mirror of https://github.com/arendst/Tasmota.git
108 lines
5.1 KiB
C
108 lines
5.1 KiB
C
/*
|
|
tasmota_template_ESP32.h - template settings for Tasmota
|
|
|
|
Copyright (C) 2020 Theo Arends
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#ifndef _TASMOTA_TEMPLATE_ESP32_H_
|
|
#define _TASMOTA_TEMPLATE_ESP32_H_
|
|
|
|
#ifdef ESP32
|
|
|
|
// Hardware has no ESP32
|
|
#undef USE_TUYA_DIMMER
|
|
#undef USE_PWM_DIMMER
|
|
#undef USE_EXS_DIMMER
|
|
#undef USE_ARMTRONIX_DIMMERS
|
|
#undef USE_SONOFF_RF
|
|
#undef USE_SONOFF_SC
|
|
#undef USE_SONOFF_IFAN
|
|
#undef USE_SONOFF_L1
|
|
#undef USE_SONOFF_D1
|
|
#undef USE_RF_FLASH
|
|
|
|
// Not ported (yet)
|
|
#undef USE_DISCOVERY
|
|
#undef USE_ADC_VCC // Needs to be ported
|
|
#undef USE_DEEPSLEEP
|
|
#undef USE_MY92X1
|
|
#undef USE_TUYA_MCU
|
|
#undef USE_PS_16_DZ
|
|
|
|
/********************************************************************************************/
|
|
// Supported hardware modules
|
|
enum SupportedModules {
|
|
WEMOS, ESP32_CAM_AITHINKER,
|
|
MAXMODULE};
|
|
|
|
const char kModuleNames[] PROGMEM =
|
|
"ESP32-DevKit|ESP32 Cam AiThinker";
|
|
|
|
// Default module settings
|
|
const uint8_t kModuleNiceList[MAXMODULE] PROGMEM = {
|
|
WEMOS,
|
|
ESP32_CAM_AITHINKER
|
|
};
|
|
|
|
const mytmplt kModules PROGMEM =
|
|
{ // WEMOS - Espressif ESP32-DevKitC - Any ESP32 device like WeMos and NodeMCU hardware (ESP32)
|
|
GPIO_USER, //0 (I)O GPIO0, ADC2_CH1, TOUCH1, RTC_GPIO11, CLK_OUT1, EMAC_TX_CLK
|
|
GPIO_USER, //1 IO TXD0 GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2
|
|
GPIO_USER, //2 IO GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0, SD_DATA0
|
|
GPIO_USER, //3 IO RXD0 GPIO3, U0RXD, CLK_OUT2
|
|
GPIO_USER, //4 IO GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1, SD_DATA1, EMAC_TX_ER
|
|
GPIO_USER, //5 IO GPIO5, VSPICS0, HS1_DATA6, EMAC_RX_CLK
|
|
//6 IO GPIO6, Flash CLK
|
|
//7 IO GPIO7, Flash D0
|
|
//8 IO GPIO8, Flash D1
|
|
//9 IO GPIO9, Flash D2
|
|
//10 IO GPIO10, Flash D3
|
|
//11 IO GPIO11, Flash CMD
|
|
GPIO_USER, //12 (I)O GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ, HS2_DATA2, SD_DATA2, EMAC_TXD3 (If driven High, flash voltage (VDD_SDIO) is 1.8V not default 3.3V. Has internal pull-down, so unconnected = Low = 3.3V. May prevent flashing and/or booting if 3.3V flash is connected and pulled high. See ESP32 datasheet for more details.)
|
|
GPIO_USER, //13 IO GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID, HS2_DATA3, SD_DATA3, EMAC_RX_ER
|
|
GPIO_USER, //14 IO GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK, HS2_CLK, SD_CLK, EMAC_TXD2
|
|
GPIO_USER, //15 (I)O GPIO15, ADC2_CH3, TOUCH3, MTDO, HSPICS0, RTC_GPIO13, HS2_CMD, SD_CMD, EMAC_RXD3 (If driven Low, silences boot messages from normal boot. Has internal pull-up, so unconnected = High = normal output.)
|
|
GPIO_USER, //16 IO GPIO16, HS1_DATA4, U2RXD, EMAC_CLK_OUT
|
|
GPIO_USER, //17 IO GPIO17, HS1_DATA5, U2TXD, EMAC_CLK_OUT_180
|
|
GPIO_USER, //18 IO GPIO18, VSPICLK, HS1_DATA7
|
|
GPIO_USER, //19 IO GPIO19, VSPIQ, U0CTS, EMAC_TXD0
|
|
0, //20
|
|
GPIO_USER, //21 IO GPIO21, VSPIHD, EMAC_TX_EN
|
|
GPIO_USER, //22 IO LED GPIO22, VSPIWP, U0RTS, EMAC_TXD1
|
|
GPIO_USER, //23 IO GPIO23, VSPID, HS1_STROBE
|
|
0, //24
|
|
GPIO_USER, //25 IO GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0
|
|
GPIO_USER, //26 IO GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1
|
|
GPIO_USER, //27 IO GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17, EMAC_RX_DV
|
|
0, //28
|
|
0, //29
|
|
0, //30
|
|
0, //31
|
|
GPIO_USER, //32 IO GPIO32, XTAL_32K_P (32.768 kHz crystal oscillator input), ADC1_CH4, TOUCH9, RTC_GPIO9
|
|
GPIO_USER, //33 IO GPIO33, XTAL_32K_N (32.768 kHz crystal oscillator output), ADC1_CH5, TOUCH8, RTC_GPIO8
|
|
GPIO_USER, //34 I NO PULLUP GPIO34, ADC1_CH6, RTC_GPIO4
|
|
GPIO_USER, //35 I NO PULLUP GPIO35, ADC1_CH7, RTC_GPIO5
|
|
GPIO_USER, //36 I NO PULLUP GPIO36, SENSOR_VP, ADC_H, ADC1_CH0, RTC_GPIO0
|
|
0, //37 NO PULLUP
|
|
0, //38 NO PULLUP
|
|
GPIO_USER, //39 I NO PULLUP GPIO39, SENSOR_VN, ADC1_CH3, ADC_H, RTC_GPIO3
|
|
0 // Flag
|
|
};
|
|
|
|
#endif // ESP32
|
|
|
|
#endif // _TASMOTA_TEMPLATE_ESP32_H_
|