mirror of https://github.com/arendst/Tasmota.git
528 lines
20 KiB
C++
528 lines
20 KiB
C++
/* 3.9.8 20170130
|
|
* Remove GPIO07 and GPIO08 from user selectable (#5)
|
|
*
|
|
* 3.9.7 20170129
|
|
* Fix possible WS2812 exceptions when using emulation
|
|
* Add command Emulation to dynamic configure Belkin WeMo and Hue Bridge for Alexa
|
|
*
|
|
* 3.9.6 20170129
|
|
* Add dynamic sleep for WS2812 animation (#1)
|
|
*
|
|
* 3.9.5 20170128
|
|
* Fix error message in case of wrong Domoticz command
|
|
*
|
|
* 3.9.4 20170127
|
|
* Fix Sonoff Dual Relay switching (#287)
|
|
*
|
|
* 3.9.3 20170127
|
|
* Add confirmation before Restart via webpage
|
|
* Expand Domoticz Configuration webpage with Key, Switch and Sensor Index and
|
|
* add commands DomoticzSwitchIdx and DomoticzSensorIdx (#86) (#174) (#219)
|
|
* Fix default DHT11 sensor driver selection
|
|
* Fix LedPower status after button press (#279)
|
|
* Add command Sleep 0 - 250 mSec for optional light sleep mode to lower energy consumption (#272)
|
|
* (Expect overall button/key/switch misses and wrong values on Sonoff Pow)
|
|
* Add Hue brightness extension (#281)
|
|
* Fix Hue brightness and change to call by reference (#283)
|
|
*
|
|
* 3.9.2 20170124
|
|
* Add confirmation before Reset Configuration via webpage (#244)
|
|
* Add WS2812 features (see Wiki commands)
|
|
*
|
|
* 3.9.1 20170124
|
|
* Change PowerOnState function to only trigger when Power On (and not just restart) (#238)
|
|
* Move HLW interrupts back to RAM and make WS2812_DMA optional as it generates Exception on Pow (#264)
|
|
* Add charset=utf-8 to webpages (#266)
|
|
* Update Hue emulation (#268)
|
|
* Fix status module number
|
|
* Add support for domoticz Dimmer on Sonoff_Led and WS2812
|
|
* Fix possible ESP8285 flash problem by updating Flash Chip Mode to DOUT during web upload
|
|
*
|
|
* 3.2.6a 20170120
|
|
* Fix Sonoff Pow compile error (#255)
|
|
* Move HLW interrupts back to ROM (Needed for WS2812 DMA interrupts)
|
|
* Removed all IO config from user_config.h as this will be done by commands or webpage
|
|
* Removed MessageFormat and supports JSON only except POWER/LIGHT status
|
|
* Add command LedPower to control main led (#247)
|
|
* Add more FriendlyNames for Hue (#254)
|
|
* Add DMA support for WS2812 when using pin 3 while other pins work just as well in my case...
|
|
* Add HUE emulation for Alexa (#229)
|
|
* Add basic WS2812 support (#229)
|
|
* Fix Wemo when MQTT is disabled (#245)
|
|
* Revert ButtonTopic and change SwitchTopic1 - 4 to one SwitchTopic
|
|
* Rename MqttUnits to Units
|
|
* Add Mqtt command to enable/disable MQTT
|
|
*
|
|
* 3.2.2a 20170115
|
|
* Add dynamic (Sonoff) Module, user GPIO and sensor selection (one size fits (almost) all)
|
|
* Add support for Sonoff LED
|
|
* Add Seriallog disable after 600 seconds for Sonoff Dual and 4 Channel
|
|
* Add ButtonTopic2 - 4, SwitchTopic1 - 4 and SwitchRetain
|
|
*
|
|
* 3.2.2 20170113
|
|
* Fix PowerOnState 2 functionality after re-applying power (#230)
|
|
*
|
|
* 3.2.1 20170113
|
|
* Fix some failed command decoding (#228)
|
|
* Removed passwords from status messages (#216)
|
|
*
|
|
* 3.2.0 20170111
|
|
* Add I2C BH1750 sensor (#222)
|
|
* Sensor rewrite preparing for online selection
|
|
*
|
|
* 3.1.16 20170109
|
|
* Fix Domoticz possible error condition
|
|
* Remove Wifi password from connection message (#216)
|
|
* Add Configure Other menu item to web page (#209)
|
|
* Add command FriendlyName, field Friendly Name and define FRIENDLY_NAME to be used by Alexa
|
|
* eliminating current use of MQTT_CLIENT_ID (#209)
|
|
* Add friendlyname to webpage replacing former hostname
|
|
*
|
|
* 3.1.15 20170108
|
|
* Fix Domoticz send key regression with Toggle command
|
|
*
|
|
* 3.1.14 20170107
|
|
* Add support for command TOGGLE (define MQTT_CMND_TOGGLE) when ButtonTopic is in use and not equal to Topic (#207)
|
|
*
|
|
* 3.1.13 20170107
|
|
* Fix web console command input when SUB_PREFIX contains '/' (#152)
|
|
* Add command response to web command (#200)
|
|
* Add option to disable MQTT as define USE_MQTT in user_config.h (#200)
|
|
*
|
|
* 3.1.12 20170106
|
|
* Add OTA retry to solve possible HTTP transient errors (#204)
|
|
* Fix MQTT host discovery
|
|
*
|
|
* 3.1.11 20170105
|
|
* Add mDNS to advertise webserver as <hostname>.local/
|
|
*
|
|
* 3.1.10 20170105
|
|
* Fix ButtonTopic when SUB_PREFIX = PUB_PREFIX
|
|
* Add workaround for possible MQTT queueing when SUB_PREFIX = PUB_PREFIX
|
|
* Add optional MQTT host discovery using define USE_DISCOVERY in user_config.h (#115)
|
|
*
|
|
* 3.1.9 20170104
|
|
* Fix Power Blink start position (toggled)
|
|
* Change PulseTime increments: 1 .. 111 in 0.1 sec (max 11 seconds) and 112 .. 64900 in seconds (= 12 seconds until 18 hours) (#188)
|
|
* Add support for SUB_PREFIX = PUB_PREFIX (#190)
|
|
*
|
|
* 3.1.8 20170103
|
|
* Add retain flag to LWT offline and only send "tele/sonoff/LWT Offline" (#179)
|
|
* Change retained LWT Online message to only send "tele/sonoff/LWT Online"
|
|
*
|
|
* 3.1.7 20161231
|
|
* Add retained message LWT Online when sonoff makes MQTT connection (#179)
|
|
*
|
|
* 3.1.6 20161230
|
|
* Add blinking using commands BlinkTime, BlinkCount and Power Blink|3|BlinkOff|4 (#165)
|
|
*
|
|
* 3.1.5 20161228
|
|
* Fix serial space command exception (28)
|
|
*
|
|
* 3.1.4 20161227
|
|
* Fix MQTT subscribe regression exception (3) (#162)
|
|
* Fix serial empty command exception (28)
|
|
*
|
|
* 3.1.3 20161225
|
|
* Extent Domoticz configuration webpage with optional indices (#153)
|
|
* Fix multi relay legacy tele message from tele/sonoff/2/POWER to tele/sonoff/POWER2
|
|
* Add support for iTead Motor Clockwise/Anticlockwise
|
|
*
|
|
* 3.1.2 20161224
|
|
* Extent command PowerOnState with toggle at power on (option 2 is now option 3!) (#156)
|
|
*
|
|
* 3.1.1 20161223
|
|
* Add support for Sonoff Touch and Sonoff 4CH (#40)
|
|
* Update DomoticzIdx and DomoticzKeyIdx with relay/key index (DomoticzIdx1/DomoticzKeyIdx1)
|
|
* Add command PowerOnState to control relay(s) at power on (#154)
|
|
*
|
|
* 3.1.0 20161221
|
|
* Add Sonoff Pow measurement smoothing
|
|
* Fix serial command topic preamble error (#151)
|
|
* Fix 2.x to 3.x migration inconsistencies (#146)
|
|
*
|
|
* 3.0.9 20161218
|
|
* Add Sonoff Pow voltage reading when relay is on but no load present (#123)
|
|
*
|
|
* 3.0.8 20161218
|
|
* Add temperature conversion to Fahrenheit as option in user_config.h (TEMP_CONVERSION) (#145)
|
|
*
|
|
* 3.0.7 20161217
|
|
* Add user_config_override.h to be used by user to override some defaults in user_config.h (#58)
|
|
* Fix Sonoff Pow low power (down to 4W) intermittent measurements (#123)
|
|
*
|
|
* 3.0.6 20161217
|
|
* Fix MQTT_CLIENT_ID starting with % sign as in "%06X" (#142)
|
|
* Add auto power off after PulseTime * 0.1 Sec to relay 1 (#134)
|
|
*
|
|
* 3.0.5 20161215
|
|
* Add more control over LED with command LedState options (#136, #143)
|
|
* LED_OFF (0), LED_POWER (1), LED_MQTTSUB (2), LED_POWER_MQTTSUB (3), LED_MQTTPUB (4), LED_POWER_MQTTPUB (5), LED_MQTT (6), LED_POWER_MQTT (7)
|
|
* Add option WIFI_RETRY (4) to command WifiConfig to allow connection retry to other AP without restart (#73)
|
|
*
|
|
* 3.0.4 20161211
|
|
* Fix intermittent Domoticz update misses (#133)
|
|
*
|
|
* 3.0.3 20161210
|
|
* Fix compiler warnings (#132)
|
|
* Remove redundant code
|
|
* Fix Domoticz pushbutton support
|
|
*
|
|
* 3.0.2 20161209
|
|
* Add pushbutton to SwitchMode (#130)
|
|
*
|
|
* 3.0.1 20161209
|
|
* Fix initial config
|
|
*
|
|
* 3.0.0 20161208
|
|
* Migrate and clean-up flash layout
|
|
* Settings from version 2.x are saved but settings from version 3.x can not be used with version 2.x
|
|
* Change SEND_TELEMETRY_RSSI to SEND_TELEMETRY_WIFI and add AP and SSID to telemetry
|
|
* Split long JSON messages
|
|
* Fix inconsistent status messages
|
|
* Fix all status messages to return JSON if enabled
|
|
* Remove relay index in cmnd/sonoff/<relay>/POWER now changed
|
|
* to cmnd/sonoff/POWER for single relay units
|
|
* and cmnd/sonoff/POWER<relay> for multi relay units like Sonoff dual
|
|
* Add retain option to Power/Light status controlled by command PowerRetain On|Off (#126)
|
|
*
|
|
* 2.1.2 20161204
|
|
* Add support for second wifi AP (#73)
|
|
* Update command WifiConfig
|
|
* Fix possible WifiManager hang
|
|
*
|
|
* 2.1.1a 20161203
|
|
* Fix scan for wifi networks if WeMo is enabled
|
|
* Fix syslog setting using web page
|
|
*
|
|
* 2.1.1 20161202
|
|
* Add support for ElectroDragon second relay and button (only toggle with optional ButtonTopic) (#110)
|
|
*
|
|
* 2.1.0 20161202
|
|
* Add optional EXPERIMENTAL TLS to MQTT (#49)
|
|
* Fix MQTT payload handling (#111)
|
|
* Optimzed WeMo code
|
|
*
|
|
* 2.0.21a 20161201
|
|
* Fix WeMo PowerPlug emulation
|
|
*
|
|
* 2.0.21 20161130
|
|
* Add Belkin WeMo PowerPlug emulation enabled with USE_WEMO_EMULATION in user_config.h (Heiko Krupp) (#105, #109)
|
|
*
|
|
* 2.0.20 20161130
|
|
* Relax MQTTClient naming but only allows hexadecimal uppercase numbers (#107)
|
|
* Add I2C support with command I2CScan
|
|
* Add I2C sensor driver for HTU21 as alternate sensor using TH10/16 connectors (Heiko Krupp) (#105)
|
|
* Add I2C sensor driver for BMP085/BMP180/BMP280/BME280 as alternate sensor using TH10/16 connectors
|
|
*
|
|
* 2.0.19a 20161127
|
|
* Add support for ButtonTopic and ButtonRetain to wall switch function
|
|
* Add pullup to SWITCH_PIN and command SwitchMode to syntax
|
|
*
|
|
* 2.0.18 20161126
|
|
* Add SUB_PREFIX multi level support allowing 'cmnd' or 'cmnd/level2/level3'
|
|
* Add wall switch function to GPIO14 and command SwitchMode (Alex Scott) (#103)
|
|
*
|
|
* 2.0.17 20161123
|
|
* Calibrate HLWPCAL from 12345 to 12530
|
|
* Add alternative sensor driver DHT2 using Adafruit DHT library
|
|
* Add define MESSAGE_FORMAT to user_config.h
|
|
* Throttle console messages
|
|
* Shorten JSON messages
|
|
* Fix possible Panic
|
|
* Fix User mode webserver security
|
|
*
|
|
* 2.0.16 20161118
|
|
* Add alternative sensor driver DS18x20 using OneWire library (#95)
|
|
* Change sensor MQTT message from tele/sonoff/TEMPERATURE to tele/sonoff/DHT/TEMPERATURE or
|
|
* tele/sonoff/DS18B20/TEMPERATURE or tele/sonoff/DS18x20/1/TEMPERATURE
|
|
* Add sensors to root webpage and auto refresh every 4 seconds (#92)
|
|
* Add optional JSON messageformat to all telemetry data
|
|
* Enforce minimum TelePeriod to be 10 seconds
|
|
* Fix Energy Yesterday reset after restart
|
|
* Add Energy Today restore after controlled restart
|
|
*
|
|
* 2.0.15 20161116
|
|
* Change TODAY_POWER and PERIOD_POWER to TODAY_ENERGY and PERIOD_ENERGY
|
|
* Fix serial regression
|
|
* Fix syslog hangs when loghost is unavailable
|
|
*
|
|
* 2.0.14 20161115
|
|
* Add HLW threshold delay
|
|
* Fix HLW intermittent current deviation
|
|
* Fix button functionality during wificonfig
|
|
* Add CRC check to DS18B20 sensor (#88)
|
|
*
|
|
* 2.0.13 20161113
|
|
* Add additional upload error code descriptions
|
|
* Add PlatformIO support (#80)
|
|
*
|
|
* 2.0.12 20161113
|
|
* Fix Serial and Web response regression when no MQTT connection available
|
|
* Fix Sonoff Dual power telemetric data for second relay
|
|
* Removed MQTT password from Information web page
|
|
* Hide MQTT password from Configure MQTT web page
|
|
*
|
|
* 2.0.11 20161111
|
|
* Rewrite button and web toggle code
|
|
* Fix NTP sync
|
|
* Add HLW calibration commands HLWPCAL, HLWUCAL and HLWICAL (need define USE_POWERCALIBRATION)
|
|
* Fix power threshold tests
|
|
*
|
|
* 2.0.10 20161109
|
|
* Add additional Domoticz define (#63)
|
|
* Add defines MQTT_STATUS_ON and MQTT_STATUS_OFF in user_config.h to select status On/Off string
|
|
* Fix status response differences (#65)
|
|
* Fix divide by zero exception (#70)
|
|
* Fix syslog loop exception
|
|
*
|
|
* 2.0.9 20161108
|
|
* clarify MODULE in user_config.h
|
|
* Fix hlw false values
|
|
*
|
|
* 2.0.8 20161108
|
|
* Add initial status after power on
|
|
* Seperate driver files
|
|
* Fix hlw code and calibrate Pow
|
|
* Move user config defines to user_config.h (#61)
|
|
*
|
|
* 2.0.7 20161030
|
|
* Make Ticker mandatory
|
|
* Add Domoticz support (Increase MQTT_MAX_PACKET_SIZE to 400) (#54)
|
|
* Add command MessageFormat 0|1 to select either legacy or JSON output
|
|
*
|
|
* 2.0.6 20161024
|
|
* Add Sonoff Pow power factor
|
|
* Initial support for up to four relays using iTEAD PSB (4Channel)
|
|
* - Currently only supports one button (All buttons behave the same)
|
|
* - Use command MODEL 4 to select four relay option
|
|
* (After first power on it will support 2 relays like Sonoff Dual)
|
|
* Fix ledstate
|
|
* Add command Status 9 to display Sonoff Pow thresholds
|
|
* Add commands PowerLow, PowerHigh, VoltageLow, VoltageHigh, CurrentLow and CurrentHigh for use
|
|
* with Sonoff Pow thresholds
|
|
*
|
|
* 2.0.5 20161018
|
|
* Add updates to user_config.h - moved SEND_TELEMETRY_DS18B20 and SEND_TELEMETRY_DHT to module area.
|
|
* As Sonoff TH10/16 does not have the logic installed for GPIO04 You'll have to select ONE of both
|
|
* Add Sonoff Pow support (experimental until Pow tested)
|
|
* Add command Status 8 to display Sonoff Pow energy values
|
|
* Add command MqttUnits On|Off to add units to values
|
|
* Change web main page header character size
|
|
* Change On/Off to ON/OFF status messages to satisfy openHAB
|
|
* Change TEMP to TEMPERATURE and HUM to HUMIDITY
|
|
*
|
|
* 2.0.4 20161009
|
|
* Add MQTT_BUTTON_RETAIN, SAVE_DATA and SAVE_STATE defines to user_config.h (#35)
|
|
* Update ButtonRetain to remove retained message(s) from broker when turned off
|
|
* Add Retain for second relay on Sonoff Dual
|
|
* Provide power status messages with device topic index if requested
|
|
*
|
|
* 2.0.3 20161008
|
|
* Update wifi initialization
|
|
* Add command BUTTONRETAIN for optional MQTT retain on button press (#35)
|
|
* Add command SAVESTATE to disable power state save. May be used with MQTT retain
|
|
*
|
|
* 2.0.2 20161006
|
|
* Fix wifi issue 2186
|
|
*
|
|
* 2.0.1 20161002
|
|
* Fix button press
|
|
*
|
|
* 2.0.0 20161002
|
|
* Update Sonoff TH10/16 sensor pins (My TH10 only has GPIO14 connected)
|
|
* Add full support for Sonoff dual
|
|
*
|
|
* 1.0.35 20160929
|
|
* Add more lines to console
|
|
* Add timeout and disable MQTT on web upload
|
|
* Add command SAVEDATA to control parameter save (for flash wear afficionados) (#30)
|
|
*
|
|
* 1.0.34 20160926
|
|
* Fix button press six and seven
|
|
* Add more information to webserver
|
|
*
|
|
* 1.0.33 20160915
|
|
* Better WPS error message
|
|
* Separate webserver code from support.ino into webserver.ino
|
|
* Fix webserver User by removing unwanted restart option
|
|
*
|
|
* 1.0.32 20160913
|
|
* Add Wifi Protected Setup (WPS) as third option for initial config
|
|
* Add command WIFICONFIG replacing deprecated command SMARTCONFIG
|
|
* Add option WIFICONFIG 3 to start WPSconfig
|
|
* Add option WIFICONFIG 0 to start saved Wifi config tool (WPSconfig, Smartconfig or Wifimanager)
|
|
* Change button behaviour - See Wiki
|
|
*
|
|
* 1.0.31 20160907
|
|
* Fix DS18B20 misread if teleperiod = 2
|
|
* Tuned sensor code
|
|
* Updated prefered ElectroDragon connection to Relay 1 and Button 1
|
|
* Moved SONOFF and ELECTRO_DRAGON port config to user_config.h
|
|
*
|
|
* 1.0.30 20160902
|
|
* Fix command TELEPERIOD 0
|
|
* Add ESP- tag to UDP log message for easy rsyslogd filtering
|
|
* Add ElectroDragon (Relay 2 only) functionality. Select with #define MODULE ELECTRO_DRAGON
|
|
* Add ? as null message alternative
|
|
* Add DHT temperature and humidity telemetry support. Enable with #define SEND_TELEMETRY_DHT
|
|
* Add DS18B20 temperature telemetry support. Enable with #define SEND_TELEMETRY_DS18B20
|
|
* Restrict HOSTNAME, MQTTCLIENT, TOPIC and BUTTONTOPIC in topic mode only
|
|
*
|
|
* 1.0.29 20160831
|
|
* Allow UPGRADE, OTAURL, RESTART, RESET, MQTTHOST, MQTTPORT, MQTTUSER, MQTTPASSWORD and WEBSERVER also in group mode
|
|
*
|
|
* 1.0.28 20160831
|
|
* Add webserver state to status 5
|
|
* Add optional PUB_PREFIX2 (tele) for telemetry usage
|
|
* Add command TELEPERIOD
|
|
* Fix syntax message
|
|
* Change memory status display
|
|
*
|
|
* 1.0.27 20160831
|
|
* Add sketch flash size
|
|
* Add console to webserver
|
|
* Add command weblog
|
|
* Change WifiManager web pages to minimal
|
|
* Change display default hostname and MQTT client id in webserver
|
|
* Change HTTP command interface to http://sonoff-1234/cm?cmnd=light 2
|
|
* Change HEARTBEAT to UPTIME
|
|
*
|
|
* 1.0.26 20160829
|
|
* Add define USE_WEBSERVER to disable web server code in source
|
|
* Add file upload as alternative for ota upload to webserver
|
|
* Add information to webserver
|
|
* Add command hostname
|
|
* Add command logport
|
|
* Change HTTP command interface to http://sonoff-1234/cmd?cmnd=light 2
|
|
* Change button behaviour with regards to Smartconfig and OTA upload. See README.md
|
|
* Enforce default hostname to either "%s-%04d" or user defined without any %
|
|
* Enforce default mqtt client id to either "DVES_%06X" or user defined without any %
|
|
*
|
|
* 1.0.25 20160822
|
|
* Remove config system halts to keep ota available
|
|
*
|
|
* 1.0.24 20160821
|
|
* Add test for MQTT_SUBTOPIC
|
|
* Change log range to LOG_LEVEL_ALL
|
|
* Change MQTT introduction messages
|
|
* Moved MQTT_MAX_PACKET_SIZE warning message to introduction messages
|
|
*
|
|
* 1.0.23 20160821
|
|
* Add option USE_SPIFFS to move config from flash to spiffs
|
|
* Add webserver with options 0 (off), 1 (user) and 2 (admin)
|
|
* Add HTTP command interface (http://sonoff-1234/c?cmnd=light 2)
|
|
* Add wifimanager countdown counter
|
|
* Add command line webpage
|
|
* Add relay control to wifimanager
|
|
* Add restart option 99 to force restart
|
|
* Fix wifi hostname
|
|
* Fix NETBIOS hostname problem by reducing default hostname length
|
|
* Fix possible exception if WIFI_HOSTNAME is changed
|
|
* Fix upgrade messages
|
|
* Reduce memory use by redesigning config routines
|
|
* Split syntax message
|
|
* Rename define SERIAL_IO to USE_SERIAL
|
|
*
|
|
* 1.0.22 20160814
|
|
* Add all MQTT parameters for configuration
|
|
* Add wifimanager to configure Wifi and MQTT via web server
|
|
* Change NTP time handling
|
|
* Fix Smartconfig parameter buffer overflow
|
|
* Fix PlatformIO warnings
|
|
*
|
|
* 1.0.21 20160808
|
|
* Remove semaphore as subscription flooding (more than 15 subscriptions per second) is managed by SDK (LmacRxBlk:1)
|
|
* Add optional RTC interrupt (define USE_TICKER) to keep RTC synced during subscription flooding
|
|
* Remove heartbeatflag
|
|
*
|
|
* 1.0.20 20160805
|
|
* Add semaphore to handle out of memory when too many subscriptions requested
|
|
* Use Daylight Saving (DST) parameters from user_config.h when timezone = 99
|
|
* Add status 7 option displaying RTC information
|
|
* Add ledstate to status 0
|
|
*
|
|
* 1.0.19 20160803
|
|
* Fix possible MQTT_CLIENT_ID induced Exception(28)
|
|
*
|
|
* 1.0.18 20160803
|
|
* Moved Cfg_Default
|
|
* Fix negative data handling
|
|
* Remove MQTT information from status 1 and add labels to status 1
|
|
* Add mac address to status 5
|
|
* Add MQTT ClientId, UserId and Password to status 6
|
|
*
|
|
* 1.0.17 20160731
|
|
* Better variable range checking
|
|
* Change ambiguous connection messages
|
|
* Add timestamp to serial message
|
|
*
|
|
* 1.0.16 20160729
|
|
* Moved wifi, rtc, syslog and config to support.ino
|
|
* Fixed button action when buttontopic is used. Introduced with 1.0.15
|
|
* Better buffer overflow checks (strlcpy)
|
|
*
|
|
* 1.0.15 20160728
|
|
* Removed pubsubclient config changes from sonoff.ino as it doesn't work
|
|
* reapply MQTT_MAX_PACKET_SIZE 256 and MQTT_KEEPALIVE 120 to PubSubClient.h
|
|
* Add status 0 option displaying all status messages
|
|
* Change MQTT_MAX_PACKET_SIZE from 1024 to 256
|
|
* Add buffer overflow checks (snprintf and strncpy)
|
|
* Implemented common string sizes
|
|
*
|
|
* 1.0.14 20160722
|
|
* Seperate user config from sonoff.ino to user_config.h (pucebaboon)
|
|
* Change defaults from sidnas2 to domus1
|
|
* Add MQTT status message as status 6 (pucebaboon)
|
|
* Add status type to message (pucebaboon)
|
|
* Add pubsubclient config changes to sonoff.ino (pucebaboon)
|
|
*
|
|
* 1.0.13 20160702
|
|
* Add Ledstate 1 option to show power state on led
|
|
*
|
|
* 1.0.12 20160529
|
|
* Allow disable of button topic using "0"
|
|
*
|
|
* 1.0.11 20160524
|
|
* Provide button response if MQTT connection lost
|
|
*
|
|
* 1.0.10 20160520
|
|
* Add optional button topic to assist external MQTT clients
|
|
* Change version notation
|
|
* Reset default values
|
|
*
|
|
* 1.0.9 20160503
|
|
* Add more blinks
|
|
* Add reset 2 option erasing flash
|
|
* Add status 5 option displaying network info
|
|
* Add syslog check for Wifi connection
|
|
* Resize mqtt_publish log array
|
|
* Change Wifi smartconfig active from 100 to 60 seconds
|
|
* Update Wifi initialization
|
|
*
|
|
* 1.0.8 20160430
|
|
* Remove use of Wifi config data from SDK
|
|
* Add status 3 (syslog info) and status 4 (flash info)
|
|
* Add restart option to button (5 quick presses)
|
|
*
|
|
* 1.0.7 20160420
|
|
* Add UDP syslog support
|
|
* Change HOST command to MQTTHOST command
|
|
* Add commands SYSLOG, SERIALLOG and LOGHOST
|
|
* Change hostname to lower case to distinguise between open-sdk version
|
|
* Add support for ESP-12F used in my modified wkaku power socket switch
|
|
* Fix timezone command
|
|
* Add RTC month names for future use
|
|
* Modify button code
|
|
* Remove initialization errors by better use of MQTT loop
|
|
*
|
|
* 1.0.6 20160406
|
|
* Removed Wifi AP mode (#1)
|
|
* Add test for Arduino IDE version >= 1.6.8
|
|
* Fix RTC time sync code
|
|
*
|
|
* 1.0.5 20160310
|
|
* Initial public release
|
|
* Show debug info by selecting option from IDE Tools Debug port: Serial
|
|
*/
|