mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Tasmota/tasmota/xdrv_85_esp32_ble_eq3_trv.ino

1783 lines
48 KiB
C++
Raw Blame History

/*
xdrv_85_esp32_ble_eq3_trv.ino - EQ3 radiator valve sense and control via BLE_ESP32 support for Tasmota
Copyright (C) 2020 Simon Hailes
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
--------------------------------------------------------------------------------------------
Version yyyymmdd Action Description
--------------------------------------------------------------------------------------------
1.0.0.0 20210910 publish - renamed to xdrv_85, and checked with TAS latest dev branch
0.0.0.0 20201213 created - initial version
*/
/*
Commands:
e.g.
trv 001A22092EE0 settemp 22.5
trvperiod n - set polling period in seconds (default teleperiod at boot)
trvonlyaliased *0/1 - only hear devices with BLEAlias set
trvMatchPrefix 0/*1 - if set, then it will add trvs to the seen list which have mac starting with :
macs in macprefixes, currently only 001a22
Note: anything with BLEAlias starting "EQ3" will be added to the seen list.
trvHideFailedPoll 0/*1 - if set, then failed polls will not be sent to EQ3
trvMinRSSI -n - the minimum RSSI value at which to attempt to poll
trv reset - clear device list
trv devlist - report seen devices. Active scanning required, not passive, as it looks for names
trv scan - same as devlist
trv <mac> state - report general state (see below for MQTT)
trv <mac> raw <hex to send> - send a raw command
trv <mac> on - set temp to 30 -> display ON on EQ3
trv <mac> off - set temp to 4.5 -> display OFF on EQ3
trv <mac> boost - set boost
trv <mac> unboost - turn off boost
trv <mac> lock - manual lock of physical buttons
trv <mac> unlock - manual unlock of physical buttons
trv <mac> auto - set EQ3 to auto mode
trv <mac> manual - set EQ3 to manual mode
trv <mac> mode auto|manual - set EQ3 to mode auto|manual?
trv <mac> day - set EQ3 to day temp
trv <mac> night - set EQ3 to night temp
trv <mac> settemp 20.5 - set EQ3 to temp
trv <mac> settime - set time to Tasmota time (untested)
trv <mac> settime <hex as per esp32_mqtt_eq3> - set time
trv <mac> offset 1.5 - set offset temp
trv <mac> setdaynight 22 17.5 - set day and night mode temps
trv <mac> setwindowtempdur 12.5 30 - set window open temp and duration in mins
trv <mac> reqprofile <0-6> - request a profile for a day fo the week.
trv <mac> setprofile <0-6> 20.5-07:30,17-17:00,22.5-22:00,17-24:00 (up to 7 temp-HH:MM) - set a profile for a day fo the week.
Responses:
normal:
stat/EQ3/001A22092C9A = {
"cmd":"state",
"result":"ok",
"RSSI":-83,
"stattime":1613814193,
"temp":21.0,
"posn":0,
"mode":"auto",
"boost":"inactive",
"dst":"set",
"window":"closed",
"state":"unlocked",
"battery":"GOOD",
"windowtemp": 12.0,
"windowdur": 15,
"day": 21.0,
"night": 17.0,
"offset": 0.0
}
holiday:
as above, but adds ,"holidayend":"YY-MM-DD HH:MM"
when trv <mac> reqprofile is used, adds:
"profiledayN":"20.5-07:30,17.0-17:00,22.5-22:00,17.0-24:00"
where N is the day (0-6) (0 = saturday?).
when trv <mac> setprofile is used, adds:
"profiledayset":N
where N is the day (0-6) (0 = saturday?).
on error:
"result":"fail",
The driver will try a command three times before reporting
4 digit pin calculation: (just for info)
serialno = "REQ0123456"
pin = []
x = str((ord(serialno[3]) ^ ord(serialno[7])) % 10)
pin.append(x)
x = str((ord(serialno[4]) ^ ord(serialno[8])) % 10)
pin.append(x)
x = str((ord(serialno[5]) ^ ord(serialno[9])) % 10)
pin.append(x)
x = str((ord(serialno[0]) - ord('A') ^ ord(serialno[6]) - ord('0')) % 10)
pin.append(x)
print("".join(pin))
*/
//#define VSCODE_DEV
#ifdef VSCODE_DEV
#define ESP32
#define USE_BLE_ESP32
#define USE_EQ3_ESP32
#endif
// for testing of BLE_ESP32, we remove xsns_62_MI_ESP32.ino completely, and instead add this modified xsns_52_ibeacon_BLE_ESP32.ino
#if CONFIG_IDF_TARGET_ESP32
#ifdef USE_EQ3_ESP32
#ifdef ESP32 // ESP32 only. Use define USE_HM10 for ESP8266 support
#ifdef USE_BLE_ESP32
#define XDRV_85 85
#define D_CMND_EQ3 "trv"
// uncomment for more debug messages
//#define EQ3_DEBUG
namespace EQ3_ESP32 {
void CmndTrv(void);
void CmndTrvPeriod(void);
void CmndTrvOnlyAliased(void);
void CmndTrvMatchPrefix(void);
void CmndTrvMinRSSI(void);
void CmndTrvHideFailedPoll(void);
const char kEQ3_Commands[] PROGMEM = D_CMND_EQ3"|"
"|"
"period|"
"onlyaliased|"
"MatchPrefix|"
"MinRSSI|"
"HideFailedPoll";
void (*const EQ3_Commands[])(void) PROGMEM = {
&CmndTrv,
&CmndTrvPeriod,
&CmndTrvOnlyAliased,
&CmndTrvMatchPrefix,
&CmndTrvMinRSSI,
&CmndTrvHideFailedPoll
};
const char *cmdnames[] = {
"poll",
"raw",
"state",
"settime",
"settemp",
"offset",
"setdaynight",
"setwindowtempdur",
"setholiday",
"boost",
"unboost",
"unlock",
"auto",
"manual",
"eco",
"on",
"off",
"valve",
"mode",
"day",
"night",
"reqprofile",
"setprofile",
"lock",
};
const uint8_t *macprefixes[1] = {
(uint8_t *)"\x00\x1a\x22"
};
int EQ3GenericOpCompleteFn(BLE_ESP32::generic_sensor_t *pStruct);
const char EQ3_Svc[] PROGMEM = "3e135142-654f-9090-134a-a6ff5bb77046";
const char EQ3_rw_Char[] PROGMEM = "3fa4585a-ce4a-3bad-db4b-b8df8179ea09";
const char EQ3_notify_Char[] PROGMEM = "d0e8434d-cd29-0996-af41-6c90f4e0eb2a";
struct eq3_device_tag{
uint8_t addr[7];
int8_t RSSI;
uint64_t timeoutTime;
uint8_t pairing;
uint8_t lastStatus[16]; // last received 02 stat
uint8_t lastStatusLen;
uint32_t lastStatusTime; // in utc
uint8_t nextDiscoveryData;
} eq3_device_t;
/*********************************************************************************************\
* variables to control operation
\*********************************************************************************************/
int retries = 0;
// allow 240s before timeout of sa device - based on that we restart BLE if we don't see adverts for 120s
#define EQ3_TIMEOUT 240L
uint8_t pairingaddr[7] = {0,0,0,0,0,0};
char pairingserial[20];
uint8_t pairing = 0;
#define EQ3_NUM_DEVICESLOTS 16
eq3_device_tag EQ3Devices[EQ3_NUM_DEVICESLOTS];
SemaphoreHandle_t EQ3mutex = nullptr;
int EQ3Period = 300;
uint8_t EQ3OnlyAliased = 0;
uint8_t EQ3MatchPrefix = 1;
uint8_t opInProgress = 0;
int seconds = 20;
int EQ3CurrentSingleSlot = 0;
uint8_t EQ3TopicStyle = 1;
uint8_t EQ3HideFailedPoll = 1;
int8_t trvMinRSSI = -99;
// control of timing of sending polling.
// we leave an interval between polls to allow scans to take place
int intervalSeconds = 10; // min seconds between operations
int intervalSecondsCounter = 0; // set when an operation is over to intervalSeconds
int nextEQ3Poll = EQ3_NUM_DEVICESLOTS; // set to zero to start a poll cycle
#pragma pack( push, 1 ) // aligned structures for size
struct op_t {
uint8_t addr[7];
uint8_t towrite[16];
uint8_t writelen;
uint8_t cmdtype;
};
#pragma pack(pop)
std::deque<EQ3_ESP32::op_t*> opQueue;
/*********************************************************************************************\
* Functions
\*********************************************************************************************/
const char *addrStr(const uint8_t *addr, int useAlias = 0){
static char addrstr[32];
const char *id = nullptr;
if (useAlias){
id = BLE_ESP32::getAlias(addr);
}
if (!id || !(*id)){
id = addrstr;
BLE_ESP32::dump(addrstr, 13, addr, 6);
} else {
}
return id;
}
char *topicPrefix(int prefix, const uint8_t *addr, int useAlias){
static char stopic[TOPSZ];
const char *id = addrStr(addr, useAlias);
if (!EQ3TopicStyle){
GetTopic_P(stopic, prefix, TasmotaGlobal.mqtt_topic, PSTR(""));
strcat(stopic, PSTR("EQ3/"));
strcat(stopic, id);
} else {
char p[] = "EQ3";
GetTopic_P(stopic, prefix, p, id);
}
return stopic;
}
// return 0+ if we find the addr has one of our listed prefixes
// return -1 if we don't recognise the mac
int matchPrefix(const uint8_t *addr){
for (int i = 0; i < sizeof(macprefixes)/sizeof(*macprefixes); i++){
if (!memcmp(addr, macprefixes[i], 3)){
return i;
}
}
return -1;
}
bool EQ3Operation(const uint8_t *MAC, const uint8_t *data, int datalen, int cmdtype, int retries_in = 0) {
BLE_ESP32::generic_sensor_t *op = nullptr;
// ALWAYS use this function to create a new one.
int res = BLE_ESP32::newOperation(&op);
if (!res){
AddLog(LOG_LEVEL_ERROR,PSTR("EQ3 %s:Can't get a newOperation from BLE"), addrStr(MAC, cmdtype & 0x80));
retries = 0;
return 0;
} else {
#ifdef EQ3_DEBUG
AddLog(LOG_LEVEL_DEBUG,PSTR("EQ3 %s:got a newOperation from BLE"), addrStr(MAC, cmdtype & 0x80));
#endif
}
NimBLEAddress addr((uint8_t *)MAC);
op->addr = addr;
bool havechar = false;
op->serviceUUID = NimBLEUUID(EQ3_Svc);
op->characteristicUUID = NimBLEUUID(EQ3_rw_Char);
op->notificationCharacteristicUUID = NimBLEUUID(EQ3_notify_Char);
if (data && datalen) {
op->writelen = datalen;
memcpy(op->dataToWrite, data, datalen);
} else {
op->writelen = 1;
op->dataToWrite[0] = 0x03; // just request status
}
// this op will call us back on complete or failure.
op->completecallback = (void *)EQ3GenericOpCompleteFn;
// store this away for later
op->context = (void *)cmdtype;
res = BLE_ESP32::extQueueOperation(&op);
if (!res){
// if it fails to add to the queue, do please delete it
BLE_ESP32::freeOperation(&op);
AddLog(LOG_LEVEL_ERROR,PSTR("EQ3 %s:Failed to queue new operation - deleted"), addrStr(MAC, cmdtype & 0x80));
retries = 0;
} else {
if (retries_in){
retries = retries_in;
}
}
return res;
}
int EQ3DoOp(){
if (!opInProgress){
if (opQueue.size()){
op_t* op = opQueue[0];
if (EQ3Operation(op->addr, op->towrite, op->writelen, op->cmdtype, 4)){
opQueue.pop_front();
opInProgress = 1;
AddLog(LOG_LEVEL_DEBUG, PSTR("EQ3 %s:Op dequeued len now %d"), addrStr(op->addr, (op->cmdtype & 0x80)), opQueue.size());
delete op;
return 1;
} else {
AddLog(LOG_LEVEL_ERROR, PSTR("EQ3 %s:Op BLE could not start op queue len %d"), addrStr(op->addr, (op->cmdtype & 0x80)), opQueue.size());
}
}
}
return 0;
}
int EQ3QueueOp(const uint8_t *MAC, const uint8_t *data, int datalen, int cmdtype, int useAlias) {
op_t* newop = new op_t;
memcpy(newop->addr, MAC, 6);
memcpy(newop->towrite, data, datalen);
newop->writelen = datalen;
newop->cmdtype = cmdtype | (useAlias?0x80:0);
opQueue.push_back(newop);
int qlen = opQueue.size();
AddLog(LOG_LEVEL_DEBUG, PSTR("EQ3 %s: Op queued len now %d"), addrStr(newop->addr, (newop->cmdtype & 0x80)), qlen);
EQ3DoOp();
return qlen;
}
int EQ3ParseOp(BLE_ESP32::generic_sensor_t *op, bool success, int retries){
int res = 0;
opInProgress = 0;
ResponseClear();
uint8_t addrev[7];
const uint8_t *native = op->addr.getNative();
memcpy(addrev, native, 6);
BLE_ESP32::ReverseMAC(addrev);
eq3_device_tag *eq3 = nullptr;
int free = -1;
for (int i = 0; i < EQ3_NUM_DEVICESLOTS; i++){
if (!memcmp(EQ3Devices[i].addr, addrev, 6)){
eq3 = &EQ3Devices[i];
break;
}
}
int cmdtype = (((uint32_t)op->context) & 0xff);
const char *cmdType = PSTR("invalid");
int useAlias = cmdtype & 0x80;
cmdtype &= 0x7f;
if ((cmdtype >= 0) && (cmdtype < sizeof(cmdnames)/sizeof(*cmdnames))){
cmdType = cmdnames[cmdtype];
}
ResponseAppend_P(PSTR("{"));
ResponseAppend_P(PSTR("\"cmd\":\"%s\""), cmdType);
ResponseAppend_P(PSTR(",\"result\":\"%s\""), success? "ok":"fail");
ResponseAppend_P(PSTR(",\"MAC\":\"%s\""), addrStr(addrev));
const char *host = NetworkHostname();
ResponseAppend_P(PSTR(",\"tas\":\"%s\""), host);
if (cmdtype == 1){
char raw[40];
BLE_ESP32::dump(raw, 40, op->dataNotify, op->notifylen);
ResponseAppend_P(PSTR(",\"raw\":\"%s\""), raw);
}
uint8_t *status = {0};
uint8_t statlen = 0;
uint32_t stattime = 0;
if (success){
if ((op->notifylen >= 6) && (op->dataNotify[0] == 2) && (op->dataNotify[1] == 1)){
if (eq3){
memcpy(eq3->lastStatus, op->dataNotify, (op->notifylen <= 10)?op->notifylen:16);
eq3->lastStatusLen = (op->notifylen <= 10)?op->notifylen:16;
eq3->lastStatusTime = UtcTime();
}
}
status = op->dataNotify;
statlen = op->notifylen;
stattime = UtcTime();
}
if (eq3){
status = eq3->lastStatus;
statlen = eq3->lastStatusLen;
stattime = eq3->lastStatusTime;
ResponseAppend_P(PSTR(",\"RSSI\":%d"), eq3->RSSI);
}
if ((statlen >= 6) && (status[0] == 2) && (status[1] == 1)){
ResponseAppend_P(PSTR(",\"stattime\":%u"), stattime);
ResponseAppend_P(PSTR(",\"temp\":%2.1f"), ((float)status[5])/2);
ResponseAppend_P(PSTR(",\"posn\":%d"), status[3]);
int stat = status[2];
ResponseAppend_P(PSTR(",\"mode\":"));
switch (stat & 3){
case 0:
ResponseAppend_P(PSTR("\"auto\""));
break;
case 1:
ResponseAppend_P(PSTR("\"manual\""));
break;
case 2:
ResponseAppend_P(PSTR("\"holiday\""));
break;
case 3:
ResponseAppend_P(PSTR("\"manualholiday\""));
break;
}
ResponseAppend_P(PSTR(",\"hassmode\":"));
do {
//0201283B042A
// its in auto
if ((stat & 3) == 0) { ResponseAppend_P(PSTR("\"auto\"")); break; }
// it's set to 'OFF'
if (((stat & 3) == 1) && (status[5] == 9)) { ResponseAppend_P(PSTR("\"off\"")); break; }
// it's actively heating (valve open)
if (((stat & 3) == 1) && (status[5] > 9) && (status[3] > 0)) { ResponseAppend_P(PSTR("\"heat\"")); break; }
// it's achieved temp (valve closed)
if (((stat & 3) == 1) && (status[5] > 9)) { ResponseAppend_P(PSTR("\"idle\"")); break; }
ResponseAppend_P(PSTR("\"idle\""));
break;
} while (0);
ResponseAppend_P(PSTR(",\"boost\":\"%s\""), (stat & 4)?"active":"inactive");
ResponseAppend_P(PSTR(",\"dst\":\"%s\""), (stat & 8)?"set":"unset");
ResponseAppend_P(PSTR(",\"window\":\"%s\""), (stat & 16)?"open":"closed");
ResponseAppend_P(PSTR(",\"state\":\"%s\""), (stat & 32)?"locked":"unlocked");
ResponseAppend_P(PSTR(",\"battery\":\"%s\""), (stat & 128)?"LOW":"GOOD");
}
if ((statlen >= 10) && (status[0] == 2) && (status[1] == 1)){
int mm = status[8] * 30;
int hh = mm/60;
mm = mm % 60;
ResponseAppend_P(PSTR(",\"holidayend\":\"%02d-%02d-%02d %02d:%02d\""),
status[7],
status[9],
status[6],
hh, mm
);
if (statlen >= 15) {
ResponseAppend_P(PSTR(",\"windowtemp\":%2.1f"), ((float)status[10])/2);
ResponseAppend_P(PSTR(",\"windowdur\":%d"), ((int)status[11])*5);
ResponseAppend_P(PSTR(",\"day\":%2.1f"), ((float)status[12])/2);
ResponseAppend_P(PSTR(",\"night\":%2.1f"), ((float)status[13])/2);
ResponseAppend_P(PSTR(",\"offset\":%2.1f"), ((float)status[14]-7) /2);
}
}
if (success) {
// now to parse other data - this may not have been a stat message
if ((op->notifylen >= 3) && (op->dataNotify[0] == 2) && (op->dataNotify[1] == 2)){
ResponseAppend_P(PSTR(",\"profiledayset\":%d"), op->dataNotify[2]);
}
if ((op->notifylen >= 16) && (op->dataNotify[0] == 0x21)){
//YY is the time, coded as (minutes/10), up to which to maintain the temperature declared in XX
//XX represents the temperature to be maintained until then, codified as (temperature*2)
// byte 0: 21 (default value)
// byte 1: 02 (Monday = 0x02)
// byte (2,3): 22 24 (17°C up to 06:00)
// byte (4,5): 2A 36 (21°C up to 09:00)
// byte (6,7): 22 66 (17°C up to 17:00)
// byte (8,9): 2A 8A (21°C up to 23:00)
// byte (10,11): 22 90 (17°C up to 24:00)
// byte (12,13): 22 90 (unused)
// byte (14,15): 22 90 (unused)
ResponseAppend_P(PSTR(",\"profileday%d\":\""), op->dataNotify[1]);
uint8_t *data = op->dataNotify + 2;
for (int i = 0; i < 7; i++){
float t = *(data++);
t /= 2;
int mm = *(data++);
mm *= 10;
int hh = mm / 60;
mm = mm % 60;
ResponseAppend_P(PSTR("%2.1f-%02d:%02d"), t, hh, mm);
// stop if the last one is 24.
if (hh == 24){
break;
}
if (i < 6){
ResponseAppend_P(PSTR(","));
}
}
ResponseAppend_P(PSTR("\""));
}
res = 1;
}
ResponseAppend_P(PSTR("}"));
int type = STAT;
if (cmdtype){
type = STAT;
} else {
// it IS a poll command
if (EQ3HideFailedPoll){
if (!success){
AddLog(LOG_LEVEL_DEBUG, PSTR("EQ3 %s poll fail not sent because EQ3HideFailedPoll"), addrStr(addrev));
return res;
}
}
}
char *topic = topicPrefix(type, addrev, useAlias);
MqttPublish(topic, false);
return res;
}
int EQ3GenericOpCompleteFn(BLE_ESP32::generic_sensor_t *op){
uint32_t context = (uint32_t) op->context;
opInProgress = 0;
if (op->state <= GEN_STATE_FAILED){
uint8_t addrev[7];
const uint8_t *native = op->addr.getNative();
memcpy(addrev, native, 6);
BLE_ESP32::ReverseMAC(addrev);
if (retries > 1){
retries--;
if (EQ3Operation(addrev, op->dataToWrite, op->writelen, (int)op->context)){
//EQ3ParseOp(op, false, retries);
AddLog(LOG_LEVEL_ERROR,PSTR("EQ3 %s: trv operation failed - retrying %d"), addrStr(addrev), op->state);
opInProgress = 1;
} else {
retries = 0;
EQ3ParseOp(op, false, 0);
AddLog(LOG_LEVEL_ERROR,PSTR("EQ3 %s: trv operation failed to send op %d"), addrStr(addrev), op->state);
}
} else {
retries = 0;
EQ3ParseOp(op, false, 0);
AddLog(LOG_LEVEL_ERROR,PSTR("EQ3 %s: trv operation failed - no more retries %d"), addrStr(addrev), op->state);
}
return 0;
}
retries = 0;
EQ3ParseOp(op, true, 0);
return 0;
}
/*********************************************************************************************\
* Functons actualy called from within the BLE task
\*********************************************************************************************/
int ispairing2(const uint8_t *payload, int len, char *name, int namelen, char *serial, int seriallen ){
while (len){
int l = *payload;
//BLE_ESP32::dump(temp, 40, payload, l+1);
//AddLog(LOG_LEVEL_ERROR,PSTR("EQ3: %s"), temp);
payload++;
len--;
if (len < l){
//AddLog(LOG_LEVEL_ERROR,PSTR("EQ3: part len er %d<%d"),len, l);
return 0;
}
switch (*payload){
case 0xff: {// parse the EQ3 advert payload looking for nnFF01ssssssss
payload++;
len--;
l--;
if (*payload == 1){
payload++;
len--;
l--;
//char serialstr[20];
//strncpy(serialstr, (const char *)payload, l);
//AddLog(LOG_LEVEL_DEBUG,PSTR("EQ3: adv part FF01 detected %s"), serialstr);
// we don;t use these, but that's what they seem to be....
uint8_t copylen = (l > seriallen)?seriallen:l;
strncpy(serial, (const char *)payload, copylen);
serial[seriallen-1] = 0;
payload += l;
len -= l;
return 1;
} else {
payload += l;
len -= l;
}
} break;
case 0x09: {
payload++;
len--;
l--;
if (*payload == 1){
payload++;
len--;
l--;
//char serialstr[20];
//strncpy(serialstr, (const char *)payload, l);
//AddLog(LOG_LEVEL_DEBUG,PSTR("EQ3: adv part FF01 detected %s"), serialstr);
// we don;t use these, but that's what they seem to be....
uint8_t copylen = (l > namelen)?namelen:l;
strncpy(name, (const char *)payload, copylen);
name[namelen-1] = 0;
payload += l;
len -= l;
//return 1;
} else {
payload += l;
len -= l;
}
} break;
default:{
payload += l;
len -= l;
} break;
}
}
return 0;
}
int ispairing(const uint8_t *payload, int len){
//char temp[40];
//BLE_ESP32::dump(temp, 40, payload, len);
//AddLog(LOG_LEVEL_DEBUG,PSTR("EQ3: pair%d %s"), len, temp);
while (len){
int l = *payload;
//BLE_ESP32::dump(temp, 40, payload, l+1);
//AddLog(LOG_LEVEL_ERROR,PSTR("EQ3: %s"), temp);
payload++;
len--;
if (len < l){
//AddLog(LOG_LEVEL_ERROR,PSTR("EQ3: part len er %d<%d"),len, l);
return 0;
}
if (*payload == 0xff){
payload++;
len--;
l--;
if (*payload == 1){
payload++;
len--;
l--;
//char serialstr[20];
//strncpy(serialstr, (const char *)payload, l);
//AddLog(LOG_LEVEL_DEBUG,PSTR("EQ3: adv part FF01 detected %s"), serialstr);
// we don;t use these, but that's what they seem to be....
const uint8_t *serial = payload;
uint8_t seriallen = l;
payload += l;
len -= l;
return 1;
} else {
payload += l;
len -= l;
}
} else {
payload += l;
len -= l;
}
}
return 0;
}
int TaskEQ3AddDevice(int8_t RSSI, const uint8_t* addr, char *serial){
int free = -1;
int i = 0;
uint64_t now = esp_timer_get_time();
if (serial && serial[0] && !pairing){
memcpy(pairingaddr, addr, 6);
strncpy(pairingserial, serial, sizeof(pairingserial));
pairingserial[sizeof(pairingserial)-1] = 0;
pairing = 1;
}
for(i = 0; i < EQ3_NUM_DEVICESLOTS; i++){
if(memcmp(addr,EQ3Devices[i].addr,6)==0){
break;
}
if (EQ3Devices[i].timeoutTime && (EQ3Devices[i].timeoutTime < now)) {
#ifdef EQ3_DEBUG
AddLog(LOG_LEVEL_DEBUG,PSTR("EQ3 %s timeout at %d"), addrStr(EQ3Devices[i].addr), i);
#endif
EQ3Devices[i].timeoutTime = 0L;
}
if (!EQ3Devices[i].timeoutTime){
if (free == -1){
free = i;
}
}
}
if (i == EQ3_NUM_DEVICESLOTS){
if (free >= 0){
i = free;
} else {
AddLog(LOG_LEVEL_ERROR,PSTR("EQ3 lost %s: > %d devices"), addrStr(addr), EQ3_NUM_DEVICESLOTS);
return 0;
}
}
#ifdef EQ3_DEBUG
if (!EQ3Devices[i].timeoutTime)
AddLog(LOG_LEVEL_INFO,PSTR("EQ3 %s: added at %d"), addrStr(addr), i);
#endif
EQ3Devices[i].timeoutTime = now + (1000L*1000L)*EQ3_TIMEOUT;
memcpy(EQ3Devices[i].addr, addr, 6);
EQ3Devices[i].RSSI = RSSI;
EQ3Devices[i].pairing = (serial && serial[0])?1:0;
return 1;
}
const char *EQ3Names[] = {
"CC-RT-BLE",
"CC-RT-BLE-EQ",
"CC-RT-M-BLE"
};
int TaskEQ3advertismentCallback(BLE_ESP32::ble_advertisment_t *pStruct)
{
// we will try not to use this...
BLEAdvertisedDevice *advertisedDevice = pStruct->advertisedDevice;
std::string sname = advertisedDevice->getName();
bool found = false;
const char *nameStr = sname.c_str();
int8_t RSSI = pStruct->RSSI;
const uint8_t *addr = pStruct->addr;
const char *alias = BLE_ESP32::getAlias(addr);
if (EQ3OnlyAliased){
// ignore unless we have an alias.
if (!alias || !(*alias)){
return 0;
}
}
if (!alias) alias = "";
for (int i = 0; i < sizeof(EQ3Names)/sizeof(*EQ3Names); i++){
if (!strcmp(nameStr, EQ3Names[i])){
found = true;
break;
}
}
if (!found && !strncmp(alias, "EQ3", 3)){
found = true;
}
// if the addr matches the EQ2 mfg prefix, add it?
if (!found && EQ3MatchPrefix && (matchPrefix(addr) >= 0)){
found = true;
}
if (!found) return 0;
#ifdef EQ3_DEBUG
if (BLE_ESP32::BLEDebugMode > 0) AddLog(LOG_LEVEL_DEBUG,PSTR("EQ3Device: saw %s"),advertisedDevice->getAddress().toString().c_str());
#endif
uint8_t* payload = advertisedDevice->getPayload();
size_t payloadlen = advertisedDevice->getPayloadLength();
char name[20] = {0};
char serial[20] = {0};
int pairing = 0;
ispairing2(payload, payloadlen, name, 20, serial, 20);
// this will take and keep the mutex until the function is over
TasAutoMutex localmutex(&EQ3mutex);
TaskEQ3AddDevice(RSSI, addr, serial);
return 0;
}
/*********************************************************************************************\
* Helper functions
\*********************************************************************************************/
/*********************************************************************************************\
* init
\*********************************************************************************************/
void EQ3Init(void) {
memset(&EQ3Devices, 0, sizeof(EQ3Devices));
BLE_ESP32::registerForAdvertismentCallbacks((const char *)"EQ3", TaskEQ3advertismentCallback);
#ifdef EQ3_DEBUG
AddLog(LOG_LEVEL_INFO,PSTR("EQ3: init: request callbacks"));
#endif
EQ3Period = Settings->tele_period;
return;
}
/***********************************************************************\
* Regular
\***********************************************************************/
void EQ3Every50mSecond(){
}
/**
* @brief Main loop of the driver, "high level"-loop
*
*/
int EQ3Send(const uint8_t* addr, const char *cmd, char* param, char* param2, int useAlias);
void EQ3EverySecond(bool restart){
if (pairing){
char p[40]; // used in dump
BLE_ESP32::dump(p, 20, pairingaddr, 6);
Response_P(PSTR("{\"pairing\":\"%s\",\"serial\":\"%s\"}"), p, pairingserial);
char addrstr[4+8*2+2] = "EQ3/";
BLE_ESP32::dump(&addrstr[4], 8*2+2, pairingaddr, 6);
char *topic = topicPrefix(STAT, pairingaddr, 1);
MqttPublish(topic, false);
pairing = 0;
}
seconds --;
if (seconds <= 0){
if (EQ3Period){
if (nextEQ3Poll >= EQ3_NUM_DEVICESLOTS){
AddLog(LOG_LEVEL_DEBUG, PSTR("EQ3 poll cycle starting"));
nextEQ3Poll = 0;
} else {
AddLog(LOG_LEVEL_ERROR, PSTR("EQ3 poll overrun, deferred - last loop only got to %d, not %d"), nextEQ3Poll, EQ3_NUM_DEVICESLOTS);
}
}
seconds = EQ3Period;
}
if (EQ3Period){
int qlen = opQueue.size();
if ((nextEQ3Poll < EQ3_NUM_DEVICESLOTS) && (qlen == 0) && (!opInProgress)){
if (intervalSecondsCounter){
intervalSecondsCounter--;
} else {
// queue a EQ3Status op against each known EQ3.
// mark it as a regular stat rather than a use cmd.
for(int i = nextEQ3Poll; i < EQ3_NUM_DEVICESLOTS; i++){
if (!EQ3Devices[i].timeoutTime){
nextEQ3Poll = i+1;
continue;
}
// trvMinRSSI
// find the device in BLE to get RSSI
if (EQ3Devices[i].RSSI < trvMinRSSI){
AddLog(LOG_LEVEL_DEBUG, PSTR("EQ3 %s RSSI %d < min %d, poll suppressed"), addrStr(EQ3Devices[i].addr), EQ3Devices[i].RSSI, trvMinRSSI);
nextEQ3Poll = i+1;
continue;
}
EQ3Send(EQ3Devices[i].addr, PSTR("poll"), nullptr, nullptr, 1);
nextEQ3Poll = i+1;
intervalSecondsCounter = intervalSeconds;
break;
}
}
}
}
// start next op now, if we have any queued
EQ3DoOp();
}
/*********************************************************************************************\
* Presentation
\*********************************************************************************************/
int EQ3SendCurrentDevices(){
// send the active devices
ResponseClear();
ResponseAppend_P(PSTR("{\"devices\":{"));
int added = 0;
for(int i = 0; i < EQ3_NUM_DEVICESLOTS; i++){
char p[40];
if (!EQ3Devices[i].timeoutTime)
continue;
if (added){
ResponseAppend_P(PSTR(","));
}
BLE_ESP32::dump(p, 20, EQ3Devices[i].addr, 6);
ResponseAppend_P(PSTR("\"%s\":%d"), p, EQ3Devices[i].RSSI);
added = 1;
}
ResponseAppend_P(PSTR("}}"));
MqttPublishPrefixTopic_P(STAT, PSTR("EQ3"), false);
return 0;
}
int EQ3SendResult(char *requested, const char *result){
// send the result
Response_P(PSTR("{\"result\":\"%s\"}"), result);
static char stopic[TOPSZ];
GetTopic_P(stopic, STAT, TasmotaGlobal.mqtt_topic, PSTR(""));
strcat(stopic, PSTR("EQ3/"));
strcat(stopic, requested);
MqttPublish(stopic, false);
return 0;
}
/*********************************************************************************************\
* Commands
\*********************************************************************************************/
void simpletolower(char *p){
if (!p) return;
while (*p){
*p = *p | 0x20;
p++;
}
}
//
// great description here:
// https://reverse-engineering-ble-devices.readthedocs.io/en/latest/protocol_description/00_protocol_description.html
// not all implemented yet.
//
int EQ3Send(const uint8_t* addr, const char *cmd, char* param, char* param2, int useAlias){
char p[] = "";
if (!param) param = p;
if (!param2) param2 = p;
uint8_t d[20];
memset(d, 0, sizeof(d));
int dlen = 0;
#ifdef EQ3_DEBUG
AddLog(LOG_LEVEL_INFO,PSTR("EQ3 %s: cmd: [%s] [%s] [%s]"), addrStr(addr), cmd, param, param2);
#endif
/* done on whole string before here.
simpletolower(cmd);
simpletolower(param);
simpletolower(param2);
*/
int cmdtype = 0;
do {
if (!strcmp(cmd, "raw")){
cmdtype = 1;
if (!param || param[0] == 0){
return -1;
}
int len = strlen(param) / 2;
if (len > 20){
AddLog(LOG_LEVEL_ERROR,PSTR("EQ3 raw len of %s = %d > 20"), param, len);
return -1;
}
BLE_ESP32::fromHex(d, param, len);
dlen = len;
break;
}
/* if (!strcmp(cmd, "state")){
d[0] = 0x03;
dlen = 1;
break;
}
*/
if (!strcmp(cmd, "settime") || !strcmp(cmd, "state") || !strcmp(cmd, "poll")){
if (!strcmp(cmd, "poll")){
cmdtype = 0;
}
if (!strcmp(cmd, "state")){
cmdtype = 2;
}
if (!strcmp(cmd, "settime")){
cmdtype = 3;
}
if (!param || param[0] == 0){
if (RtcTime.valid) {
d[0] = 0x03;
d[1] = (RtcTime.year % 100);
d[2] = RtcTime.month;
d[3] = RtcTime.day_of_month;
d[4] = RtcTime.hour;
d[5] = RtcTime.minute;
d[6] = RtcTime.second;
} else {
return -1;
}
// time_t now = 0;
// struct tm timeinfo = { 0 };
// time(&now);
// localtime_r(&now, &timeinfo);
// d[0] = 0x03;
// d[1] = timeinfo.tm_year % 100;
// d[2] = timeinfo.tm_mon + 1;
// d[3] = timeinfo.tm_mday;
// d[4] = timeinfo.tm_hour;
// d[5] = timeinfo.tm_min;
// d[6] = timeinfo.tm_sec;
} else {
d[0] = 0x03;
BLE_ESP32::fromHex(d+1, param, 6);
}
dlen = 7;
break;
}
if (!strcmp(cmd, "settemp")){
cmdtype = 4;
if (!param || param[0] == 0){
return -1;
}
float ftemp = 20;
sscanf(param, "%f", &ftemp);
if (ftemp < 4.5) ftemp = 4.5;
if (ftemp > 30) ftemp = 30;
ftemp *= 2;
uint8_t ctemp = (uint8_t) ftemp;
d[0] = 0x41; d[1] = ctemp; dlen = 2;
break;
}
if (!strcmp(cmd, "offset")){
cmdtype = 5;
if (!param || param[0] == 0){
return 0;
}
float ftemp = 20;
sscanf(param, "%f", &ftemp);
ftemp *= 2;
int8_t ctemp = (int8_t) ftemp;
ctemp += 7;
d[0] = 0x13; d[1] = ctemp; dlen = 2;
break;
}
if (!strcmp(cmd, "setdaynight")){
cmdtype = 6;
if (!param || param[0] == 0){
return -1;
}
if (!param2 || param2[0] == 0){
return -1;
}
float ftemp = 15;
sscanf(param, "%f", &ftemp);
if (ftemp < 5) ftemp = 5;
ftemp *= 2;
uint8_t dtemp = (uint8_t) ftemp;
ftemp = 20;
sscanf(param2, "%f", &ftemp);
if (ftemp < 5) ftemp = 5;
ftemp *= 2;
uint8_t ntemp = (uint8_t) ftemp;
d[0] = 0x11; d[1] = dtemp; d[2] = ntemp; dlen = 3;
break;
}
if (!strcmp(cmd, "setwindowtempdur")){
cmdtype = 7;
if (!param || param[0] == 0){
return -1;
}
if (!param2 || param2[0] == 0){
return -1;
}
float ftemp = 15;
sscanf(param, "%f", &ftemp);
if (ftemp < 5) ftemp = 5;
ftemp *= 2;
uint8_t temp = (uint8_t) ftemp;
int dur = 0;
sscanf(param2, "%d", &dur);
d[0] = 0x14; d[1] = temp; d[2] = (dur/5); dlen = 3;
break;
}
if (!strcmp(cmd, "setholiday")){
cmdtype = 8;
//40941C152402
// 40 94
if (!param || param[0] == 0){
return -1;
}
if (!param2 || param2[0] == 0){
return -1;
}
int yy = 0;
int mm = 0;
int dd = 0;
int hour = 0;
int min = 0;
char *p = param;
p = strtok(p, "-");
if (!p || p[0] == 0) return -1;
sscanf(p, "%d", &yy);
p = strtok(nullptr, "-");
if (!p || p[0] == 0) return -1;
sscanf(p, "%d", &mm);
p = strtok(nullptr, ",");
if (!p || p[0] == 0) return -1;
sscanf(p, "%d", &dd);
p = strtok(nullptr, ":");
if (!p || p[0] == 0) return -1;
sscanf(p, "%d", &hour);
p = strtok(nullptr, "");
if (!p || p[0] == 0) return -1;
sscanf(p, "%d", &min);
min += hour*60;
int tt = min / 30;
float ftemp = 15;
sscanf(param2, "%f", &ftemp);
if (ftemp < 5) ftemp = 5;
ftemp *= 2;
uint8_t temp = (uint8_t) ftemp + 128;
d[0] = 0x40;
d[1] = temp;
d[2] = dd;
d[3] = yy;
d[4] = tt;
d[5] = mm;
dlen = 6;
break;
}
if (!strcmp(cmd, "boost")) {
cmdtype = 9;
d[0] = 0x45; d[1] = 0x01;
if (param && (!strcmp(param, "off") || param[0] == '0')){
d[1] = 0x00;
}
dlen = 2; break;
}
if (!strcmp(cmd, "unboost")) {
cmdtype = 10;
d[0] = 0x45; d[1] = 0x00; dlen = 2; break; }
if (!strcmp(cmd, "lock")) { cmdtype = 23; d[0] = 0x80; d[1] = 0x01;
if (param && (!strcmp(param, "off") || param[0] == '0')){
d[1] = 0x00;
}
dlen = 2; break;
}
if (!strcmp(cmd, "unlock")) { cmdtype = 11; d[0] = 0x80; d[1] = 0x00; dlen = 2; break; }
if (!strcmp(cmd, "auto")) { cmdtype = 12; d[0] = 0x40; d[1] = 0x00; dlen = 2; break; }
if (!strcmp(cmd, "manual")) { cmdtype = 13; d[0] = 0x40; d[1] = 0x40; dlen = 2; break; }
// this is basically 'cancel holiday' - mode auto does that.
//if (!strcmp(cmd, "eco")) { cmdtype = 14; d[0] = 0x40; d[1] = 0x80; dlen = 2; break; }
if (!strcmp(cmd, "on")) {
int res = EQ3Send(addr, "manual", nullptr, nullptr, useAlias);
char tmp[] = "30";
int res2 = EQ3Send(addr, "settemp", tmp, nullptr, useAlias);
return res2;
}
if (!strcmp(cmd, "off")) {
int res = EQ3Send(addr, "manual", nullptr, nullptr, useAlias);
char tmp[] = "4.5";
int res2 = EQ3Send(addr, "settemp", tmp, nullptr, useAlias);
return res2;
}
if (!strcmp(cmd, "valve")) { cmdtype = 17; d[0] = 0x41; d[1] = 0x3c;
if (!param || param[0] == 0){
return -1;
}
if ((!strcmp(param, "off") || param[0] == '0')){
d[1] = 0x09;
}
dlen = 2; break;
}
if (!strcmp(cmd, "mode")) { cmdtype = 18; d[0] = 0x40; d[1] = 0xff;// invlaid
if (!param || param[0] == 0){
return -1;
}
if (!strcmp(param, "auto")){
d[1] = 0x00;
}
if (!strcmp(param, "manual")){
d[1] = 0x40;
}
if (!strcmp(param, "on") || !strcmp(param, "heat")) {
int res = EQ3Send(addr, "manual", nullptr, nullptr, useAlias);
char tmp[] = "30";
int res2 = EQ3Send(addr, "settemp", tmp, nullptr, useAlias);
return res2;
}
if (!strcmp(param, "off") || !strcmp(param, "cool")) {
int res = EQ3Send(addr, "manual", nullptr, nullptr, useAlias);
char tmp[] = "4.5";
int res2 = EQ3Send(addr, "settemp", tmp, nullptr, useAlias);
return res2;
}
if (d[1] == 0xff){ // no valid mode selection found
return -1;
}
// this is basically 'cancel holiday' - mode auto does that.
//if (!strcmp(param, "eco")){
// d[1] = 0x80;
//}
dlen = 2; break;
}
if (!strcmp(cmd, "day")) { cmdtype = 19; d[0] = 0x43; dlen = 1; break; }
if (!strcmp(cmd, "night")) { cmdtype = 20; d[0] = 0x44; dlen = 1; break; }
if (!strcmp(cmd, "reqprofile")) { cmdtype = 21;
if (!param || param[0] == 0){
return -1;
}
d[0] = 0x20; d[1] = atoi(param); dlen = 2;
break;
}
if (!strcmp(cmd, "setprofile")) { cmdtype = 22;
if (!param || param[0] == 0){
return -1;
}
if (!param2 || param2[0] == 0){
return -1;
}
d[0] = 0x10; d[1] = atoi(param);
// default
uint8_t temps[7] = {0x22,0x22,0x22,0x22,0x22,0x22,0x22};
uint8_t times[7] = {0x90,0x90,0x90,0x90,0x90,0x90,0x90};
// 20.5-17:30,
const char *p = strtok(param2, ",");
int i = 0;
while (p){
float t = 17;
int mm = 0;
int hh = 24;
sscanf(p, "%f-%d:%d", &t, &hh, &mm);
t *= 2;
temps[i] = (uint8_t) t;
int time = hh*60+mm;
time = time / 10;
times[i] = time;
p = strtok(nullptr, ",");
i++;
if (i >= 7) break;
}
// remaining left at 00 00
for (int j = 0; j < 7; j++){
d[2+j*2] = temps[j];
d[2+j*2+1] = times[j];
}
dlen = 2+14;
break;
}
break;
} while(0);
if (dlen){
dlen = 16;
return EQ3QueueOp(addr, d, dlen, cmdtype, useAlias);
//return EQ3Operation(addr, d, dlen, 4);
}
return -1;
}
const char *responses[] = {
PSTR("Done"),
PSTR("queued"),
PSTR("ignoredbusy"),
PSTR("invcmd"),
PSTR("cmdfail"),
PSTR("invidx"),
PSTR("invaddr")
};
int CmndTrvNext(int index, char *data){
AddLog(LOG_LEVEL_DEBUG,PSTR("EQ3 cmd index: %d"), index);
//simpletolower(data);
switch(index){
case 0:
case 1: {
char *p = strtok(data, " ");
bool trigger = false;
if (!strcmp(p, "reset")){
retries = 0;
for (int i = 0; i < EQ3_NUM_DEVICESLOTS; i++){
EQ3Devices[i].timeoutTime = 0L;
}
return 0;
}
if (!strcmp(p, "scan")){
#ifdef EQ3_DEBUG
AddLog(LOG_LEVEL_DEBUG,PSTR("EQ3 cmd: %s"), p);
#endif
EQ3SendCurrentDevices();
return 0;
}
if (!strcmp(p, "devlist")){
#ifdef EQ3_DEBUG
AddLog(LOG_LEVEL_DEBUG,PSTR("EQ3 cmd: %s"), p);
#endif
EQ3SendCurrentDevices();
return 0;
}
// only allow one command in progress
if (retries){
//return 2;
}
int useAlias = 0;
uint8_t addrbin[7];
int addrres = BLE_ESP32::getAddr(addrbin, p);
if (addrres){
if (addrres == 2){
AddLog(LOG_LEVEL_DEBUG,PSTR("EQ3 addr used alias: %s"), p);
useAlias = 1;
}
NimBLEAddress addr(addrbin, addrbin[6]);
#ifdef EQ3_DEBUG
//AddLog(LOG_LEVEL_INFO,PSTR("EQ3 cmd addr: %s -> %s"), p, addr.toString().c_str());
#endif
} else {
AddLog(LOG_LEVEL_ERROR,PSTR("EQ3 addr invalid: %s"), p);
return 3;
}
// get next part of cmd
char *cmd = strtok(nullptr, " ");
if (!cmd){
return 3;
}
char *param = strtok(nullptr, " ");
char *param2 = nullptr;
if (param){
param2 = strtok(nullptr, " ");
}
int res = EQ3Send(addrbin, cmd, param, param2, useAlias);
if (res > 0) {
// succeeded to queue
AddLog(LOG_LEVEL_ERROR,PSTR("EQ3 queued"));
return 1;
}
if (res < 0) { // invalid in some way
AddLog(LOG_LEVEL_ERROR,PSTR("EQ3 invalid"));
return 3;
}
AddLog(LOG_LEVEL_ERROR,PSTR("EQ3 failed to queue"));
// failed to queue
return 4;
} break;
case 2:
retries = 0;
return 0;
break;
}
return 4;
}
void CmndTrv(void) {
int res = CmndTrvNext(XdrvMailbox.index, XdrvMailbox.data);
ResponseCmndChar(responses[res]);
}
void CmndTrvPeriod(void) {
if (XdrvMailbox.data_len > 0) {
if (1 == XdrvMailbox.payload){
seconds = 0;
} else {
EQ3Period = XdrvMailbox.payload;
if (seconds > EQ3Period){
seconds = EQ3Period;
}
}
}
ResponseCmndNumber(EQ3Period);
}
void CmndTrvOnlyAliased(void){
if (XdrvMailbox.data_len > 0) {
EQ3OnlyAliased = XdrvMailbox.payload;
}
ResponseCmndNumber(EQ3OnlyAliased);
}
void CmndTrvMatchPrefix(void){
if (XdrvMailbox.data_len > 0) {
EQ3MatchPrefix = XdrvMailbox.payload;
}
ResponseCmndNumber(EQ3MatchPrefix);
}
void CmndTrvMinRSSI(void){
if (XdrvMailbox.data_len > 0) {
trvMinRSSI = atoi(XdrvMailbox.data);
}
// signed number
Response_P(PSTR("{\"%s\":%d}"), XdrvMailbox.command, trvMinRSSI);
}
void CmndTrvHideFailedPoll(void){
if (XdrvMailbox.data_len > 0) {
EQ3HideFailedPoll = XdrvMailbox.payload;
}
ResponseCmndNumber(EQ3HideFailedPoll);
}
#define EQ3_TOPIC "EQ3"
static char tmp[120];
bool mqtt_direct(){
char stopic[TOPSZ];
strncpy(stopic, XdrvMailbox.topic, TOPSZ);
XdrvMailbox.topic[TOPSZ-1] = 0;
AddLog(LOG_LEVEL_DEBUG,PSTR("EQ3 mqtt: %s:%s"), stopic, XdrvMailbox.data);
char *items[10];
char *p = stopic;
int cnt = 0;
do {
items[cnt] = strtok(p, "/");
cnt++;
p = nullptr;
} while (items[cnt-1]);
cnt--; // repreents the number of items
if (cnt < 4){ // not for us?
//AddLog(LOG_LEVEL_INFO,PSTR("cnt: %d < 4"), cnt);
return false;
}
for (int i = 0; i < cnt; i++){
//AddLog(LOG_LEVEL_INFO,PSTR("cnt %d:%s"), i, items[i]);
}
int EQ3index = 0;
int MACindex = 0;
int CMDindex = 0;
if (strcasecmp_P(items[cnt-3], PSTR(EQ3_TOPIC)) != 0) {
//AddLog(LOG_LEVEL_INFO,PSTR("cnt-3 not %s"), PSTR(EQ3_TOPIC));
if (strcasecmp_P(items[cnt-2], PSTR(EQ3_TOPIC)) != 0) {
//AddLog(LOG_LEVEL_INFO,PSTR("cnt-2 not %s"), PSTR(EQ3_TOPIC));
return false; // not for us
} else {
EQ3index = cnt-2;
MACindex = cnt-1;
}
} else {
EQ3index = cnt-3;
MACindex = cnt-2;
CMDindex = cnt-1;
}
int remains = 120;
memset(tmp, 0, sizeof(tmp));
p = tmp;
uint8_t addr[7];
int useAlias = BLE_ESP32::getAddr(addr, items[MACindex]);
int res = 6; // invalid address/alias
// if address or alias valid
if (useAlias){
strncpy(p, items[MACindex], remains-6);
p += strlen(p);
*(p++) = 0x20;
remains = 120 - (p-tmp);
if (CMDindex){
strncpy(p, items[CMDindex], remains-6);
p += strlen(p);
*(p++) = 0x20;
remains = 120 - (p-tmp);
}
strncpy(p, XdrvMailbox.data, remains-6);
p += strlen(p);
*(p++) = 0x20;
remains = 120 - (p-tmp);
*(p++) = 0;
AddLog(LOG_LEVEL_DEBUG,PSTR("EQ3:mqtt->cmdstr %s"), tmp);
res = CmndTrvNext(1, tmp);
}
// post result to stat/tas/EQ3/<MAC> {"result":"<string>"}
EQ3SendResult(items[MACindex], responses[res]);
return true;
}
///////////////////////////////////////////////
// starts a completely fresh MQTT message.
// sends ONE sensor's worth of HA discovery msg
const char EQ3_HA_DISCOVERY_TEMPLATE[] PROGMEM =
"{\"availability\":[],\"device\":"
"{\"identifiers\":[\"BLE%s\"],"
"\"name\":\"%s\","
"\"manufacturer\":\"tas\","
"\"model\":\"%s\","
"\"via_device\":\"%s\""
"},"
"\"dev_cla\":\"%s\","
"\"expire_after\":600,"
"\"json_attr_t\":\"%s\","
"\"name\":\"%s_%s\","
"\"state_topic\":\"%s\","
"\"uniq_id\":\"%s_%s\","
"\"unit_of_meas\":\"%s\","
"\"val_tpl\":\"{{ value_json.%s }}\"}";
///////////TODO - unfinished.....
void EQ3DiscoveryOneEQ3(){
// don't detect half-added ones here
if (EQ3CurrentSingleSlot >= EQ3_NUM_DEVICESLOTS){
// if we got to the end of the sensors, then don't send more
return;
}
#ifdef USE_HOME_ASSISTANT
if(Settings->flag.hass_discovery){
eq3_device_tag *p;
do {
p = &EQ3Devices[EQ3CurrentSingleSlot];
if (0 == p->timeoutTime){
EQ3CurrentSingleSlot++;
}
} while ((0 == p->timeoutTime) && (EQ3CurrentSingleSlot <= EQ3_NUM_DEVICESLOTS));
if (EQ3CurrentSingleSlot >= EQ3_NUM_DEVICESLOTS){
return;
}
// careful - a missing comma causes a crash!!!!
// because of the way we loop?
const char *classes[] = {
"temperature",
"temp",
"°C",
"signal_strength",
"RSSI",
"dB"
};
int datacount = (sizeof(classes)/sizeof(*classes))/3;
if (p->nextDiscoveryData >= datacount){
p->nextDiscoveryData = 0;
}
char DiscoveryTopic[80];
const char *host = NetworkHostname();
const char *devtype = PSTR("EQ3");
char idstr[32];
const char *alias = BLE_ESP32::getAlias(p->addr);
const char *id = idstr;
if (alias && *alias){
id = alias;
} else {
sprintf(idstr, PSTR("%s%02x%02x%02x"),
devtype,
p->addr[3], p->addr[4], p->addr[5]);
}
char SensorTopic[60];
sprintf(SensorTopic, "stat/%s/EQ3/%s",
host, id);
//int i = p->nextDiscoveryData*3;
for (int i = 0; i < datacount*3; i += 3){
if (!classes[i] || !classes[i+1] || !classes[i+2]){
return;
}
ResponseClear();
/*
{"availability":[],"device":{"identifiers":["TasmotaBLEa4c1387fc1e1"],"manufacturer":"simon","model":"someBLEsensor","name":"TASBLEa4c1387fc1e1","sw_version":"0.0.0"},"dev_cla":"temperature","json_attr_t":"stat/tasmota_esp32/SENSOR","name":"TASLYWSD037fc1e1Temp","state_topic":"tele/tasmota_esp32/SENSOR","uniq_id":"Tasmotaa4c1387fc1e1temp","unit_of_meas":"°C","val_tpl":"{{ value_json.LYWSD037fc1e1.Temperature }}"}
{"availability":[],"device":{"identifiers":["TasmotaBLEa4c1387fc1e1"],
"name":"TASBLEa4c1387fc1e1"},"dev_cla":"temperature",
"json_attr_t":"tele/tasmota_esp32/SENSOR",
"name":"TASLYWSD037fc1e1Temp","state_topic": "tele/tasmota_esp32/SENSOR",
"uniq_id":"Tasmotaa4c1387fc1e1temp","unit_of_meas":"°C",
"val_tpl":"{{ value_json.LYWSD037fc1e1.Temperature }}"}
*/
ResponseAppend_P(EQ3_HA_DISCOVERY_TEMPLATE,
//"{\"identifiers\":[\"BLE%s\"],"
id,
//"\"name\":\"%s\"},"
id,
//\"model\":\"%s\",
devtype,
//\"via_device\":\"%s\"
host,
//"\"dev_cla\":\"%s\","
classes[i],
//"\"json_attr_t\":\"%s\"," - the topic the sensor publishes on
SensorTopic,
//"\"name\":\"%s_%s\"," - the name of this DATA
id, classes[i+1],
//"\"state_topic\":\"%s\"," - the topic the sensor publishes on?
SensorTopic,
//"\"uniq_id\":\"%s_%s\"," - unique for this data,
id, classes[i+1],
//"\"unit_of_meas\":\"%s\"," - the measure of this type of data
classes[i+2],
//"\"val_tpl\":\"{{ value_json.%s }}") // e.g. Temperature
classes[i+1]
//
);
sprintf(DiscoveryTopic, "homeassistant/sensor/%s/%s/config",
id, classes[i+1]);
MqttPublish(DiscoveryTopic);
p->nextDiscoveryData++;
//vTaskDelay(100/ portTICK_PERIOD_MS);
}
} // end if hass discovery
//AddLog_P(LOG_LEVEL_DEBUG,PSTR("M32: %s: show some %d %s"),D_CMND_MI32, MI32.mqttCurrentSlot, TasmotaGlobal.mqtt_data);
#endif //USE_HOME_ASSISTANT
}
} // end namespace EQ3_ESP32
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
bool Xdrv85(uint8_t function)
{
bool result = false;
switch (function) {
case FUNC_INIT:
EQ3_ESP32::EQ3Init();
break;
case FUNC_EVERY_50_MSECOND:
EQ3_ESP32::EQ3Every50mSecond();
break;
case FUNC_EVERY_SECOND:
EQ3_ESP32::EQ3EverySecond(false);
break;
case FUNC_COMMAND:
result = DecodeCommand(EQ3_ESP32::kEQ3_Commands, EQ3_ESP32::EQ3_Commands);
break;
case FUNC_MQTT_DATA:
//AddLog(LOG_LEVEL_INFO,PSTR("topic %s"), XdrvMailbox.topic);
result = EQ3_ESP32::mqtt_direct();
break;
case FUNC_JSON_APPEND:
break;
#ifdef USE_WEBSERVER
case FUNC_WEB_SENSOR:
break;
#endif // USE_WEBSERVER
}
return result;
}
#endif //
#endif // ESP32
#endif
#endif // CONFIG_IDF_TARGET_ESP32
Reference in New Issue View Git Blame Copy Permalink