mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
Tasmota/tools/decode-status.py

282 lines
11 KiB
Python
Executable File
Raw Blame History

#!/usr/bin/env python
"""
decode-status.py - decode status for Sonoff-Tasmota
Copyright (C) 2019 Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
Requirements:
- Python
- pip json pycurl
Instructions:
Execute command with option -d to retrieve status report from device or
get a copy of the status message with http command http://sonoff/cm?cmnd=status%200
and store it in file status.json
Usage:
./decode-status.py -d <hostname or IP address> [-u username] [-p password]
or
./decode-status.py -f <JSON status information file>
Example:
./decode-status.py -d sonoff1
./decode-status.py -d sonoff1 -p 12345678
or
./decode-status.py -f status.json
"""
import io
import os.path
import json
import pycurl
import urllib2
from sys import exit
from optparse import OptionParser
from StringIO import StringIO
a_on_off = ["OFF","ON "]
a_setoption = [[
"Save power state and use after restart",
"Restrict button actions to single, double and hold",
"(not used) Show value units in JSON messages",
"MQTT enabled",
"Respond as Command topic instead of RESULT",
"MQTT retain on Power",
"MQTT retain on Button",
"MQTT retain on Switch",
"Convert temperature to Fahrenheit",
"MQTT retain on Sensor",
"MQTT retained LWT to OFFLINE when topic changes",
"Swap Single and Double press Button",
"Do not use flash page rotate",
"Button single press only",
"Power interlock mode",
"Do not allow PWM control",
"Reverse clock",
"Allow entry of decimal color values",
"CO2 color to light signal",
"HASS discovery",
"Do not control Power with Dimmer",
"Energy monitoring while powered off",
"MQTT serial",
"MQTT serial binary",
"Convert pressure to mmHg",
"KNX enabled",
"Use Power device index on single relay devices",
"KNX enhancement",
"RF receive decimal",
"IR receive decimal",
"Enforce HASS light group",
"Do not show Wifi and Mqtt state using Led"
],[
"Key hold time (ms)",
"Sonoff POW Max_Power_Retry",
"(not used) Tuya MCU device id",
"(not used) mDNS delayed start (Sec)",
"Boot loop retry offset (0 = disable)",
"RGBWW remap",
"IR Unknown threshold",
"CSE7766 invalid power margin",
"Ignore hold time (s)",
"(not used) Number of Tuya MCU relays",
"Over temperature threshold (celsius)",
"(not used) Tuya MCU max dimmer value",
"(not used) Tuya MCU voltage Id",
"(not used) Tuya MCU current Id",
"(not used) Tuya MCU power Id",
"Energy Tariff1 start hour",
"Energy Tariff2 start hour",
"",
],[
"Timers enabled",
"Generic ESP8285 GPIO enabled",
"Add UTC time offset to JSON message",
"Show hostname and IP address in GUI",
"Apply SetOption20 to Tuya",
"mDNS enabled",
"Use wifi network scan at restart",
"Use wifi network rescan regularly",
"Add IR raw data to JSON message",
"Change state topic from tele/STATE to stat/RESULT",
"Enable normal sleep instead of dynamic sleep",
"Force local operation when button/switch topic is set",
"Do not use retain flag on HOLD messages",
"Do not scan relay power state at restart",
"Use _ instead of - as sensor index separator",
"Disable fast power cycle detection for device reset",
"(not used) Disable Dimmer range 255 slider control",
"Enable buzzer when available",
"Enable multi-channels PWM instead of Color PWM",
"(not used) Limits Tuya MCU dimmers to minimum of 10% (25) when enabled",
"Enable Weekend Energy Tariff",
"Select different Modbus registers for Active Energy",
"","",
"","","","",
"","",
"Enable shutter support",
"Invert PCF8574 ports"
]]
a_features = [[
"USE_ENERGY_MARGIN_DETECTION","USE_LIGHT","USE_I2C","USE_SPI",
"USE_DISCOVERY","USE_ARDUINO_OTA","USE_MQTT_TLS","USE_WEBSERVER",
"WEBSERVER_ADVERTISE","USE_EMULATION_HUE","MQTT_PUBSUBCLIENT","MQTT_TASMOTAMQTT",
"MQTT_ESPMQTTARDUINO","MQTT_HOST_DISCOVERY","USE_ARILUX_RF","USE_WS2812",
"USE_WS2812_DMA","USE_IR_REMOTE","USE_IR_HVAC","USE_IR_RECEIVE",
"USE_DOMOTICZ","USE_DISPLAY","USE_HOME_ASSISTANT","USE_SERIAL_BRIDGE",
"USE_TIMERS","USE_SUNRISE","USE_TIMERS_WEB","USE_RULES",
"USE_KNX","USE_WPS","USE_SMARTCONFIG","USE_ENERGY_POWER_LIMIT"
],[
"USE_CONFIG_OVERRIDE","FIRMWARE_MINIMAL","FIRMWARE_SENSORS","FIRMWARE_CLASSIC",
"FIRMWARE_KNX_NO_EMULATION","USE_DISPLAY_MODES1TO5","USE_DISPLAY_GRAPH","USE_DISPLAY_LCD",
"USE_DISPLAY_SSD1306","USE_DISPLAY_MATRIX","USE_DISPLAY_ILI9341","USE_DISPLAY_EPAPER",
"USE_DISPLAY_SH1106","USE_MP3_PLAYER","USE_PCA9685","USE_TUYA_DIMMER",
"USE_RC_SWITCH","USE_ARMTRONIX_DIMMERS","USE_SM16716","USE_SCRIPT",
"USE_EMULATION_WEMO","USE_SONOFF_IFAN","USE_ZIGBEE","NO_EXTRA_4K_HEAP",
"VTABLES_IN_IRAM","VTABLES_IN_DRAM","VTABLES_IN_FLASH","PIO_FRAMEWORK_ARDUINO_LWIP_HIGHER_BANDWIDTH",
"PIO_FRAMEWORK_ARDUINO_LWIP2_LOW_MEMORY","PIO_FRAMEWORK_ARDUINO_LWIP2_HIGHER_BANDWIDTH","DEBUG_THEO","USE_DEBUG_DRIVER"
],[
"USE_COUNTER","USE_ADC_VCC","USE_ENERGY_SENSOR","USE_PZEM004T",
"USE_DS18B20","USE_DS18x20_LEGACY","USE_DS18x20","USE_DHT",
"USE_SHT","USE_HTU","USE_BMP","USE_BME680",
"USE_BH1750","USE_VEML6070","USE_ADS1115_I2CDEV","USE_ADS1115",
"USE_INA219","USE_SHT3X","USE_MHZ19","USE_TSL2561",
"USE_SENSEAIR","USE_PMS5003","USE_MGS","USE_NOVA_SDS",
"USE_SGP30","USE_SR04","USE_SDM120","USE_SI1145",
"USE_SDM630","USE_LM75AD","USE_APDS9960","USE_TM1638"
],[
"USE_MCP230xx","USE_MPR121","USE_CCS811","USE_MPU6050",
"USE_MCP230xx_OUTPUT","USE_MCP230xx_DISPLAYOUTPUT","USE_HLW8012","USE_CSE7766",
"USE_MCP39F501","USE_PZEM_AC","USE_DS3231","USE_HX711",
"USE_PZEM_DC","USE_TX20_WIND_SENSOR","USE_MGC3130","USE_RF_SENSOR",
"USE_THEO_V2","USE_ALECTO_V2","USE_AZ7798","USE_MAX31855",
"USE_PN532_I2C","USE_MAX44009","USE_SCD30","USE_HRE",
"USE_ADE7953","USE_SPS30","USE_VL53L0X","USE_MLX90614",
"USE_MAX31865","USE_CHIRP","USE_SOLAX_X1","USE_PAJ7620"
],[
"USE_BUZZER","USE_RDM6300","USE_IBEACON","USE_SML_M",
"USE_INA226","USE_A4988_STEPPER","USE_DDS2382","USE_SM2135",
"USE_SHUTTER","USE_PCF8574","USE_DDSU666","USE_DEEPSLEEP",
"USE_SONOFF_SC","USE_SONOFF_RF","USE_SONOFF_L1","USE_EXS_DIMMER",
"USE_ARDUINO_SLAVE","","","",
"","","","",
"","","","",
"","","",""
]]
usage = "usage: decode-status {-d | -f} arg"
parser = OptionParser(usage)
parser.add_option("-d", "--dev", action="store", type="string",
dest="device", help="device to retrieve status from")
parser.add_option("-u", "--username", action="store", type="string",
dest="username", help="username for login", default="admin")
parser.add_option("-p", "--password", action="store", type="string",
dest="password", help="password for login", default=None)
parser.add_option("-f", "--file", metavar="FILE",
dest="jsonfile", default="status.json", help="status json file (default: status.json)")
(options, args) = parser.parse_args()
if (options.device):
buffer = StringIO()
loginstr = ""
if options.password is not None:
loginstr = "user={}&password={}&".format(urllib2.quote(options.username), urllib2.quote(options.password))
url = str("http://{}/cm?{}cmnd=status%200".format(options.device, loginstr))
c = pycurl.Curl()
c.setopt(c.URL, url)
c.setopt(c.WRITEDATA, buffer)
c.perform()
c.close()
body = buffer.getvalue()
obj = json.loads(body)
else:
jsonfile = options.jsonfile
with open(jsonfile, "r") as fp:
obj = json.load(fp)
def StartDecode():
print ("\n*** decode-status.py v20190819 by Theo Arends and Jacek Ziolkowski ***")
# print("Decoding\n{}".format(obj))
if "StatusSNS" in obj:
if "Time" in obj["StatusSNS"]:
time = str(" from status report taken at {}".format(obj["StatusSNS"]["Time"]))
if "Status" in obj:
if "FriendlyName" in obj["Status"]:
print("Decoding information for device {}{}".format(obj["Status"]["FriendlyName"][0], time))
if "StatusLOG" in obj:
if "SetOption" in obj["StatusLOG"]:
options = []
i = 0
for r,opt_group in enumerate(a_setoption):
register = obj["StatusLOG"]["SetOption"][r]
if r > 0 and len(obj["StatusLOG"]["SetOption"]) == 2: # old firmware: array consisted only of SetOptions 0..31 and resolution
break
if r == 1:
if len(register) == 8: # pre 6.1.1.14: array consisted of SetOptions 0..31, resolution, and SetOptions 50..81
i += 18 # adjust option index and skip 2nd register
continue
elif len(register) == 36: # 6.1.1.14: array consists of SetOptions 0..31, SetOptions 32..49, and SetOptions 50..81
split_register = [int(register[opt*2:opt*2+2],16) for opt in range(18)] # split register into 18 values
for opt_idx, option in enumerate(opt_group):
options.append(str("{0:2d} ({1:3d}) {2}".format(i, split_register[opt_idx], option)))
i += 1
if r in (0, 2): #registers 1 and 3 hold binary values
for opt_idx, option in enumerate(opt_group):
i_register = int(register,16)
state = (i_register >> opt_idx) & 1
options.append(str("{0:2d} ({1}) {2}".format(i, a_on_off[state], option)))
i += 1
print("\nOptions")
for o in options:
print(" {}".format(o))
if "StatusMEM" in obj:
if "Features" in obj["StatusMEM"]:
features = []
for f in range(6):
feature = obj["StatusMEM"]["Features"][f]
i_feature = int(feature,16)
if f == 0:
features.append(str("Language LCID = {}".format(i_feature & 0xFFFF)))
else:
for i in range(len(a_features[f -1])):
if (i_feature >> i) & 1:
features.append(a_features[f -1][i])
features.sort()
print("\nFeatures")
for f in features:
print(" {}".format(f))
if __name__ == "__main__":
try:
StartDecode()
except Exception as e:
print("E: {}".format(e))
Reference in New Issue View Git Blame Copy Permalink