
uint32_t tx2x_avg_samples;
|
|
uint32_t tx2x_last_uptime = 0;
|
|
bool tx2x_valuesread = false;
|
|
#endif // USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
|
|
#ifdef DEBUG_TASMOTA_SENSOR
|
|
uint32_t tx2x_sa = 0;
|
|
uint32_t tx2x_sb = 0;
|
|
uint32_t tx2x_sc = 0;
|
|
uint32_t tx2x_sd = 0;
|
|
uint32_t tx2x_se = 0;
|
|
uint32_t tx2x_sf = 0;
|
|
#endif // DEBUG_TASMOTA_SENSOR
|
|
uint32_t tx2x_last_available = 0;
|
|
|
|
#ifdef USE_TX23_WIND_SENSOR
|
|
uint32_t tx23_stage = 0;
|
|
#endif // USE_TX23_WIND_SENSOR
|
|
|
|
void ICACHE_RAM_ATTR TX2xStartRead(void)
|
|
{
|
|
/**
|
|
* La Crosse TX20 Anemometer datagram every 2 seconds
|
|
* 0-0 11011 0011 111010101111 0101 1100 000101010000 0-0 - Received pin data at 1200 uSec per bit
|
|
* sa sb sc sd se sf
|
|
* 00100 1100 000101010000 1010 1100 000101010000 - sa to sd inverted user data, LSB first
|
|
* sa - Start frame (invert) 00100
|
|
* sb - Wind direction (invert) 0 - 15
|
|
* sc - Wind speed 0 (invert) - 511
|
|
* sd - Checksum (invert)
|
|
* se - Wind direction 0 - 15
|
|
* sf - Wind speed 0 - 511
|
|
*
|
|
* La Crosse TX23 Anemometer datagram after setting TxD to low/high
|
|
* 1-1 0 1 0-0 11011 0011 111010101111 0101 1100 000101010000 1-1 - Received pin data at 1200 uSec per bit
|
|
* t s c sa sb sc sd se sf
|
|
* t - host pulls TxD low - signals TX23 to sent measurement
|
|
* s - TxD released - TxD is pulled high due to pullup
|
|
* c - TX23U pulls TxD low - calculation in progress
|
|
* sa - Start frame 11011
|
|
* sb - Wind direction 0 - 15
|
|
* sc - Wind speed 0 - 511
|
|
* sd - Checksum
|
|
* se - Wind direction (invert) 0 - 15
|
|
* sf - Wind speed (invert) 0 - 511
|
|
*/
|
|
#ifdef USE_TX23_WIND_SENSOR
|
|
if (0!=tx23_stage)
|
|
{
|
|
if ((2==tx23_stage) || (3==tx23_stage))
|
|
{
|
|
#endif // USE_TX23_WIND_SENSOR
|
|
#ifdef DEBUG_TASMOTA_SENSOR
|
|
tx2x_sa = 0;
|
|
tx2x_sb = 0;
|
|
tx2x_sc = 0;
|
|
tx2x_sd = 0;
|
|
tx2x_se = 0;
|
|
tx2x_sf = 0;
|
|
#else // DEBUG_TASMOTA_SENSOR
|
|
uint32_t tx2x_sa = 0;
|
|
uint32_t tx2x_sb = 0;
|
|
uint32_t tx2x_sc = 0;
|
|
uint32_t tx2x_sd = 0;
|
|
uint32_t tx2x_se = 0;
|
|
uint32_t tx2x_sf = 0;
|
|
#endif // DEBUG_TASMOTA_SENSOR
|
|
|
|
delayMicroseconds(TX2X_BIT_TIME / 2);
|
|
|
|
for (int32_t bitcount = 41; bitcount > 0; bitcount--) {
|
|
uint32_t dpin = (digitalRead(Pin(GPIO_TX2X_TXD_BLACK)));
|
|
#ifdef USE_TX23_WIND_SENSOR
|
|
dpin ^= 1;
|
|
#endif // USE_TX23_WIND_SENSOR
|
|
if (bitcount > 41 - 5) {
|
|
// start frame (invert)
|
|
tx2x_sa = (tx2x_sa << 1) | (dpin ^ 1);
|
|
} else if (bitcount > 41 - 5 - 4) {
|
|
// wind dir (invert)
|
|
tx2x_sb = tx2x_sb >> 1 | ((dpin ^ 1) << 3);
|
|
} else if (bitcount > 41 - 5 - 4 - 12) {
|
|
// windspeed (invert)
|
|
tx2x_sc = tx2x_sc >> 1 | ((dpin ^ 1) << 11);
|
|
} else if (bitcount > 41 - 5 - 4 - 12 - 4) {
|
|
// checksum (invert)
|
|
tx2x_sd = tx2x_sd >> 1 | ((dpin ^ 1) << 3);
|
|
} else if (bitcount > 41 - 5 - 4 - 12 - 4 - 4) {
|
|
// wind dir
|
|
tx2x_se = tx2x_se >> 1 | (dpin << 3);
|
|
} else {
|
|
// windspeed
|
|
tx2x_sf = tx2x_sf >> 1 | (dpin << 11);
|
|
}
|
|
delayMicroseconds(TX2X_BIT_TIME);
|
|
}
|
|
|
|
uint32_t chk = (tx2x_sb + (tx2x_sc & 0xf) + ((tx2x_sc >> 4) & 0xf) + ((tx2x_sc >> 8) & 0xf));
|
|
chk &= 0xf;
|
|
|
|
// check checksum, start frame,non-inverted==inverted values and max. speed
|
|
;
|
|
#ifdef USE_TX23_WIND_SENSOR
|
|
if ((chk == tx2x_sd) && (0x1b==tx2x_sa) && (tx2x_sb==tx2x_se) && (tx2x_sc==tx2x_sf) && (tx2x_sc < 511)) {
|
|
#else
|
|
if ((chk == tx2x_sd) && (tx2x_sb==tx2x_se) && (tx2x_sc==tx2x_sf) && (tx2x_sc < 511)) {
|
|
#endif
|
|
tx2x_last_available = TasmotaGlobal.uptime;
|
|
// Wind speed spec: 0 to 180 km/h (0 to 50 m/s)
|
|
tx2x_wind_speed = tx2x_sc;
|
|
tx2x_wind_direction = tx2x_sb;
|
|
#ifndef USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
if (!tx2x_valuesread) {
|
|
tx2x_wind_direction_min = tx2x_wind_direction;
|
|
tx2x_wind_direction_max = tx2x_wind_direction;
|
|
tx2x_valuesread = true;
|
|
}
|
|
#endif // USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
}
|
|
|
|
#ifdef USE_TX23_WIND_SENSOR
|
|
}
|
|
tx23_stage++;
|
|
}
|
|
#endif // USE_TX23_WIND_SENSOR
|
|
|
|
// Must clear this bit in the interrupt register,
|
|
// it gets set even when interrupts are disabled
|
|
GPIO_REG_WRITE(GPIO_STATUS_W1TC_ADDRESS, 1 << Pin(GPIO_TX2X_TXD_BLACK));
|
|
}
|
|
|
|
bool Tx2xAvailable(void)
|
|
{
|
|
return ((TasmotaGlobal.uptime - tx2x_last_available) < TX2X_TIMEOUT);
|
|
}
|
|
|
|
#ifndef USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
float atan2f(float a, float b)
|
|
{
|
|
float atan2val;
|
|
if (b > 0) {
|
|
atan2val = atanf(a/b);
|
|
} else if ((b < 0) && (a >= 0)) {
|
|
atan2val = atanf(a/b) + tx2x_f_pi;
|
|
} else if ((b < 0) && (a < 0)) {
|
|
atan2val = atanf(a/b) - tx2x_f_pi;
|
|
} else if ((b == 0) && (a > 0)) {
|
|
atan2val = tx2x_f_halfpi;
|
|
} else if ((b == 0) && (a < 0)) {
|
|
atan2val = 0 - (tx2x_f_halfpi);
|
|
} else if ((b == 0) && (a == 0)) {
|
|
atan2val = 1000; //represents undefined
|
|
}
|
|
return atan2val;
|
|
}
|
|
|
|
void Tx2xCheckSampleCount(void)
|
|
{
|
|
uint32_t tx2x_prev_avg_samples = tx2x_avg_samples;
|
|
if (Settings.tele_period) {
|
|
// number for avg samples = teleperiod value if set
|
|
tx2x_avg_samples = Settings.tele_period;
|
|
} else {
|
|
// otherwise use default number of samples for this driver
|
|
tx2x_avg_samples = TX2X_WEIGHT_AVG_SAMPLE;
|
|
}
|
|
if (tx2x_prev_avg_samples != tx2x_avg_samples) {
|
|
tx2x_wind_speed_avg = tx2x_wind_speed;
|
|
tx2x_count = 0;
|
|
}
|
|
}
|
|
|
|
void Tx2xResetStat(void)
|
|
{
|
|
DEBUG_SENSOR_LOG(PSTR(D_TX2x_NAME ": reset statistics"));
|
|
tx2x_last_uptime = TasmotaGlobal.uptime;
|
|
Tx2xResetStatData();
|
|
}
|
|
|
|
void Tx2xResetStatData(void)
|
|
{
|
|
tx2x_wind_speed_min = tx2x_wind_speed;
|
|
tx2x_wind_speed_max = tx2x_wind_speed;
|
|
|
|
tx2x_wind_direction_min = tx2x_wind_direction;
|
|
tx2x_wind_direction_max = tx2x_wind_direction;
|
|
}
|
|
#endif // USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
|
|
void Tx2xRead(void)
|
|
{
|
|
#ifdef USE_TX23_WIND_SENSOR
|
|
// TX23 needs to trigger start transmission - TxD Line
|
|
// ___________ _ ___ ___
|
|
// |____| |___________| |_| |__XXXXXXXXXX
|
|
// trigger start conv Startframe Data
|
|
//
|
|
// note: TX23 speed calculation is unstable when conversion starts
|
|
// less than 2 seconds after last request
|
|
if ((TasmotaGlobal.uptime % TX23_READ_INTERVAL)==0) {
|
|
// TX23 start transmission by pulling down TxD line for at minimum 500ms
|
|
// so we pull TxD signal to low every 3 seconds
|
|
tx23_stage = 0;
|
|
pinMode(Pin(GPIO_TX2X_TXD_BLACK), OUTPUT);
|
|
digitalWrite(Pin(GPIO_TX2X_TXD_BLACK), LOW);
|
|
} else if ((TasmotaGlobal.uptime % TX23_READ_INTERVAL)==1) {
|
|
// after pulling down TxD: pull-up TxD every x+1 seconds
|
|
// to trigger TX23 start transmission
|
|
tx23_stage = 1; // first rising signal is invalid
|
|
pinMode(Pin(GPIO_TX2X_TXD_BLACK), INPUT_PULLUP);
|
|
}
|
|
#endif // USE_TX23_WIND_SENSOR
|
|
if (Tx2xAvailable()) {
|
|
#ifdef DEBUG_TASMOTA_SENSOR
|
|
DEBUG_SENSOR_LOG(PSTR(D_TX2x_NAME ": sa=0x%02lx sb=%ld (0x%02lx), sc=%ld (0x%03lx), sd=0x%02lx, se=%ld, sf=%ld"), tx2x_sa,tx2x_sb,tx2x_sb,tx2x_sc,tx2x_sc,tx2x_sd,tx2x_se,tx2x_sf);
|
|
#endif // DEBUG_TASMOTA_SENSOR
|
|
#ifndef USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
if (tx2x_wind_speed < tx2x_wind_speed_min) {
|
|
tx2x_wind_speed_min = tx2x_wind_speed;
|
|
}
|
|
if (tx2x_wind_speed > tx2x_wind_speed_max) {
|
|
tx2x_wind_speed_max = tx2x_wind_speed;
|
|
}
|
|
|
|
// exponentially weighted average is not quite as smooth as the arithmetic average
|
|
// but close enough to the moving average and does not require the regular reset
|
|
// of the divider with the associated jump in avg values after period is over
|
|
if (tx2x_count <= tx2x_avg_samples) {
|
|
tx2x_count++;
|
|
}
|
|
tx2x_wind_speed_avg -= tx2x_wind_speed_avg / tx2x_count;
|
|
tx2x_wind_speed_avg += float(tx2x_wind_speed) / tx2x_count;
|
|
|
|
tx2x_wind_direction_avg_x -= tx2x_wind_direction_avg_x / tx2x_count;
|
|
tx2x_wind_direction_avg_x += cosf((tx2x_wind_direction*22.5) * tx2x_f_pi180) / tx2x_count;
|
|
tx2x_wind_direction_avg_y -= tx2x_wind_direction_avg_y / tx2x_count;
|
|
tx2x_wind_direction_avg_y += sinf((tx2x_wind_direction*22.5) * tx2x_f_pi180) / tx2x_count;
|
|
tx2x_wind_direction_avg = atan2f(tx2x_wind_direction_avg_y, tx2x_wind_direction_avg_x) * 180.0f / tx2x_f_pi;
|
|
if (tx2x_wind_direction_avg<0.0) {
|
|
tx2x_wind_direction_avg += 360.0;
|
|
}
|
|
if (tx2x_wind_direction_avg>360.0) {
|
|
tx2x_wind_direction_avg -= 360.0;
|
|
}
|
|
|
|
int32_t tx2x_wind_direction_avg_int = int((tx2x_wind_direction_avg/22.5)+0.5) % 16;
|
|
|
|
// degrees min/max
|
|
if (tx2x_wind_direction > tx2x_wind_direction_avg_int) {
|
|
// clockwise or left-handed rotation
|
|
if ((tx2x_wind_direction-tx2x_wind_direction_avg_int)>8) {
|
|
// diff > 180°
|
|
if ((tx2x_wind_direction - 16) < tx2x_wind_direction_min) {
|
|
// new min (negative values < 0)
|
|
tx2x_wind_direction_min = tx2x_wind_direction - 16;
|
|
}
|
|
} else {
|
|
// diff <= 180°
|
|
if (tx2x_wind_direction > tx2x_wind_direction_max) {
|
|
// new max (origin max)
|
|
tx2x_wind_direction_max = tx2x_wind_direction;
|
|
}
|
|
}
|
|
} else {
|
|
// also clockwise or left-handed rotation but needs other tests
|
|
if ((tx2x_wind_direction_avg_int-tx2x_wind_direction)>8) {
|
|
// diff > 180°
|
|
if ((tx2x_wind_direction + 16) > tx2x_wind_direction_max) {
|
|
// new max (overflow values > 15)
|
|
tx2x_wind_direction_max = tx2x_wind_direction + 16;
|
|
}
|
|
} else {
|
|
// diff <= 180°
|
|
if (tx2x_wind_direction < tx2x_wind_direction_min) {
|
|
// new min (origin min)
|
|
tx2x_wind_direction_min = tx2x_wind_direction;
|
|
}
|
|
}
|
|
}
|
|
|
|
#ifdef DEBUG_TASMOTA_SENSOR
|
|
DEBUG_SENSOR_LOG(PSTR(D_TX2x_NAME ": dir stat - counter=%ld, actint=%ld, avgint=%ld, avg=%*_f (cosx=%*_f, siny=%*_f), min %d, max %d"),
|
|
(TasmotaGlobal.uptime-tx2x_last_uptime),
|
|
tx2x_wind_direction,
|
|
tx2x_wind_direction_avg_int,
|
|
1, &tx2x_wind_direction_avg,
|
|
1, &tx2x_wind_direction_avg_x,
|
|
1, &tx2x_wind_direction_avg_y,
|
|
tx2x_wind_direction_min,
|
|
tx2x_wind_direction_max
|
|
);
|
|
#endif // DEBUG_TASMOTA_SENSOR
|
|
#endif // USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
} else {
|
|
DEBUG_SENSOR_LOG(PSTR(D_TX2x_NAME ": not available"));
|
|
tx2x_wind_speed = 0;
|
|
tx2x_wind_direction = 0;
|
|
#ifndef USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
tx2x_wind_speed_avg = 0;
|
|
tx2x_wind_direction_avg = 0;
|
|
Tx2xResetStatData();
|
|
#endif // USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
}
|
|
|
|
#ifndef USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
Tx2xCheckSampleCount();
|
|
if (0==Settings.tele_period && (TasmotaGlobal.uptime-tx2x_last_uptime)>=tx2x_avg_samples) {
|
|
Tx2xResetStat();
|
|
}
|
|
#endif // USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
}
|
|
|
|
void Tx2xInit(void)
|
|
{
|
|
if (!Settings.flag2.speed_conversion) {
|
|
Settings.flag2.speed_conversion = 2; // 0 = none, 1 = m/s, 2 = km/h, 3 = kn, 4 = mph, 5 = ft/s, 6 = yd/s
|
|
}
|
|
#ifndef USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
tx2x_valuesread = false;
|
|
Tx2xResetStat();
|
|
Tx2xCheckSampleCount();
|
|
#endif // USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
#ifdef USE_TX23_WIND_SENSOR
|
|
tx23_stage = 0;
|
|
pinMode(Pin(GPIO_TX2X_TXD_BLACK), OUTPUT);
|
|
digitalWrite(Pin(GPIO_TX2X_TXD_BLACK), LOW);
|
|
#else // USE_TX23_WIND_SENSOR
|
|
pinMode(Pin(GPIO_TX2X_TXD_BLACK), INPUT);
|
|
#endif // USE_TX23_WIND_SENSOR
|
|
attachInterrupt(Pin(GPIO_TX2X_TXD_BLACK), TX2xStartRead, RISING);
|
|
}
|
|
|
|
int32_t Tx2xNormalize(int32_t value)
|
|
{
|
|
while (value>15) {
|
|
value -= 16;
|
|
}
|
|
while (value<0) {
|
|
value += 16;
|
|
}
|
|
return value;
|
|
}
|
|
|
|
void Tx2xShow(bool json)
|
|
{
|
|
if (!Tx2xAvailable()) { return; }
|
|
|
|
float wind_speed_float = ConvertSpeed(tx2x_wind_speed) / 10;
|
|
float wind_direction_float = tx2x_wind_direction * 22.5;
|
|
char wind_direction_cardinal_string[TX2X_DIRECTIONS_MAXSIZE+1];
|
|
GetTextIndexed(wind_direction_cardinal_string, sizeof(wind_direction_cardinal_string), tx2x_wind_direction, kTx2xDirections);
|
|
#ifndef USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
float wind_speed_min_float = ConvertSpeed(tx2x_wind_speed_min) / 10;
|
|
float wind_speed_max_float = ConvertSpeed(tx2x_wind_speed_max) / 10;
|
|
float wind_speed_avg_float = ConvertSpeed(tx2x_wind_speed_avg) / 10;
|
|
float wind_direction_avg_float = tx2x_wind_direction_avg;
|
|
char wind_direction_avg_cardinal_string[4];
|
|
GetTextIndexed(wind_direction_avg_cardinal_string, sizeof(wind_direction_avg_cardinal_string), int((tx2x_wind_direction_avg/22.5f)+0.5f) % 16, kTx2xDirections);
|
|
float wind_direction_range_float = (tx2x_wind_direction_max-tx2x_wind_direction_min) * 22.5;
|
|
float wind_direction_min_float = Tx2xNormalize(tx2x_wind_direction_min) * 22.5;
|
|
float wind_direction_max_float = tx2x_wind_direction_max * 22.5;
|
|
#endif // USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
|
|
if (json) {
|
|
#ifndef USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
#ifdef USE_TX2x_LEGACY_JSON
|
|
ResponseAppend_P(PSTR(",\"" D_TX2x_NAME "\":{\"" D_JSON_SPEED "\":%*_f,\"SpeedAvg\":%*_f,\"SpeedMax\":%*_f,\"Direction\":\"%s\",\"Degree\":%*_f}"),
|
|
1, &wind_speed_float,
|
|
1, &wind_speed_avg_float,
|
|
1, &wind_speed_max_float,
|
|
wind_direction_cardinal_string,
|
|
1, &wind_direction_float
|
|
);
|
|
#else // USE_TX2x_LEGACY_JSON
|
|
ResponseAppend_P(PSTR(",\"" D_TX2x_NAME "\":{\"" D_JSON_SPEED "\":{\"Act\":%*_f,\"Avg\":%*_f,\"Min\":%*_f,\"Max\":%*_f},\"Dir\":{\"Card\":\"%s\",\"Deg\":%*_f,\"Avg\":%*_f,\"AvgCard\":\"%s\",\"Min\":%*_f,\"Max\":%*_f,\"Range\":%*_f}}"),
|
|
1, &wind_speed_float,
|
|
1, &wind_speed_avg_float,
|
|
1, &wind_speed_min_float,
|
|
1, &wind_speed_max_float,
|
|
wind_direction_cardinal_string,
|
|
1, &wind_direction_float,
|
|
1, &wind_direction_avg_float,
|
|
wind_direction_avg_cardinal_string,
|
|
1, &wind_direction_min_float,
|
|
1, &wind_direction_max_float,
|
|
1, &wind_direction_range_float
|
|
);
|
|
#endif // USE_TX2x_LEGACY_JSON
|
|
#else // USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
#ifdef USE_TX2x_LEGACY_JSON
|
|
ResponseAppend_P(PSTR(",\"" D_TX2x_NAME "\":{\"" D_JSON_SPEED "\":%*_f,\"Direction\":\"%s\",\"Degree\":%*_f}"),
|
|
1, &wind_speed_float, wind_direction_cardinal_string, 1, &wind_direction_float);
|
|
#else // USE_TX2x_LEGACY_JSON
|
|
ResponseAppend_P(PSTR(",\"" D_TX2x_NAME "\":{\"" D_JSON_SPEED "\":{\"Act\":%*_f},\"Dir\":{\"Card\":\"%s\",\"Deg\":%*_f}}"),
|
|
1, &wind_speed_float, wind_direction_cardinal_string, 1, &wind_direction_float);
|
|
#endif // USE_TX2x_LEGACY_JSON
|
|
#endif // USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
#ifdef USE_WEBSERVER
|
|
} else {
|
|
WSContentSend_PD(HTTP_SNS_TX2X,
|
|
1, &wind_speed_float,
|
|
SpeedUnit().c_str(),
|
|
#ifndef USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
1, &wind_speed_avg_float,
|
|
SpeedUnit().c_str(),
|
|
1, &wind_speed_min_float,
|
|
SpeedUnit().c_str(),
|
|
1, &wind_speed_max_float,
|
|
SpeedUnit().c_str(),
|
|
#endif // USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
wind_direction_cardinal_string,
|
|
1, &wind_direction_float
|
|
#ifndef USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
,wind_direction_avg_cardinal_string,
|
|
1, &wind_direction_avg_float,
|
|
1, &wind_direction_range_float,
|
|
1, &wind_direction_min_float,
|
|
1, &wind_direction_max_float
|
|
#endif // USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
);
|
|
#endif // USE_WEBSERVER
|
|
}
|
|
}
|
|
|
|
/*********************************************************************************************\
|
|
* Interface
|
|
\*********************************************************************************************/
|
|
|
|
bool Xsns35(uint8_t function)
|
|
{
|
|
bool result = false;
|
|
|
|
if (PinUsed(GPIO_TX2X_TXD_BLACK)) {
|
|
switch (function) {
|
|
case FUNC_INIT:
|
|
Tx2xInit();
|
|
break;
|
|
case FUNC_EVERY_SECOND:
|
|
Tx2xRead();
|
|
break;
|
|
#ifndef USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
case FUNC_AFTER_TELEPERIOD:
|
|
Tx2xResetStat();
|
|
break;
|
|
#endif // USE_TX2X_WIND_SENSOR_NOSTATISTICS
|
|
case FUNC_JSON_APPEND:
|
|
Tx2xShow(true);
|
|
break;
|
|
#ifdef USE_WEBSERVER
|
|
case FUNC_WEB_SENSOR:
|
|
Tx2xShow(false);
|
|
break;
|
|
#endif // USE_WEBSERVER
|
|
|
|
}
|
|
}
|
|
return result;
|
|
}
|
|
|
|
#endif // USE_TX20_WIND_SENSOR || USE_TX23_WIND_SENSOR
|