Tasmota/tasmota/WiFiClientSecureLightBearSS...

1042 lines
35 KiB
C++
Executable File

/*
WiFiClientBearSSL- SSL client/server for esp8266 using BearSSL libraries
- Mostly compatible with Arduino WiFi shield library and standard
WiFiClient/ServerSecure (except for certificate handling).
Copyright (C) 2021 Earle F. Philhower, III
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "my_user_config.h"
#include "tasmota_configurations.h"
#if defined(USE_TLS)
// #define DEBUG_TLS
// #define DEBUG_ESP_SSL
#define LWIP_INTERNAL
#include <list>
#include <errno.h>
#include <algorithm>
#include "WiFiClientSecureLightBearSSL.h" // needs to be before "ESP8266WiFi.h" to avoid conflict with Arduino headers
#include "ESP8266WiFi.h"
#include "WiFiClient.h"
#include "StackThunk_light.h"
#include "lwip/opt.h"
#include "lwip/ip.h"
#include "lwip/tcp.h"
#include "lwip/inet.h"
#include "lwip/netif.h"
#ifdef ESP8266
#include <include/ClientContext.h>
#endif
#include "c_types.h"
#include <core_version.h>
#undef DEBUG_TLS
#ifdef DEBUG_TLS
#include "coredecls.h"
#define LOG_HEAP_SIZE(a) _Log_heap_size(a)
void _Log_heap_size(const char *msg) {
#ifdef ESP8266
register uint32_t *sp asm("a1");
int freestack = 4 * (sp - g_pcont->stack);
Serial.printf("%s %d, Fragmentation=%d, Thunkstack=%d, Free stack=%d, FreeContStack=%d\n",
msg, ESP.getFreeHeap(), ESP.getHeapFragmentation(), stack_thunk_light_get_max_usage(),
freestack, ESP.getFreeContStack());
#elif defined(ESP32)
Serial.printf("> Heap %s = %d\n", msg, uxTaskGetStackHighWaterMark(nullptr));
#endif
}
#else
#define LOG_HEAP_SIZE(a)
#endif
// get UTC time from Tasmota
extern uint32_t UtcTime(void);
extern uint32_t CfgTime(void);
#ifdef ESP8266 // Stack thunk is not needed with ESP32
// Stack thunked versions of calls
// Initially in BearSSLHelpers.h
extern "C" {
extern unsigned char *thunk_light_br_ssl_engine_recvapp_buf( const br_ssl_engine_context *cc, size_t *len);
extern void thunk_light_br_ssl_engine_recvapp_ack(br_ssl_engine_context *cc, size_t len);
extern unsigned char *thunk_light_br_ssl_engine_recvrec_buf( const br_ssl_engine_context *cc, size_t *len);
extern void thunk_light_br_ssl_engine_recvrec_ack(br_ssl_engine_context *cc, size_t len);
extern unsigned char *thunk_light_br_ssl_engine_sendapp_buf( const br_ssl_engine_context *cc, size_t *len);
extern void thunk_light_br_ssl_engine_sendapp_ack(br_ssl_engine_context *cc, size_t len);
extern unsigned char *thunk_light_br_ssl_engine_sendrec_buf( const br_ssl_engine_context *cc, size_t *len);
extern void thunk_light_br_ssl_engine_sendrec_ack(br_ssl_engine_context *cc, size_t len);
};
// Second stack thunked helpers
make_stack_thunk_light(br_ssl_engine_recvapp_ack);
make_stack_thunk_light(br_ssl_engine_recvapp_buf);
make_stack_thunk_light(br_ssl_engine_recvrec_ack);
make_stack_thunk_light(br_ssl_engine_recvrec_buf);
make_stack_thunk_light(br_ssl_engine_sendapp_ack);
make_stack_thunk_light(br_ssl_engine_sendapp_buf);
make_stack_thunk_light(br_ssl_engine_sendrec_ack);
make_stack_thunk_light(br_ssl_engine_sendrec_buf);
// create new version of Thunk function to store on SYS stack
// unless the Thunk was initialized. Thanks to AES128 GCM, we can keep
// symetric processing on the stack
void min_br_ssl_engine_recvapp_ack(br_ssl_engine_context *cc, size_t len) {
if (stack_thunk_light_get_refcnt()) {
return thunk_light_br_ssl_engine_recvapp_ack(cc, len);
} else {
return br_ssl_engine_recvapp_ack(cc, len);
}
}
unsigned char *min_br_ssl_engine_recvapp_buf(const br_ssl_engine_context *cc, size_t *len) {
if (stack_thunk_light_get_refcnt()) {
return thunk_light_br_ssl_engine_recvapp_buf(cc, len);
} else {
return br_ssl_engine_recvapp_buf(cc, len);
}
}
void min_br_ssl_engine_recvrec_ack(br_ssl_engine_context *cc, size_t len) {
if (stack_thunk_light_get_refcnt()) {
return thunk_light_br_ssl_engine_recvrec_ack(cc, len);
} else {
return br_ssl_engine_recvrec_ack(cc, len);
}
}
unsigned char *min_br_ssl_engine_recvrec_buf(const br_ssl_engine_context *cc, size_t *len) {
if (stack_thunk_light_get_refcnt()) {
return thunk_light_br_ssl_engine_recvrec_buf(cc, len);
} else {
return br_ssl_engine_recvrec_buf(cc, len);
}
}
void min_br_ssl_engine_sendapp_ack(br_ssl_engine_context *cc, size_t len) {
if (stack_thunk_light_get_refcnt()) {
return thunk_light_br_ssl_engine_sendapp_ack(cc, len);
} else {
return br_ssl_engine_sendapp_ack(cc, len);
}
}
unsigned char *min_br_ssl_engine_sendapp_buf(const br_ssl_engine_context *cc, size_t *len) {
if (stack_thunk_light_get_refcnt()) {
return thunk_light_br_ssl_engine_sendapp_buf(cc, len);
} else {
return br_ssl_engine_sendapp_buf(cc, len);
}
}
void min_br_ssl_engine_sendrec_ack(br_ssl_engine_context *cc, size_t len) {
if (stack_thunk_light_get_refcnt()) {
return thunk_light_br_ssl_engine_sendrec_ack(cc, len);
} else {
return br_ssl_engine_sendrec_ack(cc, len);
}
}
unsigned char *min_br_ssl_engine_sendrec_buf(const br_ssl_engine_context *cc, size_t *len) {
if (stack_thunk_light_get_refcnt()) {
return thunk_light_br_ssl_engine_sendrec_buf(cc, len);
} else {
return br_ssl_engine_sendrec_buf(cc, len);
}
}
// Use min_ instead of original thunk_
#define br_ssl_engine_recvapp_ack min_br_ssl_engine_recvapp_ack
#define br_ssl_engine_recvapp_buf min_br_ssl_engine_recvapp_buf
#define br_ssl_engine_recvrec_ack min_br_ssl_engine_recvrec_ack
#define br_ssl_engine_recvrec_buf min_br_ssl_engine_recvrec_buf
#define br_ssl_engine_sendapp_ack min_br_ssl_engine_sendapp_ack
#define br_ssl_engine_sendapp_buf min_br_ssl_engine_sendapp_buf
#define br_ssl_engine_sendrec_ack min_br_ssl_engine_sendrec_ack
#define br_ssl_engine_sendrec_buf min_br_ssl_engine_sendrec_buf
#endif // ESP8266
//#define DEBUG_ESP_SSL
#ifdef DEBUG_ESP_SSL
//#define DEBUG_BSSL(fmt, ...) DEBUG_ESP_PORT.printf_P((PGM_P)PSTR( "BSSL:" fmt), ## __VA_ARGS__)
#define DEBUG_BSSL(fmt, ...) Serial.printf(fmt, ## __VA_ARGS__)
#else
#define DEBUG_BSSL(...)
#endif
namespace BearSSL {
void WiFiClientSecure_light::_clear() {
// TLS handshake may take more than the 5 second default timeout
_timeout = 10000; // 10 seconds max, it should never go over 6 seconds
_sc = nullptr;
_ctx_present = false;
_eng = nullptr;
_iobuf_in = nullptr;
_iobuf_out = nullptr;
setBufferSizes(1024, 1024); // reasonable minimum
_handshake_done = false;
_last_error = 0;
_recvapp_buf = nullptr;
_recvapp_len = 0;
_fingerprint_any = true; // by default accept all fingerprints
_fingerprint1 = nullptr;
_fingerprint2 = nullptr;
_chain_P = nullptr;
_sk_ec_P = nullptr;
_ta_P = nullptr;
_ta_size = 0;
_max_thunkstack_use = 0;
}
// Constructor
WiFiClientSecure_light::WiFiClientSecure_light(int recv, int xmit) : WiFiClient() {
_clear();
// LOG_HEAP_SIZE("StackThunk before");
//stack_thunk_light_add_ref();
// LOG_HEAP_SIZE("StackThunk after");
// now finish the setup
setBufferSizes(recv, xmit); // reasonable minimum
allocateBuffers();
}
WiFiClientSecure_light::~WiFiClientSecure_light() {
#ifdef ESP8266
if (_client) {
_client->unref();
_client = nullptr;
}
#elif defined(ESP32)
stop();
#endif
//_cipher_list = nullptr; // std::shared will free if last reference
_freeSSL();
}
void WiFiClientSecure_light::allocateBuffers(void) {
// We prefer to allocate all buffers at start, rather than lazy allocation and deallocation
// in the long run it avoids heap fragmentation and improves stability
LOG_HEAP_SIZE("allocateBuffers before");
_sc = std::make_shared<br_ssl_client_context>();
LOG_HEAP_SIZE("allocateBuffers ClientContext");
_iobuf_in = std::shared_ptr<unsigned char>(new unsigned char[_iobuf_in_size], std::default_delete<unsigned char[]>());
_iobuf_out = std::shared_ptr<unsigned char>(new unsigned char[_iobuf_out_size], std::default_delete<unsigned char[]>());
LOG_HEAP_SIZE("allocateBuffers after");
}
void WiFiClientSecure_light::setClientECCert(const br_x509_certificate *cert, const br_ec_private_key *sk,
unsigned allowed_usages, unsigned cert_issuer_key_type) {
_chain_P = cert;
_sk_ec_P = sk;
_allowed_usages = allowed_usages;
_cert_issuer_key_type = cert_issuer_key_type;
}
void WiFiClientSecure_light::setTrustAnchor(const br_x509_trust_anchor *ta, size_t ta_size) {
_ta_P = ta;
_ta_size = ta_size;
}
void WiFiClientSecure_light::setBufferSizes(int recv, int xmit) {
// Following constants taken from bearssl/src/ssl/ssl_engine.c (not exported unfortunately)
const int MAX_OUT_OVERHEAD = 85;
const int MAX_IN_OVERHEAD = 325;
// The data buffers must be between 512B and 16KB
recv = std::max(512, std::min(16384, recv));
xmit = std::max(512, std::min(16384, xmit));
// Add in overhead for SSL protocol
recv += MAX_IN_OVERHEAD;
xmit += MAX_OUT_OVERHEAD;
_iobuf_in_size = recv;
_iobuf_out_size = xmit;
}
#ifdef ESP8266
bool WiFiClientSecure_light::stop(unsigned int maxWaitMs) {
bool ret = WiFiClient::stop(maxWaitMs); // calls our virtual flush()
_freeSSL();
return ret;
}
bool WiFiClientSecure_light::flush(unsigned int maxWaitMs) {
(void) _run_until(BR_SSL_SENDAPP);
return WiFiClient::flush(maxWaitMs);
}
#elif defined(ESP32)
void WiFiClientSecure_light::stop(void) {
WiFiClient::stop(); // calls our virtual flush()
_freeSSL();
}
void WiFiClientSecure_light::flush(void) {
(void) _run_until(BR_SSL_SENDAPP);
WiFiClient::flush();
}
#endif
int WiFiClientSecure_light::connect(IPAddress ip, uint16_t port) {
DEBUG_BSSL("connect(%s,%d)", ip.toString().c_str(), port);
clearLastError();
if (!WiFiClient::connect(ip, port)) {
setLastError(ERR_TCP_CONNECT);
return 0;
}
return _connectSSL(nullptr);
}
int WiFiClientSecure_light::connect(const char* name, uint16_t port) {
DEBUG_BSSL("connect(%s,%d)\n", name, port);
IPAddress remote_addr;
clearLastError();
if (!WiFi.hostByName(name, remote_addr)) {
DEBUG_BSSL("connect: Name loopup failure\n");
setLastError(ERR_CANT_RESOLVE_IP);
return 0;
}
DEBUG_BSSL("connect(%s,%d)\n", remote_addr.toString().c_str(), port);
if (!WiFiClient::connect(remote_addr, port)) {
DEBUG_BSSL("connect: Unable to connect TCP socket\n");
_last_error = ERR_TCP_CONNECT;
return 0;
}
LOG_HEAP_SIZE("Before calling _connectSSL");
return _connectSSL(name);
}
void WiFiClientSecure_light::_freeSSL() {
_ctx_present = false;
_recvapp_buf = nullptr;
_recvapp_len = 0;
// This connection is toast
_handshake_done = false;
}
bool WiFiClientSecure_light::_clientConnected() {
#ifdef ESP8266
return (_client && _client->state() == ESTABLISHED);
#elif defined(ESP32)
return WiFiClient::connected();
#endif
}
uint8_t WiFiClientSecure_light::connected() {
if (available() || (_clientConnected() && _handshake_done)) {
return true;
}
return false;
}
size_t WiFiClientSecure_light::_write(const uint8_t *buf, size_t size, bool pmem) {
size_t sent_bytes = 0;
if (!connected() || !size || !_handshake_done) {
return 0;
}
do {
// Ensure we yield if we need multiple fragments to avoid WDT
if (sent_bytes) {
optimistic_yield(1000);
}
// Get BearSSL to a state where we can send
if (_run_until(BR_SSL_SENDAPP) < 0) {
break;
}
if (br_ssl_engine_current_state(_eng) & BR_SSL_SENDAPP) {
size_t sendapp_len;
unsigned char *sendapp_buf = br_ssl_engine_sendapp_buf(_eng, &sendapp_len);
int to_send = size > sendapp_len ? sendapp_len : size;
if (pmem) {
memcpy_P(sendapp_buf, buf, to_send);
} else {
memcpy(sendapp_buf, buf, to_send);
}
br_ssl_engine_sendapp_ack(_eng, to_send);
br_ssl_engine_flush(_eng, 0);
flush();
buf += to_send;
sent_bytes += to_send;
size -= to_send;
} else {
break;
}
} while (size);
LOG_HEAP_SIZE("_write");
return sent_bytes;
}
size_t WiFiClientSecure_light::write(const uint8_t *buf, size_t size) {
return _write(buf, size, false);
}
size_t WiFiClientSecure_light::write_P(PGM_P buf, size_t size) {
return _write((const uint8_t *)buf, size, true);
}
// We have to manually read and send individual chunks.
size_t WiFiClientSecure_light::write(Stream& stream) {
size_t totalSent = 0;
size_t countRead;
size_t countSent;
if (!connected() || !_handshake_done) {
DEBUG_BSSL("write: Connect/handshake not completed yet\n");
return 0;
}
do {
uint8_t temp[256]; // Temporary chunk size same as ClientContext
countSent = 0;
countRead = stream.readBytes(temp, sizeof(temp));
if (countRead) {
countSent = _write((const uint8_t*)temp, countRead, true);
totalSent += countSent;
}
yield(); // Feed the WDT
} while ((countSent == countRead) && (countSent > 0));
return totalSent;
}
int WiFiClientSecure_light::read(uint8_t *buf, size_t size) {
if (!ctx_present() || !_handshake_done) {
return -1;
}
int avail = available();
bool conn = connected();
if (!avail && conn) {
return 0; // We're still connected, but nothing to read
}
if (!avail && !conn) {
DEBUG_BSSL("read: Not connected, none left available\n");
return -1;
}
if (avail) {
// Take data from the recvapp buffer
int to_copy = _recvapp_len < size ? _recvapp_len : size;
memcpy(buf, _recvapp_buf, to_copy);
br_ssl_engine_recvapp_ack(_eng, to_copy);
_recvapp_buf = nullptr;
_recvapp_len = 0;
return to_copy;
}
if (!conn) {
DEBUG_BSSL("read: Not connected\n");
return -1;
}
return 0; // If we're connected, no error but no read.
}
int WiFiClientSecure_light::read() {
uint8_t c;
if (1 == read(&c, 1)) {
return c;
}
DEBUG_BSSL("read: failed\n");
return -1;
}
int WiFiClientSecure_light::available() {
if (_recvapp_buf) {
return _recvapp_len; // Anything from last call?
}
_recvapp_buf = nullptr;
_recvapp_len = 0;
if (!ctx_present() || _run_until(BR_SSL_RECVAPP, false) < 0) {
return 0;
}
int st = br_ssl_engine_current_state(_eng);
if (st == BR_SSL_CLOSED) {
return 0; // Nothing leftover, SSL is closed
}
if (st & BR_SSL_RECVAPP) {
_recvapp_buf = br_ssl_engine_recvapp_buf(_eng, &_recvapp_len);
return _recvapp_len;
}
return 0;
}
int WiFiClientSecure_light::peek() {
if (!ctx_present() || !available()) {
DEBUG_BSSL("peek: Not connected, none left available\n");
return -1;
}
if (_recvapp_buf && _recvapp_len) {
return _recvapp_buf[0];
}
DEBUG_BSSL("peek: No data left\n");
return -1;
}
size_t WiFiClientSecure_light::peekBytes(uint8_t *buffer, size_t length) {
size_t to_copy = 0;
if (!ctx_present()) {
DEBUG_BSSL("peekBytes: Not connected\n");
return 0;
}
_startMillis = millis();
while ((available() < (int) length) && ((millis() - _startMillis) < 5000)) {
yield();
}
to_copy = _recvapp_len < length ? _recvapp_len : length;
memcpy(buffer, _recvapp_buf, to_copy);
return to_copy;
}
/* --- Copied almost verbatim from BEARSSL SSL_IO.C ---
Run the engine, until the specified target state is achieved, or
an error occurs. The target state is SENDAPP, RECVAPP, or the
combination of both (the combination matches either). When a match is
achieved, this function returns 0. On error, it returns -1.
*/
int WiFiClientSecure_light::_run_until(unsigned target, bool blocking) {
//LOG_HEAP_SIZE("_run_until 1");
if (!ctx_present()) {
DEBUG_BSSL("_run_until: Not connected\n");
return -1;
}
for (int no_work = 0; blocking || no_work < 2;) {
if (blocking) {
// Only for blocking operations can we afford to yield()
optimistic_yield(100);
}
int state;
state = br_ssl_engine_current_state(_eng);
if (state & BR_SSL_CLOSED) {
return -1;
}
#ifdef ESP8266
if (!(_client->state() == ESTABLISHED) && !WiFiClient::available()) {
return (state & target) ? 0 : -1;
}
#elif defined(ESP32)
if (!_clientConnected() && !WiFiClient::available()) {
return (state & target) ? 0 : -1;
}
#endif
/*
If there is some record data to send, do it. This takes
precedence over everything else.
*/
if (state & BR_SSL_SENDREC) {
unsigned char *buf;
size_t len;
int wlen;
buf = br_ssl_engine_sendrec_buf(_eng, &len);
wlen = WiFiClient::write(buf, len);
if (wlen <= 0) {
/*
If we received a close_notify and we
still send something, then we have our
own response close_notify to send, and
the peer is allowed by RFC 5246 not to
wait for it.
*/
return -1;
}
if (wlen > 0) {
br_ssl_engine_sendrec_ack(_eng, wlen);
}
no_work = 0;
continue;
}
/*
If we reached our target, then we are finished.
*/
if (state & target) {
return 0;
}
/*
If some application data must be read, and we did not
exit, then this means that we are trying to write data,
and that's not possible until the application data is
read. This may happen if using a shared in/out buffer,
and the underlying protocol is not strictly half-duplex.
This is unrecoverable here, so we report an error.
*/
if (state & BR_SSL_RECVAPP) {
DEBUG_BSSL("_run_until: Fatal protocol state\n");
return -1;
}
/*
If we reached that point, then either we are trying
to read data and there is some, or the engine is stuck
until a new record is obtained.
*/
if (state & BR_SSL_RECVREC) {
if (WiFiClient::available()) {
unsigned char *buf;
size_t len;
int rlen;
buf = br_ssl_engine_recvrec_buf(_eng, &len);
rlen = WiFiClient::read(buf, len);
if (rlen < 0) {
return -1;
}
if (rlen > 0) {
br_ssl_engine_recvrec_ack(_eng, rlen);
}
no_work = 0;
continue;
}
}
/*
We can reach that point if the target RECVAPP, and
the state contains SENDAPP only. This may happen with
a shared in/out buffer. In that case, we must flush
the buffered data to "make room" for a new incoming
record.
*/
br_ssl_engine_flush(_eng, 0);
no_work++; // We didn't actually advance here
}
// We only get here if we ran through the loop without getting anything done
return -1;
}
bool WiFiClientSecure_light::_wait_for_handshake() {
_handshake_done = false;
while (!_handshake_done && _clientConnected()) {
int ret = _run_until(BR_SSL_SENDAPP);
if (ret < 0) {
DEBUG_BSSL("_wait_for_handshake: failed\n");
break;
}
if (br_ssl_engine_current_state(_eng) & BR_SSL_SENDAPP) {
_handshake_done = true;
}
optimistic_yield(1000);
}
return _handshake_done;
}
static uint8_t htoi (unsigned char c)
{
if (c>='0' && c <='9') return c - '0';
else if (c>='A' && c<='F') return 10 + c - 'A';
else if (c>='a' && c<='f') return 10 + c - 'a';
else return 255;
}
extern "C" {
// see https://stackoverflow.com/questions/6357031/how-do-you-convert-a-byte-array-to-a-hexadecimal-string-in-c
void tohex(unsigned char * in, size_t insz, char * out, size_t outsz) {
unsigned char * pin = in;
static const char * hex = "0123456789ABCDEF";
char * pout = out;
for(; pin < in+insz; pout +=3, pin++){
pout[0] = hex[(*pin>>4) & 0xF];
pout[1] = hex[ *pin & 0xF];
pout[2] = ':';
if (pout + 3 - out > outsz){
/* Better to truncate output string than overflow buffer */
/* it would be still better to either return a status */
/* or ensure the target buffer is large enough and it never happen */
break;
}
}
pout[-1] = 0;
}
// BearSSL doesn't define a true insecure decoder, so we make one ourselves
// from the simple parser. It generates the issuer and subject hashes and
// the SHA1 fingerprint, only one (or none!) of which will be used to
// "verify" the certificate.
// Private x509 decoder state
struct br_x509_pubkeyfingerprint_context {
const br_x509_class *vtable;
bool done_cert; // did we parse the first cert already?
bool fingerprint_all;
uint8_t *pubkey_recv_fingerprint;
const uint8_t *fingerprint1;
const uint8_t *fingerprint2;
unsigned usages; // pubkey usage
br_x509_decoder_context ctx; // defined in BearSSL
};
// Callback on the first byte of any certificate
static void pubkeyfingerprint_start_chain(const br_x509_class **ctx, const char *server_name) {
br_x509_pubkeyfingerprint_context *xc = (br_x509_pubkeyfingerprint_context *)ctx;
// Don't process anything but the first certificate in the chain
if (!xc->done_cert) {
br_x509_decoder_init(&xc->ctx, nullptr, nullptr, nullptr, nullptr);
}
(void)server_name; // ignore server name
}
// Callback for each certificate present in the chain (but only operates
// on the first one by design).
static void pubkeyfingerprint_start_cert(const br_x509_class **ctx, uint32_t length) {
(void) ctx; // do nothing
(void) length;
}
// Callback for each byte stream in the chain. Only process first cert.
static void pubkeyfingerprint_append(const br_x509_class **ctx, const unsigned char *buf, size_t len) {
br_x509_pubkeyfingerprint_context *xc = (br_x509_pubkeyfingerprint_context *)ctx;
// Don't process anything but the first certificate in the chain
if (!xc->done_cert) {
br_x509_decoder_push(&xc->ctx, (const void*)buf, len);
}
}
// Callback on individual cert end.
static void pubkeyfingerprint_end_cert(const br_x509_class **ctx) {
br_x509_pubkeyfingerprint_context *xc = (br_x509_pubkeyfingerprint_context *)ctx;
xc->done_cert = true; // first cert already processed
}
// **** Start patch Castellucci
/*
static void pubkeyfingerprint_pubkey_fingerprint(br_sha1_context *shactx, br_rsa_public_key rsakey) {
br_sha1_init(shactx);
br_sha1_update(shactx, "ssh-rsa", 7); // tag
br_sha1_update(shactx, rsakey.e, rsakey.elen); // exponent
br_sha1_update(shactx, rsakey.n, rsakey.nlen); // modulus
}
*/
// If `compat` id false, adds a u32be length prefixed value to the sha1 state.
// If `compat` is true, the length will be omitted for compatibility with
// data from older versions of Tasmota.
static void sha1_update_len(br_sha1_context *shactx, const void *msg, uint32_t len, bool compat) {
uint8_t buf[] = {0, 0, 0, 0};
if (!compat) {
buf[0] = (len >> 24) & 0xff;
buf[1] = (len >> 16) & 0xff;
buf[2] = (len >> 8) & 0xff;
buf[3] = (len >> 0) & 0xff;
br_sha1_update(shactx, buf, 4); // length
}
br_sha1_update(shactx, msg, len); // message
}
// Update the received fingerprint based on the certificate's public key.
// If `compat` is true, an insecure version of the fingerprint will be
// calcualted for compatibility with older versions of Tasmota. Normally,
// `compat` should be false.
static void pubkeyfingerprint_pubkey_fingerprint(br_x509_pubkeyfingerprint_context *xc, bool compat) {
br_rsa_public_key rsakey = xc->ctx.pkey.key.rsa;
br_sha1_context shactx;
br_sha1_init(&shactx);
sha1_update_len(&shactx, "ssh-rsa", 7, compat); // tag
sha1_update_len(&shactx, rsakey.e, rsakey.elen, compat); // exponent
sha1_update_len(&shactx, rsakey.n, rsakey.nlen, compat); // modulus
br_sha1_out(&shactx, xc->pubkey_recv_fingerprint); // copy to fingerprint
}
// **** End patch Castellucci
// Callback when complete chain has been parsed.
// Return 0 on validation success, !0 on validation error
static unsigned pubkeyfingerprint_end_chain(const br_x509_class **ctx) {
br_x509_pubkeyfingerprint_context *xc = (br_x509_pubkeyfingerprint_context *)ctx;
// **** Start patch Castellucci
/*
br_sha1_context sha1_context;
pubkeyfingerprint_pubkey_fingerprint(&sha1_context, xc->ctx.pkey.key.rsa);
br_sha1_out(&sha1_context, xc->pubkey_recv_fingerprint); // copy to fingerprint
if (!xc->fingerprint_all) {
if (0 == memcmp_P(xc->pubkey_recv_fingerprint, xc->fingerprint1, 20)) {
return 0;
}
if (0 == memcmp_P(xc->pubkey_recv_fingerprint, xc->fingerprint2, 20)) {
return 0;
}
return 1; // no match, error
} else {
// Default (no validation at all) or no errors in prior checks = success.
return 0;
}
*/
// set fingerprint status byte to zero
// FIXME: find a better way to pass this information
xc->pubkey_recv_fingerprint[20] = 0;
// Try matching using the the new fingerprint algorithm
pubkeyfingerprint_pubkey_fingerprint(xc, false);
if (!xc->fingerprint_all) {
if (0 == memcmp_P(xc->pubkey_recv_fingerprint, xc->fingerprint1, 20)) {
return 0;
}
if (0 == memcmp_P(xc->pubkey_recv_fingerprint, xc->fingerprint2, 20)) {
return 0;
}
#ifndef USE_MQTT_TLS_DROP_OLD_FINGERPRINT
// No match under new algorithm, do some basic checking on the key.
//
// RSA keys normally have an e value of 65537, which is three bytes long.
// Other e values are suspicious, but if the modulus is a standard size
// (multiple of 512 bits/64 bytes), any public exponent up to eight bytes
// long will be allowed.
//
// A legitimate key could possibly be marked as bad by this check, but
// the user would have had to really worked at making a strange key.
if (!(xc->ctx.pkey.key.rsa.elen == 3
&& xc->ctx.pkey.key.rsa.e[0] == 1
&& xc->ctx.pkey.key.rsa.e[1] == 0
&& xc->ctx.pkey.key.rsa.e[2] == 1)) {
if (xc->ctx.pkey.key.rsa.nlen & 63 != 0 || xc->ctx.pkey.key.rsa.elen > 8) {
return 2; // suspicious key, return error
}
}
// try the old algorithm and potentially mark for update
pubkeyfingerprint_pubkey_fingerprint(xc, true);
if (0 == memcmp_P(xc->pubkey_recv_fingerprint, xc->fingerprint1, 20)) {
xc->pubkey_recv_fingerprint[20] |= 1; // mark for update
}
if (0 == memcmp_P(xc->pubkey_recv_fingerprint, xc->fingerprint2, 20)) {
xc->pubkey_recv_fingerprint[20] |= 2; // mark for update
}
if (!xc->pubkey_recv_fingerprint[20]) {
return 1; // not marked for update because no match, error
}
// the old fingerprint format matched, recompute new one for update
pubkeyfingerprint_pubkey_fingerprint(xc, false);
return 0;
#else // USE_TLS_OLD_FINGERPRINT_COMPAT
return 1; // no match, error
#endif // USE_TLS_OLD_FINGERPRINT_COMPAT
} else {
// Default (no validation at all) or no errors in prior checks = success.
return 0;
}
// **** End patch Castellucci
}
// Return the public key from the validator (set by x509_minimal)
static const br_x509_pkey *pubkeyfingerprint_get_pkey(const br_x509_class *const *ctx, unsigned *usages) {
const br_x509_pubkeyfingerprint_context *xc = (const br_x509_pubkeyfingerprint_context *)ctx;
if (usages != NULL) {
*usages = BR_KEYTYPE_KEYX | BR_KEYTYPE_SIGN; // I said we were insecure!
}
return &xc->ctx.pkey;
}
// Set up the x509 insecure data structures for BearSSL core to use.
void br_x509_pubkeyfingerprint_init(br_x509_pubkeyfingerprint_context *ctx,
const uint8_t *fingerprint1, const uint8_t *fingerprint2,
uint8_t *recv_fingerprint,
bool fingerprint_all) {
static const br_x509_class br_x509_pubkeyfingerprint_vtable PROGMEM = {
sizeof(br_x509_pubkeyfingerprint_context),
pubkeyfingerprint_start_chain,
pubkeyfingerprint_start_cert,
pubkeyfingerprint_append,
pubkeyfingerprint_end_cert,
pubkeyfingerprint_end_chain,
pubkeyfingerprint_get_pkey
};
memset(ctx, 0, sizeof * ctx);
ctx->vtable = &br_x509_pubkeyfingerprint_vtable;
ctx->done_cert = false;
ctx->fingerprint1 = fingerprint1;
ctx->fingerprint2 = fingerprint2;
ctx->pubkey_recv_fingerprint = recv_fingerprint;
ctx->fingerprint_all = fingerprint_all;
}
// We limit to a single cipher to reduce footprint
// we reference it, don't put in PROGMEM
static const uint16_t suites[] = {
#ifdef USE_MQTT_TLS_FORCE_EC_CIPHER
BR_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256
#else
BR_TLS_RSA_WITH_AES_128_GCM_SHA256
#endif
};
// Default initializion for our SSL clients
static void br_ssl_client_base_init(br_ssl_client_context *cc) {
br_ssl_client_zero(cc);
// forbid SSL renegotiation, as we free the Private Key after handshake
br_ssl_engine_add_flags(&cc->eng, BR_OPT_NO_RENEGOTIATION);
br_ssl_engine_set_versions(&cc->eng, BR_TLS12, BR_TLS12);
br_ssl_engine_set_suites(&cc->eng, suites, (sizeof suites) / (sizeof suites[0]));
br_ssl_client_set_default_rsapub(cc);
br_ssl_engine_set_default_rsavrfy(&cc->eng);
// install hashes
br_ssl_engine_set_hash(&cc->eng, br_sha256_ID, &br_sha256_vtable);
br_ssl_engine_set_prf_sha256(&cc->eng, &br_tls12_sha256_prf);
// AES CTR/GCM small version, not contstant time (we don't really care here as there is no TPM anyways)
br_ssl_engine_set_gcm(&cc->eng, &br_sslrec_in_gcm_vtable, &br_sslrec_out_gcm_vtable);
br_ssl_engine_set_aes_ctr(&cc->eng, &br_aes_small_ctr_vtable);
br_ssl_engine_set_ghash(&cc->eng, &br_ghash_ctmul32);
#ifdef USE_MQTT_TLS_FORCE_EC_CIPHER
// we support only P256 EC curve for AWS IoT, no EC curve for Letsencrypt unless forced
br_ssl_engine_set_ec(&cc->eng, &br_ec_p256_m15); // TODO
#endif
static const char * alpn_mqtt = "mqtt";
br_ssl_engine_set_protocol_names(&cc->eng, &alpn_mqtt, 1);
}
}
// Called by connect() to do the actual SSL setup and handshake.
// Returns if the SSL handshake succeeded.
bool WiFiClientSecure_light::_connectSSL(const char* hostName) {
// Validation context, either full CA validation or checking only fingerprints
#ifdef USE_MQTT_TLS_CA_CERT
br_x509_minimal_context *x509_minimal;
#else
br_x509_pubkeyfingerprint_context *x509_insecure;
#endif
LOG_HEAP_SIZE("_connectSSL.start");
do { // used to exit on Out of Memory error and keep all cleanup code at the same place
// ============================================================
// allocate Thunk stack, move to alternate stack and initialize
#ifdef ESP8266
stack_thunk_light_add_ref();
#endif // ESP8266
LOG_HEAP_SIZE("Thunk allocated");
DEBUG_BSSL("_connectSSL: start connection\n");
_freeSSL();
clearLastError();
#ifdef ESP8266
if (!stack_thunk_light_get_stack_bot()) break;
#endif // ESP8266
_ctx_present = true;
_eng = &_sc->eng; // Allocation/deallocation taken care of by the _sc shared_ptr
br_ssl_client_base_init(_sc.get());
// ============================================================
// Allocatte and initialize Decoder Context
LOG_HEAP_SIZE("_connectSSL before DecoderContext allocation");
// Only failure possible in the installation is OOM
#ifdef USE_MQTT_TLS_CA_CERT
x509_minimal = (br_x509_minimal_context*) malloc(sizeof(br_x509_minimal_context));
if (!x509_minimal) break;
br_x509_minimal_init(x509_minimal, &br_sha256_vtable, _ta_P, _ta_size);
br_x509_minimal_set_rsa(x509_minimal, br_ssl_engine_get_rsavrfy(_eng));
br_x509_minimal_set_hash(x509_minimal, br_sha256_ID, &br_sha256_vtable);
br_ssl_engine_set_x509(_eng, &x509_minimal->vtable);
uint32_t now = UtcTime();
uint32_t cfg_time = CfgTime();
if (cfg_time > now) { now = cfg_time; }
br_x509_minimal_set_time(x509_minimal, now / 86400 + 719528, now % 86400);
#else
x509_insecure = (br_x509_pubkeyfingerprint_context*) malloc(sizeof(br_x509_pubkeyfingerprint_context));
//x509_insecure = std::unique_ptr<br_x509_pubkeyfingerprint_context>(new br_x509_pubkeyfingerprint_context);
if (!x509_insecure) break;
br_x509_pubkeyfingerprint_init(x509_insecure, _fingerprint1, _fingerprint2, _recv_fingerprint, _fingerprint_any);
br_ssl_engine_set_x509(_eng, &x509_insecure->vtable);
#endif
LOG_HEAP_SIZE("_connectSSL after DecoderContext allocation");
// ============================================================
// Set send/receive buffers
br_ssl_engine_set_buffers_bidi(_eng, _iobuf_in.get(), _iobuf_in_size, _iobuf_out.get(), _iobuf_out_size);
// ============================================================
// allocate Private key if needed, only if USE_MQTT_AWS_IOT
LOG_HEAP_SIZE("_connectSSL before PrivKey allocation");
#ifdef USE_MQTT_AWS_IOT
// ============================================================
// Set the EC Private Key, only USE_MQTT_AWS_IOT
// limited to P256 curve
br_ssl_client_set_single_ec(_sc.get(), _chain_P, 1,
_sk_ec_P, _allowed_usages,
_cert_issuer_key_type, &br_ec_p256_m15, br_ecdsa_sign_asn1_get_default());
#endif // USE_MQTT_AWS_IOT
// ============================================================
// Start TLS connection, ALL
if (!br_ssl_client_reset(_sc.get(), hostName, 0)) break;
auto ret = _wait_for_handshake();
#ifdef DEBUG_ESP_SSL
if (!ret) {
DEBUG_BSSL("Couldn't connect. Error = %d\n", getLastError());
} else {
DEBUG_BSSL("Connected! MFLNStatus = %d\n", getMFLNStatus());
}
#endif
LOG_HEAP_SIZE("_connectSSL.end");
#ifdef ESP8266
_max_thunkstack_use = stack_thunk_light_get_max_usage();
stack_thunk_light_del_ref();
//stack_thunk_light_repaint();
LOG_HEAP_SIZE("_connectSSL.end, freeing StackThunk");
#endif // ESP8266
#ifdef USE_MQTT_TLS_CA_CERT
free(x509_minimal);
#else
free(x509_insecure);
#endif
LOG_HEAP_SIZE("_connectSSL after release of Priv Key");
return ret;
} while (0);
// ============================================================
// if we arrived here, this means we had an OOM error, cleaning up
setLastError(ERR_OOM);
DEBUG_BSSL("_connectSSL: Out of memory\n");
#ifdef ESP8266
stack_thunk_light_del_ref();
#endif
#ifdef USE_MQTT_TLS_CA_CERT
free(x509_minimal);
#else
free(x509_insecure);
#endif
LOG_HEAP_SIZE("_connectSSL clean_on_error");
return false;
}
};
#include "t_bearssl_tasmota_config.h"
#endif // USE_TLS